1 files changed, 0 insertions, 31 deletions
diff --git a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt b/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
deleted file mode 100644
index 07013fa60a48..000000000000
--- a/Documentation/devicetree/bindings/serial/cirrus,clps711x-uart.txt
+++ /dev/null
@@ -1,31 +0,0 @@
-* Cirrus Logic CLPS711X Universal Asynchronous Receiver/Transmitter (UART)
-
-Required properties:
-- compatible: Should be "cirrus,ep7209-uart".
-- reg: Address and length of the register set for the device.
-- interrupts: Should contain UART TX and RX interrupt.
-- clocks: Should contain UART core clock number.
-- syscon: Phandle to SYSCON node, which contain UART control bits.
-
-Optional properties:
-- {rts,cts,dtr,dsr,rng,dcd}-gpios: specify a GPIO for RTS/CTS/DTR/DSR/RI/DCD
-  line respectively.
-
-Note: Each UART port should have an alias correctly numbered
-in "aliases" node.
-
-Example:
-	aliases {
-		serial0 = &uart1;
-	};
-
-	uart1: uart@80000480 {
-		compatible = "cirrus,ep7312-uart","cirrus,ep7209-uart";
-		reg = <0x80000480 0x80>;
-		interrupts = <12 13>;
-		clocks = <&clks 11>;
-		syscon = <&syscon1>;
-		cts-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
-		dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
-		dcd-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
-	};