diff options
Diffstat (limited to 'arch/riscv/boot/dts/sophgo/cv180x.dtsi')
| -rw-r--r-- | arch/riscv/boot/dts/sophgo/cv180x.dtsi | 421 |
1 files changed, 421 insertions, 0 deletions
diff --git a/arch/riscv/boot/dts/sophgo/cv180x.dtsi b/arch/riscv/boot/dts/sophgo/cv180x.dtsi new file mode 100644 index 000000000000..ccdb45498653 --- /dev/null +++ b/arch/riscv/boot/dts/sophgo/cv180x.dtsi @@ -0,0 +1,421 @@ +// SPDX-License-Identifier: (GPL-2.0 OR MIT) +/* + * Copyright (C) 2023 Jisheng Zhang <jszhang@kernel.org> + * Copyright (C) 2023 Inochi Amaoto <inochiama@outlook.com> + */ + +#include <dt-bindings/clock/sophgo,cv1800.h> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> +#include "cv18xx-reset.h" + +/ { + #address-cells = <1>; + #size-cells = <1>; + + osc: oscillator { + compatible = "fixed-clock"; + clock-output-names = "osc_25m"; + #clock-cells = <0>; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + + rst: reset-controller@3003000 { + compatible = "sophgo,cv1800b-reset"; + reg = <0x3003000 0x1000>; + #reset-cells = <1>; + }; + + mdio: mdio-mux@3009800 { + compatible = "mdio-mux-mmioreg", "mdio-mux"; + reg = <0x3009800 0x4>; + #address-cells = <1>; + #size-cells = <0>; + mdio-parent-bus = <&gmac0_mdio>; + mux-mask = <0x80>; + status = "disabled"; + + internal_mdio: mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + internal_ephy: phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; + }; + + external_mdio: mdio@80 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x80>; + }; + }; + + gpio0: gpio@3020000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3020000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&rst RST_GPIO0>; + + porta: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(44) IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio1: gpio@3021000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3021000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&rst RST_GPIO1>; + + portb: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(45) IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio2: gpio@3022000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3022000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&rst RST_GPIO2>; + + portc: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(46) IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + gpio3: gpio@3023000 { + compatible = "snps,dw-apb-gpio"; + reg = <0x3023000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + resets = <&rst RST_GPIO3>; + + portd: gpio-controller@0 { + compatible = "snps,dw-apb-gpio-port"; + gpio-controller; + #gpio-cells = <2>; + ngpios = <32>; + reg = <0>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <SOC_PERIPHERAL_IRQ(47) IRQ_TYPE_LEVEL_HIGH>; + }; + }; + + saradc: adc@30f0000 { + compatible = "sophgo,cv1800b-saradc"; + reg = <0x030f0000 0x1000>; + clocks = <&clk CLK_SARADC>; + interrupts = <SOC_PERIPHERAL_IRQ(84) IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + + channel@0 { + reg = <0>; + }; + + channel@1 { + reg = <1>; + }; + + channel@2 { + reg = <2>; + }; + }; + + i2c0: i2c@4000000 { + compatible = "snps,designware-i2c"; + reg = <0x04000000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C0>; + clock-names = "ref", "pclk"; + interrupts = <SOC_PERIPHERAL_IRQ(33) IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_I2C0>; + status = "disabled"; + }; + + i2c1: i2c@4010000 { + compatible = "snps,designware-i2c"; + reg = <0x04010000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C1>; + clock-names = "ref", "pclk"; + interrupts = <SOC_PERIPHERAL_IRQ(34) IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_I2C1>; + status = "disabled"; + }; + + i2c2: i2c@4020000 { + compatible = "snps,designware-i2c"; + reg = <0x04020000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C2>; + clock-names = "ref", "pclk"; + interrupts = <SOC_PERIPHERAL_IRQ(35) IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_I2C2>; + status = "disabled"; + }; + + i2c3: i2c@4030000 { + compatible = "snps,designware-i2c"; + reg = <0x04030000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C3>; + clock-names = "ref", "pclk"; + interrupts = <SOC_PERIPHERAL_IRQ(36) IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_I2C3>; + status = "disabled"; + }; + + i2c4: i2c@4040000 { + compatible = "snps,designware-i2c"; + reg = <0x04040000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_I2C>, <&clk CLK_APB_I2C4>; + clock-names = "ref", "pclk"; + interrupts = <SOC_PERIPHERAL_IRQ(37) IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_I2C4>; + status = "disabled"; + }; + + gmac0: ethernet@4070000 { + compatible = "sophgo,cv1800b-dwmac", "snps,dwmac-3.70a"; + reg = <0x04070000 0x10000>; + clocks = <&clk CLK_AXI4_ETH0>, <&clk CLK_ETH0_500M>; + clock-names = "stmmaceth", "ptp_ref"; + interrupts = <SOC_PERIPHERAL_IRQ(15) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "macirq"; + phy-handle = <&internal_ephy>; + phy-mode = "internal"; + resets = <&rst RST_ETH0>; + reset-names = "stmmaceth"; + rx-fifo-depth = <8192>; + tx-fifo-depth = <8192>; + snps,multicast-filter-bins = <0>; + snps,perfect-filter-entries = <1>; + snps,aal; + snps,txpbl = <8>; + snps,rxpbl = <8>; + snps,mtl-rx-config = <&gmac0_mtl_rx_setup>; + snps,mtl-tx-config = <&gmac0_mtl_tx_setup>; + snps,axi-config = <&gmac0_stmmac_axi_setup>; + status = "disabled"; + + gmac0_mdio: mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + }; + + gmac0_mtl_rx_setup: rx-queues-config { + snps,rx-queues-to-use = <1>; + queue0 {}; + }; + + gmac0_mtl_tx_setup: tx-queues-config { + snps,tx-queues-to-use = <1>; + queue0 {}; + }; + + gmac0_stmmac_axi_setup: stmmac-axi-config { + snps,blen = <16 8 4 0 0 0 0>; + snps,rd_osr_lmt = <2>; + snps,wr_osr_lmt = <1>; + }; + }; + + uart0: serial@4140000 { + compatible = "snps,dw-apb-uart"; + reg = <0x04140000 0x100>; + interrupts = <SOC_PERIPHERAL_IRQ(28) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_UART0>, <&clk CLK_APB_UART0>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&rst RST_UART0>; + status = "disabled"; + }; + + uart1: serial@4150000 { + compatible = "snps,dw-apb-uart"; + reg = <0x04150000 0x100>; + interrupts = <SOC_PERIPHERAL_IRQ(29) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_UART1>, <&clk CLK_APB_UART1>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&rst RST_UART1>; + status = "disabled"; + }; + + uart2: serial@4160000 { + compatible = "snps,dw-apb-uart"; + reg = <0x04160000 0x100>; + interrupts = <SOC_PERIPHERAL_IRQ(30) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_UART2>, <&clk CLK_APB_UART2>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&rst RST_UART2>; + status = "disabled"; + }; + + uart3: serial@4170000 { + compatible = "snps,dw-apb-uart"; + reg = <0x04170000 0x100>; + interrupts = <SOC_PERIPHERAL_IRQ(31) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_UART3>, <&clk CLK_APB_UART3>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&rst RST_UART3>; + status = "disabled"; + }; + + spi0: spi@4180000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x04180000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI0>; + clock-names = "ssi_clk", "pclk"; + interrupts = <SOC_PERIPHERAL_IRQ(38) IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_SPI0>; + status = "disabled"; + }; + + spi1: spi@4190000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x04190000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI1>; + clock-names = "ssi_clk", "pclk"; + interrupts = <SOC_PERIPHERAL_IRQ(39) IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_SPI1>; + status = "disabled"; + }; + + spi2: spi@41a0000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x041a0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI2>; + clock-names = "ssi_clk", "pclk"; + interrupts = <SOC_PERIPHERAL_IRQ(40) IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_SPI2>; + status = "disabled"; + }; + + spi3: spi@41b0000 { + compatible = "snps,dw-apb-ssi"; + reg = <0x041b0000 0x10000>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&clk CLK_SPI>, <&clk CLK_APB_SPI3>; + clock-names = "ssi_clk", "pclk"; + interrupts = <SOC_PERIPHERAL_IRQ(41) IRQ_TYPE_LEVEL_HIGH>; + resets = <&rst RST_SPI3>; + status = "disabled"; + }; + + uart4: serial@41c0000 { + compatible = "snps,dw-apb-uart"; + reg = <0x041c0000 0x100>; + interrupts = <SOC_PERIPHERAL_IRQ(32) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_UART4>, <&clk CLK_APB_UART4>; + clock-names = "baudclk", "apb_pclk"; + reg-shift = <2>; + reg-io-width = <4>; + resets = <&rst RST_UART4>; + status = "disabled"; + }; + + sdhci0: mmc@4310000 { + compatible = "sophgo,cv1800b-dwcmshc"; + reg = <0x4310000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(20) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_AXI4_SD0>, + <&clk CLK_SD0>; + clock-names = "core", "bus"; + status = "disabled"; + }; + + sdhci1: mmc@4320000 { + compatible = "sophgo,cv1800b-dwcmshc"; + reg = <0x4320000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(22) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_AXI4_SD1>, + <&clk CLK_SD1>; + clock-names = "core", "bus"; + status = "disabled"; + }; + + dmac: dma-controller@4330000 { + compatible = "snps,axi-dma-1.01a"; + reg = <0x04330000 0x1000>; + interrupts = <SOC_PERIPHERAL_IRQ(13) IRQ_TYPE_LEVEL_HIGH>; + clocks = <&clk CLK_SDMA_AXI>, <&clk CLK_SDMA_AXI>; + clock-names = "core-clk", "cfgr-clk"; + #dma-cells = <1>; + dma-channels = <8>; + snps,block-size = <1024 1024 1024 1024 + 1024 1024 1024 1024>; + snps,priority = <0 1 2 3 4 5 6 7>; + snps,dma-masters = <2>; + snps,data-width = <2>; + status = "disabled"; + }; + + rtc@5025000 { + compatible = "sophgo,cv1800b-rtc", "syscon"; + reg = <0x5025000 0x2000>; + interrupts = <SOC_PERIPHERAL_IRQ(1) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(2) IRQ_TYPE_LEVEL_HIGH>, + <SOC_PERIPHERAL_IRQ(3) IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "alarm", "longpress", "vbat"; + clocks = <&clk CLK_RTC_25M>, + <&clk CLK_SRC_RTC_SYS_0>; + clock-names = "rtc", "mcu"; + }; + }; +}; |