diff options
| -rw-r--r-- | Documentation/devicetree/bindings/net/stmmac.txt | 58 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/common.h | 22 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c | 6 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c | 3 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac4.h | 59 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c | 302 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 8 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_main.c | 142 | ||||
| -rw-r--r-- | drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 114 | ||||
| -rw-r--r-- | include/linux/stmmac.h | 36 |
10 files changed, 647 insertions, 103 deletions
diff --git a/Documentation/devicetree/bindings/net/stmmac.txt b/Documentation/devicetree/bindings/net/stmmac.txt index 11b27dfd1627..a7b0e41cb264 100644 --- a/Documentation/devicetree/bindings/net/stmmac.txt +++ b/Documentation/devicetree/bindings/net/stmmac.txt @@ -72,7 +72,35 @@ Optional properties: - snps,mb: mixed-burst - snps,rb: rebuild INCRx Burst - mdio: with compatible = "snps,dwmac-mdio", create and register mdio bus. - +- Multiple RX Queues parameters: below the list of all the parameters to + configure the multiple RX queues: + - snps,rx-queues-to-use: number of RX queues to be used in the driver + - Choose one of these RX scheduling algorithms: + - snps,rx-sched-sp: Strict priority + - snps,rx-sched-wsp: Weighted Strict priority + - For each RX queue + - Choose one of these modes: + - snps,dcb-algorithm: Queue to be enabled as DCB + - snps,avb-algorithm: Queue to be enabled as AVB + - snps,map-to-dma-channel: Channel to map +- Multiple TX Queues parameters: below the list of all the parameters to + configure the multiple TX queues: + - snps,tx-queues-to-use: number of TX queues to be used in the driver + - Choose one of these TX scheduling algorithms: + - snps,tx-sched-wrr: Weighted Round Robin + - snps,tx-sched-wfq: Weighted Fair Queuing + - snps,tx-sched-dwrr: Deficit Weighted Round Robin + - snps,tx-sched-sp: Strict priority + - For each TX queue + - snps,weight: TX queue weight (if using a DCB weight algorithm) + - Choose one of these modes: + - snps,dcb-algorithm: TX queue will be working in DCB + - snps,avb-algorithm: TX queue will be working in AVB + - Configure Credit Base Shaper (if AVB Mode selected): + - snps,send_slope: enable Low Power Interface + - snps,idle_slope: unlock on WoL + - snps,high_credit: max write outstanding req. limit + - snps,low_credit: max read outstanding req. limit Examples: stmmac_axi_setup: stmmac-axi-config { @@ -81,6 +109,32 @@ Examples: snps,blen = <256 128 64 32 0 0 0>; }; + mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + snps,rx-sched-sp; + queue0 { + snps,dcb-algorithm; + snps,map-to-dma-channel = <0x0>; + }; + }; + + mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <2>; + snps,tx-sched-wrr; + queue0 { + snps,weight = <0x10>; + snps,dcb-algorithm; + }; + + queue1 { + snps,avb-algorithm; + snps,send_slope = <0x1000>; + snps,idle_slope = <0x1000>; + snps,high_credit = <0x3E800>; + snps,low_credit = <0xFFC18000>; + }; + }; + gmac0: ethernet@e0800000 { compatible = "st,spear600-gmac"; reg = <0xe0800000 0x8000>; @@ -104,4 +158,6 @@ Examples: phy1: ethernet-phy@0 { }; }; + snps,mtl-rx-config = <&mtl_rx_setup>; + snps,mtl-tx-config = <&mtl_tx_setup>; }; diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index 3ca36744007b..9f0d26da6813 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -457,17 +457,32 @@ struct stmmac_ops { /* Enable and verify that the IPC module is supported */ int (*rx_ipc)(struct mac_device_info *hw); /* Enable RX Queues */ - void (*rx_queue_enable)(struct mac_device_info *hw, u32 queue); + void (*rx_queue_enable)(struct mac_device_info *hw, u8 mode, u32 queue); + /* Program RX Algorithms */ + void (*prog_mtl_rx_algorithms)(struct mac_device_info *hw, u32 rx_alg); + /* Program TX Algorithms */ + void (*prog_mtl_tx_algorithms)(struct mac_device_info *hw, u32 tx_alg); + /* Set MTL TX queues weight */ + void (*set_mtl_tx_queue_weight)(struct mac_device_info *hw, + u32 weight, u32 queue); + /* RX MTL queue to RX dma mapping */ + void (*map_mtl_to_dma)(struct mac_device_info *hw, u32 queue, u32 chan); + /* Configure AV Algorithm */ + void (*config_cbs)(struct mac_device_info *hw, u32 send_slope, + u32 