Merge branch 'mlxsw-rif-mac-prefixes'

Ido Schimmel says:

====================
mlxsw: Support multiple RIF MAC prefixes

Currently, mlxsw enforces that all the netdevs used as router interfaces
(RIFs) have the same MAC prefix (e.g., same 38 MSBs in Spectrum-1).
Otherwise, an error is returned to user space with extack. This patchset
relaxes the limitation through the use of RIF MAC profiles.

A RIF MAC profile is a hardware entity that represents a particular MAC
prefix which multiple RIFs can reference. Therefore, the number of
possible MAC prefixes is no longer one, but the number of profiles
supported by the device.

The ability to change the MAC of a particular netdev is useful, for
example, for users who use the netdev to connect to an upstream provider
that performs MAC filtering. Currently, such users are either forced to
negotiate with the provider or change the MAC address of all other
netdevs so that they share the same prefix.

Patchset overview:

Patches #1-#3 are preparations.

Patch #4 adds actual support for RIF MAC profiles.

Patch #5 exposes RIF MAC profiles as a devlink resource, so that user
space has visibility into the maximum number of profiles and current
occupancy. Useful for debugging and testing (next 3 patches).

Patches #6-#8 add both scale and functional tests.

Patch #9 removes tests that validated the previous limitation. It is now
covered by patch #6 for devices that support a single profile.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

