diff options
Diffstat (limited to 'drivers/gpu/drm/bridge/analogix')
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix-anx6345.c | 41 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c | 42 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c | 2 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix_dp_core.c | 253 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix_dp_core.h | 6 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c | 52 | ||||
| -rw-r--r-- | drivers/gpu/drm/bridge/analogix/anx7625.c | 56 |
7 files changed, 180 insertions, 272 deletions
diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c index 83d711ee3a2e..f3fe47b12edc 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx6345.c @@ -143,35 +143,7 @@ static int anx6345_dp_link_training(struct anx6345 *anx6345) if (err) return err; - /* - * Power up the sink (DP_SET_POWER register is only available on DPCD - * v1.1 and later). - */ - if (anx6345->dpcd[DP_DPCD_REV] >= 0x11) { - err = drm_dp_dpcd_readb(&anx6345->aux, DP_SET_POWER, &dpcd[0]); - if (err < 0) { - DRM_ERROR("Failed to read DP_SET_POWER register: %d\n", - err); - return err; - } - - dpcd[0] &= ~DP_SET_POWER_MASK; - dpcd[0] |= DP_SET_POWER_D0; - - err = drm_dp_dpcd_writeb(&anx6345->aux, DP_SET_POWER, dpcd[0]); - if (err < 0) { - DRM_ERROR("Failed to power up DisplayPort link: %d\n", - err); - return err; - } - - /* - * According to the DP 1.1 specification, a "Sink Device must - * exit the power saving state within 1 ms" (Section 2.5.3.1, - * Table 5-52, "Sink Control Field" (register 0x600). - */ - usleep_range(1000, 2000); - } + drm_dp_link_power_up(&anx6345->aux, anx6345->dpcd[DP_DPCD_REV]); /* Possibly enable downspread on the sink */ err = regmap_write(anx6345->map[I2C_IDX_DPTX], @@ -517,6 +489,7 @@ static const struct drm_connector_funcs anx6345_connector_funcs = { }; static int anx6345_bridge_attach(struct drm_bridge *bridge, + struct drm_encoder *encoder, enum drm_bridge_attach_flags flags) { struct anx6345 *anx6345 = bridge_to_anx6345(bridge); @@ -553,7 +526,7 @@ static int anx6345_bridge_attach(struct drm_bridge *bridge, anx6345->connector.polled = DRM_CONNECTOR_POLL_HPD; err = drm_connector_attach_encoder(&anx6345->connector, - bridge->encoder); + encoder); if (err) { DRM_ERROR("Failed to link up connector to encoder: %d\n", err); goto connector_cleanup; @@ -691,9 +664,10 @@ static int anx6345_i2c_probe(struct i2c_client *client) struct device *dev; int i, err; - anx6345 = devm_kzalloc(&client->dev, sizeof(*anx6345), GFP_KERNEL); - if (!anx6345) - return -ENOMEM; + anx6345 = devm_drm_bridge_alloc(&client->dev, struct anx6345, bridge, + &anx6345_bridge_funcs); + if (IS_ERR(anx6345)) + return PTR_ERR(anx6345); mutex_init(&anx6345->lock); @@ -765,7 +739,6 @@ static int anx6345_i2c_probe(struct i2c_client *client) /* Look for supported chip ID */ anx6345_poweron(anx6345); if (anx6345_get_chip_id(anx6345)) { - anx6345->bridge.funcs = &anx6345_bridge_funcs; drm_bridge_add(&anx6345->bridge); return 0; diff --git a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c index f74694bb9c50..ba0fc149a9e7 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c +++ b/drivers/gpu/drm/bridge/analogix/analogix-anx78xx.c @@ -656,35 +656,7 @@ static int anx78xx_dp_link_training(struct anx78xx *anx78xx) if (err) return err; - /* - * Power up the sink (DP_SET_POWER register is only available on DPCD - * v1.1 and later). - */ - if (anx78xx->dpcd[DP_DPCD_REV] >= 0x11) { - err = drm_dp_dpcd_readb(&anx78xx->aux, DP_SET_POWER, &dpcd[0]); - if (err < 0) { - DRM_ERROR("Failed to read DP_SET_POWER register: %d\n", - err); - return err; - } - - dpcd[0] &= ~DP_SET_POWER_MASK; - dpcd[0] |= DP_SET_POWER_D0; - - err = drm_dp_dpcd_writeb(&anx78xx->aux, DP_SET_POWER, dpcd[0]); - if (err < 0) { - DRM_ERROR("Failed to power up DisplayPort link: %d\n", - err); - return err; - } - - /* - * According to the DP 1.1 specification, a "Sink Device must - * exit the power saving state within 1 ms" (Section 2.5.3.1, - * Table 5-52, "Sink Control Field" (register 0x600). - */ - usleep_range(1000, 2000); - } + drm_dp_link_power_up(&anx78xx->aux, anx78xx->dpcd[DP_DPCD_REV]); /* Possibly enable downspread on the sink */ err = regmap_write(anx78xx->map[I2C_IDX_TX_P0], @@ -888,6 +860,7 @@ static const struct drm_connector_funcs anx78xx_connector_funcs = { }; static int anx78xx_bridge_attach(struct drm_bridge *bridge, + struct drm_encoder *encoder, enum drm_bridge_attach_flags flags) { struct anx78xx *anx78xx = bridge_to_anx78xx(bridge); @@ -924,7 +897,7 @@ static int anx78xx_bridge_attach(struct drm_bridge *bridge, anx78xx->connector.polled = DRM_CONNECTOR_POLL_HPD; err = drm_connector_attach_encoder(&anx78xx->connector, - bridge->encoder); + encoder); if (err) { DRM_ERROR("Failed to link up connector to encoder: %d\n", err); goto connector_cleanup; @@ -1220,9 +1193,10 @@ static int anx78xx_i2c_probe(struct i2c_client *client) bool found = false; int err; - anx78xx = devm_kzalloc(&client->dev, sizeof(*anx78xx), GFP_KERNEL); - if (!anx78xx) - return -ENOMEM; + anx78xx = devm_drm_bridge_alloc(&client->dev, struct anx78xx, bridge, + &anx78xx_bridge_funcs); + if (IS_ERR(anx78xx)) + return PTR_ERR(anx78xx); pdata = &anx78xx->pdata; @@ -1333,8 +1307,6 @@ static int anx78xx_i2c_probe(struct i2c_client *client) goto err_poweroff; } - anx78xx->bridge.funcs = &anx78xx_bridge_funcs; - drm_bridge_add(&anx78xx->bridge); /* If cable is pulled out, just poweroff and wait for HPD event */ diff --git a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c index b1e482994ffe..e8662168717d 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c +++ b/drivers/gpu/drm/bridge/analogix/analogix-i2c-dptx.c @@ -5,6 +5,8 @@ * Based on anx7808 driver obtained from chromeos with copyright: * Copyright(c) 2013, Google Inc. */ + +#include <linux/export.h> #include <linux/regmap.h> #include <drm/display/drm_dp_helper.h> diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c index 071168aa0c3b..ed35e567d117 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.c @@ -9,6 +9,7 @@ #include <linux/clk.h> #include <linux/component.h> #include <linux/err.h> +#include <linux/export.h> #include <linux/gpio/consumer.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -838,10 +839,7 @@ static int analogix_dp_commit(struct analogix_dp_device *dp) int ret; /* Keep the panel disabled while we configure video */ - if (dp->plat_data->panel) { - if (drm_panel_disable(dp->plat_data->panel)) - DRM_ERROR("failed to disable the panel\n"); - } + drm_panel_disable(dp->plat_data->panel); ret = analogix_dp_train_link(dp); if (ret) { @@ -863,13 +861,7 @@ static int analogix_dp_commit(struct analogix_dp_device *dp) } /* Safe to enable the panel now */ - if (dp->plat_data->panel) { - ret = drm_panel_enable(dp->plat_data->panel); - if (ret) { - DRM_ERROR("failed to enable the panel\n"); - return ret; - } - } + drm_panel_enable(dp->plat_data->panel); /* Check whether panel supports fast training */ ret = analogix_dp_fast_link_train_detection(dp); @@ -955,67 +947,15 @@ static int analogix_dp_disable_psr(struct analogix_dp_device *dp) return analogix_dp_send_psr_spd(dp, &psr_vsc, true); } -/* - * This function is a bit of a catch-all for panel preparation, hopefully - * simplifying the logic of functions that need to prepare/unprepare the panel - * below. - * - * If @prepare is true, this function will prepare the panel. Conversely, if it - * is false, the panel will be unprepared. - * - * If @is_modeset_prepare is true, the function will disregard the current state - * of the panel and either prepare/unprepare the panel based on @prepare. Once - * it finishes, it will update dp->panel_is_modeset to reflect the current state - * of the panel. - */ -static int analogix_dp_prepare_panel(struct analogix_dp_device *dp, - bool prepare, bool is_modeset_prepare) -{ - int ret = 0; - - if (!dp->plat_data->panel) - return 0; - - mutex_lock(&dp->panel_lock); - - /* - * Exit early if this is a temporary prepare/unprepare and we're already - * modeset (since we neither want to prepare twice or unprepare early). - */ - if (dp->panel_is_modeset && !is_modeset_prepare) - goto out; - - if (prepare) - ret = drm_panel_prepare(dp->plat_data->panel); - else - ret = drm_panel_unprepare(dp->plat_data->panel); - - if (ret) - goto out; - - if (is_modeset_prepare) - dp->panel_is_modeset = prepare; - -out: - mutex_unlock(&dp->panel_lock); - return ret; -} - static int analogix_dp_get_modes(struct drm_connector *connector) { struct analogix_dp_device *dp = to_dp(connector); const struct drm_edid *drm_edid; - int ret, num_modes = 0; + int num_modes = 0; if (dp->plat_data->panel) { num_modes += drm_panel_get_modes(dp->plat_data->panel, connector); } else { - ret = analogix_dp_prepare_panel(dp, true, false); - if (ret) { - DRM_ERROR("Failed to prepare panel (%d)\n", ret); - return 0; - } - drm_edid = drm_edid_read_ddc(connector, &dp->aux.ddc); drm_edid_connector_update(&dp->connector, drm_edid); @@ -1024,10 +964,6 @@ static int analogix_dp_get_modes(struct drm_connector *connector) num_modes += drm_edid_connector_add_modes(&dp->connector); drm_edid_free(drm_edid); } - - ret = analogix_dp_prepare_panel(dp, false, false); - if (ret) - DRM_ERROR("Failed to unprepare panel (%d)\n", ret); } if (dp->plat_data->get_modes) @@ -1082,24 +1018,13 @@ analogix_dp_detect(struct drm_connector *connector, bool force) { struct analogix_dp_device *dp = to_dp(connector); enum drm_connector_status status = connector_status_disconnected; - int ret; if (dp->plat_data->panel) return connector_status_connected; - ret = analogix_dp_prepare_panel(dp, true, false); - if (ret) { - DRM_ERROR("Failed to prepare panel (%d)\n", ret); - return connector_status_disconnected; - } - if (!analogix_dp_detect_hpd(dp)) status = connector_status_connected; - ret = analogix_dp_prepare_panel(dp, false, false); - if (ret) - DRM_ERROR("Failed to unprepare panel (%d)\n", ret); - return status; } @@ -1113,10 +1038,10 @@ static const struct drm_connector_funcs analogix_dp_connector_funcs = { }; static int analogix_dp_bridge_attach(struct drm_bridge *bridge, + struct drm_encoder *encoder, enum drm_bridge_attach_flags flags) { - struct analogix_dp_device *dp = bridge->driver_private; - struct drm_encoder *encoder = dp->encoder; + struct analogix_dp_device *dp = to_dp(bridge); struct drm_connector *connector = NULL; int ret = 0; @@ -1200,10 +1125,9 @@ struct drm_crtc *analogix_dp_get_new_crtc(struct analogix_dp_device *dp, static void analogix_dp_bridge_atomic_pre_enable(struct drm_bridge *bridge, struct drm_atomic_state *old_state) { - struct analogix_dp_device *dp = bridge->driver_private; + struct analogix_dp_device *dp = to_dp(bridge); struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state; - int ret; crtc = analogix_dp_get_new_crtc(dp, old_state); if (!crtc) @@ -1214,9 +1138,7 @@ static void analogix_dp_bridge_atomic_pre_enable(struct drm_bridge *bridge, if (old_crtc_state && old_crtc_state->self_refresh_active) return; - ret = analogix_dp_prepare_panel(dp, true, true); - if (ret) - DRM_ERROR("failed to setup the panel ret = %d\n", ret); + drm_panel_prepare(dp->plat_data->panel); } static int analogix_dp_set_bridge(struct analogix_dp_device *dp) @@ -1258,7 +1180,7 @@ out_dp_init: static void analogix_dp_bridge_atomic_enable(struct drm_bridge *bridge, struct drm_atomic_state *old_state) { - struct analogix_dp_device *dp = bridge->driver_private; + struct analogix_dp_device *dp = to_dp(bridge); struct drm_crtc *crtc; struct drm_crtc_state *old_crtc_state; int timeout_loop = 0; @@ -1295,18 +1217,12 @@ static void analogix_dp_bridge_atomic_enable(struct drm_bridge *bridge, static void analogix_dp_bridge_disable(struct drm_bridge *bridge) { - struct analogix_dp_device *dp = bridge->driver_private; - int ret; + struct analogix_dp_device *dp = to_dp(bridge); if (dp->dpms_mode != DRM_MODE_DPMS_ON) return; - if (dp->plat_data->panel) { - if (drm_panel_disable(dp->plat_data->panel)) { - DRM_ERROR("failed to disable the panel\n"); - return; - } - } + drm_panel_disable(dp->plat_data->panel); disable_irq(dp->irq); @@ -1314,9 +1230,7 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge) pm_runtime_put_sync(dp->dev); - ret = analogix_dp_prepare_panel(dp, false, true); - if (ret) - DRM_ERROR("failed to setup the panel ret = %d\n", ret); + drm_panel_unprepare(dp->plat_data->panel); dp->fast_train_enable = false; dp->psr_supported = false; @@ -1326,7 +1240,7 @@ static void analogix_dp_bridge_disable(struct drm_bridge *bridge) static void analogix_dp_bridge_atomic_disable(struct drm_bridge *bridge, struct drm_atomic_state *old_state) { - struct analogix_dp_device *dp = bridge->driver_private; + struct analogix_dp_device *dp = to_dp(bridge); struct drm_crtc *old_crtc, *new_crtc; struct drm_crtc_state *old_crtc_state = NULL; struct drm_crtc_state *new_crtc_state = NULL; @@ -1364,7 +1278,7 @@ out: static void analogix_dp_bridge_atomic_post_disable(struct drm_bridge *bridge, struct drm_atomic_state *old_state) { - struct analogix_dp_device *dp = bridge->driver_private; + struct analogix_dp_device *dp = to_dp(bridge); struct drm_crtc *crtc; struct drm_crtc_state *new_crtc_state; int ret; @@ -1386,7 +1300,7 @@ static void analogix_dp_bridge_mode_set(struct drm_bridge *bridge, const struct drm_display_mode *orig_mode, const struct drm_display_mode *mode) { - struct analogix_dp_device *dp = bridge->driver_private; + struct analogix_dp_device *dp = to_dp(bridge); struct drm_display_info *display_info = &dp->connector.display_info; struct video_info *video = &dp->video_info; struct device_node *dp_node = dp->dev->of_node; @@ -1471,25 +1385,6 @@ static const struct drm_bridge_funcs analogix_dp_bridge_funcs = { .attach = analogix_dp_bridge_attach, }; -static int analogix_dp_create_bridge(struct drm_device *drm_dev, - struct analogix_dp_device *dp) -{ - struct drm_bridge *bridge; - - bridge = devm_kzalloc(drm_dev->dev, sizeof(*bridge), GFP_KERNEL); - if (!bridge) { - DRM_ERROR("failed to allocate for drm bridge\n"); - return -ENOMEM; - } - - dp->bridge = bridge; - - bridge->driver_private = dp; - bridge->funcs = &analogix_dp_bridge_funcs; - - return drm_bridge_attach(dp->encoder, bridge, NULL, 0); -} - static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp) { struct device_node *dp_node = dp->dev->of_node; @@ -1505,6 +1400,10 @@ static int analogix_dp_dt_parse_pdata(struct analogix_dp_device *dp) video_info->max_link_rate = 0x0A; video_info->max_lane_count = 0x04; break; + case RK3588_EDP: + video_info->max_link_rate = 0x14; + video_info->max_lane_count = 0x04; + break; case EXYNOS_DP: /* * NOTE: those property parseing code is used for @@ -1540,6 +1439,26 @@ out: return ret; } +static int analogix_dpaux_wait_hpd_asserted(struct drm_dp_aux *aux, unsigned long wait_us) +{ + struct analogix_dp_device *dp = to_dp(aux); + int val; + int ret; + + if (dp->force_hpd) + return 0; + + pm_runtime_get_sync(dp->dev); + + ret = readx_poll_timeout(analogix_dp_get_plug_in_status, dp, val, !val, + wait_us / 100, wait_us); + + pm_runtime_mark_last_busy(dp->dev); + pm_runtime_put_autosuspend(dp->dev); + + return ret; +} + struct analogix_dp_device * analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data) { @@ -1553,16 +1472,14 @@ analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data) return ERR_PTR(-EINVAL); } - dp = devm_kzalloc(dev, sizeof(struct analogix_dp_device), GFP_KERNEL); + dp = devm_drm_bridge_alloc(dev, struct analogix_dp_device, bridge, + &analogix_dp_bridge_funcs); if (!dp) return ERR_PTR(-ENOMEM); dp->dev = &pdev->dev; dp->dpms_mode = DRM_MODE_DPMS_OFF; - mutex_init(&dp->panel_lock); - dp->panel_is_modeset = false; - /* * platform dp driver need containor_of the plat_data to get * the driver private data, so we need to store the point of @@ -1597,10 +1514,8 @@ analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data) } dp->reg_base = devm_platform_ioremap_resource(pdev, 0); - if (IS_ERR(dp->reg_base)) { - ret = PTR_ERR(dp->reg_base); - goto err_disable_clk; - } + if (IS_ERR(dp->reg_base)) + return ERR_CAST(dp->reg_base); dp->force_hpd = of_property_read_bool(dev->of_node, "force-hpd"); @@ -1612,8 +1527,7 @@ analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data) if (IS_ERR(dp->hpd_gpiod)) { dev_err(dev, "error getting HDP GPIO: %ld\n", PTR_ERR(dp->hpd_gpiod)); - ret = PTR_ERR(dp->hpd_gpiod); - goto err_disable_clk; + return ERR_CAST(dp->hpd_gpiod); } if (dp->hpd_gpiod) { @@ -1625,16 +1539,15 @@ analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data) * that we can get the current state of the GPIO. */ dp->irq = gpiod_to_irq(dp->hpd_gpiod); - irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING; + irq_flags = IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING | IRQF_NO_AUTOEN; } else { dp->irq = platform_get_irq(pdev, 0); - irq_flags = 0; + irq_flags = IRQF_NO_AUTOEN; } if (dp->irq == -ENXIO) { dev_err(&pdev->dev, "failed to get irq\n"); - ret = -ENODEV; - goto err_disable_clk; + return ERR_PTR(-ENODEV); } ret = devm_request_threaded_irq(&pdev->dev, dp->irq, @@ -1643,15 +1556,22 @@ analogix_dp_probe(struct device *dev, struct analogix_dp_plat_data *plat_data) irq_flags, "analogix-dp", dp); if (ret) { dev_err(&pdev->dev, "failed to request irq\n"); - goto err_disable_clk; + return ERR_PTR(ret); } - disable_irq(dp->irq); - return dp; + dp->aux.name = "DP-AUX"; + dp->aux.transfer = analogix_dpaux_transfer; + dp->aux.wait_hpd_asserted = analogix_dpaux_wait_hpd_asserted; + dp->aux.dev = dp->dev; + drm_dp_aux_init(&dp->aux); -err_disable_clk: - clk_disable_unprepare(dp->clock); - return ERR_PTR(ret); + pm_runtime_use_autosuspend(dp->dev); + pm_runtime_set_autosuspend_delay(dp->dev, 100); + ret = devm_pm_runtime_enable(dp->dev); + if (ret) + return ERR_PTR(ret); + + return dp; } EXPORT_SYMBOL_GPL(analogix_dp_probe); @@ -1681,6 +1601,7 @@ int analogix_dp_resume(struct analogix_dp_device *dp) if (dp->plat_data->power_on) dp->plat_data->power_on(dp->plat_data); + phy_set_mode(dp->phy, PHY_MODE_DP); phy_power_on(dp->phy); analogix_dp_init_dp(dp); @@ -1696,28 +1617,15 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev) dp->drm_dev = drm_dev; dp->encoder = dp->plat_data->encoder; - if (IS_ENABLED(CONFIG_PM)) { - pm_runtime_use_autosuspend(dp->dev); - pm_runtime_set_autosuspend_delay(dp->dev, 100); - pm_runtime_enable(dp->dev); - } else { - ret = analogix_dp_resume(dp); - if (ret) - return ret; - } - - dp->aux.name = "DP-AUX"; - dp->aux.transfer = analogix_dpaux_transfer; - dp->aux.dev = dp->dev; dp->aux.drm_dev = drm_dev; ret = drm_dp_aux_register(&dp->aux); if (ret) { DRM_ERROR("failed to register AUX (%d)\n", ret); - goto err_disable_pm_runtime; + return ret; } - ret = analogix_dp_create_bridge(drm_dev, dp); + ret = drm_bridge_attach(dp->encoder, &dp->bridge, NULL, 0); if (ret) { DRM_ERROR("failed to create bridge (%d)\n", ret); goto err_unregister_aux; @@ -1727,13 +1635,6 @@ int analogix_dp_bind(struct analogix_dp_device *dp, struct drm_device *drm_dev) err_unregister_aux: drm_dp_aux_unregister(&dp->aux); -err_disable_pm_runtime: - if (IS_ENABLED(CONFIG_PM)) { - pm_runtime_dont_use_autosuspend(dp->dev); - pm_runtime_disable(dp->dev); - } else { - analogix_dp_suspend(dp); - } return ret; } @@ -1741,22 +1642,12 @@ EXPORT_SYMBOL_GPL(analogix_dp_bind); void analogix_dp_unbind(struct analogix_dp_device *dp) { - analogix_dp_bridge_disable(dp->bridge); + analogix_dp_bridge_disable(&dp->bridge); dp->connector.funcs->destroy(&dp->connector); - if (dp->plat_data->panel) { - if (drm_panel_unprepare(dp->plat_data->panel)) - DRM_ERROR("failed to turnoff the panel\n"); - } + drm_panel_unprepare(dp->plat_data->panel); drm_dp_aux_unregister(&dp->aux); - - if (IS_ENABLED(CONFIG_PM)) { - pm_runtime_dont_use_autosuspend(dp->dev); - pm_runtime_disable(dp->dev); - } else { - analogix_dp_suspend(dp); - } } EXPORT_SYMBOL_GPL(analogix_dp_unbind); @@ -1782,6 +1673,20 @@ int analogix_dp_stop_crc(struct drm_connector *connector) } EXPORT_SYMBOL_GPL(analogix_dp_stop_crc); +struct analogix_dp_plat_data *analogix_dp_aux_to_plat_data(struct drm_dp_aux *aux) +{ + struct analogix_dp_device *dp = to_dp(aux); + + return dp->plat_data; +} +EXPORT_SYMBOL_GPL(analogix_dp_aux_to_plat_data); + +struct drm_dp_aux *analogix_dp_get_aux(struct analogix_dp_device *dp) +{ + return &dp->aux; +} +EXPORT_SYMBOL_GPL(analogix_dp_get_aux); + MODULE_AUTHOR("Jingoo Han <jg1.han@samsung.com>"); MODULE_DESCRIPTION("Analogix DP Core Driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h index 774d11574b09..b86e93f30ed6 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_core.h @@ -11,6 +11,7 @@ #include <drm/display/drm_dp_helper.h> #include <drm/drm_crtc.h> +#include <drm/drm_bridge.h> #define DP_TIMEOUT_LOOP_COUNT 100 #define MAX_CR_LOOP 5 @@ -154,7 +155,7 @@ struct analogix_dp_device { struct device *dev; struct drm_device *drm_dev; struct drm_connector connector; - struct drm_bridge *bridge; + struct drm_bridge bridge; struct drm_dp_aux aux; struct clk *clock; unsigned int irq; @@ -169,9 +170,6 @@ struct analogix_dp_device { bool fast_train_enable; bool psr_supported; - struct mutex panel_lock; - bool panel_is_modeset; - struct analogix_dp_plat_data *plat_data; }; diff --git a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c index 3afc73c858c4..38fd8d5014d2 100644 --- a/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c +++ b/drivers/gpu/drm/bridge/analogix/analogix_dp_reg.c @@ -11,6 +11,7 @@ #include <linux/gpio/consumer.h> #include <linux/io.h> #include <linux/iopoll.h> +#include <linux/phy/phy.h> #include <drm/bridge/analogix_dp.h> @@ -513,10 +514,24 @@ void analogix_dp_enable_sw_function(struct analogix_dp_device *dp) void analogix_dp_set_link_bandwidth(struct analogix_dp_device *dp, u32 bwtype) { u32 reg; + int ret; reg = bwtype; if ((bwtype == DP_LINK_BW_2_7) || (bwtype == DP_LINK_BW_1_62)) writel(reg, dp->reg_base + ANALOGIX_DP_LINK_BW_SET); + + if (dp->phy) { + union phy_configure_opts phy_cfg = {0}; + + phy_cfg.dp.link_rate = + drm_dp_bw_code_to_link_rate(dp->link_train.link_rate) / 