diff options
Diffstat (limited to 'Documentation/devicetree/bindings/mfd')
8 files changed, 624 insertions, 442 deletions
diff --git a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml b/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml deleted file mode 100644 index 20067002cc4a..000000000000 --- a/Documentation/devicetree/bindings/mfd/fsl,imx8qxp-csr.yaml +++ /dev/null @@ -1,192 +0,0 @@ -# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) -%YAML 1.2 ---- -$id: http://devicetree.org/schemas/mfd/fsl,imx8qxp-csr.yaml# -$schema: http://devicetree.org/meta-schemas/core.yaml# - -title: Freescale i.MX8qm/qxp Control and Status Registers Module - -maintainers: - - Liu Ying <victor.liu@nxp.com> - -description: | - As a system controller, the Freescale i.MX8qm/qxp Control and Status - Registers(CSR) module represents a set of miscellaneous registers of a - specific subsystem. It may provide control and/or status report interfaces - to a mix of standalone hardware devices within that subsystem. One typical - use-case is for some other nodes to acquire a reference to the syscon node - by phandle, and the other typical use-case is that the operating system - should consider all subnodes of the CSR module as separate child devices. - -properties: - $nodename: - pattern: "^syscon@[0-9a-f]+$" - - compatible: - items: - - enum: - - fsl,imx8qxp-mipi-lvds-csr - - fsl,imx8qm-lvds-csr - - const: syscon - - const: simple-mfd - - reg: - maxItems: 1 - - clocks: - maxItems: 1 - - clock-names: - const: ipg - -patternProperties: - "^(ldb|phy|pxl2dpi)$": - type: object - description: The possible child devices of the CSR module. - -required: - - compatible - - reg - - clocks - - clock-names - -allOf: - - if: - properties: - compatible: - contains: - const: fsl,imx8qxp-mipi-lvds-csr - then: - required: - - pxl2dpi - - ldb - - - if: - properties: - compatible: - contains: - const: fsl,imx8qm-lvds-csr - then: - required: - - phy - - ldb - -additionalProperties: false - -examples: - - | - #include <dt-bindings/clock/imx8-lpcg.h> - #include <dt-bindings/firmware/imx/rsrc.h> - mipi_lvds_0_csr: syscon@56221000 { - compatible = "fsl,imx8qxp-mipi-lvds-csr", "syscon", "simple-mfd"; - reg = <0x56221000 0x1000>; - clocks = <&mipi_lvds_0_di_mipi_lvds_regs_lpcg IMX_LPCG_CLK_4>; - clock-names = "ipg"; - - mipi_lvds_0_pxl2dpi: pxl2dpi { - compatible = "fsl,imx8qxp-pxl2dpi"; - fsl,sc-resource = <IMX_SC_R_MIPI_0>; - power-domains = <&pd IMX_SC_R_MIPI_0>; - - ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - - mipi_lvds_0_pxl2dpi_dc0_pixel_link0: endpoint@0 { - reg = <0>; - remote-endpoint = <&dc0_pixel_link0_mipi_lvds_0_pxl2dpi>; - }; - - mipi_lvds_0_pxl2dpi_dc0_pixel_link1: endpoint@1 { - reg = <1>; - remote-endpoint = <&dc0_pixel_link1_mipi_lvds_0_pxl2dpi>; - }; - }; - - port@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - - mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0: endpoint@0 { - reg = <0>; - remote-endpoint = <&mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi>; - }; - - mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1: endpoint@1 { - reg = <1>; - remote-endpoint = <&mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi>; - }; - }; - }; - }; - - mipi_lvds_0_ldb: ldb { - #address-cells = <1>; - #size-cells = <0>; - compatible = "fsl,imx8qxp-ldb"; - clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_MISC2>, - <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_BYPASS>; - clock-names = "pixel", "bypass"; - power-domains = <&pd IMX_SC_R_LVDS_0>; - - channel@0 { - #address-cells = <1>; - #size-cells = <0>; - reg = <0>; - phys = <&mipi_lvds_0_phy>; - phy-names = "lvds_phy"; - - port@0 { - reg = <0>; - - mipi_lvds_0_ldb_ch0_mipi_lvds_0_pxl2dpi: endpoint { - remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch0>; - }; - }; - - port@1 { - reg = <1>; - - /* ... */ - }; - }; - - channel@1 { - #address-cells = <1>; - #size-cells = <0>; - reg = <1>; - phys = <&mipi_lvds_0_phy>; - phy-names = "lvds_phy"; - - port@0 { - reg = <0>; - - mipi_lvds_0_ldb_ch1_mipi_lvds_0_pxl2dpi: endpoint { - remote-endpoint = <&mipi_lvds_0_pxl2dpi_mipi_lvds_0_ldb_ch1>; - }; - }; - - port@1 { - reg = <1>; - - /* ... */ - }; - }; - }; - }; - - mipi_lvds_0_phy: phy@56228300 { - compatible = "fsl,imx8qxp-mipi-dphy"; - reg = <0x56228300 0x100>; - clocks = <&clk IMX_SC_R_LVDS_0 IMX_SC_PM_CLK_PHY>; - clock-names = "phy_ref"; - #phy-cells = <0>; - fsl,syscon = <&mipi_lvds_0_csr>; - power-domains = <&pd IMX_SC_R_MIPI_0>; - }; diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt b/Documentation/devicetree/bindings/mfd/mxs-lradc.txt deleted file mode 100644 index 755cbef0647d..000000000000 --- a/Documentation/devicetree/bindings/mfd/mxs-lradc.txt +++ /dev/null @@ -1,45 +0,0 @@ -* Freescale MXS LRADC device driver - -Required properties: -- compatible: Should be "fsl,imx23-lradc" for i.MX23 SoC and "fsl,imx28-lradc" - for i.MX28 SoC -- reg: Address and length of the register set for the device -- interrupts: Should contain the LRADC interrupts - -Optional properties: -- fsl,lradc-touchscreen-wires: Number of wires used to connect the touchscreen - to LRADC. Valid value is either 4 or 5. If this - property is not present, then the touchscreen is - disabled. 5 wires is valid for i.MX28 SoC only. -- fsl,ave-ctrl: number of samples per direction to calculate an average value. - Allowed value is 1 ... 32, default is 4 -- fsl,ave-delay: delay between consecutive samples. Allowed value is - 2 ... 2048. It is used if 'fsl,ave-ctrl' > 1, counts at - 2 kHz and its default is 2 (= 1 ms) -- fsl,settling: delay between plate switch to next sample. Allowed value is - 1 ... 2047. It counts at 2 kHz and its default is - 10 (= 5 ms) - -Example for i.MX23 SoC: - - lradc@80050000 { - compatible = "fsl,imx23-lradc"; - reg = <0x80050000 0x2000>; - interrupts = <36 37 38 39 40 41 42 43 44>; - fsl,lradc-touchscreen-wires = <4>; - fsl,ave-ctrl = <4>; - fsl,ave-delay = <2>; - fsl,settling = <10>; - }; - -Example for i.MX28 SoC: - - lradc@80050000 { - compatible = "fsl,imx28-lradc"; - reg = <0x80050000 0x2000>; - interrupts = <10 14 15 16 17 18 19 20 21 22 23 24 25>; - fsl,lradc-touchscreen-wires = <5>; - fsl,ave-ctrl = <4>; - fsl,ave-delay = <2>; - fsl,settling = <10>; - }; diff --git a/Documentation/devicetree/bindings/mfd/mxs-lradc.yaml b/Documentation/devicetree/bindings/mfd/mxs-lradc.yaml new file mode 100644 index 000000000000..782b2f4005a0 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/mxs-lradc.yaml @@ -0,0 +1,134 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/mxs-lradc.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Freescale MXS Low-Resolution ADC (LRADC) + +maintainers: + - Dario Binacchi <dario.binacchi@amarulasolutions.com> + +description: + The LRADC provides 16 physical channels of 12-bit resolution for + analog-to-digital conversion and includes an integrated 4-wire/5-wire + touchscreen controller. + +properties: + compatible: + items: + - enum: + - fsl,imx23-lradc + - fsl,imx28-lradc + + reg: + maxItems: 1 + + clocks: + minItems: 1 + + interrupts: + minItems: 9 + maxItems: 13 + + fsl,lradc-touchscreen-wires: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [4, 5] + description: > + Number of wires used to connect the touchscreen to LRADC. + + If this property is not present, then the touchscreen is disabled. + + fsl,ave-ctrl: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 32 + default: 4 + description: + Number of samples per direction to calculate an average value. + + fsl,ave-delay: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 2 + maximum: 2048 + default: 2 + description: > + Delay between consecutive samples. + + It is used if 'fsl,ave-ctrl' > 1, counts at 2 kHz and its default value (2) + is 1 ms. + + fsl,settling: + $ref: /schemas/types.yaml#/definitions/uint32 + minimum: 1 + maximum: 2047 + default: 10 + description: > + Delay between plate switch to next sample. + + It