summaryrefslogtreecommitdiff
path: root/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml')
-rw-r--r--Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml43
1 files changed, 37 insertions, 6 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
index 52d3f1ce3367..1180d2ffbf84 100644
--- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml
@@ -45,6 +45,14 @@ properties:
"#size-cells":
const: 0
+ '#trigger-source-cells':
+ description: |
+ Cell indicates the output signal: 0 = BUSY, 1 = FIRSTDATA.
+
+ For convenience, macros for these values are available in
+ dt-bindings/iio/adc/adi,ad7606.h.
+ const: 1
+
# According to the datasheet, "Data is clocked in from SDI on the falling
# edge of SCLK, while data is clocked out on DOUTA on the rising edge of
# SCLK". Also, even if not stated textually in the datasheet, it is made
@@ -196,6 +204,15 @@ patternProperties:
considered a bipolar differential channel. Otherwise it is bipolar
single-ended.
+ adi,rfilter-ohms:
+ description:
+ For ADCs that supports gain calibration, this property must be set to
+ the value of the external RFilter resistor. Proper gain error
+ correction is applied based on this value.
+ default: 0
+ minimum: 0
+ maximum: 64512
+
required:
- reg
- bipolar
@@ -215,12 +232,6 @@ allOf:
- required:
- pwms
- - oneOf:
- - required:
- - interrupts
- - required:
- - io-backends
-
- if:
properties:
compatible:
@@ -260,6 +271,25 @@ allOf:
- adi,ad7607
- adi,ad7608
- adi,ad7609
+ - adi,ad7616
+ then:
+ patternProperties:
+ "^channel@[0-9a-f]+$":
+ properties:
+ adi,rfilter-ohms: false
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - adi,ad7605-4
+ - adi,ad7606-4
+ - adi,ad7606-6
+ - adi,ad7606-8
+ - adi,ad7607
+ - adi,ad7608
+ - adi,ad7609
then:
properties:
adi,sw-mode: false
@@ -390,6 +420,7 @@ examples:
reg = <8>;
diff-channels = <8 8>;
bipolar;
+ adi,rfilter-ohms = <2048>;
};
};