Merge Linus master into drm-next

The merge is clean, but the arm build fails afterwards,
due to API changes in the regulator tree.

I've included the patch into the merge to fix the build.

Signed-off-by: Dave Airlie <airlied@redhat.com>

8 files changed, 121 insertions, 39 deletions

diff --git a/drivers/net/usb/catc.c b/drivers/net/usb/catc.c
index 8cfc3bb0c6a6..4e2b26a88b15 100644
--- a/drivers/net/usb/catc.c
+++ b/drivers/net/usb/catc.c
@@ -641,7 +641,7 @@ static void catc_set_multicast_list(struct net_device *netdev)
 	u8 broadcast[ETH_ALEN];
 	u8 rx = RxEnable | RxPolarity | RxMultiCast;
 
-	memset(broadcast, 0xff, ETH_ALEN);
+	eth_broadcast_addr(broadcast);
 	memset(catc->multicast, 0, 64);
 
 	catc_multicast(broadcast, catc->multicast);
@@ -880,7 +880,7 @@ static int catc_probe(struct usb_interface *intf, const struct usb_device_id *id
 		
 		dev_dbg(dev, "Filling the multicast list.\n");
 	  
-		memset(broadcast, 0xff, ETH_ALEN);
+		eth_broadcast_addr(broadcast);
 		catc_multicast(broadcast, catc->multicast);
 		catc_multicast(netdev->dev_addr, catc->multicast);
 		catc_write_mem(catc, 0xfa80, catc->multicast, 64);
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 96fc8a5bde84..e4b7a47a825c 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -394,7 +394,7 @@ static struct sk_buff *cdc_mbim_process_dgram(struct usbnet *dev, u8 *buf, size_
 	skb_put(skb, ETH_HLEN);
 	skb_reset_mac_header(skb);
 	eth_hdr(skb)->h_proto = proto;
-	memset(eth_hdr(skb)->h_source, 0, ETH_ALEN);
+	eth_zero_addr(eth_hdr(skb)->h_source);
 	memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
 
 	/* add datagram */
diff --git a/drivers/net/usb/cx82310_eth.c b/drivers/net/usb/cx82310_eth.c
index 1762ad3910b2..e221bfcee76b 100644
--- a/drivers/net/usb/cx82310_eth.c
+++ b/drivers/net/usb/cx82310_eth.c
@@ -172,7 +172,7 @@ static int cx82310_bind(struct usbnet *dev, struct usb_interface *intf)
 		if (!ret && link[0] == 1 && link[2] == 1)
 			break;
 		msleep(500);
-	};
+	}
 	if (!timeout) {
 		dev_err(&udev->dev, "firmware not ready in time\n");
 		return -ETIMEDOUT;
diff --git a/drivers/net/usb/hso.c b/drivers/net/usb/hso.c
index 778e91531fac..111d907e0c11 100644
--- a/drivers/net/usb/hso.c
+++ b/drivers/net/usb/hso.c
@@ -1477,6 +1477,7 @@ static void tiocmget_intr_callback(struct urb *urb)
 	struct uart_icount *icount;
 	struct hso_serial_state_notification *serial_state_notification;
 	struct usb_device *usb;
+	struct usb_interface *interface;
 	int if_num;
 
 	/* Sanity checks */
@@ -1494,7 +1495,9 @@ static void tiocmget_intr_callback(struct urb *urb)
 	BUG_ON((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM);
 
 	usb = serial->parent->usb;
-	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
+	interface = serial->parent->interface;
+
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
 
 	/* wIndex should be the USB interface number of the port to which the
 	 * notification applies, which should always be the Modem port.
@@ -1675,6 +1678,7 @@ static int hso_serial_tiocmset(struct tty_struct *tty,
 	unsigned long flags;
 	int if_num;
 	struct hso_serial *serial = tty->driver_data;
+	struct usb_interface *interface;
 
 	/* sanity check */
 	if (!serial) {
@@ -1685,7 +1689,8 @@ static int hso_serial_tiocmset(struct tty_struct *tty,
 	if ((serial->parent->port_spec & HSO_PORT_MASK) != HSO_PORT_MODEM)
 		return -EINVAL;
 
-	if_num = serial->parent->interface->altsetting->desc.bInterfaceNumber;
+	interface = serial->parent->interface;
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
 
 	spin_lock_irqsave(&serial->serial_lock, flags);
 	if (set & TIOCM_RTS)
@@ -2808,7 +2813,7 @@ static int hso_get_config_data(struct usb_interface *interface)
 {
 	struct usb_device *usbdev = interface_to_usbdev(interface);
 	u8 *config_data = kmalloc(17, GFP_KERNEL);
-	u32 if_num = interface->altsetting->desc.bInterfaceNumber;
+	u32 if_num = interface->cur_altsetting->desc.bInterfaceNumber;
 	s32 result;
 
 	if (!config_data)
@@ -2886,7 +2891,7 @@ static int hso_probe(struct usb_interface *interface,
 		return -ENODEV;
 	}
 