idle_slope, u32 high_credit, u32 low_credit, + u32 queue); /* Dump MAC registers */ void (*dump_regs)(struct mac_device_info *hw, u32 *reg_space); /* Handle extra events on specific interrupts hw dependent */ int (*host_irq_status)(struct mac_device_info *hw, struct stmmac_extra_stats *x); + /* Handle MTL interrupts */ + int (*host_mtl_irq_status)(struct mac_device_info *hw, u32 chan); /* Multicast filter setting */ void (*set_filter)(struct mac_device_info *hw, struct net_device *dev); /* Flow control setting */ void (*flow_ctrl)(struct mac_device_info *hw, unsigned int duplex, - unsigned int fc, unsigned int pause_time); + unsigned int fc, unsigned int pause_time, u32 tx_cnt); /* Set power management mode (e.g. magic frame) */ void (*pmt)(struct mac_device_info *hw, unsigned long mode); /* Set/Get Unicast MAC addresses */ @@ -480,7 +495,8 @@ struct stmmac_ops { void (*reset_eee_mode)(struct mac_device_info *hw); void (*set_eee_timer)(struct mac_device_info *hw, int ls, int tw); void (*set_eee_pls)(struct mac_device_info *hw, int link); - void (*debug)(void __iomem *ioaddr, struct stmmac_extra_stats *x); + void (*debug)(void __iomem *ioaddr, struct stmmac_extra_stats *x, + u32 rx_queues, u32 tx_queues); /* PCS calls */ void (*pcs_ctrl_ane)(void __iomem *ioaddr, bool ane, bool srgmi_ral, bool loopback); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c index 19b9b3087099..7f78f7746a5b 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac1000_core.c @@ -216,7 +216,8 @@ static void dwmac1000_set_filter(struct mac_device_info *hw, static void dwmac1000_flow_ctrl(struct mac_device_info *hw, unsigned int duplex, - unsigned int fc, unsigned int pause_time) + unsigned int fc, unsigned int pause_time, + u32 tx_cnt) { void __iomem *ioaddr = hw->pcsr; /* Set flow such that DZPQ in Mac Register 6 is 0, @@ -412,7 +413,8 @@ static void dwmac1000_get_adv_lp(void __iomem *ioaddr, struct rgmii_adv *adv) dwmac_get_adv_lp(ioaddr, GMAC_PCS_BASE, adv); } -static void dwmac1000_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x) +static void dwmac1000_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x, + u32 rx_queues, u32 tx_queues) { u32 value = readl(ioaddr + GMAC_DEBUG); diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c index e370ccec6176..524135e6dd89 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac100_core.c @@ -131,7 +131,8 @@ static void dwmac100_set_filter(struct mac_device_info *hw, } static void dwmac100_flow_ctrl(struct mac_device_info *hw, unsigned int duplex, - unsigned int fc, unsigned int pause_time) + unsigned int fc, unsigned int pause_time, + u32 tx_cnt) { void __iomem *ioaddr = hw->pcsr; unsigned int flow = MAC_FLOW_CTRL_ENABLE; diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h index 018fc2d447c4..54bcdb4d10db 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4.h +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4.h @@ -164,8 +164,25 @@ enum power_event { #define GMAC_HI_REG_AE BIT(31) /* MTL registers */ +#define MTL_OPERATION_MODE 0x00000c00 +#define MTL_OPERATION_SCHALG_MASK GENMASK(6, 5) +#define MTL_OPERATION_SCHALG_WRR (0x0 << 5) +#define MTL_OPERATION_SCHALG_WFQ (0x1 << 5) +#define MTL_OPERATION_SCHALG_DWRR (0x2 << 5) +#define MTL_OPERATION_SCHALG_SP (0x3 << 5) +#define MTL_OPERATION_RAA BIT(2) +#define MTL_OPERATION_RAA_SP (0x0 << 2) +#define MTL_OPERATION_RAA_WSP (0x1 << 2) + #define MTL_INT_STATUS 0x00000c20 -#define MTL_INT_Q0 BIT(0) +#define MTL_INT_QX(x) BIT(x) + +#define MTL_RXQ_DMA_MAP0 0x00000c30 /* queue 0 to 3 */ +#define MTL_RXQ_DMA_MAP1 0x00000c34 /* queue 4 to 7 */ +#define MTL_RXQ_DMA_Q04MDMACH_MASK GENMASK(3, 0) +#define MTL_RXQ_DMA_Q04MDMACH(x) ((x) << 0) +#define MTL_RXQ_DMA_QXMDMACH_MASK(x) GENMASK(11 + (8 * ((x) - 1)), 8 * (x)) +#define MTL_RXQ_DMA_QXMDMACH(chan, q) ((chan) << (8 * (q))) #define MTL_CHAN_BASE_ADDR 0x00000d00 #define MTL_CHAN_BASE_OFFSET 0x40 @@ -216,6 +233,46 @@ enum power_event { #define MTL_OP_MODE_RTC_96 (2 << MTL_OP_MODE_RTC_SHIFT) #define MTL_OP_MODE_RTC_128 (3 << MTL_OP_MODE_RTC_SHIFT) +/* MTL ETS Control register */ +#define MTL_ETS_CTRL_BASE_ADDR 0x00000d10 +#define MTL_ETS_CTRL_BASE_OFFSET 0x40 +#define MTL_ETSX_CTRL_BASE_ADDR(x) (MTL_ETS_CTRL_BASE_ADDR + \ + ((x) * MTL_ETS_CTRL_BASE_OFFSET)) + +#define MTL_ETS_CTRL_CC BIT(3) +#define MTL_ETS_CTRL_AVALG BIT(2) + +/* MTL Queue Quantum