diff options
Diffstat (limited to 'Documentation/devicetree')
14 files changed, 62 insertions, 34 deletions
diff --git a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml index 2985c8c717d7..5403242545ab 100644 --- a/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml +++ b/Documentation/devicetree/bindings/clock/mediatek,mt8188-clock.yaml @@ -52,6 +52,9 @@ properties: '#clock-cells': const: 1 + '#reset-cells': + const: 1 + required: - compatible - reg diff --git a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml index 9b5f3f3eab19..e69b6343a8eb 100644 --- a/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml +++ b/Documentation/devicetree/bindings/display/bridge/ti,sn65dsi83.yaml @@ -118,15 +118,11 @@ $defs: ti,lvds-vod-swing-clock-microvolt: description: LVDS diferential output voltage <min max> for clock lanes in microvolts. - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 2 maxItems: 2 ti,lvds-vod-swing-data-microvolt: description: LVDS diferential output voltage <min max> for data lanes in microvolts. - $ref: /schemas/types.yaml#/definitions/uint32-array - minItems: 2 maxItems: 2 allOf: diff --git a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml index eddfd329c67b..69ac5db8b914 100644 --- a/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml +++ b/Documentation/devicetree/bindings/i2c/realtek,rtl9301-i2c.yaml @@ -26,7 +26,8 @@ properties: - const: realtek,rtl9301-i2c reg: - description: Register offset and size this I2C controller. + items: + - description: Register offset and size this I2C controller. "#address-cells": const: 1 diff --git a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml index 29f12d650442..1a5209139e13 100644 --- a/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml +++ b/Documentation/devicetree/bindings/iio/adc/adi,ad7606.yaml @@ -223,12 +223,6 @@ allOf: - required: - pwms - - oneOf: - - required: - - interrupts - - required: - - io-backends - - if: properties: compatible: diff --git a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml index d1a6103fc37a..f3242dc0e7e6 100644 --- a/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml +++ b/Documentation/devicetree/bindings/iio/gyroscope/invensense,mpu3050.yaml @@ -21,7 +21,7 @@ properties: vlogic-supply: true interrupts: - minItems: 1 + maxItems: 1 description: Interrupt mapping for the trigger interrupt from the internal oscillator. diff --git a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml index cb3e1801b0d3..0840e4ab28b7 100644 --- a/Documentation/devicetree/bindings/input/elan,ekth6915.yaml +++ b/Documentation/devicetree/bindings/input/elan,ekth6915.yaml @@ -4,14 +4,14 @@ $id: http://devicetree.org/schemas/input/elan,ekth6915.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: Elan eKTH6915 touchscreen controller +title: Elan I2C-HID touchscreen controllers maintainers: - Douglas Anderson <dianders@chromium.org> description: - Supports the Elan eKTH6915 touchscreen controller. - This touchscreen controller uses the i2c-hid protocol with a reset GPIO. + Supports the Elan eKTH6915 and other I2C-HID touchscreen controllers. + These touchscreen controller use the i2c-hid protocol with a reset GPIO. allOf: - $ref: /schemas/input/touchscreen/touchscreen.yaml# @@ -23,12 +23,14 @@ properties: - enum: - elan,ekth5015m - const: elan,ekth6915 + - items: + - const: elan,ekth8d18 + - const: elan,ekth6a12nay - enum: - elan,ekth6915 - elan,ekth6a12nay - reg: - const: 0x10 + reg: true interrupts: maxItems: 1 diff --git a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml index 7b6a2fde8175..19934d5c24e5 100644 --- a/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml +++ b/Documentation/devicetree/bindings/net/allwinner,sun8i-a83t-emac.yaml @@ -23,7 +23,7 @@ properties: - allwinner,sun20i-d1-emac - allwinner,sun50i-h6-emac - allwinner,sun50i-h616-emac0 - - allwinner,sun55i-a523-emac0 + - allwinner,sun55i-a523-gmac0 - const: allwinner,sun50i-a64-emac reg: diff --git a/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml index 4dd2dc9c678b..8afbd9ebd73f 100644 --- a/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml +++ b/Documentation/devicetree/bindings/net/sophgo,sg2044-dwmac.yaml @@ -80,6 +80,8 @@ examples: interrupt-parent = <&intc>; interrupts = <296 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "macirq"; + phy-handle = <&phy0>; + phy-mode = "rgmii-id"; resets = <&rst 30>; reset-names = "stmmaceth"; snps,multicast-filter-bins = <0>; @@ -91,7 +93,6 @@ examples: snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; snps,axi-config = <&gmac0_stmmac_axi_setup>; - status = "disabled"; gmac0_mtl_rx_setup: rx-queues-config { snps,rx-queues-to-use = <8>; diff --git a/Documentation/devicetree/bindings/serial/8250.yaml b/Documentation/devicetree/bindings/serial/8250.yaml index 33d2016b6509..c6bc27709bf7 100644 --- a/Documentation/devicetree/bindings/serial/8250.yaml +++ b/Documentation/devicetree/bindings/serial/8250.yaml @@ -45,7 +45,7 @@ allOf: - ns16550 - ns16550a then: - anyOf: + oneOf: - required: [ clock-frequency ] - required: [ clocks ] diff --git a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt b/Documentation/devicetree/bindings/serial/altera_jtaguart.txt deleted file mode 100644 index 55a901051e8f..000000000000 --- a/Documentation/devicetree/bindings/serial/altera_jtaguart.txt +++ /dev/null @@ -1,5 +0,0 @@ -Altera JTAG UART - -Required properties: -- compatible : should be "ALTR,juart-1.0" <DEPRECATED> -- compatible : should be "altr,juart-1.0" diff --git a/Documentation/devicetree/bindings/serial/altera_uart.txt b/Documentation/devicetree/bindings/serial/altera_uart.txt deleted file mode 100644 index 81bf7ffb1a81..000000000000 --- a/Documentation/devicetree/bindings/serial/altera_uart.txt +++ /dev/null @@ -1,8 +0,0 @@ -Altera UART - -Required properties: -- compatible : should be "ALTR,uart-1.0" <DEPRECATED> -- compatible : should be "altr,uart-1.0" - -Optional properties: -- clock-frequency : frequency of the clock input to the UART diff --git a/Documentation/devicetree/bindings/serial/altr,juart-1.0.yaml b/Documentation/devicetree/bindings/serial/altr,juart-1.0.yaml new file mode 100644 index 000000000000..02e20fa591da --- /dev/null +++ b/Documentation/devicetree/bindings/serial/altr,juart-1.0.yaml @@ -0,0 +1,19 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/altr,juart-1.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera JTAG UART + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +properties: + compatible: + const: altr,juart-1.0 + +required: + - compatible + +additionalProperties: false diff --git a/Documentation/devicetree/bindings/serial/altr,uart-1.0.yaml b/Documentation/devicetree/bindings/serial/altr,uart-1.0.yaml new file mode 100644 index 000000000000..72d4972e1e22 --- /dev/null +++ b/Documentation/devicetree/bindings/serial/altr,uart-1.0.yaml @@ -0,0 +1,25 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/serial/altr,uart-1.0.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Altera UART + +maintainers: + - Dinh Nguyen <dinguyen@kernel.org> + +allOf: + - $ref: /schemas/serial/serial.yaml# + +properties: + compatible: + const: altr,uart-1.0 + + clock-frequency: + description: Frequency of the clock input to the UART. + +required: + - compatible + +unevaluatedProperties: false diff --git a/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml b/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml index 234089b5954d..b43df10c5ef4 100644 --- a/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml +++ b/Documentation/devicetree/bindings/soc/fsl/fsl,ls1028a-reset.yaml @@ -1,7 +1,7 @@ # SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) %YAML 1.2 --- -$id: http://devicetree.org/schemas//soc/fsl/fsl,ls1028a-reset.yaml# +$id: http://devicetree.org/schemas/soc/fsl/fsl,ls1028a-reset.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# title: Freescale Layerscape Reset Registers Module |