diff options
Diffstat (limited to 'drivers/clk/xilinx')
| -rw-r--r-- | drivers/clk/xilinx/clk-xlnx-clock-wizard.c | 2 | ||||
| -rw-r--r-- | drivers/clk/xilinx/xlnx_vcu.c | 33 |
2 files changed, 32 insertions, 3 deletions
diff --git a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c index bbf7714480e7..0295a13a811c 100644 --- a/drivers/clk/xilinx/clk-xlnx-clock-wizard.c +++ b/drivers/clk/xilinx/clk-xlnx-clock-wizard.c @@ -669,7 +669,7 @@ static long clk_wzrd_ver_round_rate_all(struct clk_hw *hw, unsigned long rate, u32 m, d, o, div, f; int err; - err = clk_wzrd_get_divisors(hw, rate, *prate); + err = clk_wzrd_get_divisors_ver(hw, rate, *prate); if (err) return err; diff --git a/drivers/clk/xilinx/xlnx_vcu.c b/drivers/clk/xilinx/xlnx_vcu.c index 81501b48412e..1ded67bee06c 100644 --- a/drivers/clk/xilinx/xlnx_vcu.c +++ b/drivers/clk/xilinx/xlnx_vcu.c @@ -11,6 +11,7 @@ #include <linux/clk-provider.h> #include <linux/device.h> #include <linux/errno.h> +#include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/mfd/syscon.h> #include <linux/mfd/syscon/xlnx-vcu.h> @@ -51,6 +52,7 @@ * @dev: Platform device * @pll_ref: pll ref clock source * @aclk: axi clock source + * @reset_gpio: vcu reset gpio * @logicore_reg_ba: logicore reg base address * @vcu_slcr_ba: vcu_slcr Register base address * @pll: handle for the VCU PLL @@ -61,6 +63,7 @@ struct xvcu_device { struct device *dev; struct clk *pll_ref; struct clk *aclk; + struct gpio_desc *reset_gpio; struct regmap *logicore_reg_ba; void __iomem *vcu_slcr_ba; struct clk_hw *pll; @@ -587,8 +590,8 @@ static void xvcu_unregister_clock_provider(struct xvcu_device *xvcu) xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_MCU]); if (!IS_ERR_OR_NULL(hws[CLK_XVCU_ENC_CORE])) xvcu_clk_hw_unregister_leaf(hws[CLK_XVCU_ENC_CORE]); - - clk_hw_unregister_fixed_factor(xvcu->pll_post); + if (!IS_ERR_OR_NULL(xvcu->pll_post)) + clk_hw_unregister_fixed_factor(xvcu->pll_post); } /** @@ -676,6 +679,24 @@ static int xvcu_probe(struct platform_device *pdev) * Bit 0 : Gasket isolation * Bit 1 : put VCU out of reset */ + xvcu->reset_gpio = devm_gpiod_get_optional(&pdev->dev, "reset", + GPIOD_OUT_LOW); + if (IS_ERR(xvcu->reset_gpio)) { + ret = PTR_ERR(xvcu->reset_gpio); + dev_err_probe(&pdev->dev, ret, "failed to get reset gpio for vcu.\n"); + goto error_get_gpio; + } + + if (xvcu->reset_gpio) { + gpiod_set_value(xvcu->reset_gpio, 0); + /* min 2 clock cycle of vcu pll_ref, slowest freq is 33.33KHz */ + usleep_range(60, 120); + gpiod_set_value(xvcu->reset_gpio, 1); + usleep_range(60, 120); + } else { + dev_dbg(&pdev->dev, "No reset gpio info found in dts for VCU. This may result in incorrect functionality if VCU isolation is removed after initialization in designs where the VCU reset is driven by gpio.\n"); + } + regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, VCU_GASKET_VALUE); ret = xvcu_register_clock_provider(xvcu); @@ -690,6 +711,7 @@ static int xvcu_probe(struct platform_device *pdev) error_clk_provider: xvcu_unregister_clock_provider(xvcu); +error_get_gpio: clk_disable_unprepare(xvcu->aclk); return ret; } @@ -711,6 +733,13 @@ static void xvcu_remove(struct platform_device *pdev) xvcu_unregister_clock_provider(xvcu); /* Add the Gasket isolation and put the VCU in reset. */ + if (xvcu->reset_gpio) { + gpiod_set_value(xvcu->reset_gpio, 0); + /* min 2 clock cycle of vcu pll_ref, slowest freq is 33.33KHz */ + usleep_range(60, 120); + gpiod_set_value(xvcu->reset_gpio, 1); + usleep_range(60, 120); + } regmap_write(xvcu->logicore_reg_ba, VCU_GASKET_INIT, 0); clk_disable_unprepare(xvcu->aclk); |