-	if_num = interface->altsetting->desc.bInterfaceNumber;
+	if_num = interface->cur_altsetting->desc.bInterfaceNumber;
 
 	/* Get the interface/port specification from either driver_info or from
 	 * the device itself */
diff --git a/drivers/net/usb/lg-vl600.c b/drivers/net/usb/lg-vl600.c
index 8f37efd2d2fb..5714107533bb 100644
--- a/drivers/net/usb/lg-vl600.c
+++ b/drivers/net/usb/lg-vl600.c
@@ -201,7 +201,7 @@ static int vl600_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 					&buf->data[sizeof(*ethhdr) + 0x12],
 					ETH_ALEN);
 		} else {
-			memset(ethhdr->h_source, 0, ETH_ALEN);
+			eth_zero_addr(ethhdr->h_source);
 			memcpy(ethhdr->h_dest, dev->net->dev_addr, ETH_ALEN);
 
 			/* Inbound IPv6 packets have an IPv4 ethertype (0x800)
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 602dc6668c3a..f603f362504b 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -108,7 +108,7 @@ static int qmi_wwan_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
 	skb_push(skb, ETH_HLEN);
 	skb_reset_mac_header(skb);
 	eth_hdr(skb)->h_proto = proto;
-	memset(eth_hdr(skb)->h_source, 0, ETH_ALEN);
+	eth_zero_addr(eth_hdr(skb)->h_source);
 fix_dest:
 	memcpy(eth_hdr(skb)->h_dest, dev->net->dev_addr, ETH_ALEN);
 	return 1;
diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 9f7c0ab3b349..ac4d03b328b1 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -104,7 +104,8 @@
 #define USB_TX_AGG		0xd40a
 #define USB_RX_BUF_TH		0xd40c
 #define USB_USB_TIMER		0xd428
-#define USB_RX_EARLY_AGG	0xd42c
+#define USB_RX_EARLY_TIMEOUT	0xd42c
+#define USB_RX_EARLY_SIZE	0xd42e
 #define USB_PM_CTRL_STATUS	0xd432
 #define USB_TX_DMA		0xd434
 #define USB_TOLERANCE		0xd490
@@ -349,10 +350,10 @@
 /* USB_MISC_0 */
 #define PCUT_STATUS		0x0001
 
-/* USB_RX_EARLY_AGG */
-#define EARLY_AGG_SUPPER	0x0e832981
-#define EARLY_AGG_HIGH		0x0e837a12
-#define EARLY_AGG_SLOW		0x0e83ffff
+/* USB_RX_EARLY_TIMEOUT */
+#define COALESCE_SUPER		 85000U
+#define COALESCE_HIGH		250000U
+#define COALESCE_SLOW		524280U
 
 /* USB_WDT11_CTRL */
 #define TIMER11_EN		0x0001
@@ -607,6 +608,7 @@ struct r8152 {
 	u32 saved_wolopts;
 	u32 msg_enable;
 	u32 tx_qlen;
+	u32 coalesce;
 	u16 ocp_base;
 	u8 *intr_buff;
 	u8 version;
@@ -2143,28 +2145,19 @@ static int rtl8152_enable(struct r8152 *tp)
 	return rtl_enable(tp);
 }
 
-static void r8153_set_rx_agg(struct r8152 *tp)
+static void r8153_set_rx_early_timeout(struct r8152 *tp)
 {
-	u8 speed;
+	u32 ocp_data = tp->coalesce / 8;
 
-	speed = rtl8152_get_speed(tp);
-	if (speed & _1000bps) {
-		if (tp->udev->speed == USB_SPEED_SUPER) {
-			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
-					RX_THR_SUPPER);
-			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
-					EARLY_AGG_SUPPER);
-		} else {
-			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH,
-					RX_THR_HIGH);
-			ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
-					EARLY_AGG_HIGH);
-		}
-	} else {
-		ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_BUF_TH, RX_THR_SLOW);
-		ocp_write_dword(tp, MCU_TYPE_USB, USB_RX_EARLY_AGG,
-				EARLY_AGG_SLOW);
-	}
+	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_TIMEOUT, ocp_data);
+}
+
+static void r8153_set_rx_early_size(struct r8152 *tp)
+{
+	u32 mtu = tp->netdev->mtu;
+	u32 ocp_data = (agg_buf_sz - mtu - VLAN_ETH_HLEN - VLAN_HLEN) / 4;
+
+	ocp_write_word(tp, MCU_TYPE_USB, USB_RX_EARLY_SIZE, ocp_data);
 }
 
 static int rtl8153_enable(struct r8152 *tp)
@@ -2174,7 +2167,8 @@ static int rtl8153_enable(struct r8152 *tp)
 
