diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
4 files changed, 308 insertions, 14 deletions
diff --git a/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml index ee2272f754a3..2d4ecee3f254 100644 --- a/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml +++ b/Documentation/devicetree/bindings/mfd/adi,adp5585.yaml @@ -15,14 +15,21 @@ description: properties: compatible: - items: - - enum: - - adi,adp5585-00 # Default - - adi,adp5585-01 # 11 GPIOs - - adi,adp5585-02 # No pull-up resistors by default on special pins - - adi,adp5585-03 # Alternate I2C address - - adi,adp5585-04 # Pull-down resistors on all pins by default - - const: adi,adp5585 + oneOf: + - items: + - enum: + - adi,adp5585-00 # Default + - adi,adp5585-01 # 11 GPIOs + - adi,adp5585-02 # No pull-up resistors by default on special pins + - adi,adp5585-03 # Alternate I2C address + - adi,adp5585-04 # Pull-down resistors on all pins by default + - const: adi,adp5585 + - items: + - enum: + - adi,adp5589-00 # Default + - adi,adp5589-01 # R4 defaulted to RESET1 output + - adi,adp5589-02 # Pull-down resistors by default on special pins + - const: adi,adp5589 reg: maxItems: 1 @@ -32,6 +39,9 @@ properties: vdd-supply: true + reset-gpios: + maxItems: 1 + gpio-controller: true '#gpio-cells': @@ -42,6 +52,84 @@ properties: "#pwm-cells": const: 3 + interrupt-controller: true + + '#interrupt-cells': + const: 2 + + poll-interval: + enum: [10, 20, 30, 40] + default: 10 + + adi,keypad-pins: + description: Specifies the pins used for the keypad matrix. + $ref: /schemas/types.yaml#/definitions/uint32-array + + adi,unlock-events: + description: + Specifies a maximum of 2 events that can be used to unlock the keypad. + If this property is set, the keyboard will be locked and only unlocked + after these keys/gpis are pressed. The value 127 serves as a wildcard which + means any key can be used for unlocking. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + items: + anyOf: + - minimum: 1 + maximum: 88 + - minimum: 97 + maximum: 115 + - const: 127 + + adi,unlock-trigger-sec: + description: + Defines the time in which the second unlock event must occur after the + first unlock event has occurred. + maximum: 7 + default: 0 + + adi,reset1-events: + description: + Defines the trigger events (key/gpi presses) that can generate reset + conditions one the reset1 block. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 3 + + adi,reset2-events: + description: + Defines the trigger events (key/gpi presses) that can generate reset + conditions one the reset2 block. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 1 + maxItems: 2 + + adi,reset1-active-high: + description: Sets the reset1 signal as active high. + type: boolean + + adi,reset2-active-high: + description: Sets the reset2 signal as active high. + type: boolean + + adi,rst-passthrough-enable: + description: Allows the RST pin to override (OR with) the reset1 signal. + type: boolean + + adi,reset-trigger-ms: + description: + Defines the length of time that the reset events must be active before a + reset signal is generated. All events must be active at the same time for + the same duration. + enum: [0, 1000, 1500, 2000, 2500, 3000, 3500, 4000] + default: 0 + + adi,reset-pulse-width-us: + description: Defines the pulse width of the reset signals. + enum: [500, 1000, 2000, 10000] + default: 500 + patternProperties: "-hog(-[0-9]+)?$": type: object @@ -49,14 +137,28 @@ patternProperties: required: - gpio-hog +dependencies: + linux,keymap: + - adi,keypad-pins + - interrupts + interrupt-controller: + - interrupts + adi,unlock-trigger-sec: + - adi,unlock-events + adi,reset1-active-high: + - adi,reset1-events + adi,rst-passtrough-enable: + - adi,reset1-events + adi,reset2-active-high: + - adi,reset2-events + required: - compatible - reg - - gpio-controller - - "#gpio-cells" - - "#pwm-cells" allOf: + - $ref: /schemas/input/matrix-keymap.yaml# + - $ref: /schemas/input/input.yaml# - if: properties: compatible: @@ -64,9 +166,60 @@ allOf: const: adi,adp5585-01 then: properties: + adi,unlock-events: false + adi,unlock-trigger-sec: false gpio-reserved-ranges: false - else: + reset-gpios: false + adi,keypad-pins: + minItems: 2 + maxItems: 11 + items: + minimum: 0 + maximum: 10 + adi,reset1-events: + items: + anyOf: + - minimum: 1 + maximum: 30 + - minimum: 37 + maximum: 47 + adi,reset2-events: + items: + anyOf: + - minimum: 1 + maximum: 30 + - minimum: 37 + maximum: 47 + - if: properties: + compatible: + contains: + enum: + - adi,adp5585-00 + - adi,adp5585-02 + - adi,adp5585-03 + - adi,adp5585-04 + then: + properties: + adi,unlock-events: false + adi,unlock-trigger-sec: false + adi,keypad-pins: + minItems: 2 + maxItems: 10 + items: + enum: [0, 1, 2, 3, 4, 6, 7, 8, 9, 10] + adi,reset1-events: + items: + anyOf: + - minimum: 1 + maximum: 25 + - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47] + adi,reset2-events: + items: + anyOf: + - minimum: 1 + maximum: 25 + - enum: [37, 38, 39, 40, 41, 43, 44, 45, 46, 47] gpio-reserved-ranges: maxItems: 1 items: @@ -74,10 +227,44 @@ allOf: - const: 5 - const: 1 -additionalProperties: false + - if: + properties: + compatible: + contains: + enum: + - adi,adp5589-00 + - adi,adp5589-01 + - adi,adp5589-02 + then: + properties: + gpio-reserved-ranges: false + adi,keypad-pins: + minItems: 2 + maxItems: 19 + items: + minimum: 0 + maximum: 18 + adi,reset1-events: + items: + anyOf: + - minimum: 1 + maximum: 88 + - minimum: 97 + maximum: 115 + adi,reset2-events: + items: + anyOf: + - minimum: 1 + maximum: 88 + - minimum: 97 + maximum: 115 + +unevaluatedProperties: false examples: - | + #include <dt-bindings/input/input.h> + #include <dt-bindings/interrupt-controller/irq.h> i2c { #address-cells = <1>; #size-cells = <0>; @@ -93,6 +280,33 @@ examples: gpio-reserved-ranges = <5 1>; #pwm-cells = <3>; + + interrupts = <16 IRQ_TYPE_EDGE_FALLING>; + interrupt-parent = <&gpio>; + + adi,reset1-events = <1 43>; + adi,reset2-events = <2 3>; + adi,reset-trigger-ms = <2000>; + + /* + * col0, col1, col2 + * row0, row1, row2 + */ + adi,keypad-pins = <0 1 2 6 7 8>; + + linux,keymap = < + MATRIX_KEY(0x00, 0x00, KEY_1) + MATRIX_KEY(0x00, 0x01, KEY_2) + MATRIX_KEY(0x00, 0x02, KEY_3) + + MATRIX_KEY(0x01, 0x00, KEY_A) + MATRIX_KEY(0x01, 0x01, KEY_B) + MATRIX_KEY(0x01, 0x02, KEY_C) + + MATRIX_KEY(0x02, 0x00, BTN_1) + MATRIX_KEY(0x02, 0x01, BTN_2) + MATRIX_KEY(0x02, 0x02, BTN_3) + >; }; }; diff --git a/Documentation/devicetree/bindings/mfd/apple,smc.yaml b/Documentation/devicetree/bindings/mfd/apple,smc.yaml new file mode 100644 index 000000000000..8a10e270d421 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/apple,smc.yaml @@ -0,0 +1,79 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/apple,smc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Apple Mac System Management Controller + +maintainers: + - Sven Peter <sven@kernel.org> + +description: + Apple Mac System Management Controller implements various functions + such as GPIO, RTC, power, reboot. + +properties: + compatible: + items: + - enum: + - apple,t6000-smc + - apple,t8103-smc + - apple,t8112-smc + - const: apple,smc + + reg: + items: + - description: SMC area + - description: SRAM area + + reg-names: + items: + - const: smc + - const: sram + + mboxes: + maxItems: 1 + + gpio: + $ref: /schemas/gpio/apple,smc-gpio.yaml + + reboot: + $ref: /schemas/power/reset/apple,smc-reboot.yaml + +additionalProperties: false + +required: + - compatible + - reg + - reg-names + - mboxes + +examples: + - | + soc { + #address-cells = <2>; + #size-cells = <2>; + + smc@23e400000 { + compatible = "apple,t8103-smc", "apple,smc"; + reg = <0x2 0x3e400000 0x0 0x4000>, + <0x2 0x3fe00000 0x0 0x100000>; + reg-names = "smc", "sram"; + mboxes = <&smc_mbox>; + + smc_gpio: gpio { + compatible = "apple,smc-gpio"; + gpio-controller; + #gpio-cells = <2>; + }; + + reboot { + compatible = "apple,smc-reboot"; + nvmem-cells = <&shutdown_flag>, <&boot_stage>, + <&boot_error_count>, <&panic_count>; + nvmem-cell-names = "shutdown_flag", "boot_stage", + "boot_error_count", "panic_count"; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/lp3943.txt b/Documentation/devicetree/bindings/mfd/lp3943.txt index e8591d6b11b4..ca5324ed0df4 100644 --- a/Documentation/devicetree/bindings/mfd/lp3943.txt +++ b/Documentation/devicetree/bindings/mfd/lp3943.txt @@ -7,7 +7,7 @@ Required properties: LP3943 consists of two sub-devices, lp3943-gpio and lp3943-pwm. For the LP3943 GPIO properties please refer to: -Documentation/devicetree/bindings/gpio/gpio-lp3943.txt +Documentation/devicetree/bindings/gpio/trivial-gpio.yaml For the LP3943 PWM properties please refer to: Documentation/devicetree/bindings/pwm/pwm-lp3943.txt diff --git a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml index 6341b6070366..a48cb00afe43 100644 --- a/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml +++ b/Documentation/devicetree/bindings/mfd/ti,tps6594.yaml @@ -22,6 +22,7 @@ properties: - ti,tps6593-q1 - ti,tps6594-q1 - ti,tps65224-q1 + - ti,tps652g1 reg: description: I2C slave address or SPI chip select number. |