counts at 2 kHz and its default (10) is 5 ms. + + "#io-channel-cells": + const: 1 + +required: + - compatible + - reg + - clocks + - interrupts + +if: + properties: + compatible: + contains: + enum: + - fsl,imx23-lradc +then: + properties: + interrupts: + items: + - description: channel 0 + - description: channel 1 + - description: channel 2 + - description: channel 3 + - description: channel 4 + - description: channel 5 + - description: touchscreen + - description: channel 6 + - description: channel 7 + fsl,lradc-touchscreen-wires: + const: 4 +else: + properties: + interrupts: + items: + - description: threshold 0 + - description: threshold 1 + - description: channel 0 + - description: channel 1 + - description: channel 2 + - description: channel 3 + - description: channel 4 + - description: channel 5 + - description: button 0 + - description: button 1 + - description: touchscreen + - description: channel 6 + - description: channel 7 + +additionalProperties: false + +examples: + - | + lradc@80050000 { + compatible = "fsl,imx23-lradc"; + reg = <0x80050000 0x2000>; + interrupts = <36>, <37>, <38>, <39>, <40>, + <41>, <42>, <43>, <44>; + clocks = <&clks 26>; + #io-channel-cells = <1>; + fsl,lradc-touchscreen-wires = <4>; + fsl,ave-ctrl = <4>; + fsl,ave-delay = <2>; + fsl,settling = <10>; + }; diff --git a/Documentation/devicetree/bindings/mfd/nxp,lpc1850-creg.yaml b/Documentation/devicetree/bindings/mfd/nxp,lpc1850-creg.yaml new file mode 100644 index 000000000000..89b4892e9ca7 --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/nxp,lpc1850-creg.yaml @@ -0,0 +1,148 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/nxp,lpc1850-creg.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: The NXP LPC18xx/43xx CREG (Configuration Registers) block + +maintainers: + - Frank Li <Frank.Li@nxp.com> + +properties: + compatible: + items: + - enum: + - nxp,lpc1850-creg + - const: syscon + - const: simple-mfd + + reg: + maxItems: 1 + + clocks: + maxItems: 1 + + resets: + maxItems: 1 + + clock-controller: + type: object + description: + The NXP LPC18xx/43xx CREG (Configuration Registers) block contains + control registers for two low speed clocks. One of the clocks is a + 32 kHz oscillator driver with power up/down and clock gating. Next + is a fixed divider that creates a 1 kHz clock from the 32 kHz osc. + + These clocks are used by the RTC and the Event Router peripherals. + The 32 kHz can also be routed to other peripherals to enable low + power modes. + + properties: + compatible: + const: nxp,lpc1850-creg-clk + + clocks: + maxItems: 1 + + '#clock-cells': + const: 1 + description: | + 0 1 kHz clock + 1 32 kHz Oscillator + + required: + - compatible + - clocks + - '#clock-cells' + + additionalProperties: false + + phy: + type: object + description: the internal USB OTG PHY in NXP LPC18xx and LPC43xx SoCs + properties: + compatible: + const: nxp,lpc1850-usb-otg-phy + + clocks: + maxItems: 1 + + '#phy-cells': + const: 0 + + required: + - compatible + - clocks + - '#phy-cells' + + additionalProperties: false + + dma-mux: + type: object + description: NXP LPC18xx/43xx DMA MUX (DMA request router) + properties: + compatible: + const: nxp,lpc1850-dmamux + + '#dma-cells': + const: 3 + description: | + Should be set to <3>. + * 1st cell contain the master dma request signal + * 2nd cell contain the mux value (0-3) for the peripheral + * 3rd cell contain either 1 or 2 depending on the AHB master used. + + dma-requests: + $ref: /schemas/types.yaml#/definitions/uint32 + maximum: 64 + description: Number of DMA requests the controller can handle + + dma-masters: + $ref: /schemas/types.yaml#/definitions/phandle + description: phandle pointing to the DMA controller + + required: + - compatible + - '#dma-cells' + - dma-masters + + additionalProperties: false + +required: + - compatible + - reg + - clocks + - resets + +additionalProperties: false + +examples: + - | + #include <dt-bindings/clock/lpc18xx-ccu.h> + + syscon@40043000 { + compatible = "nxp,lpc1850-creg", "syscon", "simple-mfd"; + reg = <0x40043000 0x1000>; + clocks = <&ccu1 CLK_CPU_CREG>; + resets = <&rgu 5>; + + clock-controller { + compatible = "nxp,lpc1850-creg-clk"; + clocks = <&xtal32>; + #clock-cells = <1>; + }; + + phy { + compatible = "nxp,lpc1850-usb-otg-phy"; + clocks = <&ccu1 CLK_USB0>; + #phy-cells = <0>; + }; + + dma-mux { + compatible = "nxp,lpc1850-dmamux"; + #dma-cells = <3>; + dma-requests = <64>; + dma-masters = <&dmac>; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml index 3c2b06629b75..eb5bca31948e 100644 --- a/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml +++ b/Documentation/devicetree/bindings/mfd/rockchip,rk806.yaml @@ -31,6 +31,27 @@ properties: system-power-controller: true + rockchip,reset-mode: + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2] + description: + Mode to use when a reset of the PMIC is triggered. + + The reset can be triggered either programmatically, via one of + the PWRCTRL pins (provided additional configuration) or + asserting RESETB pin low. + + The following modes are supported + + - 0; restart PMU, + - 1; reset all power off reset registers and force state to + switch to ACTIVE mode, + - 2; same as mode 1 and also pull RESETB pin down for 5ms, + + For example, some hardware may require a full restart (mode 0) + in order to function properly as regulators are shortly + interrupted in this mode. + vcc1-supply: description: The input supply for dcdc-reg1. diff --git a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml index d6b9e2914796..31d544a9c05c 100644 --- a/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml +++ b/Documentation/devicetree/bindings/mfd/samsung,s2mps11.yaml @@ -81,6 +81,9 @@ allOf: samsung,s2mps11-acokb-ground: false samsung,s2mps11-wrstbi-ground: false + # oneOf is required, because dtschema's fixups.py doesn't handle this + # nesting here. Its special treatment to allow either interrupt property + # when only one is specified in the binding works at the top level only. oneOf: - required: [interrupts] - required: [interrupts-extended] diff --git a/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml b/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml new file mode 100644 index 000000000000..a2668fc30a7b --- /dev/null +++ b/Documentation/devicetree/bindings/mfd/ti,tps65910.yaml @@ -0,0 +1,318 @@ +# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/mfd/ti,tps65910.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: TI TPS65910 Power Management Integrated Circuit + +maintainers: + - Shree Ramamoorthy <s-ramamoorthy@ti.com> + +description: + TPS65910 device is a Power Management IC that provides 3 step-down converters, + 1 stepup converter, and 8 LDOs. The device contains an embedded power controller (EPC), + 1 GPIO, and an RTC. + +properties: + compatible: + enum: + - ti,tps65910 + - ti,tps65911 + + reg: + description: I2C slave address + maxItems: 1 + + gpio-controller: true + + '#gpio-cells': + const: 2 + description: | + The first cell is the GPIO number. + The second cell is used to specify additional options <unused>. + + interrupts: + maxItems: 1 + + interrupt-controller: true + + '#interrupt-cells': + description: Specifies the IRQ number and flags + const: 2 + + ti,vmbch-threshold: + description: | + (TPS65911) Main battery charged threshold comparator. + See VMBCH_VSEL in TPS65910 datasheet. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + ti,vmbch2-threshold: + description: | + (TPS65911) Main battery discharged threshold comparator. + See VMBCH_VSEL in TPS65910 datasheet. + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 3] + + ti,en-ck32k-xtal: + type: boolean + description: Enable external 32-kHz crystal oscillator. + + ti,en-gpio-sleep: + description: | + Enable sleep control for gpios. + $ref: /schemas/types.yaml#/definitions/uint32-array + minItems: 9 + maxItems: 9 + items: + minimum: 0 + maximum: 1 + + ti,system-power-controller: + type: boolean + description: Identify whether or not this pmic controls the system power + + ti,sleep-enable: + type: boolean + description: Enable SLEEP state. + + ti,sleep-keep-therm: + type: boolean + description: Keep thermal monitoring on in sleep state. + + ti,sleep-keep-ck32k: + type: boolean + description: Keep the 32KHz clock output on in sleep state. + + ti,sleep-keep-hsclk: + type: boolean + description: Keep high speed internal clock on in sleep state. + + regulators: + type: object + additionalProperties: false + description: List of regulators provided by this controller. + + patternProperties: + "^(vrtc|vio|vpll|vdac|vmmc|vbb|vddctrl)$": + type: object + $ref: /schemas/regulator/regulator.yaml# + properties: + ti,regulator-ext-sleep-control: + description: | + Enable external sleep control through external inputs: + [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]. + If this property is not defined, it defaults to 0 (not enabled). + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 4, 8] + unevaluatedProperties: false + + "^(vdd[1-3]|vaux([1-2]|33)|vdig[1-2])$": + type: object + $ref: /schemas/regulator/regulator.yaml# + properties: + ti,regulator-ext-sleep-control: + description: | + Enable external sleep control through external inputs: + [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]. + If this property is not defined, it defaults to 0 (not enabled). + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 4, 8] + unevaluatedProperties: false + + "^ldo[1-8]$": + type: object + $ref: /schemas/regulator/regulator.yaml# + properties: + ti,regulator-ext-sleep-control: + description: | + Enable external sleep control through external inputs: + [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)]. + If this property is not defined, it defaults to 0 (not enabled). + $ref: /schemas/types.yaml#/definitions/uint32 + enum: [0, 1, 2, 4, 8] + unevaluatedProperties: false + +patternProperties: + "^(vcc(io|[1-7])-supply)$": + description: | + Input voltage supply phandle for regulators. + These entries are required if PMIC regulators are enabled, or else it + can cause the regulator registration to fail. + + If some input supply is powered through battery or always-on supply, then + it is also required to have these parameters with the proper node handle for always-on + power supply. + tps65910: + vcc1-supply: VDD1 input. + vcc2-supply: VDD2 input. + vcc3-supply: VAUX33 and VMMC input. + vcc4-supply: VAUX1 and VAUX2 input. + vcc5-supply: VPLL and VDAC input. + vcc6-supply: VDIG1 and VDIG2 input. + vcc7-supply: VRTC and VBB input. + vccio-supply: VIO input. + tps65911: + vcc1-supply: VDD1 input. + vcc2-supply: VDD2 input. + vcc3-supply: LDO6, LDO7 and LDO8 input. + vcc4-supply: LDO5 input. + vcc5-supply: LDO3 and LDO4 input. + vcc6-supply: LDO1 and LDO2 input. + vcc7-supply: VRTC input. + vccio-supply: VIO input. + +required: + - compatible + - reg + - interrupts + - interrupt-controller + - '#interrupt-cells' + - gpio-controller + - '#gpio-cells' + - regulators + +additionalProperties: false + +allOf: + - if: + properties: + compatible: + contains: + enum: + - ti,tps65910 + then: + properties: + regulators: + patternProperties: + "^(ldo[1-8]|vddctrl)$": false + - if: + properties: + compatible: + contains: + enum: + - ti,tps65911 + then: + properties: + regulators: + patternProperties: + "^(vdd3|vaux([1-2]|33)|vdig[1-2])$": false + "^(vpll|vdac|vmmc|vbb)$": false + +examples: + - | + #include <dt-bindings/interrupt-controller/arm-gic.h> + i2c { + #address-cells = <1>; + #size-cells = <0>; + + pmic: tps65910@2d { + compatible = "ti,tps65910"; + reg = <0x2d>; + interrupt-parent = <&intc>; + interrupts = < 0 118 0x04 >; + + #gpio-cells = <2>; + gpio-controller; + + #interrupt-cells = <2>; + interrupt-controller; + + ti,system-power-controller; + + ti,vmbch-threshold = <0>; + ti,vmbch2-threshold = <0>; + ti,en-ck32k-xtal; + ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; + + vcc1-supply = <®_parent>; + vcc2-supply = <&some_reg>; + vcc3-supply = <&vbat>; + vcc4-supply = <&vbat>; + vcc5-supply = <&vbat>; + vcc6-supply = <&vbat>; + vcc7-supply = <&vbat>; + vccio-supply = <&vbat>; + + regulators { + vio_reg: vio { + regulator-name = "vio"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + vdd1_reg: vdd1 { + regulator-name = "vdd1"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + ti,regulator-ext-sleep-control = <0>; + }; + vdd2_reg: vdd2 { + regulator-name = "vdd2"; + regulator-min-microvolt = < 600000>; + regulator-max-microvolt = <1500000>; + regulator-always-on; + regulator-boot-on; + }; + vdd3_reg: vdd3 { + regulator-name = "vdd3"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + vdig1_reg: vdig1 { + regulator-name = "vdig1"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <2700000>; + regulator-always-on; + }; + vdig2_reg: vdig2 { + regulator-name = "vdig2"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + vpll_reg: vpll { + regulator-name = "vpll"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <2500000>; + regulator-always-on; + }; + vdac_reg: vdac { + regulator-name = "vdac"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + vaux1_reg: vaux1 { + regulator-name = "vaux1"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <2850000>; + regulator-always-on; + }; + vaux2_reg: vaux2 { + regulator-name = "vaux2"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vaux33_reg: vaux33 { + regulator-name = "vaux33"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + vmmc_reg: vmmc { + regulator-name = "vmmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + }; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/mfd/tps65910.txt b/Documentation/devicetree/bindings/mfd/tps65910.txt deleted file mode 100644 index a5ced46bbde9..000000000000 --- a/Documentation/devicetree/bindings/mfd/tps65910.txt +++ /dev/null @@ -1,205 +0,0 @@ -TPS65910 Power Management Integrated Circuit - -Required properties: -- compatible: "ti,tps65910" or "ti,tps65911" -- reg: I2C slave address -- interrupts: the interrupt outputs of the controller -- #gpio-cells: number of cells to describe a GPIO, this should be 2. - The first cell is the GPIO number. - The second cell is used to specify additional options <unused>. -- gpio-controller: mark the device as a GPIO controller -- #interrupt-cells: the number of cells to describe an IRQ, this should be 2. - The first cell is the IRQ number. - The second cell is the flags, encoded as the trigger masks from - Documentation/devicetree/bindings/interrupt-controller/interrupts.txt -- regulators: This is the list of child nodes that specify the regulator - initialization data for defined regulators. Not all regulators for the given - device need to be present. The definition for each of these nodes is defined - using the standard binding for regulators found at - Documentation/devicetree/bindings/regulator/regulator.txt. - The regulator is matched with the regulator-compatible. - - The valid regulator-compatible values are: - tps65910: vrtc, vio, vdd1, vdd2, vdd3, vdig1, vdig2, vpll, vdac, vaux1, - vaux2, vaux33, vmmc, vbb - tps65911: vrtc, vio, vdd1, vdd2, vddctrl, ldo1, ldo2, ldo3, ldo4, ldo5, - ldo6, ldo7, ldo8 - -- xxx-supply: Input voltage supply regulator. - These entries are required if regulators are enabled for a device. Missing these - properties can cause the regulator registration to fail. - If some of input supply is powered through battery or always-on supply then - also it is require to have these parameters with proper node handle of always - on power supply. - tps65910: - vcc1-supply: VDD1 input. - vcc2-supply: VDD2 input. - vcc3-supply: VAUX33 and VMMC input. - vcc4-supply: VAUX1 and VAUX2 input. - vcc5-supply: VPLL and VDAC input. - vcc6-supply: VDIG1 and VDIG2 input. - vcc7-supply: VRTC and VBB input. - vccio-supply: VIO input. - tps65911: - vcc1-supply: VDD1 input. - vcc2-supply: VDD2 input. - vcc3-supply: LDO6, LDO7 and LDO8 input. - vcc4-supply: LDO5 input. - vcc5-supply: LDO3 and LDO4 input. - vcc6-supply: LDO1 and LDO2 input. - vcc7-supply: VRTC input. - vccio-supply: VIO input. - -Optional properties: -- ti,vmbch-threshold: (tps65911) main battery charged threshold - comparator. (see VMBCH_VSEL in TPS65910 datasheet) -- ti,vmbch2-threshold: (tps65911) main battery discharged threshold - comparator. (see VMBCH_VSEL in TPS65910 datasheet) -- ti,en-ck32k-xtal: enable external 32-kHz crystal oscillator (see CK32K_CTRL - in TPS6591X datasheet) -- ti,en-gpio-sleep: enable sleep control for gpios - There should be 9 entries here, one for each gpio. -- ti,system-power-controller: Telling whether or not this pmic is controlling - the system power. -- ti,sleep-enable: Enable SLEEP state. -- ti,sleep-keep-therm: Keep thermal monitoring on in sleep state. -- ti,sleep-keep-ck32k: Keep the 32KHz clock output on in sleep state. -- ti,sleep-keep-hsclk: Keep high speed internal clock on in sleep state. - -Regulator Optional properties: -- ti,regulator-ext-sleep-control: enable external sleep - control through external inputs [0 (not enabled), 1 (EN1), 2 (EN2) or 4(EN3)] - If this property is not defined, it defaults to 0 (not enabled). - -Example: - - pmu: tps65910@d2 { - compatible = "ti,tps65910"; - reg = <0xd2>; - interrupt-parent = <&intc>; - interrupts = < 0 118 0x04 >; - - #gpio-cells = <2>; - gpio-controller; - - #interrupt-cells = <2>; - interrupt-controller; - - ti,system-power-controller; - - ti,vmbch-threshold = 0; - ti,vmbch2-threshold = 0; - ti,en-ck32k-xtal; - ti,en-gpio-sleep = <0 0 1 0 0 0 0 0 0>; - - vcc1-supply = <®_parent>; - vcc2-supply = <&some_reg>; - vcc3-supply = <...>; - vcc4-supply = <...>; - vcc5-supply = <...>; - vcc6-supply = <...>; - vcc7-supply = <...>; - vccio-supply = <...>; - - regulators { - #address-cells = <1>; - #size-cells = <0>; - - vdd1_reg: regulator@0 { - regulator-compatible = "vdd1"; - reg = <0>; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <0>; - }; - vdd2_reg: regulator@1 { - regulator-compatible = "vdd2"; - reg = <1>; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1500000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <4>; - }; - vddctrl_reg: regulator@2 { - regulator-compatible = "vddctrl"; - reg = <2>; - regulator-min-microvolt = < 600000>; - regulator-max-microvolt = <1400000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <0>; - }; - vio_reg: regulator@3 { - regulator-compatible = "vio"; - reg = <3>; - regulator-min-microvolt = <1500000>; - regulator-max-microvolt = <1800000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <1>; - }; - ldo1_reg: regulator@4 { - regulator-compatible = "ldo1"; - reg = <4>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo2_reg: regulator@5 { - regulator-compatible = "ldo2"; - reg = <5>; - regulator-min-microvolt = <1050000>; - regulator-max-microvolt = <1050000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo3_reg: regulator@6 { - regulator-compatible = "ldo3"; - reg = <6>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo4_reg: regulator@7 { - regulator-compatible = "ldo4"; - reg = <7>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - ti,regulator-ext-sleep-control = <0>; - }; - ldo5_reg: regulator@8 { - regulator-compatible = "ldo5"; - reg = <8>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo6_reg: regulator@9 { - regulator-compatible = "ldo6"; - reg = <9>; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - ti,regulator-ext-sleep-control = <0>; - }; - ldo7_reg: regulator@10 { - regulator-compatible = "ldo7"; - reg = <10>; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-always-on; - regulator-boot-on; - ti,regulator-ext-sleep-control = <1>; - }; - ldo8_reg: regulator@11 { - regulator-compatible = "ldo8"; - reg = <11>; - regulator-min-microvolt = <1000000>; - regulator-max-microvolt = <3300000>; - regulator-always-on; - ti,regulator-ext-sleep-control = <1>; - }; - }; - }; |