diff options
Diffstat (limited to 'Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml')
| -rw-r--r-- | Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml | 68 |
1 files changed, 67 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml index 3ce59d4d065f..c06d0fc791d3 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7768-1.yaml @@ -26,7 +26,26 @@ properties: clock-names: const: mclk + trigger-sources: + $ref: /schemas/types.yaml#/definitions/phandle-array + minItems: 1 + maxItems: 2 + description: | + A list of phandles referencing trigger source providers. Each entry + represents a trigger source for the ADC: + + - First entry specifies the device responsible for driving the + synchronization (SYNC_IN) pin, as an alternative to adi,sync-in-gpios. + This can be a `gpio-trigger` or another `ad7768-1` device. If the + device's own SYNC_OUT pin is internally connected to its SYNC_IN pin, + reference the device itself or omit this property. + - Second entry optionally defines a GPIO3 pin used as a START signal trigger. + + Use the accompanying trigger source cell to identify the type of each entry. + interrupts: + description: + DRDY (Data Ready) pin, which signals conversion results are available. maxItems: 1 '#address-cells': @@ -47,6 +66,19 @@ properties: in any way, for example if the filter decimation rate changes. As the line is active low, it should be marked GPIO_ACTIVE_LOW. + regulators: + type: object + description: + list of regulators provided by this controller. + + properties: + vcm-output: + $ref: /schemas/regulator/regulator.yaml# + type: object + unevaluatedProperties: false + + additionalProperties: false + reset-gpios: maxItems: 1 @@ -57,6 +89,23 @@ properties: "#io-channel-cells": const: 1 + "#trigger-source-cells": + description: | + Cell indicates the trigger output signal: 0 = SYNC_OUT, 1 = GPIO3, + 2 = DRDY. + + For better readability, macros for these values are available in + dt-bindings/iio/adc/adi,ad7768-1.h. + const: 1 + + gpio-controller: true + + "#gpio-cells": + const: 2 + description: | + The first cell is for the GPIO number: 0 to 3. + The second cell takes standard GPIO flags. + required: - compatible - reg @@ -65,7 +114,16 @@ required: - vref-supply - spi-cpol - spi-cpha - - adi,sync-in-gpios + +dependencies: + adi,sync-in-gpios: + not: + required: + - trigger-sources + trigger-sources: + not: + required: + - adi,sync-in-gpios patternProperties: "^channel@([0-9]|1[0-5])$": @@ -105,6 +163,8 @@ examples: spi-max-frequency = <2000000>; spi-cpol; spi-cpha; + gpio-controller; + #gpio-cells = <2>; vref-supply = <&adc_vref>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; interrupt-parent = <&gpio>; @@ -120,6 +180,12 @@ examples: reg = <0>; label = "channel_0"; }; + + regulators { + vcm_reg: vcm-output { + regulator-name = "ad7768-1-vcm"; + }; + }; }; }; ... |