Merge tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next

Pull networking updates from Jakub Kicinski:
 "Core & protocols:

   - Wrap datapath globals into net_aligned_data, to avoid false sharing

   - Preserve MSG_ZEROCOPY in forwarding (e.g. out of a container)

   - Add SO_INQ and SCM_INQ support to AF_UNIX

   - Add SIOCINQ support to AF_VSOCK

   - Add TCP_MAXSEG sockopt to MPTCP

   - Add IPv6 force_forwarding sysctl to enable forwarding per interface

   - Make TCP validation of whether packet fully fits in the receive
     window and the rcv_buf more strict. With increased use of HW
     aggregation a single "packet" can be multiple 100s of kB

   - Add MSG_MORE flag to optimize large TCP transmissions via sockmap,
     improves latency up to 33% for sockmap users

   - Convert TCP send queue handling from tasklet to BH workque

   - Improve BPF iteration over TCP sockets to see each socket exactly
     once

   - Remove obsolete and unused TCP RFC3517/RFC6675 loss recovery code

   - Support enabling kernel threads for NAPI processing on per-NAPI
     instance basis rather than a whole device. Fully stop the kernel
     NAPI thread when threaded NAPI gets disabled. Previously thread
     would stick around until ifdown due to tricky synchronization

   - Allow multicast routing to take effect on locally-generated packets

   - Add output interface argument for End.X in segment routing

   - MCTP: add support for gateway routing, improve bind() handling

   - Don't require rtnl_lock when fetching an IPv6 neighbor over Netlink

   - Add a new neighbor flag ("extern_valid"), which cedes refresh
     responsibilities to userspace. This is needed for EVPN multi-homing
     where a neighbor entry for a multi-homed host needs to be synced
     across all the VTEPs among which the host is multi-homed

   - Support NUD_PERMANENT for proxy neighbor entries

   - Add a new queuing discipline for IETF RFC9332 DualQ Coupled AQM

   - Add sequence numbers to netconsole messages. Unregister
     netconsole's console when all net targets are removed. Code
     refactoring. Add a number of selftests

   - Align IPSec inbound SA lookup to RFC 4301. Only SPI and protocol
     should be used for an inbound SA lookup

   - Support inspecting ref_tracker state via DebugFS

   - Don't force bonding advertisement frames tx to ~333 ms boundaries.
     Add broadcast_neighbor option to send ARP/ND on all bonded links

   - Allow providing upcall pid for the 'execute' command in openvswitch

   - Remove DCCP support from Netfilter's conntrack

   - Disallow multiple packet duplications in the queuing layer

   - Prevent use of deprecated iptables code on PREEMPT_RT

  Driver API:

   - Support RSS and hashing configuration over ethtool Netlink

   - Add dedicated ethtool callbacks for getting and setting hashing
     fields

   - Add support for power budget evaluation strategy in PSE /
     Power-over-Ethernet. Generate Netlink events for overcurrent etc

   - Support DPLL phase offset monitoring across all device inputs.
     Support providing clock reference and SYNC over separate DPLL
     inputs

   - Support traffic classes in devlink rate API for bandwidth
     management

   - Remove rtnl_lock dependency from UDP tunnel port configuration

  Device drivers:

   - Add a new Broadcom driver for 800G Ethernet (bnge)

   - Add a standalone driver for Microchip ZL3073x DPLL

   - Remove IBM's NETIUCV device driver

   - Ethernet high-speed NICs:
      - Broadcom (bnxt):
         - support zero-copy Tx of DMABUF memory
         - take page size into account for page pool recycling rings
      - Intel (100G, ice, idpf):
         - idpf: XDP and AF_XDP support preparations
         - idpf: add flow steering
         - add link_down_events statistic
         - clean up the TSPLL code
         - preparations for live VM migration
      - nVidia/Mellanox:
         - support zero-copy Rx/Tx interfaces (DMABUF and io_uring)
         - optimize context memory usage for matchers
         - expose serial numbers in devlink info
         - support PCIe congestion metrics
      - Meta (fbnic):
         - add 25G, 50G, and 100G link modes to phylink
         - support dumping FW logs
      - Marvell/Cavium:
         - support for CN20K generation of the Octeon chips
      - Amazon:
         - add HW clock (without timestamping, just hypervisor time access)

   - Ethernet virtual:
      - VirtIO net:
         - support segmentation of UDP-tunnel-encapsulated packets
      - Google (gve):
         - support packet timestamping and clock synchronization
      - Microsoft vNIC:
         - add handler for device-originated servicing events
         - allow dynamic MSI-X vector allocation
         - support Tx bandwidth clamping