8 files changed, 436 insertions, 92 deletions

diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profile_scale.sh
new file mode 100644
index 000000000000..71e7681f15f6
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profile_scale.sh
@@ -0,0 +1,72 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+# Test for RIF MAC profiles resource. The test adds VLAN netdevices according to
+# the maximum number of RIF MAC profiles, sets each of them with a random
+# MAC address, and checks that eventually the number of occupied RIF MAC
+# profiles equals the maximum number of RIF MAC profiles.
+
+
+RIF_MAC_PROFILE_NUM_NETIFS=2
+
+rif_mac_profiles_create()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+	local batch_file="$(mktemp)"
+
+	for ((i = 1; i <= count; i++)); do
+		vlan=$(( i*10 ))
+		m=$(( i*11 ))
+
+		cat >> $batch_file <<-EOF
+			link add link $h1 name $h1.$vlan \
+				address 00:$m:$m:$m:$m:$m type vlan id $vlan
+			address add 192.0.$m.1/24 dev $h1.$vlan
+		EOF
+	done
+
+	ip -b $batch_file &> /dev/null
+	check_err_fail $should_fail $? "RIF creation"
+
+	rm -f $batch_file
+}
+
+rif_mac_profile_test()
+{
+	local count=$1; shift
+	local should_fail=$1; shift
+
+	rif_mac_profiles_create $count $should_fail
+
+	occ=$(devlink -j resource show $DEVLINK_DEV \
+	      | jq '.[][][] | select(.name=="rif_mac_profiles") |.["occ"]')
+
+	[[ $occ -eq $count ]]
+	check_err_fail $should_fail $? "Attempt to use $count profiles (actual result $occ)"
+}
+
+rif_mac_profile_setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	# Disable IPv6 on the two interfaces to avoid IPv6 link-local addresses
+	# being generated and RIFs being created.
+	sysctl_set net.ipv6.conf.$h1.disable_ipv6 1
+	sysctl_set net.ipv6.conf.$h2.disable_ipv6 1
+
+	ip link set $h1 up
+	ip link set $h2 up
+}
+
+rif_mac_profile_cleanup()
+{
+	pre_cleanup
+
+	ip link set $h2 down
+	ip link set $h1 down
+
+	sysctl_restore net.ipv6.conf.$h2.disable_ipv6
+	sysctl_restore net.ipv6.conf.$h1.disable_ipv6
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles.sh
new file mode 100755
index 000000000000..c18340cee55d
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles.sh
@@ -0,0 +1,213 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	mac_profile_test
+"
+NUM_NETIFS=4
+source $lib_dir/lib.sh
+source $lib_dir/tc_common.sh
+source $lib_dir/devlink_lib.sh
+
+h1_create()
+{
+	simple_if_init $h1 192.0.2.1/24
+	ip route add 198.51.100.0/24 vrf v$h1 nexthop via 192.0.2.2
+
+	tc qdisc add dev $h1 ingress
+}
+
+h1_destroy()
+{
+	tc qdisc del dev $h1 ingress
+
+	ip route del 198.51.100.0/24 vrf v$h1
+	simple_if_fini $h1 192.0.2.1/24
+}
+
+h2_create()
+{
+	simple_if_init $h2 198.51.100.1/24
+	ip route add 192.0.2.0/24 vrf v$h2 nexthop via 198.51.100.2
+
+	tc qdisc add dev $h2 ingress
+}
+
+h2_destroy()
+{
+	tc qdisc del dev $h2 ingress
+
+	ip route del 192.0.2.0/24 vrf v$h2
+	simple_if_fini $h2 198.51.100.1/24
+}
+
+router_create()
+{
+	ip link set dev $rp1 up
+	ip link set dev $rp2 up
+
+	tc qdisc add dev $rp1 clsact
+	tc qdisc add dev $rp2 clsact
+	ip address add 192.0.2.2/24 dev $rp1
+	ip address add 198.51.100.2/24 dev $rp2
+}
+
+router_destroy()
+{
+	ip address del 198.51.100.2/24 dev $rp2
+	ip address del 192.0.2.2/24 dev $rp1
+	tc qdisc del dev $rp2 clsact
+	tc qdisc del dev $rp1 clsact
+
+	ip link set dev $rp2 down
+	ip link set dev $rp1 down
+}
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	rp1=${NETIFS[p2]}
+
+	rp2=${NETIFS[p3]}
+	h2=${NETIFS[p4]}
+
+	vrf_prepare
+
+	h1_create
+	h2_create
+
+	router_create
+
+	forwarding_enable
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	forwarding_restore
+
+	router_destroy
+
+	h2_destroy
+	h1_destroy
+
+	vrf_cleanup
+}
+
+h1_to_h2()
+{
+	local test_name=$@; shift
+	local smac=$(mac_get $rp2)
+
+	RET=0
+
+	# Replace neighbour to avoid first packet being forwarded in software
+	ip neigh replace dev $rp2 198.51.100.1 lladdr $(mac_get $h2)
+
+	# Add a filter to ensure that packets are forwarded in hardware. Cannot
+	# match on source MAC because it is not set in eACL after routing
+	tc filter add dev $rp2 egress proto ip pref 1 handle 101 \
+		flower skip_sw ip_proto udp src_port 12345 dst_port 54321 \
+		action pass
+
+	# Add a filter to ensure that packets are received with the correct
+	# source MAC
+	tc filter add dev $h2 ingress proto ip pref 1 handle 101 \
+		flower skip_sw src_mac $smac ip_proto udp src_port 12345 \
+		dst_port 54321 action pass
+
+	$MZ $h1 -a own -b $(mac_get $rp1) -t udp "sp=12345,dp=54321" \
+		-A 192.0.2.1 -B 198.51.100.1 -c 10 -p 100 -d 1msec -q
+
+	tc_check_packets "dev $rp2 egress" 101 10
+	check_err $? "packets not forwarded in hardware"
+
+	tc_check_packets "dev $h2 ingress" 101 10
+	check_err $? "packets not forwarded with correct source mac"
+
+	log_test "h1->h2: $test_name"
+
+	tc filter del dev $h2 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $rp2 egress protocol ip pref 1 handle 101 flower
+	ip neigh del dev $rp2 198.51.100.1 lladdr $(mac_get $h2)
