diff options
Diffstat (limited to 'Documentation/admin-guide/kernel-parameters.txt')
| -rw-r--r-- | Documentation/admin-guide/kernel-parameters.txt | 125 |
1 files changed, 118 insertions, 7 deletions
diff --git a/Documentation/admin-guide/kernel-parameters.txt b/Documentation/admin-guide/kernel-parameters.txt index f1f2c0874da9..c1a5cd991f2e 100644 --- a/Documentation/admin-guide/kernel-parameters.txt +++ b/Documentation/admin-guide/kernel-parameters.txt @@ -633,6 +633,14 @@ named mounts. Specifying both "all" and "named" disables all v1 hierarchies. + cgroup_v1_proc= [KNL] Show also missing controllers in /proc/cgroups + Format: { "true" | "false" } + /proc/cgroups lists only v1 controllers by default. + This compatibility option enables listing also v2 + controllers (whose v1 code is not compiled!), so that + semi-legacy software can check this file to decide + about usage of v2 (sic) controllers. + cgroup_favordynmods= [KNL] Enable or Disable favordynmods. Format: { "true" | "false" } Defaults to the value of CONFIG_CGROUP_FAVOR_DYNMODS. @@ -986,6 +994,28 @@ 0: to disable low allocation. It will be ignored when crashkernel=X,high is not used or memory reserved is below 4G. + crashkernel=size[KMG],cma + [KNL, X86] Reserve additional crash kernel memory from + CMA. This reservation is usable by the first system's + userspace memory and kernel movable allocations (memory + balloon, zswap). Pages allocated from this memory range + will not be included in the vmcore so this should not + be used if dumping of userspace memory is intended and + it has to be expected that some movable kernel pages + may be missing from the dump. + + A standard crashkernel reservation, as described above, + is still needed to hold the crash kernel and initrd. + + This option increases the risk of a kdump failure: DMA + transfers configured by the first kernel may end up + corrupting the second kernel's memory. + + This reservation method is intended for systems that + can't afford to sacrifice enough memory for standard + crashkernel reservation and where less reliable and + possibly incomplete kdump is preferable to no kdump at + all. cryptomgr.notests [KNL] Disable crypto self-tests @@ -2212,6 +2242,11 @@ different crypto accelerators. This option can be used to achieve best performance for particular HW. + ima= [IMA] Enable or disable IMA + Format: { "off" | "on" } + Default: "on" + Note that disabling IMA is limited to kdump kernel. + indirect_target_selection= [X86,Intel] Mitigation control for Indirect Target Selection(ITS) bug in Intel CPUs. Updated microcode is also required for a fix in IBPB. @@ -2538,6 +2573,13 @@ requires the kernel to be built with CONFIG_ARM64_PSEUDO_NMI. + irqchip.riscv_imsic_noipi + [RISC-V,EARLY] + Force the kernel to not use IMSIC software injected MSIs + as IPIs. Intended for system where IMSIC is trap-n-emulated, + and thus want to reduce MMIO traps when triggering IPIs + to multiple harts. + irqfixup [HW] When an interrupt is not handled search all handlers for it. Intended to get systems with badly broken @@ -3790,6 +3832,10 @@ mmio_stale_data=full,nosmt [X86] retbleed=auto,nosmt [X86] + [X86] After one of the above options, additionally + supports attack-vector based controls as documented in + Documentation/admin-guide/hw-vuln/attack_vector_controls.rst + mminit_loglevel= [KNL,EARLY] When CONFIG_DEBUG_MEMORY_INIT is set, this parameter allows control of the logging verbosity for @@ -4533,7 +4579,7 @@ bit 2: print timer info bit 3: print locks info if CONFIG_LOCKDEP is on bit 4: print ftrace buffer - bit 5: print all printk messages in buffer + bit 5: replay all messages on consoles at the end of panic bit 6: print all CPUs backtrace (if available in the arch) bit 7: print only tasks in uninterruptible (blocked) state *Be aware* that this option may print a _lot_ of lines, @@ -4541,6 +4587,25 @@ Use this option carefully, maybe worth to setup a bigger log buffer with "log_buf_len" along with this. + panic_sys_info= A comma separated list of extra information to be dumped + on panic. + Format: val[,val...] + Where @val can be any of the following: + + tasks: print all tasks info + mem: print system memory info + timers: print timers info + locks: print locks info if CONFIG_LOCKDEP is on + ftrace: print ftrace buffer + all_bt: print all CPUs backtrace (if available in the arch) + blocked_tasks: print only tasks in uninterruptible (blocked) state + + This is a human readable alternative to the 