Weight */ +#define MTL_TXQ_WEIGHT_BASE_ADDR 0x00000d18 +#define MTL_TXQ_WEIGHT_BASE_OFFSET 0x40 +#define MTL_TXQX_WEIGHT_BASE_ADDR(x) (MTL_TXQ_WEIGHT_BASE_ADDR + \ + ((x) * MTL_TXQ_WEIGHT_BASE_OFFSET)) +#define MTL_TXQ_WEIGHT_ISCQW_MASK GENMASK(20, 0) + +/* MTL sendSlopeCredit register */ +#define MTL_SEND_SLP_CRED_BASE_ADDR 0x00000d1c +#define MTL_SEND_SLP_CRED_OFFSET 0x40 +#define MTL_SEND_SLP_CREDX_BASE_ADDR(x) (MTL_SEND_SLP_CRED_BASE_ADDR + \ + ((x) * MTL_SEND_SLP_CRED_OFFSET)) + +#define MTL_SEND_SLP_CRED_SSC_MASK GENMASK(13, 0) + +/* MTL hiCredit register */ +#define MTL_HIGH_CRED_BASE_ADDR 0x00000d20 +#define MTL_HIGH_CRED_OFFSET 0x40 +#define MTL_HIGH_CREDX_BASE_ADDR(x) (MTL_HIGH_CRED_BASE_ADDR + \ + ((x) * MTL_HIGH_CRED_OFFSET)) + +#define MTL_HIGH_CRED_HC_MASK GENMASK(28, 0) + +/* MTL loCredit register */ +#define MTL_LOW_CRED_BASE_ADDR 0x00000d24 +#define MTL_LOW_CRED_OFFSET 0x40 +#define MTL_LOW_CREDX_BASE_ADDR(x) (MTL_LOW_CRED_BASE_ADDR + \ + ((x) * MTL_LOW_CRED_OFFSET)) + +#define MTL_HIGH_CRED_LC_MASK GENMASK(28, 0) + /* MTL debug */ #define MTL_DEBUG_TXSTSFSTS BIT(5) #define MTL_DEBUG_TXFSTS BIT(4) diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c index 1e79e6529c4a..10599dbc232f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac4_core.c @@ -59,17 +59,143 @@ static void dwmac4_core_init(struct mac_device_info *hw, int mtu) writel(value, ioaddr + GMAC_INT_EN); } -static void dwmac4_rx_queue_enable(struct mac_device_info *hw, u32 queue) +static void dwmac4_rx_queue_enable(struct mac_device_info *hw, + u8 mode, u32 queue) { void __iomem *ioaddr = hw->pcsr; u32 value = readl(ioaddr + GMAC_RXQ_CTRL0); value &= GMAC_RX_QUEUE_CLEAR(queue); - value |= GMAC_RX_AV_QUEUE_ENABLE(queue); + if (mode == MTL_QUEUE_AVB) + value |= GMAC_RX_AV_QUEUE_ENABLE(queue); + else if (mode == MTL_QUEUE_DCB) + value |= GMAC_RX_DCB_QUEUE_ENABLE(queue); writel(value, ioaddr + GMAC_RXQ_CTRL0); } +static void dwmac4_prog_mtl_rx_algorithms(struct mac_device_info *hw, + u32 rx_alg) +{ + void __iomem *ioaddr = hw->pcsr; + u32 value = readl(ioaddr + MTL_OPERATION_MODE); + + value &= ~MTL_OPERATION_RAA; + switch (rx_alg) { + case MTL_RX_ALGORITHM_SP: + value |= MTL_OPERATION_RAA_SP; + break; + case MTL_RX_ALGORITHM_WSP: + value |= MTL_OPERATION_RAA_WSP; + break; + default: + break; + } + + writel(value, ioaddr + MTL_OPERATION_MODE); +} + +static void dwmac4_prog_mtl_tx_algorithms(struct mac_device_info *hw, + u32 tx_alg) +{ + void __iomem *ioaddr = hw->pcsr; + u32 value = readl(ioaddr + MTL_OPERATION_MODE); + + value &= ~MTL_OPERATION_SCHALG_MASK; + switch (tx_alg) { + case MTL_TX_ALGORITHM_WRR: + value |= MTL_OPERATION_SCHALG_WRR; + break; + case MTL_TX_ALGORITHM_WFQ: + value |= MTL_OPERATION_SCHALG_WFQ; + break; + case MTL_TX_ALGORITHM_DWRR: + value |= MTL_OPERATION_SCHALG_DWRR; + break; + case MTL_TX_ALGORITHM_SP: + value |= MTL_OPERATION_SCHALG_SP; + break; + default: + break; + } +} + +static void dwmac4_set_mtl_tx_queue_weight(struct mac_device_info *hw, + u32 weight, u32 queue) +{ + void __iomem *ioaddr = hw->pcsr; + u32 value = readl(ioaddr + MTL_TXQX_WEIGHT_BASE_ADDR(queue)); + + value &= ~MTL_TXQ_WEIGHT_ISCQW_MASK; + value |= weight & MTL_TXQ_WEIGHT_ISCQW_MASK; + writel(value, ioaddr + MTL_TXQX_WEIGHT_BASE_ADDR(queue)); +} + +static void dwmac4_map_mtl_dma(struct mac_device_info *hw, u32 queue, u32 chan) +{ + void __iomem *ioaddr = hw->pcsr; + u32 value; + + if (queue < 4) + value = readl(ioaddr + MTL_RXQ_DMA_MAP0); + else + value = readl(ioaddr + MTL_RXQ_DMA_MAP1); + + if (queue == 0 || queue == 4) { + value &= ~MTL_RXQ_DMA_Q04MDMACH_MASK; + value |= MTL_RXQ_DMA_Q04MDMACH(chan); + } else { + value &= ~MTL_RXQ_DMA_QXMDMACH_MASK(queue); + value |= MTL_RXQ_DMA_QXMDMACH(chan, queue); + } + + if (queue < 4) + writel(value, ioaddr + MTL_RXQ_DMA_MAP0); + else + writel(value, ioaddr + MTL_RXQ_DMA_MAP1); +} + +static void dwmac4_config_cbs(struct mac_device_info *hw, + u32 send_slope, u32 idle_slope, + u32 high_credit, u32 low_credit, u32 queue) +{ + void __iomem *ioaddr = hw->pcsr; + u32 value; + + pr_debug("Queue %d configured as AVB. Parameters:\n", queue); + pr_debug("\tsend_slope: 0x%08x\n", send_slope); + pr_debug("\tidle_slope: 0x%08x\n", idle_slope); + pr_debug("\thigh_credit: 0x%08x\n", high_credit); + pr_debug("\tlow_credit: 0x%08x\n", low_credit); + + /* enable AV algorithm */ + value = readl(ioaddr + MTL_ETSX_CTRL_BASE_ADDR(queue)); + value |= MTL_ETS_CTRL_AVALG; + value |= MTL_ETS_CTRL_CC; + writel(value, ioaddr + MTL_ETSX_CTRL_BASE_ADDR(queue)); + + /* configure send slope */ + value = readl(ioaddr + MTL_SEND_SLP_CREDX_BASE_ADDR(queue)); + value &= ~MTL_SEND_SLP_CRED_SSC_MASK; + value |= send_slope & MTL_SEND_SLP_CRED_SSC_MASK; + writel(value, ioaddr + MTL_SEND_SLP_CREDX_BASE_ADDR(queue)); + + /* configure idle slope (same register as tx weight) */ + dwmac4_set_mtl_tx_queue_weight(hw, idle_slope, queue); + + /* configure high credit */ + value = readl(ioaddr + MTL_HIGH_CREDX_BASE_ADDR(queue)); + value &= ~MTL_HIGH_CRED_HC_MASK; + value |= high_credit & MTL_HIGH_CRED_HC_MASK; + writel(value, ioaddr + MTL_HIGH_CREDX_BASE_ADDR(queue)); + + /* configure high credit */ + value = readl(ioaddr + MTL_LOW_CREDX_BASE_ADDR(queue)); + value &= ~MTL_HIGH_CRED_LC_MASK; + value |= low_credit & MTL_HIGH_CRED_LC_MASK; + writel(value, ioaddr + MTL_LOW_CREDX_BASE_ADDR(queue)); +} + static void dwmac4_dump_regs(struct mac_device_info *hw, u32 *reg_space) { void __iomem *ioaddr = hw->pcsr; @@ -251,11 +377,12 @@ static void dwmac4_set_filter(struct mac_device_info *hw, } static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex, - unsigned int fc, unsigned int pause_time) + unsigned int fc, unsigned int pause_time, + u32 tx_cnt) { void __iomem *ioaddr = hw->pcsr; - u32 channel = STMMAC_CHAN0; /* FIXME */ unsigned int flow = 0; + u32 queue = 0; pr_debug("GMAC Flow-Control:\n"); if (fc & FLOW_RX) { @@ -265,13 +392,18 @@ static void dwmac4_flow_ctrl(struct mac_device_info *hw, unsigned int duplex, } if (fc & FLOW_TX) { pr_debug("\tTransmit Flow-Control ON\n"); - flow |= GMAC_TX_FLOW_CTRL_TFE; - writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(channel)); - if (duplex) { + if (duplex) pr_debug("\tduplex mode: PAUSE %d\n", pause_time); - flow |= (pause_time << GMAC_TX_FLOW_CTRL_PT_SHIFT); - writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(channel)); + + for (queue = 0; queue < tx_cnt; queue++) { + flow |= GMAC_TX_FLOW_CTRL_TFE; + + if (duplex) + flow |= + (pause_time << GMAC_TX_FLOW_CTRL_PT_SHIFT); + + writel(flow, ioaddr + GMAC_QX_TX_FLOW_CTRL(queue)); } } } @@ -325,11 +457,34 @@ static void dwmac4_phystatus(void __iomem *ioaddr, struct stmmac_extra_stats *x) } } +static int dwmac4_irq_mtl_status(struct mac_device_info *hw, u32 chan) +{ + void __iomem *ioaddr = hw->pcsr; + u32 mtl_int_qx_status; + int ret = 0; + + mtl_int_qx_status = readl(ioaddr + MTL_INT_STATUS); + + /* Check MTL Interrupt */ + if (mtl_int_qx_status & MTL_INT_QX(chan)) { + /* read Queue x Interrupt status */ + u32 status = readl(ioaddr + MTL_CHAN_INT_CTRL(chan)); + + if (status & MTL_RX_OVERFLOW_INT) { + /* clear Interrupt */ + writel(status | MTL_RX_OVERFLOW_INT, + ioaddr + MTL_CHAN_INT_CTRL(chan)); + ret = CORE_IRQ_MTL_RX_OVERFLOW; + } + } + + return ret; +} + static int dwmac4_irq_status(struct mac_device_info *hw, struct stmmac_extra_stats *x) { void __iomem *ioaddr = hw->pcsr; - u32 mtl_int_qx_status; u32 intr_status; int ret = 0; @@ -348,20 +503,6 @@ static int dwmac4_irq_status(struct mac_device_info *hw, x->irq_receive_pmt_irq_n++; } - mtl_int_qx_status = readl(ioaddr + MTL_INT_STATUS); - /* Check MTL Interrupt: Currently only one queue is used: Q0. */ - if (mtl_int_qx_status & MTL_INT_Q0) { - /* read Queue 0 Interrupt status */ - u32 status = readl(ioaddr + MTL_CHAN_INT_CTRL(STMMAC_CHAN0)); - - if (status & MTL_RX_OVERFLOW_INT) { - /* clear Interrupt */ - writel(status | MTL_RX_OVERFLOW_INT, - ioaddr + MTL_CHAN_INT_CTRL(STMMAC_CHAN0)); - ret = CORE_IRQ_MTL_RX_OVERFLOW; - } - } - dwmac_pcs_isr(ioaddr, GMAC_PCS_BASE, intr_status, x); if (intr_status & PCS_RGSMIIIS_IRQ) dwmac4_phystatus(ioaddr, x); @@ -369,64 +510,69 @@ static int dwmac4_irq_status(struct mac_device_info *hw, return ret; } -static void dwmac4_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x) +static void dwmac4_debug(void __iomem *ioaddr, struct stmmac_extra_stats *x, + u32 rx_queues, u32 tx_queues) { u32 value; - - /* Currently only channel 0 is supported */ - value = readl(ioaddr + MTL_CHAN_TX_DEBUG(STMMAC_CHAN0)); - - if (value & MTL_DEBUG_TXSTSFSTS) - x->mtl_tx_status_fifo_full++; - if (value & MTL_DEBUG_TXFSTS) - x->mtl_tx_fifo_not_empty++; - if (value & MTL_DEBUG_TWCSTS) - x->mmtl_fifo_ctrl++; - if (value & MTL_DEBUG_TRCSTS_MASK) { - u32 trcsts = (value & MTL_DEBUG_TRCSTS_MASK) - >> MTL_DEBUG_TRCSTS_SHIFT; - if (trcsts == MTL_DEBUG_TRCSTS_WRITE) - x->mtl_tx_fifo_read_ctrl_write++; - else if (trcsts == MTL_DEBUG_TRCSTS_TXW) - x->mtl_tx_fifo_read_ctrl_wait++; - else if (trcsts == MTL_DEBUG_TRCSTS_READ) - x->mtl_tx_fifo_read_ctrl_read++; - else - x->mtl_tx_fifo_read_ctrl_idle++; + u32 queue; + + for (queue = 0; queue < tx_queues; queue++) { + value = readl(ioaddr + MTL_CHAN_TX_DEBUG(queue)); + + if (value & MTL_DEBUG_TXSTSFSTS) + x->mtl_tx_status_fifo_full++; + if (value & MTL_DEBUG_TXFSTS) + x->mtl_tx_fifo_not_empty++; + if (value & MTL_DEBUG_TWCSTS) + x->mmtl_fifo_ctrl++; + if (value & MTL_DEBUG_TRCSTS_MASK) { + u32 trcsts = (value & MTL_DEBUG_TRCSTS_MASK) + >> MTL_DEBUG_TRCSTS_SHIFT; + if (trcsts == MTL_DEBUG_TRCSTS_WRITE) + x->mtl_tx_fifo_read_ctrl_write++; + else if (trcsts == MTL_DEBUG_TRCSTS_TXW) + x->mtl_tx_fifo_read_ctrl_wait++; + else if (trcsts == MTL_DEBUG_TRCSTS_READ) + x->mtl_tx_fifo_read_ctrl_read++; + else + x->mtl_tx_fifo_read_ctrl_idle++; + } + if (value & MTL_DEBUG_TXPAUSED) + x->mac_tx_in_pause++; } - if (value & MTL_DEBUG_TXPAUSED) - x->mac_tx_in_pause++; - value = readl(ioaddr + MTL_CHAN_RX_DEBUG(STMMAC_CHAN0)); + for (queue = 0; queue < rx_queues; queue++) { + value = readl(ioaddr + MTL_CHAN_RX_DEBUG(queue)); - if (value & MTL_DEBUG_RXFSTS_MASK) { - u32 rxfsts = (value & MTL_DEBUG_RXFSTS_MASK) - >> MTL_DEBUG_RRCSTS_SHIFT; + if (value & MTL_DEBUG_RXFSTS_MASK) { + u32 rxfsts = (value & MTL_DEBUG_RXFSTS_MASK) + >> MTL_DEBUG_RRCSTS_SHIFT; - if (rxfsts == MTL_DEBUG_RXFSTS_FULL) - x->mtl_rx_fifo_fill_level_full++; - else if (rxfsts == MTL_DEBUG_RXFSTS_AT) - x->mtl_rx_fifo_fill_above_thresh++; - else if (rxfsts == MTL_DEBUG_RXFSTS_BT) - x->mtl_rx_fifo_fill_below_thresh++; - else - x->mtl_rx_fifo_fill_level_empty++; - } - if (value & MTL_DEBUG_RRCSTS_MASK) { - u32 rrcsts = (value & MTL_DEBUG_RRCSTS_MASK) >> - MTL_DEBUG_RRCSTS_SHIFT; - - if (rrcsts == MTL_DEBUG_RRCSTS_FLUSH) - x->mtl_rx_fifo_read_ctrl_flush++; - else if (rrcsts == MTL_DEBUG_RRCSTS_RSTAT) - x->mtl_rx_fifo_read_ctrl_read_data++; - else if (rrcsts == MTL_DEBUG_RRCSTS_RDATA) - x->mtl_rx_fifo_read_ctrl_status++; - else - x->mtl_rx_fifo_read_ctrl_idle++; + if (rxfsts == MTL_DEBUG_RXFSTS_FULL) + x->mtl_rx_fifo_fill_level_full++; + else if (rxfsts == MTL_DEBUG_RXFSTS_AT) + x->mtl_rx_fifo_fill_above_thresh++; + else if (rxfsts == MTL_DEBUG_RXFSTS_BT) + x->mtl_rx_fifo_fill_below_thresh++; + else + x->mtl_rx_fifo_fill_level_empty++; + } + if (value & MTL_DEBUG_RRCSTS_MASK) { + u32 rrcsts = (value & MTL_DEBUG_RRCSTS_MASK) >> + MTL_DEBUG_RRCSTS_SHIFT; + + if (rrcsts == MTL_DEBUG_RRCSTS_FLUSH) + x->mtl_rx_fifo_read_ctrl_flush++; + else if (rrcsts == MTL_DEBUG_RRCSTS_RSTAT) + x->mtl_rx_fifo_read_ctrl_read_data++; + else if (rrcsts == MTL_DEBUG_RRCSTS_RDATA) + x->mtl_rx_fifo_read_ctrl_status++; + else + x->mtl_rx_fifo_read_ctrl_idle++; + } + if (value & MTL_DEBUG_RWCSTS) + x->mtl_rx_fifo_ctrl_active++; } - if (value & MTL_DEBUG_RWCSTS) - x->mtl_rx_fifo_ctrl_active++; /* GMAC debug */ value = readl(ioaddr + GMAC_DEBUG); @@ -457,8 +603,14 @@ static const struct stmmac_ops dwmac4_ops = { .core_init = dwmac4_core_init, .rx_ipc = dwmac4_rx_ipc_enable, .rx_queue_enable = dwmac4_rx_queue_enable, + .prog_mtl_rx_algorithms = dwmac4_prog_mtl_rx_algorithms, + .prog_mtl_tx_algorithms = dwmac4_prog_mtl_tx_algorithms, + .set_mtl_tx_queue_weight = dwmac4_set_mtl_tx_queue_weight, + .map_mtl_to_dma = dwmac4_map_mtl_dma, + .config_cbs = dwmac4_config_cbs, .dump_regs = dwmac4_dump_regs, .host_irq_status = dwmac4_irq_status, + .host_mtl_irq_status = dwmac4_irq_mtl_status, .flow_ctrl = dwmac4_flow_ctrl, .pmt = dwmac4_pmt, .set_umac_addr = dwmac4_set_umac_addr, diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index 85d64114e159..61b9369a041e 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -481,6 +481,7 @@ stmmac_set_pauseparam(struct net_device *netdev, struct ethtool_pauseparam *pause) { struct stmmac_priv *priv = netdev_priv(netdev); + u32 tx_cnt = priv->plat->tx_queues_to_use; struct phy_device *phy = netdev->phydev; int new_pause = FLOW_OFF; @@ -511,7 +512,7 @@ stmmac_set_pauseparam(struct net_device *netdev, } priv->hw->mac->flow_ctrl(priv->hw, phy->duplex, priv->flow_ctrl, - priv->pause); + priv->pause, tx_cnt); return 