   - Ethernet NICs consumer, and embedded:
      - AMD:
         - amd-xgbe: hardware timestamping and PTP clock support
      - Broadcom integrated MACs (bcmgenet, bcmasp):
         - use napi_complete_done() return value to support NAPI polling
         - add support for re-starting auto-negotiation
      - Broadcom switches (b53):
         - support BCM5325 switches
         - add bcm63xx EPHY power control
      - Synopsys (stmmac):
         - lots of code refactoring and cleanups
      - TI:
         - icssg-prueth: read firmware-names from device tree
         - icssg: PRP offload support
      - Microchip:
         - lan78xx: convert to PHYLINK for improved PHY and MAC management
         - ksz: add KSZ8463 switch support
      - Intel:
         - support similar queue priority scheme in multi-queue and
           time-sensitive networking (taprio)
         - support packet pre-emption in both
      - RealTek (r8169):
         - enable EEE at 5Gbps on RTL8126
      - Airoha:
         - add PPPoE offload support
         - MDIO bus controller for Airoha AN7583

   - Ethernet PHYs:
      - support for the IPQ5018 internal GE PHY
      - micrel KSZ9477 switch-integrated PHYs:
         - add MDI/MDI-X control support
         - add RX error counters
         - add cable test support
         - add Signal Quality Indicator (SQI) reporting
      - dp83tg720: improve reset handling and reduce link recovery time
      - support bcm54811 (and its MII-Lite interface type)
      - air_en8811h: support resume/suspend
      - support PHY counters for QCA807x and QCA808x
      - support WoL for QCA807x

   - CAN drivers:
      - rcar_canfd: support for Transceiver Delay Compensation
      - kvaser: report FW versions via devlink dev info

   - WiFi:
      - extended regulatory info support (6 GHz)
      - add statistics and beacon monitor for Multi-Link Operation (MLO)
      - support S1G aggregation, improve S1G support
      - add Radio Measurement action fields
      - support per-radio RTS threshold
      - some work around how FIPS affects wifi, which was wrong (RC4 is
        used by TKIP, not only WEP)
      - improvements for unsolicited probe response handling

   - WiFi drivers:
      - RealTek (rtw88):
         - IBSS mode for SDIO devices
      - RealTek (rtw89):
         - BT coexistence for MLO/WiFi7
         - concurrent station + P2P support
         - support for USB devices RTL8851BU/RTL8852BU
      - Intel (iwlwifi):
         - use embedded PNVM in (to be released) FW images to fix
           compatibility issues
         - many cleanups (unused FW APIs, PCIe code, WoWLAN)
         - some FIPS interoperability
      - MediaTek (mt76):
         - firmware recovery improvements
         - more MLO work
      - Qualcomm/Atheros (ath12k):
         - fix scan on multi-radio devices
         - more EHT/Wi-Fi 7 features
         - encapsulation/decapsulation offload
      - Broadcom (brcm80211):
         - support SDIO 43751 device

   - Bluetooth:
      - hci_event: add support for handling LE BIG Sync Lost event
      - ISO: add socket option to report packet seqnum via CMSG
      - ISO: support SCM_TIMESTAMPING for ISO TS

   - Bluetooth drivers:
      - intel_pcie: support Function Level Reset
      - nxpuart: add support for 4M baudrate
      - nxpuart: implement powerup sequence, reset, FW dump, and FW loading"

* tag 'net-next-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1742 commits)
  dpll: zl3073x: Fix build failure
  selftests: bpf: fix legacy netfilter options
  ipv6: annotate data-races around rt->fib6_nsiblings
  ipv6: fix possible infinite loop in fib6_info_uses_dev()
  ipv6: prevent infinite loop in rt6_nlmsg_size()
  ipv6: add a retry logic in net6_rt_notify()
  vrf: Drop existing dst reference in vrf_ip6_input_dst
  net/sched: taprio: align entry index attr validation with mqprio
  net: fsl_pq_mdio: use dev_err_probe
  selftests: rtnetlink.sh: remove esp4_offload after test
  vsock: remove unnecessary null check in vsock_getname()
  igb: xsk: solve negative overflow of nb_pkts in zerocopy mode
  stmmac: xsk: fix negative overflow of budget in zerocopy mode
  dt-bindings: ieee802154: Convert at86rf230.txt yaml format
  net: dsa: microchip: Disable PTP function of KSZ8463
  net: dsa: microchip: Setup fiber ports for KSZ8463
  net: dsa: microchip: Write switch MAC address differently for KSZ8463
  net: dsa: microchip: Use different registers for KSZ8463
  net: dsa: microchip: Add KSZ8463 switch support to KSZ DSA driver
  dt-bindings: net: dsa: microchip: Add KSZ8463 switch support
  ...

