diff options
Diffstat (limited to 'Documentation/devicetree/bindings/gpio/gpio-pisosr.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/gpio/gpio-pisosr.txt | 34 |
1 files changed, 0 insertions, 34 deletions
diff --git a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt b/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt deleted file mode 100644 index fba3c61f6a5b..000000000000 --- a/Documentation/devicetree/bindings/gpio/gpio-pisosr.txt +++ /dev/null @@ -1,34 +0,0 @@ -Generic Parallel-in/Serial-out Shift Register GPIO Driver - -This binding describes generic parallel-in/serial-out shift register -devices that can be used for GPI (General Purpose Input). This includes -SN74165 serial-out shift registers and the SN65HVS88x series of -industrial serializers. - -Required properties: - - compatible : Should be "pisosr-gpio". - - gpio-controller : Marks the device node as a GPIO controller. - - #gpio-cells : Should be two. For consumer use see gpio.txt. - -Optional properties: - - ngpios : Number of used GPIO lines (0..n-1), default is 8. - - load-gpios : GPIO pin specifier attached to load enable, this - pin is pulsed before reading from the device to - load input pin values into the device. - -For other required and optional properties of SPI slave -nodes please refer to ../spi/spi-bus.txt. - -Example: - - gpio@0 { - compatible = "ti,sn65hvs882", "pisosr-gpio"; - gpio-controller; - #gpio-cells = <2>; - - load-gpios = <&gpio2 23 GPIO_ACTIVE_LOW>; - - reg = <0>; - spi-max-frequency = <1000000>; - spi-cpol; - }; |