+}
+
+h2_to_h1()
+{
+	local test_name=$@; shift
+	local rp1_mac=$(mac_get $rp1)
+
+	RET=0
+
+	ip neigh replace dev $rp1 192.0.2.1 lladdr $(mac_get $h1)
+
+	tc filter add dev $rp1 egress proto ip pref 1 handle 101 \
+		flower skip_sw ip_proto udp src_port 54321 dst_port 12345 \
+		action pass
+
+	tc filter add dev $h1 ingress proto ip pref 1 handle 101 \
+		flower skip_sw src_mac $rp1_mac ip_proto udp src_port 54321 \
+		dst_port 12345 action pass
+
+	$MZ $h2 -a own -b $(mac_get $rp2) -t udp "sp=54321,dp=12345" \
+		-A 198.51.100.1 -B 192.0.2.1 -c 10 -p 100 -d 1msec -q
+
+	tc_check_packets "dev $rp1 egress" 101 10
+	check_err $? "packets not forwarded in hardware"
+
+	tc_check_packets "dev $h1 ingress" 101 10
+	check_err $? "packets not forwarded with correct source mac"
+
+	log_test "h2->h1: $test_name"
+
+	tc filter del dev $h1 ingress protocol ip pref 1 handle 101 flower
+	tc filter del dev $rp1 egress protocol ip pref 1 handle 101 flower
+	ip neigh del dev $rp1 192.0.2.1 lladdr $(mac_get $h1)
+}
+
+smac_test()
+{
+	local test_name=$@; shift
+
+	# Test that packets forwarded to $h2 via $rp2 are forwarded with the
+	# current source MAC of $rp2
+	h1_to_h2 $test_name
+
+	# Test that packets forwarded to $h1 via $rp1 are forwarded with the
+	# current source MAC of $rp1. This MAC is never changed during the test,
+	# but given the shared nature of MAC profile, the point is to see that
+	# changes to the MAC of $rp2 do not affect that of $rp1
+	h2_to_h1 $test_name
+}
+
+mac_profile_test()
+{
+	local rp2_mac=$(mac_get $rp2)
+
+	# Test behavior when the RIF backing $rp2 is transitioned to use
+	# a new MAC profile
+	ip link set dev $rp2 addr 00:11:22:33:44:55
+	smac_test "new mac profile"
+
+	# Test behavior when the MAC profile used by the RIF is edited
+	ip link set dev $rp2 address 00:22:22:22:22:22
+	smac_test "edit mac profile"
+
+	# Restore original MAC
+	ip link set dev $rp2 addr $rp2_mac
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+mac_profiles=$(devlink_resource_size_get rif_mac_profiles)
+if [[ $mac_profiles -ne 1 ]]; then
+	tests_run
+fi
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles_occ.sh b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles_occ.sh
new file mode 100755
index 000000000000..b513f64d9092
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/rif_mac_profiles_occ.sh
@@ -0,0 +1,117 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+lib_dir=$(dirname $0)/../../../net/forwarding
+
+ALL_TESTS="
+	rif_mac_profile_edit_test
+"
+NUM_NETIFS=2
+source $lib_dir/lib.sh
+source $lib_dir/devlink_lib.sh
+
+setup_prepare()
+{
+	h1=${NETIFS[p1]}
+	h2=${NETIFS[p2]}
+
+	# Disable IPv6 on the two interfaces to avoid IPv6 link-local addresses
+	# being generated and RIFs being created
+	sysctl_set net.ipv6.conf.$h1.disable_ipv6 1
+	sysctl_set net.ipv6.conf.$h2.disable_ipv6 1
+
+	ip link set $h1 up
+	ip link set $h2 up
+}
+
+cleanup()
+{
+	pre_cleanup
+
+	ip link set $h2 down
+	ip link set $h1 down
+
+	sysctl_restore net.ipv6.conf.$h2.disable_ipv6
+	sysctl_restore net.ipv6.conf.$h1.disable_ipv6
+
+	# Reload in order to clean all the RIFs and RIF MAC profiles created
+	devlink_reload
+}
+
+create_max_rif_mac_profiles()
+{
+	local count=$1; shift
+	local batch_file="$(mktemp)"
+
+	for ((i = 1; i <= count; i++)); do
+		vlan=$(( i*10 ))
+		m=$(( i*11 ))
+
+		cat >> $batch_file <<-EOF
+			link add link $h1 name $h1.$vlan \
+				address 00:$m:$m:$m:$m:$m type vlan id $vlan
+			address add 192.0.$m.1/24 dev $h1.$vlan
+		EOF
+	done
+
+	ip -b $batch_file &> /dev/null
+	rm -f $batch_file
+}
+
+rif_mac_profile_replacement_test()
+{
+	local h1_10_mac=$(mac_get $h1.10)
+
+	RET=0
+
+	ip link set $h1.10 address 00:12:34:56:78:99
+	check_err $?
+
+	log_test "RIF MAC profile replacement"
+
+	ip link set $h1.10 address $h1_10_mac
+}
+
+rif_mac_profile_shared_replacement_test()
+{
+	local count=$1; shift
+	local i=$((count + 1))
+	local vlan=$(( i*10 ))
+	local m=11
+
+	RET=0
+
+	# Create a VLAN netdevice that has the same MAC as the first one.
+	ip link add link $h1 name $h1.$vlan address 00:$m:$m:$m:$m:$m \
+		type vlan id $vlan
+	ip address add 192.0.$m.1/24 dev $h1.$vlan
+
+	# MAC replacement should fail because all the MAC profiles are in use
+	# and the profile is shared between multiple RIFs
+	m=$(( i*11 ))
+	ip link set $h1.$vlan address 00:$m:$m:$m:$m:$m &> /dev/null
+	check_fail $?
+
+	log_test "RIF MAC profile shared replacement"
+
+	ip link del dev $h1.$vlan
+}
+
+rif_mac_profile_edit_test()
+{
+	local count=$(devlink_resource_size_get rif_mac_profiles)
+
+	create_max_rif_mac_profiles $count
+
+	rif_mac_profile_replacement_test
+	rif_mac_profile_shared_replacement_test $count
+}
+
+trap cleanup EXIT
+
+setup_prepare
+setup_wait
+
+tests_run
+
+exit $EXIT_STATUS
diff --git a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
index 1075d70e8f25..04f03ae9d8fb 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/rtnetlink.sh
@@ -10,9 +10,7 @@
 lib_dir=$(dirname $0)/../../../net/forwarding
 
