1 files changed, 0 insertions, 59 deletions
diff --git a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt b/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
deleted file mode 100644
index 627efc78ecf2..000000000000
--- a/Documentation/devicetree/bindings/gpio/nxp,lpc1850-gpio.txt
+++ /dev/null
@@ -1,59 +0,0 @@
-NXP LPC18xx/43xx GPIO controller Device Tree Bindings
------------------------------------------------------
-
-Required properties:
-- compatible		: Should be "nxp,lpc1850-gpio"
-- reg			: List of addresses and lengths of the GPIO controller
-			  register sets
-- reg-names		: Should be "gpio", "gpio-pin-ic", "gpio-group0-ic" and
-			  "gpio-gpoup1-ic"
-- clocks		: Phandle and clock specifier pair for GPIO controller
-- resets		: Phandle and reset specifier pair for GPIO controller
-- gpio-controller	: Marks the device node as a GPIO controller
-- #gpio-cells 		: Should be two:
-			  - The first cell is the GPIO line number
-			  - The second cell is used to specify polarity
-- interrupt-controller	: Marks the device node as an interrupt controller
-- #interrupt-cells	: Should be two:
-			  - The first cell is an interrupt number within
-			    0..9 range, for GPIO pin interrupts it is equal
-			    to 'nxp,gpio-pin-interrupt' property value of
-			    GPIO pin configuration, 8 is for GPIO GROUP0
-			    interrupt, 9 is for GPIO GROUP1 interrupt
-			  - The second cell is used to specify interrupt type
-
-Optional properties:
-- gpio-ranges		: Mapping between GPIO and pinctrl
-
-Example:
-#define LPC_GPIO(port, pin)	(port * 32 + pin)
-#define LPC_PIN(port, pin)	(0x##port * 32 + pin)
-
-gpio: gpio@400f4000 {
-	compatible = "nxp,lpc1850-gpio";
-	reg = <0x400f4000 0x4000>, <0x40087000 0x1000>,
-	      <0x40088000 0x1000>, <0x40089000 0x1000>;
-	reg-names = "gpio", "gpio-pin-ic",
-		    "gpio-group0-ic", "gpio-gpoup1-ic";
-	clocks = <&ccu1 CLK_CPU_GPIO>;
-	resets = <&rgu 28>;
-	gpio-controller;
-	#gpio-cells = <2>;
-	interrupt-controller;
-	#interrupt-cells = <2>;
-	gpio-ranges =	<&pinctrl LPC_GPIO(0,0)  LPC_PIN(0,0)  2>,
-			...
-			<&pinctrl LPC_GPIO(7,19) LPC_PIN(f,5)  7>;
-};
-
-gpio_joystick {
-	compatible = "gpio-keys";
-	...
-
-	button0 {
-		...
-		interrupt-parent = <&gpio>;
-		interrupts = <1 IRQ_TYPE_EDGE_BOTH>;
-		gpios = <&gpio LPC_GPIO(4,8) GPIO_ACTIVE_LOW>;
-	};
-};