diff options
Diffstat (limited to 'arch/arm64/boot/dts/qcom/qcm2290.dtsi')
| -rw-r--r-- | arch/arm64/boot/dts/qcom/qcm2290.dtsi | 178 |
1 files changed, 165 insertions, 13 deletions
diff --git a/arch/arm64/boot/dts/qcom/qcm2290.dtsi b/arch/arm64/boot/dts/qcom/qcm2290.dtsi index f0746123e594..fa24b77a31a7 100644 --- a/arch/arm64/boot/dts/qcom/qcm2290.dtsi +++ b/arch/arm64/boot/dts/qcom/qcm2290.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/clock/qcom,dispcc-qcm2290.h> +#include <dt-bindings/clock/qcom,dsi-phy-28nm.h> #include <dt-bindings/clock/qcom,gcc-qcm2290.h> #include <dt-bindings/clock/qcom,qcm2290-gpucc.h> #include <dt-bindings/clock/qcom,rpmcc.h> @@ -550,6 +551,13 @@ bias-disable; }; + qup_uart3_default: qup-uart3-default-state { + pins = "gpio8", "gpio9", "gpio10", "gpio11"; + function = "qup3"; + drive-strength = <2>; + bias-disable; + }; + qup_uart4_default: qup-uart4-default-state { pins = "gpio12", "gpio13"; function = "qup4"; @@ -749,6 +757,30 @@ #interconnect-cells = <2>; }; + cryptobam: dma-controller@1b04000 { + compatible = "qcom,bam-v1.7.0"; + reg = <0x0 0x01b04000 0x0 0x24000>; + interrupts = <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "bam_clk"; + #dma-cells = <1>; + qcom,ee = <0>; + qcom,controlled-remotely; + iommus = <&apps_smmu 0x0084 0x11>, + <&apps_smmu 0x0086 0x11>; + }; + + crypto: crypto@1b3a000 { + compatible = "qcom,qcm2290-qce", "qcom,ipq4019-qce", "qcom,qce"; + reg = <0x0 0x01b3a000 0x0 0x6000>; + clocks = <&rpmcc RPM_SMD_CE1_CLK>; + clock-names = "core"; + dmas = <&cryptobam 6>, <&cryptobam 7>; + dma-names = "rx", "tx"; + iommus = <&apps_smmu 0x0084 0x11>, + <&apps_smmu 0x0086 0x11>; + }; + qfprom@1b44000 { compatible = "qcom,qcm2290-qfprom", "qcom,qfprom"; reg = <0x0 0x01b44000 0x0 0x3000>; @@ -1073,7 +1105,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1092,7 +1124,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; @@ -1137,7 +1169,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1184,7 +1216,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1231,7 +1263,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1239,6 +1271,23 @@ status = "disabled"; }; + uart3: serial@4a8c000 { + compatible = "qcom,geni-uart"; + reg = <0x0 0x04a8c000 0x0 0x4000>; + interrupts = <GIC_SPI 330 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&gcc GCC_QUPV3_WRAP0_S3_CLK>; + clock-names = "se"; + pinctrl-0 = <&qup_uart3_default>; + pinctrl-names = "default"; + interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG + &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, + <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG + &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + interconnect-names = "qup-core", + "qup-config"; + status = "disabled"; + }; + i2c4: i2c@4a90000 { compatible = "qcom,geni-i2c"; reg = <0x0 0x04a90000 0x0 0x4000>; @@ -1278,7 +1327,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1297,7 +1346,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; status = "disabled"; @@ -1342,7 +1391,7 @@ interconnects = <&qup_virt MASTER_QUP_CORE_0 RPM_ALWAYS_TAG &qup_virt SLAVE_QUP_CORE_0 RPM_ALWAYS_TAG>, <&bimc MASTER_APPSS_PROC RPM_ALWAYS_TAG - &config_noc MASTER_APPSS_PROC RPM_ALWAYS_TAG>; + &config_noc SLAVE_QUP_0 RPM_ALWAYS_TAG>; interconnect-names = "qup-core", "qup-config"; #address-cells = <1>; @@ -1579,6 +1628,109 @@ #iommu-cells = <2>; }; + camss: camss@5c6e000 { + compatible = "qcom,qcm2290-camss"; + + reg = <0x0 0x5c6e000 0x0 0x1000>, + <0x0 0x5c75000 0x0 0x1000>, + <0x0 0x5c52000 0x0 0x1000>, + <0x0 0x5c53000 0x0 0x1000>, + <0x0 0x5c66000 0x0 0x400>, + <0x0 0x5c68000 0x0 0x400>, + <0x0 0x5c11000 0x0 0x1000>, + <0x0 0x5c6f000 0x0 0x4000>, + <0x0 0x5c76000 0x0 0x4000>; + reg-names = "csid0", + "csid1", + "csiphy0", + "csiphy1", + "csitpg0", + "csitpg1", + "top", + "vfe0", + "vfe1"; + + clocks = <&gcc GCC_CAMERA_AHB_CLK>, + <&gcc GCC_CAMSS_AXI_CLK>, + <&gcc GCC_CAMSS_NRT_AXI_CLK>, + <&gcc GCC_CAMSS_RT_AXI_CLK>, + <&gcc GCC_CAMSS_TFE_0_CSID_CLK>, + <&gcc GCC_CAMSS_TFE_1_CSID_CLK>, + <&gcc GCC_CAMSS_CPHY_0_CLK>, + <&gcc GCC_CAMSS_CSI0PHYTIMER_CLK>, + <&gcc GCC_CAMSS_CPHY_1_CLK>, + <&gcc GCC_CAMSS_CSI1PHYTIMER_CLK>, + <&gcc GCC_CAMSS_TOP_AHB_CLK>, + <&gcc GCC_CAMSS_TFE_0_CLK>, + <&gcc GCC_CAMSS_TFE_0_CPHY_RX_CLK>, + <&gcc GCC_CAMSS_TFE_1_CLK>, + <&gcc GCC_CAMSS_TFE_1_CPHY_RX_CLK> ; + clock-names = "ahb", + "axi", + "camnoc_nrt_axi", + "camnoc_rt_axi", + "csi0", + "csi1", + "csiphy0", + "csiphy0_timer", + "csiphy1", + "csiphy1_timer", + "top_ahb", + "vfe0", + "vfe0_cphy_rx", + "vfe1", + "vfe1_cphy_rx"; + + interrupts = <GIC_SPI 210 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 212 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 72 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 73 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 309 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 310 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 211 IRQ_TYPE_EDGE_RISING>, + <GIC_SPI 213 IRQ_TYPE_EDGE_RISING>; + interrupt-names = "csid0", + "csid1", + "csiphy0", + "csiphy1", + "csitpg0", + "csitpg1", + "vfe0", + "vfe1"; + + interconnects = <&bimc MASTER_APPSS_PROC RPM_ACTIVE_TAG + &config_noc SLAVE_CAMERA_CFG RPM_ACTIVE_TAG>, + <&mmrt_virt MASTER_CAMNOC_HF RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>, + <&mmnrt_virt MASTER_CAMNOC_SF RPM_ALWAYS_TAG + &bimc SLAVE_EBI1 RPM_ALWAYS_TAG>; + interconnect-names = "ahb", + "hf_mnoc", + "sf_mnoc"; + + iommus = <&apps_smmu 0x400 0x0>, + <&apps_smmu 0x800 0x0>, + <&apps_smmu 0x820 0x0>, + <&apps_smmu 0x840 0x0>; + + power-domains = <&gcc GCC_CAMSS_TOP_GDSC>; + + status = "disabled"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + + port@1 { + reg = <1>; + }; + }; + }; + mdss: display-subsystem@5e00000 { compatible = "qcom,qcm2290-mdss"; reg = <0x0 0x05e00000 0x0 0x1000>; @@ -1616,7 +1768,7 @@ mdp: display-controller@5e01000 { compatible = "qcom,qcm2290-dpu"; reg = <0x0 0x05e01000 0x0 0x8f000>, - <0x0 0x05eb0000 0x0 0x2008>; + <0x0 0x05eb0000 0x0 0x3000>; reg-names = "mdp", "vbif"; @@ -1702,8 +1854,8 @@ assigned-clocks = <&dispcc DISP_CC_MDSS_BYTE0_CLK_SRC>, <&dispcc DISP_CC_MDSS_PCLK0_CLK_SRC>; - assigned-clock-parents = <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + assigned-clock-parents = <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; operating-points-v2 = <&dsi_opp_table>; power-domains = <&rpmpd QCM2290_VDDCX>; @@ -1785,8 +1937,8 @@ <&rpmcc RPM_SMD_XO_A_CLK_SRC>, <&gcc GCC_DISP_GPLL0_CLK_SRC>, <&gcc GCC_DISP_GPLL0_DIV_CLK_SRC>, - <&mdss_dsi0_phy 0>, - <&mdss_dsi0_phy 1>; + <&mdss_dsi0_phy DSI_BYTE_PLL_CLK>, + <&mdss_dsi0_phy DSI_PIXEL_PLL_CLK>; clock-names = "bi_tcxo", "bi_tcxo_ao", "gcc_disp_gpll0_clk_src", |