0; } @@ -519,6 +520,8 @@ static void stmmac_get_ethtool_stats(struct net_device *dev, struct ethtool_stats *dummy, u64 *data) { struct stmmac_priv *priv = netdev_priv(dev); + u32 rx_queues_count = priv->plat->rx_queues_to_use; + u32 tx_queues_count = priv->plat->tx_queues_to_use; int i, j = 0; /* Update the DMA HW counters for dwmac10/100 */ @@ -549,7 +552,8 @@ static void stmmac_get_ethtool_stats(struct net_device *dev, if ((priv->hw->mac->debug) && (priv->synopsys_id >= DWMAC_CORE_3_50)) priv->hw->mac->debug(priv->ioaddr, - (void *)&priv->xstats); + (void *)&priv->xstats, + rx_queues_count, tx_queues_count); } for (i = 0; i < STMMAC_STATS_LEN; i++) { char *p = (char *)priv + stmmac_gstrings_stats[i].stat_offset; diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c index 78f6ec2d165b..915636ff2fc1 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_main.c @@ -673,6 +673,19 @@ static void stmmac_release_ptp(struct stmmac_priv *priv) } /** + * stmmac_mac_flow_ctrl - Configure flow control in all queues + * @priv: driver private structure + * Description: It is used for configuring the flow control in all queues + */ +static void stmmac_mac_flow_ctrl(struct stmmac_priv *priv, u32 duplex) +{ + u32 tx_cnt = priv->plat->tx_queues_to_use; + + priv->hw->mac->flow_ctrl(priv->hw, duplex, priv->flow_ctrl, + priv->pause, tx_cnt); +} + +/** * stmmac_adjust_link - adjusts the link parameters * @dev: net device structure * Description: this is the helper called by the physical abstraction layer @@ -687,7 +700,6 @@ static void stmmac_adjust_link(struct net_device *dev) struct phy_device *phydev = dev->phydev; unsigned long flags; int new_state = 0; - unsigned int fc = priv->flow_ctrl, pause_time = priv->pause; if (!phydev) return; @@ -709,8 +721,7 @@ static void stmmac_adjust_link(struct net_device *dev) } /* Flow Control operation */ if (phydev->pause) - priv->hw->mac->flow_ctrl(priv->hw, phydev->duplex, - fc, pause_time); + stmmac_mac_flow_ctrl(priv, phydev->duplex); if (phydev->speed != priv->speed) { new_state = 1; @@ -1256,19 +1267,14 @@ static void free_dma_desc_resources(struct stmmac_priv *priv) */ static void stmmac_mac_enable_rx_queues(struct stmmac_priv *priv) { - int rx_count = priv->dma_cap.number_rx_queues; - int queue = 0; + u32 rx_queues_count = priv->plat->rx_queues_to_use; + int queue; + u8 mode; - /* If GMAC does not have multiple queues, then this is not necessary*/ - if (rx_count == 1) - return; - - /** - * If the core is synthesized with multiple rx queues / multiple - * dma channels, then rx queues will be disabled by default. - * For now only rx queue 0 is enabled. - */ - priv->hw->mac->rx_queue_enable(priv->hw, queue); + for (queue = 0; queue < rx_queues_count; queue++) { + mode = priv->plat->rx_queues_cfg[queue].mode_to_use; + priv->hw->mac->rx_queue_enable(priv->hw, mode, queue); + } } /** @@ -1648,6 +1654,101 @@ static void stmmac_init_tx_coalesce(struct stmmac_priv *priv) } /** + * stmmac_set_tx_queue_weight - Set TX queue weight + * @priv: driver private structure + * Description: It is used for setting TX queues weight + */ +static void stmmac_set_tx_queue_weight(struct stmmac_priv *priv) +{ + u32 tx_queues_count = priv->plat->tx_queues_to_use; + u32 weight; + u32 queue; + + for (queue = 0; queue < tx_queues_count; queue++) { + weight = priv->plat->tx_queues_cfg[queue].weight; + priv->hw->mac->set_mtl_tx_queue_weight(priv->hw, weight, queue); + } +} + +/** + * stmmac_configure_cbs - Configure CBS in TX queue + * @priv: driver private structure + * Description: It is used for configuring CBS in AVB TX queues + */ +static void stmmac_configure_cbs(struct stmmac_priv *priv) +{ + u32 tx_queues_count = priv->plat->tx_queues_to_use; + u32 mode_to_use; + u32 queue; + + for (queue = 0; queue < tx_queues_count; queue++) { + mode_to_use = priv->plat->tx_queues_cfg[queue].mode_to_use; + if (mode_to_use == MTL_QUEUE_DCB) + continue; + + priv->hw->mac->config_cbs(priv->hw, + priv->plat->tx_queues_cfg[queue].send_slope, + priv->plat->tx_queues_cfg[queue].idle_slope, + priv->plat->tx_queues_cfg[queue].high_credit, + priv->plat->tx_queues_cfg[queue].low_credit, + queue); + } +} + +/** + * stmmac_rx_queue_dma_chan_map - Map RX queue to RX dma channel + * @priv: driver private structure + * Description: It is used for mapping RX queues to RX dma channels + */ +static void stmmac_rx_queue_dma_chan_map(struct stmmac_priv *priv) +{ + u32 rx_queues_count = priv->plat->rx_queues_to_use; + u32 queue; + u32 chan; + + for (queue = 0; queue < rx_queues_count; queue++) { + chan = priv->plat->rx_queues_cfg[queue].chan; + priv->hw->mac->map_mtl_to_dma(priv->hw, queue, chan); + } +} + +/** + * stmmac_mtl_configuration - Configure MTL + * @priv: driver private structure + * Description: It is used for configurring MTL + */ +static void stmmac_mtl_configuration(struct stmmac_priv *priv) +{ + u32 rx_queues_count = priv->plat->rx_queues_to_use; + u32 tx_queues_count = priv->plat->tx_queues_to_use; + + if (tx_queues_count > 1 && priv->hw->mac->set_mtl_tx_queue_weight) + stmmac_set_tx_queue_weight(priv); + + /* Configure MTL RX algorithms */ + if (rx_queues_count > 1 && priv->hw->mac->prog_mtl_rx_algorithms) + priv->hw->mac->prog_mtl_rx_algorithms(priv->hw, + priv->plat->rx_sched_algorithm); + + /* Configure MTL TX algorithms */ + if (tx_queues_count > 1 && priv->hw->mac->prog_mtl_tx_algorithms) + priv->hw->mac->prog_mtl_tx_algorithms(priv->hw, + priv->plat->tx_sched_algorithm); + + /* Configure CBS in AVB TX queues */ + if (tx_queues_count > 1 && priv->hw->mac->config_cbs) + stmmac_configure_cbs(priv); + + /* Map RX MTL to DMA channels */ + if (rx_queues_count > 1 && priv->hw->mac->map_mtl_to_dma) + stmmac_rx_queue_dma_chan_map(priv); + + /* Enable MAC RX Queues */ + if (rx_queues_count > 1 && priv->hw->mac->rx_queue_enable) + stmmac_mac_enable_rx_queues(priv); +} + +/** * stmmac_hw_setup - setup mac in a usable state. * @dev : pointer to the device structure. * Description: @@ -1691,9 +1792,9 @@ static int stmmac_hw_setup(struct net_device *dev, bool init_ptp) /* Initialize the MAC Core */ priv->hw->mac->core_init(priv->hw, dev->mtu); - /* Initialize MAC RX Queues */ - if (priv->hw->mac->rx_queue_enable) - stmmac_mac_enable_rx_queues(priv); + /* Initialize MTL*/ + if (priv->synopsys_id >= DWMAC_CORE_4_00) + stmmac_mtl_configuration(priv); ret = priv->hw->mac->rx_ipc(priv->hw); if (!ret) { @@ -2829,6 +2930,11 @@ static irqreturn_t stmmac_interrupt(int irq, void *dev_id) if ((priv->plat->has_gmac) || (priv->plat->has_gmac4)) { int status = priv->hw->mac->host_irq_status(priv->hw, &priv->xstats); + + if (priv->synopsys_id >= DWMAC_CORE_4_00) + status |= priv->hw->mac->host_mtl_irq_status(priv->hw, + STMMAC_CHAN0); + if (unlikely(status)) { /* For LPI we need to save the tx status */ if (status & CORE_IRQ_TX_PATH_IN_LPI_MODE) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index fe49c3105755..37f550ae76a5 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -132,6 +132,118 @@ static struct stmmac_axi *stmmac_axi_setup(struct platform_device *pdev) } /** + * stmmac_mtl_setup - parse DT parameters for multiple queues configuration + * @pdev: platform device + */ +static void stmmac_mtl_setup(struct platform_device *pdev, + struct plat_stmmacenet_data *plat) +{ + struct device_node *q_node; + struct device_node *rx_node; + struct device_node *tx_node; + u8 queue = 0; + + rx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-rx-config", 0); + if (!rx_node) + return; + + tx_node = of_parse_phandle(pdev->dev.of_node, "snps,mtl-tx-config", 0); + if (!tx_node) { + of_node_put(rx_node); + return; + } + + /* Processing RX queues common config */ + if (of_property_read_u8(rx_node, "snps,rx-queues-to-use", + &plat->rx_queues_to_use)) + plat->rx_queues_to_use = 1; + + if (of_property_read_bool(rx_node, "snps,rx-sched-sp")) + plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; + else if (of_property_read_bool(rx_node, "snps,rx-sched-wsp")) + plat->rx_sched_algorithm = MTL_RX_ALGORITHM_WSP; + else + plat->rx_sched_algorithm = MTL_RX_ALGORITHM_SP; + + /* Processing individual RX queue config */ + for_each_child_of_node(rx_node, q_node) { + if (queue >= plat->rx_queues_to_use) + break; + + if (of_property_read_bool(q_node, "snps,dcb-algorithm")) + plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; + else if (of_property_read_bool(q_node, "snps,avb-algorithm")) + plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; + else + plat->rx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; + + if (of_property_read_u8(q_node, "snps,map-to-dma-channel", + &plat->rx_queues_cfg[queue].chan)) + plat->rx_queues_cfg[queue].chan = queue; + /* TODO: Dynamic mapping to be included in the future */ + + queue++; + } + + /* Processing TX queues common config */ + if (of_property_read_u8(tx_node, "snps,tx-queues-to-use", + &plat->tx_queues_to_use)) + plat->tx_queues_to_use = 1; + + if (of_property_read_bool(tx_node, "snps,tx-sched-wrr")) + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WRR; + else if (of_property_read_bool(tx_node, "snps,tx-sched-wfq")) + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_WFQ; + else if (of_property_read_bool(tx_node, "snps,tx-sched-dwrr")) + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_DWRR; + else if (of_property_read_bool(tx_node, "snps,tx-sched-sp")) + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP; + else + plat->tx_sched_algorithm = MTL_TX_ALGORITHM_SP; + + queue = 0; + + /* Processing individual TX queue config */ + for_each_child_of_node(tx_node, q_node) { + if (queue >= plat->tx_queues_to_use) + break; + + if (of_property_read_u8(q_node, "snps,weight", + &plat->tx_queues_cfg[queue].weight)) + plat->tx_queues_cfg[queue].weight = 0x10 + queue; + + if (of_property_read_bool(q_node, "snps,dcb-algorithm")) { + plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; + } else if (of_property_read_bool(q_node, + "snps,avb-algorithm")) { + plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_AVB; + + /* Credit Base Shaper parameters used by AVB */ + if (of_property_read_u32(q_node, "snps,send_slope", + &plat->tx_queues_cfg[queue].send_slope)) + plat->tx_queues_cfg[queue].send_slope = 0x0; + if (of_property_read_u32(q_node, "snps,idle_slope", + &plat->tx_queues_cfg[queue].idle_slope)) + plat->tx_queues_cfg[queue].idle_slope = 0x0; + if (of_property_read_u32(q_node, "snps,high_credit", + &plat->tx_queues_cfg[queue].high_credit)) + plat->tx_queues_cfg[queue].high_credit = 0x0; + if (of_property_read_u32(q_node, "snps,low_credit", + &plat->tx_queues_cfg[queue].low_credit)) + plat->tx_queues_cfg[queue].low_credit = 0x0; + } else { + plat->tx_queues_cfg[queue].mode_to_use = MTL_QUEUE_DCB; + } + + queue++; + } + + of_node_put(rx_node); + of_node_put(tx_node); + of_node_put(q_node); +} + +/** * stmmac_dt_phy - parse device-tree driver parameters to allocate PHY resources * @plat: driver data platform structure * @np: device tree node @@ -340,6 +452,8 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) plat->axi = stmmac_axi_setup(pdev); + stmmac_mtl_setup(pdev, plat); + /* clock setup */ plat->stmmac_clk = devm_clk_get(&pdev->dev, STMMAC_RESOURCE_NAME); diff --git a/include/linux/stmmac.h b/include/linux/stmmac.h index fc273e9d5f67..be47b859e954 100644 --- a/include/linux/stmmac.h +++ b/include/linux/stmmac.h @@ -28,6 +28,9 @@ #include <linux/platform_device.h> +#define MTL_MAX_RX_QUEUES 8 +#define MTL_MAX_TX_QUEUES 8 + #define STMMAC_RX_COE_NONE 0 #define STMMAC_RX_COE_TYPE1 1 #define STMMAC_RX_COE_TYPE2 2 @@ -44,6 +47,18 @@ #define STMMAC_CSR_150_250M 0x4 /* MDC = clk_scr_i/102 */ #define STMMAC_CSR_250_300M 0x5 /* MDC = clk_scr_i/122 */ +/* MTL algorithms identifiers */ +#define MTL_TX_ALGORITHM_WRR 0x0 +#define MTL_TX_ALGORITHM_WFQ 0x1 +#define MTL_TX_ALGORITHM_DWRR 0x2 +#define MTL_TX_ALGORITHM_SP 0x3 +#define MTL_RX_ALGORITHM_SP 0x4 +#define MTL_RX_ALGORITHM_WSP 0x5 + +/* RX/TX Queue Mode */ +#define MTL_QUEUE_DCB 0x0 +#define MTL_QUEUE_AVB 0x1 + /* The MDC clock could be set higher than the IEEE 802.3 * specified frequency limit 0f 2.5 MHz, by programming a clock divider * of value different than the above defined values. The resultant MDIO @@ -109,6 +124,21 @@ struct stmmac_axi { bool axi_rb; }; +struct stmmac_rxq_cfg { + u8 mode_to_use; + u8 chan; +}; + +struct stmmac_txq_cfg { + u8 weight; + u8 mode_to_use; + /* Credit Base Shaper parameters */ + u32 send_slope; + u32 idle_slope; + u32 high_credit; + u32 low_credit; +}; + struct plat_stmmacenet_data { int bus_id; int phy_addr; @@ -133,6 +163,12 @@ struct plat_stmmacenet_data { int unicast_filter_entries; int tx_fifo_size; int rx_fifo_size; + u8 rx_queues_to_use; + u8 tx_queues_to_use; + u8 rx_sched_algorithm; + u8 tx_sched_algorithm; + struct stmmac_rxq_cfg rx_queues_cfg[MTL_MAX_RX_QUEUES]; + struct stmmac_txq_cfg tx_queues_cfg[MTL_MAX_TX_QUEUES]; void (*fix_mac_speed)(void *priv, unsigned int speed); int (*init)(struct platform_device *pdev, void *priv); void (*exit)(struct platform_device *pdev, void *priv); |