1 files changed, 0 insertions, 50 deletions
diff --git a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt b/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
deleted file mode 100644
index 2bf31572b08d..000000000000
--- a/Documentation/devicetree/bindings/net/marvell-armada-370-neta.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Marvell Armada 370 / Armada XP / Armada 3700 Ethernet Controller (NETA)
-
-Required properties:
-- compatible: could be one of the following:
-	"marvell,armada-370-neta"
-	"marvell,armada-xp-neta"
-	"marvell,armada-3700-neta"
-	"marvell,armada-ac5-neta"
-- reg: address and length of the register set for the device.
-- interrupts: interrupt for the device
-- phy: See ethernet.txt file in the same directory.
-- phy-mode: See ethernet.txt file in the same directory
-- clocks: List of clocks for this device. At least one clock is
-  mandatory for the core clock. If several clocks are given, then the
-  clock-names property must be used to identify them.
-
-Optional properties:
-- tx-csum-limit: maximum mtu supported by port that allow TX checksum.
-  Value is presented in bytes. If not used, by default 1600B is set for
-  "marvell,armada-370-neta" and 9800B for others.
-- clock-names: List of names corresponding to clocks property; shall be
-  "core" for core clock and "bus" for the optional bus clock.
-- phys: comphy for the ethernet port, see ../phy/phy-bindings.txt
-
-Optional properties (valid only for Armada XP/38x):
-
-- buffer-manager: a phandle to a buffer manager node. Please refer to
-  Documentation/devicetree/bindings/net/marvell-neta-bm.txt
-- bm,pool-long: ID of a pool, that will accept all packets of a size
-  higher than 'short' pool's threshold (if set) and up to MTU value.
-  Obligatory, when the port is supposed to use hardware
-  buffer management.
-- bm,pool-short: ID of a pool, that will be used for accepting
-  packets of a size lower than given threshold. If not set, the port
-  will use a single 'long' pool for all packets, as defined above.
-
-Example:
-
-ethernet@70000 {
-	compatible = "marvell,armada-370-neta";
-	reg = <0x70000 0x2500>;
-	interrupts = <8>;
-	clocks = <&gate_clk 4>;
-	tx-csum-limit = <9800>
-	phy = <&phy0>;
-	phy-mode = "rgmii-id";
-	buffer-manager = <&bm>;
-	bm,pool-long = <0>;
-	bm,pool-short = <1>;
-};