 ALL_TESTS="
-	rif_set_addr_test
 	rif_vrf_set_addr_test
-	rif_inherit_bridge_addr_test
 	rif_non_inherit_bridge_addr_test
 	vlan_interface_deletion_test
 	bridge_deletion_test
@@ -60,55 +58,6 @@ cleanup()
 	ip link set dev $swp1 down
 }
 
-rif_set_addr_test()
-{
-	local swp1_mac=$(mac_get $swp1)
-	local swp2_mac=$(mac_get $swp2)
-
-	RET=0
-
-	# $swp1 and $swp2 likely got their IPv6 local addresses already, but
-	# here we need to test the transition to RIF.
-	ip addr flush dev $swp1
-	ip addr flush dev $swp2
-	sleep .1
-
-	ip addr add dev $swp1 192.0.2.1/28
-	check_err $?
-
-	ip link set dev $swp1 addr 00:11:22:33:44:55
-	check_err $?
-
-	# IP address enablement should be rejected if the MAC address prefix
-	# doesn't match other RIFs.
-	ip addr add dev $swp2 192.0.2.2/28 &>/dev/null
-	check_fail $? "IP address addition passed for a device with a wrong MAC"
-	ip addr add dev $swp2 192.0.2.2/28 2>&1 >/dev/null \
-	    | grep -q mlxsw_spectrum
-	check_err $? "no extack for IP address addition"
-
-	ip link set dev $swp2 addr 00:11:22:33:44:66
-	check_err $?
-	ip addr add dev $swp2 192.0.2.2/28 &>/dev/null
-	check_err $?
-
-	# Change of MAC address of a RIF should be forbidden if the new MAC
-	# doesn't share the prefix with other MAC addresses.
-	ip link set dev $swp2 addr 00:11:22:33:00:66 &>/dev/null
-	check_fail $? "change of MAC address passed for a wrong MAC"
-	ip link set dev $swp2 addr 00:11:22:33:00:66 2>&1 >/dev/null \
-	    | grep -q mlxsw_spectrum
-	check_err $? "no extack for MAC address change"
-
-	log_test "RIF - bad MAC change"
-
-	ip addr del dev $swp2 192.0.2.2/28
-	ip addr del dev $swp1 192.0.2.1/28
-
-	ip link set dev $swp2 addr $swp2_mac
-	ip link set dev $swp1 addr $swp1_mac
-}
-
 rif_vrf_set_addr_test()
 {
 	# Test that it is possible to set an IP address on a VRF upper despite
@@ -128,45 +77,6 @@ rif_vrf_set_addr_test()
 	ip link del dev vrf-test
 }
 
