1 files changed, 0 insertions, 83 deletions
diff --git a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt b/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
deleted file mode 100644
index 05d5be48dae4..000000000000
--- a/Documentation/devicetree/bindings/reset/nxp,lpc1850-rgu.txt
+++ /dev/null
@@ -1,83 +0,0 @@
-NXP LPC1850  Reset Generation Unit (RGU)
-========================================
-
-Please also refer to reset.txt in this directory for common reset
-controller binding usage.
-
-Required properties:
-- compatible: Should be "nxp,lpc1850-rgu"
-- reg: register base and length
-- clocks: phandle and clock specifier to RGU clocks
-- clock-names: should contain "delay" and "reg"
-- #reset-cells: should be 1
-
-See table below for valid peripheral reset numbers. Numbers not
-in the table below are either reserved or not applicable for
-normal operation.
-
-Reset	Peripheral
-  9	System control unit (SCU)
- 12	ARM Cortex-M0 subsystem core (LPC43xx only)
- 13	CPU core
- 16	LCD controller
- 17	USB0
- 18	USB1
- 19	DMA
- 20	SDIO
- 21	External memory controller (EMC)
- 22	Ethernet
- 25	Flash bank A
- 27	EEPROM
- 28	GPIO
- 29	Flash bank B
- 32	Timer0
- 33	Timer1
- 34	Timer2
- 35	Timer3
- 36	Repetitive Interrupt timer (RIT)
- 37	State Configurable Timer (SCT)
- 38	Motor control PWM (MCPWM)
- 39	QEI
- 40	ADC0
- 41	ADC1
- 42	DAC
- 44	USART0
- 45	UART1
- 46	USART2
- 47	USART3
- 48	I2C0
- 49	I2C1
- 50	SSP0
- 51	SSP1
- 52	I2S0 and I2S1
- 53	Serial Flash Interface (SPIFI)
- 54	C_CAN1
- 55	C_CAN0
- 56	ARM Cortex-M0 application core (LPC4370 only)
- 57	SGPIO (LPC43xx only)
- 58	SPI (LPC43xx only)
- 60	ADCHS (12-bit ADC) (LPC4370 only)
-
-Refer to NXP LPC18xx or LPC43xx user manual for more details about
-the reset signals and the connected block/peripheral.
-
-Reset provider example:
-rgu: reset-controller@40053000 {
-	compatible = "nxp,lpc1850-rgu";
-	reg = <0x40053000 0x1000>;
-	clocks = <&cgu BASE_SAFE_CLK>, <&ccu1 CLK_CPU_BUS>;
-	clock-names = "delay", "reg";
-	#reset-cells = <1>;
-};
-
-Reset consumer example:
-mac: ethernet@40010000 {
-	compatible = "nxp,lpc1850-dwmac", "snps,dwmac-3.611", "snps,dwmac";
-	reg = <0x40010000 0x2000>;
-	interrupts = <5>;
-	interrupt-names = "macirq";
-	clocks = <&ccu1 CLK_CPU_ETHERNET>;
-	clock-names = "stmmaceth";
-	resets = <&rgu 22>;
-	reset-names = "stmmaceth";
-};