1 files changed, 33 insertions, 22 deletions

diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index c04e715a4c2a..a38ffbf4b3f0 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -461,7 +461,7 @@ static enum skb_state defer_bh(struct usbnet *dev, struct sk_buff *skb,
 
 	__skb_queue_tail(&dev->done, skb);
 	if (dev->done.qlen == 1)
-		tasklet_schedule(&dev->bh);
+		queue_work(system_bh_wq, &dev->bh_work);
 	spin_unlock(&dev->done.lock);
 	spin_unlock_irqrestore(&list->lock, flags);
 	return old_state;
@@ -549,7 +549,7 @@ static int rx_submit (struct usbnet *dev, struct urb *urb, gfp_t flags)
 		default:
 			netif_dbg(dev, rx_err, dev->net,
 				  "rx submit, %d\n", retval);
-			tasklet_schedule (&dev->bh);
+			queue_work(system_bh_wq, &dev->bh_work);
 			break;
 		case 0:
 			__usbnet_queue_skb(&dev->rxq, skb, rx_start);
@@ -709,7 +709,7 @@ void usbnet_resume_rx(struct usbnet *dev)
 		num++;
 	}
 
-	tasklet_schedule(&dev->bh);
+	queue_work(system_bh_wq, &dev->bh_work);
 
 	netif_dbg(dev, rx_status, dev->net,
 		  "paused rx queue disabled, %d skbs requeued\n", num);
@@ -778,7 +778,7 @@ void usbnet_unlink_rx_urbs(struct usbnet *dev)
 {
 	if (netif_running(dev->net)) {
 		(void) unlink_urbs (dev, &dev->rxq);
-		tasklet_schedule(&dev->bh);
+		queue_work(system_bh_wq, &dev->bh_work);
 	}
 }
 EXPORT_SYMBOL_GPL(usbnet_unlink_rx_urbs);
@@ -861,14 +861,14 @@ int usbnet_stop (struct net_device *net)
 	/* deferred work (timer, softirq, task) must also stop */
 	dev->flags = 0;
 	timer_delete_sync(&dev->delay);
-	tasklet_kill(&dev->bh);
+	cancel_work_sync(&dev->bh_work);
 	cancel_work_sync(&dev->kevent);
 
 	/* We have cyclic dependencies. Those calls are needed
 	 * to break a cycle. We cannot fall into the gaps because
 	 * we have a flag
 	 */
-	tasklet_kill(&dev->bh);
+	cancel_work_sync(&dev->bh_work);
 	timer_delete_sync(&dev->delay);
 	cancel_work_sync(&dev->kevent);
 
@@ -955,7 +955,7 @@ int usbnet_open (struct net_device *net)
 	clear_bit(EVENT_RX_KILL, &dev->flags);
 
 	// delay posting reads until we're fully open
-	tasklet_schedule (&dev->bh);
+	queue_work(system_bh_wq, &dev->bh_work);
 	if (info->manage_power) {
 		retval = info->manage_power(dev, 1);
 		if (retval < 0) {
@@ -1013,6 +1013,13 @@ int usbnet_get_link_ksettings_internal(struct net_device *net,
 	else
 		cmd->base.speed = SPEED_UNKNOWN;
 
+	/* The standard "Universal Serial Bus Class Definitions
+	 * for Communications Devices v1.2" does not specify
+	 * anything about duplex status.
+	 * So set it DUPLEX_UNKNOWN instead of default DUPLEX_HALF.
+	 */
+	cmd->base.duplex = DUPLEX_UNKNOWN;
+
 	return 0;
 }
 EXPORT_SYMBOL_GPL(usbnet_get_link_ksettings_internal);
@@ -1122,8 +1129,11 @@ static void __handle_link_change(struct usbnet *dev)
 		 * tx queue is stopped by netcore after link becomes off
 		 */
 	} else {
+		if (test_and_clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags))
+			netif_carrier_on(dev->net);
+
 		/* submitting URBs for reading packets */
-		tasklet_schedule(&dev->bh);
+		queue_work(system_bh_wq, &dev->bh_work);
 	}
 