-rif_inherit_bridge_addr_test()
-{
-	RET=0
-
-	# Create first RIF
-	ip addr add dev $swp1 192.0.2.1/28
-	check_err $?
-
-	# Create a FID RIF
-	ip link add name br1 up type bridge vlan_filtering 0
-	ip link set dev $swp2 master br1
-	ip addr add dev br1 192.0.2.17/28
-	check_err $?
-
-	# Prepare a device with a low MAC address
-	ip link add name d up type dummy
-	ip link set dev d addr 00:11:22:33:44:55
-
-	# Attach the device to br1. That prompts bridge address change, which
-	# should be vetoed, thus preventing the attachment.
-	ip link set dev d master br1 &>/dev/null
-	check_fail $? "Device with low MAC was permitted to attach a bridge with RIF"
-	ip link set dev d master br1 2>&1 >/dev/null \
-	    | grep -q mlxsw_spectrum
-	check_err $? "no extack for bridge attach rejection"
-
-	ip link set dev $swp2 addr 00:11:22:33:44:55 &>/dev/null
-	check_fail $? "Changing swp2's MAC address permitted"
-	ip link set dev $swp2 addr 00:11:22:33:44:55 2>&1 >/dev/null \
-	    | grep -q mlxsw_spectrum
-	check_err $? "no extack for bridge port MAC address change rejection"
-
-	log_test "RIF - attach port with bad MAC to bridge"
-
-	ip link del dev d
-	ip link del dev br1
-	ip addr del dev $swp1 192.0.2.1/28
-}
-
 rif_non_inherit_bridge_addr_test()
 {
 	local swp2_mac=$(mac_get $swp2)
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
index 02b7eea19743..e9f65bd2e299 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/resource_scale.sh
@@ -25,7 +25,7 @@ cleanup()
 
 trap cleanup EXIT
 
-ALL_TESTS="router tc_flower mirror_gre tc_police port"
+ALL_TESTS="router tc_flower mirror_gre tc_police port rif_mac_profile"
 for current_test in ${TESTS:-$ALL_TESTS}; do
 	RET_FIN=0
 	source ${current_test}_scale.sh
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh
new file mode 100644
index 000000000000..303d7cbe3c45
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/rif_mac_profile_scale.sh
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../rif_mac_profile_scale.sh
+
+rif_mac_profile_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get rif_mac_profiles)
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
index 685dfb3478b3..bcb110e830ce 100755
--- a/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/resource_scale.sh
@@ -22,7 +22,7 @@ cleanup()
 devlink_sp_read_kvd_defaults
 trap cleanup EXIT
 
-ALL_TESTS="router tc_flower mirror_gre tc_police port"
+ALL_TESTS="router tc_flower mirror_gre tc_police port rif_mac_profile"
 for current_test in ${TESTS:-$ALL_TESTS}; do
 	RET_FIN=0
 	source ${current_test}_scale.sh
diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_mac_profile_scale.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_mac_profile_scale.sh
new file mode 100644
index 000000000000..303d7cbe3c45
--- /dev/null
+++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum/rif_mac_profile_scale.sh
@@ -0,0 +1,16 @@
+# SPDX-License-Identifier: GPL-2.0
+source ../rif_mac_profile_scale.sh
+
+rif_mac_profile_get_target()
+{
+	local should_fail=$1
+	local target
+
+	target=$(devlink_resource_size_get rif_mac_profiles)
+
+	if ((! should_fail)); then
+		echo $target
+	else
+		echo $((target + 1))
+	fi
+}