100; + phy_cfg.dp.set_rate = true; + ret = phy_configure(dp->phy, &phy_cfg); + if (ret && ret != -EOPNOTSUPP) { + dev_err(dp->dev, "%s: phy_configure() failed: %d\n", __func__, ret); + return; + } + } } void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype) @@ -530,9 +545,22 @@ void analogix_dp_get_link_bandwidth(struct analogix_dp_device *dp, u32 *bwtype) void analogix_dp_set_lane_count(struct analogix_dp_device *dp, u32 count) { u32 reg; + int ret; reg = count; writel(reg, dp->reg_base + ANALOGIX_DP_LANE_COUNT_SET); + + if (dp->phy) { + union phy_configure_opts phy_cfg = {0}; + + phy_cfg.dp.lanes = dp->link_train.lane_count; + phy_cfg.dp.set_lanes = true; + ret = phy_configure(dp->phy, &phy_cfg); + if (ret && ret != -EOPNOTSUPP) { + dev_err(dp->dev, "%s: phy_configure() failed: %d\n", __func__, ret); + return; + } + } } void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count) @@ -546,10 +574,34 @@ void analogix_dp_get_lane_count(struct analogix_dp_device *dp, u32 *count) void analogix_dp_set_lane_link_training(struct analogix_dp_device *dp) { u8 lane; + int ret; for (lane = 0; lane < dp->link_train.lane_count; lane++) writel(dp->link_train.training_lane[lane], dp->reg_base + ANALOGIX_DP_LN0_LINK_TRAINING_CTL + 4 * lane); + + if (dp->phy) { + union phy_configure_opts phy_cfg = {0}; + + for (lane = 0; lane < dp->link_train.lane_count; lane++) { + u8 training_lane = dp->link_train.training_lane[lane]; + u8 vs, pe; + + vs = (training_lane & DP_TRAIN_VOLTAGE_SWING_MASK) >> + DP_TRAIN_VOLTAGE_SWING_SHIFT; + pe = (training_lane & DP_TRAIN_PRE_EMPHASIS_MASK) >> + DP_TRAIN_PRE_EMPHASIS_SHIFT; + phy_cfg.dp.voltage[lane] = vs; + phy_cfg.dp.pre[lane] = pe; + } + + phy_cfg.dp.set_voltages = true; + ret = phy_configure(dp->phy, &phy_cfg); + if (ret && ret != -EOPNOTSUPP) { + dev_err(dp->dev, "%s: phy_configure() failed: %d\n", __func__, ret); + return; + } + } } u32 analogix_dp_get_lane_link_training(struct analogix_dp_device *dp, u8 lane) diff --git a/drivers/gpu/drm/bridge/analogix/anx7625.c b/drivers/gpu/drm/bridge/analogix/anx7625.c index 0b97b66de577..c0ad8f59e483 100644 --- a/drivers/gpu/drm/bridge/analogix/anx7625.c +++ b/drivers/gpu/drm/bridge/analogix/anx7625.c @@ -1257,10 +1257,10 @@ static void anx7625_power_on(struct anx7625_data *ctx) usleep_range(11000, 12000); /* Power on pin enable */ - gpiod_set_value(ctx->pdata.gpio_p_on, 1); + gpiod_set_value_cansleep(ctx->pdata.gpio_p_on, 1); usleep_range(10000, 11000); /* Power reset pin enable */ - gpiod_set_value(ctx->pdata.gpio_reset, 1); + gpiod_set_value_cansleep(ctx->pdata.gpio_reset, 1); usleep_range(10000, 11000); DRM_DEV_DEBUG_DRIVER(dev, "power on !\n"); @@ -1280,9 +1280,9 @@ static void anx7625_power_standby(struct anx7625_data *ctx) return; } - gpiod_set_value(ctx->pdata.gpio_reset, 0); + gpiod_set_value_cansleep(ctx->pdata.gpio_reset, 0); usleep_range(1000, 1100); - gpiod_set_value(ctx->pdata.gpio_p_on, 0); + gpiod_set_value_cansleep(ctx->pdata.gpio_p_on, 0); usleep_range(1000, 1100); ret = regulator_bulk_disable(ARRAY_SIZE(ctx->pdata.supplies), @@ -1814,9 +1814,6 @@ static enum drm_connector_status anx7625_sink_detect(struct anx7625_data *ctx) DRM_DEV_DEBUG_DRIVER(dev, "sink detect\n"); - if (ctx->pdata.panel_bridge) - return connector_status_connected; - return ctx->hpd_status ? connector_status_connected : connector_status_disconnected; } @@ -2141,6 +2138,7 @@ static void hdcp_check_work_func(struct work_struct *work) } static int anx7625_bridge_attach(struct drm_bridge *bridge, + struct drm_encoder *encoder, enum drm_bridge_attach_flags flags) { struct anx7625_data *ctx = bridge_to_anx7625(bridge); @@ -2159,7 +2157,7 @@ static int anx7625_bridge_attach(struct drm_bridge *bridge, } if (ctx->pdata.panel_bridge) { - err = drm_bridge_attach(bridge->encoder, + err = drm_bridge_attach(encoder, ctx->pdata.panel_bridge, &ctx->bridge, flags); if (err) @@ -2450,7 +2448,7 @@ anx7625_audio_update_connector_status(struct anx7625_data *ctx, enum drm_connector_status status); static enum drm_connector_status -anx7625_bridge_detect(struct drm_bridge *bridge) +anx7625_bridge_detect(struct drm_bridge *bridge, struct drm_connector *connector) { struct anx7625_data *ctx = bridge_to_anx7625(bridge); struct device *dev = ctx->dev; @@ -2474,6 +2472,22 @@ static const struct drm_edid *anx7625_bridge_edid_read(struct drm_bridge *bridge return anx7625_edid_read(ctx); } +static void anx7625_bridge_hpd_enable(struct drm_bridge *bridge) +{ + struct anx7625_data *ctx = bridge_to_anx7625(bridge); + struct device *dev = ctx->dev; + + pm_runtime_get_sync(dev); +} + +static void anx7625_bridge_hpd_disable(struct drm_bridge *bridge) +{ + struct anx7625_data *ctx = bridge_to_anx7625(bridge); + struct device *dev = ctx->dev; + + pm_runtime_put_sync(dev); +} + static const struct drm_bridge_funcs anx7625_bridge_funcs = { .attach = anx7625_bridge_attach, .detach = anx7625_bridge_detach, @@ -2487,6 +2501,8 @@ static const struct drm_bridge_funcs anx7625_bridge_funcs = { .atomic_reset = drm_atomic_helper_bridge_reset, .detect = anx7625_bridge_detect, .edid_read = anx7625_bridge_edid_read, + .hpd_enable = anx7625_bridge_hpd_enable, + .hpd_disable = anx7625_bridge_hpd_disable, }; static int anx7625_register_i2c_dummy_clients(struct anx7625_data *ctx, @@ -2568,12 +2584,6 @@ static const struct dev_pm_ops anx7625_pm_ops = { anx7625_runtime_pm_resume, NULL) }; -static void anx7625_runtime_disable(void *data) -{ - pm_runtime_dont_use_autosuspend(data); - pm_runtime_disable(data); -} - static int anx7625_link_bridge(struct drm_dp_aux *aux) { struct anx7625_data *platform = container_of(aux, struct anx7625_data, aux); @@ -2586,13 +2596,11 @@ static int anx7625_link_bridge(struct drm_dp_aux *aux) return ret; } - platform->bridge.funcs = &anx7625_bridge_funcs; platform->bridge.of_node = dev->of_node; if (!anx7625_of_panel_on_aux_bus(dev)) platform->bridge.ops |= DRM_BRIDGE_OP_EDID; - if (!platform->pdata.panel_bridge) - platform->bridge.ops |= DRM_BRIDGE_OP_HPD | - DRM_BRIDGE_OP_DETECT; + if (!platform->pdata.panel_bridge || !anx7625_of_panel_on_aux_bus(dev)) + platform->bridge.ops |= DRM_BRIDGE_OP_HPD | DRM_BRIDGE_OP_DETECT; platform->bridge.type = platform->pdata.panel_bridge ? DRM_MODE_CONNECTOR_eDP : DRM_MODE_CONNECTOR_DisplayPort; @@ -2621,10 +2629,10 @@ static int anx7625_i2c_probe(struct i2c_client *client) return -ENODEV; } - platform = devm_kzalloc(dev, sizeof(*platform), GFP_KERNEL); - if (!platform) { + platform = devm_drm_bridge_alloc(dev, struct anx7625_data, bridge, &anx7625_bridge_funcs); + if (IS_ERR(platform)) { DRM_DEV_ERROR(dev, "fail to allocate driver data\n"); - return -ENOMEM; + return PTR_ERR(platform); } pdata = &platform->pdata; @@ -2707,11 +2715,10 @@ static int anx7625_i2c_probe(struct i2c_client *client) goto free_wq; } - pm_runtime_enable(dev); pm_runtime_set_autosuspend_delay(dev, 1000); pm_runtime_use_autosuspend(dev); pm_suspend_ignore_children(dev, true); - ret = devm_add_action_or_reset(dev, anx7625_runtime_disable, dev); + ret = devm_pm_runtime_enable(dev); if (ret) goto free_wq; @@ -2771,7 +2778,6 @@ static void anx7625_i2c_remove(struct i2c_client *client) if (platform->hdcp_workqueue) { cancel_delayed_work(&platform->hdcp_work); - flush_workqueue(platform->hdcp_workqueue); destroy_workqueue(platform->hdcp_workqueue); } |