'panic_print' option. + + panic_console_replay + When panic happens, replay all kernel messages on + consoles at the end of panic. + parkbd.port= [HW] Parallel port number the keyboard adapter is connected to, default is 0. Format: <parport#> @@ -5000,6 +5065,18 @@ that number, otherwise (e.g., 'pmu_override=on'), MMCR1 remains 0. + pm_async= [PM] + Format: off + This parameter sets the initial value of the + /sys/power/pm_async sysfs knob at boot time. + If set to "off", disables asynchronous suspend and + resume of devices during system-wide power transitions. + This can be useful on platforms where device + dependencies are not well-defined, or for debugging + power management issues. Asynchronous operations are + enabled by default. + + pm_debug_messages [SUSPEND,KNL] Enable suspend/resume debug messages during boot up. @@ -5485,7 +5562,8 @@ echo 1 > /sys/module/rcutree/parameters/rcu_normal_wake_from_gp or pass a boot parameter "rcutree.rcu_normal_wake_from_gp=1" - Default is 0. + Default is 1 if num_possible_cpus() <= 16 and it is not explicitly + disabled by the boot parameter passing 0. rcuscale.gp_async= [KNL] Measure performance of asynchronous @@ -6387,6 +6465,11 @@ sa1100ir [NET] See drivers/net/irda/sa1100_ir.c. + sched_proxy_exec= [KNL] + Enables or disables "proxy execution" style + solution to mutex-based priority inversion. + Format: <bool> + sched_verbose [KNL,EARLY] Enables verbose scheduler debug messages. schedstats= [KNL,X86] Enable or disable scheduled statistics. @@ -6558,14 +6641,14 @@ slab_debug can create guard zones around objects and may poison objects when not in use. Also tracks the last alloc / free. For more information see - Documentation/mm/slub.rst. + Documentation/admin-guide/mm/slab.rst. (slub_debug legacy name also accepted for now) slab_max_order= [MM] Determines the maximum allowed order for slabs. A high setting may cause OOMs due to memory fragmentation. For more information see - Documentation/mm/slub.rst. + Documentation/admin-guide/mm/slab.rst. (slub_max_order legacy name also accepted for now) slab_merge [MM] @@ -6580,13 +6663,14 @@ the number of objects indicated. The higher the number of objects the smaller the overhead of tracking slabs and the less frequently locks need to be acquired. - For more information see Documentation/mm/slub.rst. + For more information see + Documentation/admin-guide/mm/slab.rst. (slub_min_objects legacy name also accepted for now) slab_min_order= [MM] Determines the minimum page order for slabs. Must be lower or equal to slab_max_order. For more information see - Documentation/mm/slub.rst. + Documentation/admin-guide/mm/slab.rst. (slub_min_order legacy name also accepted for now) slab_nomerge [MM] @@ -6600,7 +6684,8 @@ cache (risks via metadata attacks are mostly unchanged). Debug options disable merging on their own. - For more information see Documentation/mm/slub.rst. + For more information see + Documentation/admin-guide/mm/slab.rst. (slub_nomerge legacy name also accepted for now) slab_strict_numa [MM] @@ -6988,6 +7073,11 @@ consumed by the stack hash table. By default this is set to false. + stack_depot_max_pools= [KNL,EARLY] + Specify the maximum number of pools to use for storing + stack traces. Pools are allocated on-demand up to this + limit. Default value is 8191 pools. + stacktrace [FTRACE] Enabled the stack tracer on boot up. @@ -7214,6 +7304,14 @@ causing a major performance hit, and the space where machines are deployed is by other means guarded. + tpm_crb_ffa.busy_timeout_ms= [ARM64,TPM] + Maximum time in milliseconds to retry sending a message + to the TPM service before giving up. This parameter controls + how long the system will continue retrying when the TPM + service is busy. + Format: <unsigned int> + Default: 2000 (2 seconds) + tpm_suspend_pcr=[HW,TPM] Format: integer pcr id Specify that at suspend time, the tpm driver @@ -7488,6 +7586,19 @@ having this key zero'ed is acceptable. E.g. in testing scenarios. + tsa= [X86] Control mitigation for Transient Scheduler + Attacks on AMD CPUs. Search the following in your + favourite search engine for more details: + + "Technical guidance for mitigating transient scheduler + attacks". + + off - disable the mitigation + on - enable the mitigation (default) + user - mitigate only user/kernel transitions + vm - mitigate only guest/host transitions + + tsc= Disable clocksource stability checks for TSC. Format: <string> [x86] reliable: mark tsc clocksource as reliable, this |