diff options
Diffstat (limited to 'Documentation/devicetree/bindings/powerpc')
| -rw-r--r-- | Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt | 111 | ||||
| -rw-r--r-- | Documentation/devicetree/bindings/powerpc/nintendo/wii.txt | 4 |
2 files changed, 0 insertions, 115 deletions
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt b/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt deleted file mode 100644 index f8d2b7fe06d6..000000000000 --- a/Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt +++ /dev/null @@ -1,111 +0,0 @@ -* Freescale MSI interrupt controller - -Required properties: -- compatible : compatible list, may contain one or two entries - The first is "fsl,CHIP-msi", where CHIP is the processor(mpc8610, mpc8572, - etc.) and the second is "fsl,mpic-msi" or "fsl,ipic-msi" or - "fsl,mpic-msi-v4.3" depending on the parent type and version. If mpic - version is 4.3, the number of MSI registers is increased to 16, MSIIR1 is - provided to access these 16 registers, and compatible "fsl,mpic-msi-v4.3" - should be used. The first entry is optional; the second entry is - required. - -- reg : It may contain one or two regions. The first region should contain - the address and the length of the shared message interrupt register set. - The second region should contain the address of aliased MSIIR or MSIIR1 - register for platforms that have such an alias, if using MSIIR1, the second - region must be added because different MSI group has different MSIIR1 offset. - -- interrupts : each one of the interrupts here is one entry per 32 MSIs, - and routed to the host interrupt controller. the interrupts should - be set as edge sensitive. If msi-available-ranges is present, only - the interrupts that correspond to available ranges shall be present. - -Optional properties: -- msi-available-ranges: use <start count> style section to define which - msi interrupt can be used in the 256 msi interrupts. This property is - optional, without this, all the MSI interrupts can be used. - Each available range must begin and end on a multiple of 32 (i.e. - no splitting an individual MSI register or the associated PIC interrupt). - MPIC v4.3 does not support this property because the 32 interrupts of an - individual register are not continuous when using MSIIR1. - -- msi-address-64: 64-bit PCI address of the MSIIR register. The MSIIR register - is used for MSI messaging. The address of MSIIR in PCI address space is - the MSI message address. - - This property may be used in virtualized environments where the hypervisor - has created an alternate mapping for the MSIR block. See below for an - explanation. - - -Example: - msi@41600 { - compatible = "fsl,mpc8610-msi", "fsl,mpic-msi"; - reg = <0x41600 0x80>; - msi-available-ranges = <0 0x100>; - interrupts = < - 0xe0 0 - 0xe1 0 - 0xe2 0 - 0xe3 0 - 0xe4 0 - 0xe5 0 - 0xe6 0 - 0xe7 0>; - interrupt-parent = <&mpic>; - }; - - msi@41600 { - compatible = "fsl,mpic-msi-v4.3"; - reg = <0x41600 0x200 0x44148 4>; - interrupts = < - 0xe0 0 0 0 - 0xe1 0 0 0 - 0xe2 0 0 0 - 0xe3 0 0 0 - 0xe4 0 0 0 - 0xe5 0 0 0 - 0xe6 0 0 0 - 0xe7 0 0 0 - 0x100 0 0 0 - 0x101 0 0 0 - 0x102 0 0 0 - 0x103 0 0 0 - 0x104 0 0 0 - 0x105 0 0 0 - 0x106 0 0 0 - 0x107 0 0 0>; - }; - -The Freescale hypervisor and msi-address-64 -------------------------------------------- -Normally, PCI devices have access to all of CCSR via an ATMU mapping. The -Freescale MSI driver calculates the address of MSIIR (in the MSI register -block) and sets that address as the MSI message address. - -In a virtualized environment, the hypervisor may need to create an IOMMU -mapping for MSIIR. The Freescale ePAPR hypervisor has this requirement -because of hardware limitations of the Peripheral Access Management Unit -(PAMU), which is currently the only IOMMU that the hypervisor supports. -The ATMU is programmed with the guest physical address, and the PAMU -intercepts transactions and reroutes them to the true physical address. - -In the PAMU, each PCI controller is given only one primary window. The -PAMU restricts DMA operations so that they can only occur within a window. -Because PCI devices must be able to DMA to memory, the primary window must -be used to cover all of the guest's memory space. - -PAMU primary windows can be divided into 256 subwindows, and each -subwindow can have its own address mapping ("guest physical" to "true -physical"). However, each subwindow has to have the same alignment, which -means they cannot be located at just any address. Because of these -restrictions, it is usually impossible to create a 4KB subwindow that -covers MSIIR where it's normally located. - -Therefore, the hypervisor has to create a subwindow inside the same -primary window used for memory, but mapped to the MSIR block (where MSIIR -lives). The first subwindow after the end of guest memory is used for -this. The address specified in the msi-address-64 property is the PCI -address of MSIIR. The hypervisor configures the PAMU to map that address to -the true physical address of MSIIR. diff --git a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt index 6f69a9dfe198..df060a0d7d4a 100644 --- a/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt +++ b/Documentation/devicetree/bindings/powerpc/nintendo/wii.txt @@ -139,10 +139,6 @@ Nintendo Wii device tree - interrupt-controller - interrupts : should contain the cascade interrupt of the "flipper" pic -1.l) The General Purpose I/O (GPIO) controller node - - see Documentation/devicetree/bindings/gpio/nintendo,hollywood-gpio.txt - 1.m) The control node Represents the control interface used to setup several miscellaneous |