 	set_tx_qlen(tp);
 	rtl_set_eee_plus(tp);
-	r8153_set_rx_agg(tp);
+	r8153_set_rx_early_timeout(tp);
+	r8153_set_rx_early_size(tp);
 
 	return rtl_enable(tp);
 }
@@ -3720,6 +3714,61 @@ out:
 	return ret;
 }
 
+static int rtl8152_get_coalesce(struct net_device *netdev,
+				struct ethtool_coalesce *coalesce)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+		return -EOPNOTSUPP;
+	default:
+		break;
+	}
+
+	coalesce->rx_coalesce_usecs = tp->coalesce;
+
+	return 0;
+}
+
+static int rtl8152_set_coalesce(struct net_device *netdev,
+				struct ethtool_coalesce *coalesce)
+{
+	struct r8152 *tp = netdev_priv(netdev);
+	int ret;
+
+	switch (tp->version) {
+	case RTL_VER_01:
+	case RTL_VER_02:
+		return -EOPNOTSUPP;
+	default:
+		break;
+	}
+
+	if (coalesce->rx_coalesce_usecs > COALESCE_SLOW)
+		return -EINVAL;
+
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&tp->control);
+
+	if (tp->coalesce != coalesce->rx_coalesce_usecs) {
+		tp->coalesce = coalesce->rx_coalesce_usecs;
+
+		if (netif_running(tp->netdev) && netif_carrier_ok(netdev))
+			r8153_set_rx_early_timeout(tp);
+	}
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+	return ret;
+}
+
 static struct ethtool_ops ops = {
 	.get_drvinfo = rtl8152_get_drvinfo,
 	.get_settings = rtl8152_get_settings,
@@ -3733,6 +3782,8 @@ static struct ethtool_ops ops = {
 	.get_strings = rtl8152_get_strings,
 	.get_sset_count = rtl8152_get_sset_count,
 	.get_ethtool_stats = rtl8152_get_ethtool_stats,
+	.get_coalesce = rtl8152_get_coalesce,
+	.set_coalesce = rtl8152_set_coalesce,
 	.get_eee = rtl_ethtool_get_eee,
 	.set_eee = rtl_ethtool_set_eee,
 };
@@ -3784,6 +3835,7 @@ out:
 static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
 {
 	struct r8152 *tp = netdev_priv(dev);
+	int ret;
 
 	switch (tp->version) {
 	case RTL_VER_01:
@@ -3796,9 +3848,22 @@ static int rtl8152_change_mtu(struct net_device *dev, int new_mtu)
 	if (new_mtu < 68 || new_mtu > RTL8153_MAX_MTU)
 		return -EINVAL;
 
+	ret = usb_autopm_get_interface(tp->intf);
+	if (ret < 0)
+		return ret;
+
+	mutex_lock(&tp->control);
+
 	dev->mtu = new_mtu;
 
-	return 0;
+	if (netif_running(dev) && netif_carrier_ok(dev))
+		r8153_set_rx_early_size(tp);
+
+	mutex_unlock(&tp->control);
+
+	usb_autopm_put_interface(tp->intf);
+
+	return ret;
 }
 
 static const struct net_device_ops rtl8152_netdev_ops = {
@@ -3967,6 +4032,18 @@ static int rtl8152_probe(struct usb_interface *intf,
 	tp->mii.reg_num_mask = 0x1f;
 	tp->mii.phy_id = R8152_PHY_ID;
 
+	switch (udev->speed) {
+	case USB_SPEED_SUPER:
+		tp->coalesce = COALESCE_SUPER;
+		break;
+	case USB_SPEED_HIGH:
+		tp->coalesce = COALESCE_HIGH;
+		break;
+	default:
+		tp->coalesce = COALESCE_SLOW;
+		break;
+	}
+
 	intf->needs_remote_wakeup = 1;
 
 	tp->rtl_ops.init(tp);
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index 777757ae1973..733f4feb2ef3 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -1072,7 +1072,7 @@ static void __handle_set_rx_mode(struct usbnet *dev)
  * especially now that control transfers can be queued.
  */
 static void
-kevent (struct work_struct *work)
+usbnet_deferred_kevent (struct work_struct *work)
 {
 	struct usbnet		*dev =
 		container_of(work, struct usbnet, kevent);
@@ -1626,7 +1626,7 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
 	skb_queue_head_init(&dev->rxq_pause);
 	dev->bh.func = usbnet_bh;
 	dev->bh.data = (unsigned long) dev;
-	INIT_WORK (&dev->kevent, kevent);
+	INIT_WORK (&dev->kevent, usbnet_deferred_kevent);
 	init_usb_anchor(&dev->deferred);
 	dev->delay.function = usbnet_bh;
 	dev->delay.data = (unsigned long) dev;