 	/* hard_mtu or rx_urb_size may change during link change */
@@ -1198,11 +1208,11 @@ fail_halt:
 		} else {
 			clear_bit (EVENT_RX_HALT, &dev->flags);
 			if (!usbnet_going_away(dev))
-				tasklet_schedule(&dev->bh);
+				queue_work(system_bh_wq, &dev->bh_work);
 		}
 	}
 
-	/* tasklet could resubmit itself forever if memory is tight */
+	/* work could resubmit itself forever if memory is tight */
 	if (test_bit (EVENT_RX_MEMORY, &dev->flags)) {
 		struct urb	*urb = NULL;
 		int resched = 1;
@@ -1224,7 +1234,7 @@ fail_halt:
 fail_lowmem:
 			if (resched)
 				if (!usbnet_going_away(dev))
-					tasklet_schedule(&dev->bh);
+					queue_work(system_bh_wq, &dev->bh_work);
 		}
 	}
 
@@ -1325,7 +1335,7 @@ void usbnet_tx_timeout (struct net_device *net, unsigned int txqueue)
 	struct usbnet		*dev = netdev_priv(net);
 
 	unlink_urbs (dev, &dev->txq);
-	tasklet_schedule (&dev->bh);
+	queue_work(system_bh_wq, &dev->bh_work);
 	/* this needs to be handled individually because the generic layer
 	 * doesn't know what is sufficient and could not restore private
 	 * information if a remedy of an unconditional reset were used.
@@ -1547,7 +1557,7 @@ static inline void usb_free_skb(struct sk_buff *skb)
 
 /*-------------------------------------------------------------------------*/
 
-// tasklet (work deferred from completions, in_irq) or timer
+// work (work deferred from completions, in_irq) or timer
 
 static void usbnet_bh (struct timer_list *t)
 {
@@ -1601,16 +1611,16 @@ static void usbnet_bh (struct timer_list *t)
 					  "rxqlen %d --> %d\n",
 					  temp, dev->rxq.qlen);
 			if (dev->rxq.qlen < RX_QLEN(dev))
-				tasklet_schedule (&dev->bh);
+				queue_work(system_bh_wq, &dev->bh_work);
 		}
 		if (dev->txq.qlen < TX_QLEN (dev))
 			netif_wake_queue (dev->net);
 	}
 }
 
-static void usbnet_bh_tasklet(struct tasklet_struct *t)
+static void usbnet_bh_work(struct work_struct *work)
 {
-	struct usbnet *dev = from_tasklet(dev, t, bh);
+	struct usbnet *dev = from_work(dev, work, bh_work);
 
 	usbnet_bh(&dev->delay);
 }
@@ -1742,7 +1752,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	skb_queue_head_init (&dev->txq);
 	skb_queue_head_init (&dev->done);
 	skb_queue_head_init(&dev->rxq_pause);
-	tasklet_setup(&dev->bh, usbnet_bh_tasklet);
+	INIT_WORK(&dev->bh_work, usbnet_bh_work);
 	INIT_WORK (&dev->kevent, usbnet_deferred_kevent);
 	init_usb_anchor(&dev->deferred);
 	timer_setup(&dev->delay, usbnet_bh, 0);
@@ -1759,7 +1769,6 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	dev->hard_mtu = net->mtu + net->hard_header_len;
 	net->min_mtu = 0;
 	net->max_mtu = ETH_MAX_MTU;
-	net->pcpu_stat_type = NETDEV_PCPU_STAT_TSTATS;
 
 	net->netdev_ops = &usbnet_netdev_ops;
 	net->watchdog_timeo = TX_TIMEOUT_JIFFIES;
@@ -1971,7 +1980,7 @@ int usbnet_resume (struct usb_interface *intf)
 
 			if (!(dev->txq.qlen >= TX_QLEN(dev)))
 				netif_tx_wake_all_queues(dev->net);
-			tasklet_schedule (&dev->bh);
+			queue_work(system_bh_wq, &dev->bh_work);
 		}
 	}
 
@@ -2009,10 +2018,12 @@ EXPORT_SYMBOL(usbnet_manage_power);
 void usbnet_link_change(struct usbnet *dev, bool link, bool need_reset)
 {
 	/* update link after link is reseted */
-	if (link && !need_reset)
-		netif_carrier_on(dev->net);
-	else
+	if (link && !need_reset) {
+		set_bit(EVENT_LINK_CARRIER_ON, &dev->flags);
+	} else {
+		clear_bit(EVENT_LINK_CARRIER_ON, &dev->flags);
 		netif_carrier_off(dev->net);
+	}
 
 	if (need_reset && link)
 		usbnet_defer_kevent(dev, EVENT_LINK_RESET);