1 files changed, 0 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt b/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt
deleted file mode 100644
index 9d6dcd3fe7f9..000000000000
--- a/Documentation/devicetree/bindings/gpio/cavium-octeon-gpio.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* General Purpose Input Output (GPIO) bus.
-
-Properties:
-- compatible: "cavium,octeon-3860-gpio"
-
-  Compatibility with all cn3XXX, cn5XXX and cn6XXX SOCs.
-
-- reg: The base address of the GPIO unit's register bank.
-
-- gpio-controller: This is a GPIO controller.
-
-- #gpio-cells: Must be <2>.  The first cell is the GPIO pin.
-
-- interrupt-controller: The GPIO controller is also an interrupt
-  controller, many of its pins may be configured as an interrupt
-  source.
-
-- #interrupt-cells: Must be <2>.  The first cell is the GPIO pin
-   connected to the interrupt source.  The second cell is the interrupt
-   triggering protocol and may have one of four values:
-   1 - edge triggered on the rising edge.
-   2 - edge triggered on the falling edge
-   4 - level triggered active high.
-   8 - level triggered active low.
-
-- interrupts: Interrupt routing for each pin.
-
-Example:
-
-	gpio-controller@1070000000800 {
-		#gpio-cells = <2>;
-		compatible = "cavium,octeon-3860-gpio";
-		reg = <0x10700 0x00000800 0x0 0x100>;
-		gpio-controller;
-		/* Interrupts are specified by two parts:
-		 * 1) GPIO pin number (0..15)
-		 * 2) Triggering (1 - edge rising
-		 *		  2 - edge falling
-		 *		  4 - level active high
-		 *		  8 - level active low)
-		 */
-		interrupt-controller;
-		#interrupt-cells = <2>;
-		/* The GPIO pin connect to 16 consecutive CUI bits */
-		interrupts = <0 16>, <0 17>, <0 18>, <0 19>,
-			     <0 20>, <0 21>, <0 22>, <0 23>,
-			     <0 24>, <0 25>, <0 26>, <0 27>,
-			     <0 28>, <0 29>, <0 30>, <0 31>;
-	};