Merge series "Support ROHM BD9576MUF and BD9573MUF PMICs" from Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>:

Initial support for ROHM BD9576MUF and BD9573MUF PMICs.

These PMICs are primarily intended to be used to power the R-Car family
processors. BD9576MUF includes some additional safety features the
BD9573MUF does not have. This initial version of drivers does not
utilize these features and for now the SW behaviour is identical.

Please note that this version of drivers is only tested on BD9576MUF
but according to the data-sheets the relevant parts of registers should
be same so drivers should also work on BD9573MUF.

This patch series includes MFD, watchdog and regulator drivers with
basic functionality such as:

- Enabling and pinging the watchdog
- configuring watchog timeout / window from device-tree
- reading regulator states/voltages
- enabling/disabling VOUT1 (VD50) when control mode B is used.

This patch series does not bring interrupt support. BD9576MUF and BD9573MUF
are designed to keep the IRQ line low for whole duration of error
condition. IRQ can't be 'acked'. So proper IRQ support would require
some IRQ limiter implementation (delayed unmask?) in order to not hog
the CPU.

---

Matti Vaittinen (6):
  dt_bindings: mfd: Add ROHM BD9576MUF and BD9573MUF PMICs
  dt_bindings: regulator: Add ROHM BD9576MUF and BD9573MUF PMICs
  mfd: Support ROHM BD9576MUF and BD9573MUF
  wdt: Support wdt on ROHM BD9576MUF and BD9573MUF
  regulator: Support ROHM BD9576MUF and BD9573MUF
  MAINTAINERS: Add ROHM BD9576MUF and BD9573MUF drivers

 .../bindings/mfd/rohm,bd9576-pmic.yaml        | 129 +++++++
 .../regulator/rohm,bd9576-regulator.yaml      |  33 ++
 MAINTAINERS                                   |   4 +
 drivers/mfd/Kconfig                           |  11 +
 drivers/mfd/Makefile                          |   1 +
 drivers/mfd/rohm-bd9576.c                     | 130 +++++++
 drivers/regulator/Kconfig                     |  10 +
 drivers/regulator/Makefile                    |   1 +
 drivers/regulator/bd9576-regulator.c          | 337 ++++++++++++++++++
 drivers/watchdog/Kconfig                      |  13 +
 drivers/watchdog/Makefile                     |   1 +
 drivers/watchdog/bd9576_wdt.c                 | 295 +++++++++++++++
 include/linux/mfd/rohm-bd957x.h               |  61 ++++
 include/linux/mfd/rohm-generic.h              |   2 +
 14 files changed, 1028 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mfd/rohm,bd9576-pmic.yaml
 create mode 100644 Documentation/devicetree/bindings/regulator/rohm,bd9576-regulator.yaml
 create mode 100644 drivers/mfd/rohm-bd9576.c
 create mode 100644 drivers/regulator/bd9576-regulator.c
 create mode 100644 drivers/watchdog/bd9576_wdt.c
 create mode 100644 include/linux/mfd/rohm-bd957x.h

base-commit: f4d51dffc6c01a9e94650d95ce0104964f8ae822
--
2.21.0

--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND

~~~ "I don't think so," said Rene Descartes. Just then he vanished ~~~
Simon says - in Latin please.
~~~ "non cogito me" dixit Rene Descarte, deinde evanescavit ~~~
Thanks to Simon Glass for the translation =]

1 files changed, 17 insertions, 8 deletions

diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h
index 46881d902124..ed9bea924dc3 100644
--- a/include/linux/skbuff.h
+++ b/include/linux/skbuff.h
@@ -71,7 +71,7 @@
  *	NETIF_F_IPV6_CSUM - Driver (device) is only able to checksum plain
  *			  TCP or UDP packets over IPv6. These are specifically
  *			  unencapsulated packets of the form IPv6|TCP or
- *			  IPv4|UDP where the Next Header field in the IPv6
+ *			  IPv6|UDP where the Next Header field in the IPv6
  *			  header is either TCP or UDP. IPv6 extension headers
  *			  are not supported with this feature. This feature
  *			  cannot be set in features for a device with
@@ -1056,7 +1056,16 @@ void kfree_skb(struct sk_buff *skb);
 void kfree_skb_list(struct sk_buff *segs);
 void skb_dump(const char *level, const struct sk_buff *skb, bool full_pkt);
 void skb_tx_error(struct sk_buff *skb);
+
+#ifdef CONFIG_TRACEPOINTS
 void consume_skb(struct sk_buff *skb);
+#else
+static inline void consume_skb(struct sk_buff *skb)
+{
+	return kfree_skb(skb);
+}
+#endif
+
 void __consume_stateless_skb(struct sk_buff *skb);
 void  __kfree_skb(struct sk_buff *skb);
 extern struct kmem_cache *skbuff_head_cache;
@@ -2658,7 +2667,7 @@ static inline int pskb_network_may_pull(struct sk_buff *skb, unsigned int len)
  *
  * Using max(32, L1_CACHE_BYTES) makes sense (especially with RPS)
  * to reduce average number of cache lines per packet.
- * get_rps_cpus() for example only access one 64 bytes aligned block :
+ * get_rps_cpu() for example only access one 64 bytes aligned block :
  * NET_IP_ALIGN(2) + ethernet_header(14) + IP_header(20/40) + ports(8)
  */
 #ifndef NET_SKB_PAD
@@ -3745,19 +3754,19 @@ static inline bool __skb_metadata_differs(const struct sk_buff *skb_a,
 #define __it(x, op) (x -= sizeof(u##op))
 #define __it_diff(a, b, op) (*(u##op *)__it(a, op)) ^ (*(u##op *)__it(b, op))
 	case 32: diffs |= __it_diff(a, b, 64);
-		 /* fall through */
+		fallthrough;
 	case 24: diffs |= __it_diff(a, b, 64);
-		 /* fall through */
+		fallthrough;
 	case 16: diffs |= __it_diff(a, b, 64);
-		 /* fall through */
+		fallthrough;
 	case  8: diffs |= __it_diff(a, b, 64);
 		break;
 	case 28: diffs |= __it_diff(a, b, 64);
-		 /* fall through */
+		fallthrough;
 	case 20: diffs |= __it_diff(a, b, 64);
-		 /* fall through */
+		fallthrough;
 	case 12: diffs |= __it_diff(a, b, 64);
-		 /* fall through */
+		fallthrough;
 	case  4: diffs |= __it_diff(a, b, 32);
 		break;
 	}