diff options
Diffstat (limited to 'drivers/media/i2c')
29 files changed, 566 insertions, 400 deletions
diff --git a/drivers/media/i2c/Kconfig b/drivers/media/i2c/Kconfig index e68202954a8f..6237fe804a5c 100644 --- a/drivers/media/i2c/Kconfig +++ b/drivers/media/i2c/Kconfig @@ -141,6 +141,7 @@ config VIDEO_IMX214 depends on GPIOLIB select REGMAP_I2C select V4L2_CCI_I2C + select VIDEO_CCS_PLL help This is a Video4Linux2 sensor driver for the Sony IMX214 camera. @@ -765,24 +766,25 @@ config VIDEO_THP7312 endmenu -menu "Lens drivers" - visible if MEDIA_CAMERA_SUPPORT +menuconfig VIDEO_CAMERA_LENS + bool "Lens drivers" + depends on MEDIA_CAMERA_SUPPORT && I2C + select MEDIA_CONTROLLER + select V4L2_FWNODE + select VIDEO_V4L2_SUBDEV_API + default y + +if VIDEO_CAMERA_LENS config VIDEO_AD5820 tristate "AD5820 lens voice coil support" - depends on GPIOLIB && I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select V4L2_ASYNC + depends on GPIOLIB help This is a driver for the AD5820 camera lens voice coil. It is used for example in Nokia N900 (RX-51). config VIDEO_AK7375 tristate "AK7375 lens voice coil support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_ASYNC help This is a driver for the AK7375 camera lens voice coil. AK7375 is a 12 bit DAC with 120mA output current sink @@ -791,10 +793,7 @@ config VIDEO_AK7375 config VIDEO_DW9714 tristate "DW9714 lens voice coil support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_ASYNC + depends on GPIOLIB help This is a driver for the DW9714 camera lens voice coil. DW9714 is a 10 bit DAC with 120mA output current sink @@ -803,10 +802,6 @@ config VIDEO_DW9714 config VIDEO_DW9719 tristate "DW9719 lens voice coil support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_ASYNC select V4L2_CCI_I2C help This is a driver for the DW9719 camera lens voice coil. @@ -815,10 +810,6 @@ config VIDEO_DW9719 config VIDEO_DW9768 tristate "DW9768 lens voice coil support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_FWNODE help This is a driver for the DW9768 camera lens voice coil. DW9768 is a 10 bit DAC with 100mA output current sink @@ -827,17 +818,13 @@ config VIDEO_DW9768 config VIDEO_DW9807_VCM tristate "DW9807 lens voice coil support" - depends on I2C && VIDEO_DEV - select MEDIA_CONTROLLER - select VIDEO_V4L2_SUBDEV_API - select V4L2_ASYNC help This is a driver for the DW9807 camera lens voice coil. DW9807 is a 10 bit DAC with 100mA output current sink capability. This is designed for linear control of voice coil motors, controlled via I2C serial interface. -endmenu +endif menu "Flash devices" visible if MEDIA_CAMERA_SUPPORT @@ -1684,7 +1671,7 @@ config VIDEO_MAX96714 config VIDEO_MAX96717 tristate "Maxim MAX96717 GMSL2 Serializer support" - depends on OF && I2C && VIDEO_DEV && COMMON_CLK + depends on I2C && VIDEO_DEV && COMMON_CLK select I2C_MUX select MEDIA_CONTROLLER select GPIOLIB diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c index 6e50b14f888f..5d90b8ab9b6d 100644 --- a/drivers/media/i2c/adv7180.c +++ b/drivers/media/i2c/adv7180.c @@ -868,21 +868,6 @@ static int adv7180_get_skip_frames(struct v4l2_subdev *sd, u32 *frames) return 0; } -static int adv7180_g_pixelaspect(struct v4l2_subdev *sd, struct v4l2_fract *aspect) -{ - struct adv7180_state *state = to_state(sd); - - if (state->curr_norm & V4L2_STD_525_60) { - aspect->numerator = 11; - aspect->denominator = 10; - } else { - aspect->numerator = 54; - aspect->denominator = 59; - } - - return 0; -} - static int adv7180_g_tvnorms(struct v4l2_subdev *sd, v4l2_std_id *norm) { *norm = V4L2_STD_ALL; @@ -929,7 +914,6 @@ static const struct v4l2_subdev_video_ops adv7180_video_ops = { .querystd = adv7180_querystd, .g_input_status = adv7180_g_input_status, .s_routing = adv7180_s_routing, - .g_pixelaspect = adv7180_g_pixelaspect, .g_tvnorms = adv7180_g_tvnorms, .s_stream = adv7180_s_stream, }; diff --git a/drivers/media/i2c/adv748x/adv748x-afe.c b/drivers/media/i2c/adv748x/adv748x-afe.c index 5edb3295dc58..678199196b84 100644 --- a/drivers/media/i2c/adv748x/adv748x-afe.c +++ b/drivers/media/i2c/adv748x/adv748x-afe.c @@ -161,22 +161,6 @@ int adv748x_afe_s_input(struct adv748x_afe *afe, unsigned int input) return sdp_write(state, ADV748X_SDP_INSEL, input); } -static int adv748x_afe_g_pixelaspect(struct v4l2_subdev *sd, - struct v4l2_fract *aspect) -{ - struct adv748x_afe *afe = adv748x_sd_to_afe(sd); - - if (afe->curr_norm & V4L2_STD_525_60) { - aspect->numerator = 11; - aspect->denominator = 10; - } else { - aspect->numerator = 54; - aspect->denominator = 59; - } - - return 0; -} - /* ----------------------------------------------------------------------------- * v4l2_subdev_video_ops */ @@ -307,7 +291,6 @@ static const struct v4l2_subdev_video_ops adv748x_afe_video_ops = { .g_tvnorms = adv748x_afe_g_tvnorms, .g_input_status = adv748x_afe_g_input_status, .s_stream = adv748x_afe_s_stream, - .g_pixelaspect = adv748x_afe_g_pixelaspect, }; /* ----------------------------------------------------------------------------- diff --git a/drivers/media/i2c/adv748x/adv748x-hdmi.c b/drivers/media/i2c/adv748x/adv748x-hdmi.c index a4db9bae5f79..b154dea29ba2 100644 --- a/drivers/media/i2c/adv748x/adv748x-hdmi.c +++ b/drivers/media/i2c/adv748x/adv748x-hdmi.c @@ -382,19 +382,9 @@ done: return ret; } -static int adv748x_hdmi_g_pixelaspect(struct v4l2_subdev *sd, - struct v4l2_fract *aspect) -{ - aspect->numerator = 1; - aspect->denominator = 1; - - return 0; -} - static const struct v4l2_subdev_video_ops adv748x_video_ops_hdmi = { .g_input_status = adv748x_hdmi_g_input_status, .s_stream = adv748x_hdmi_s_stream, - .g_pixelaspect = adv748x_hdmi_g_pixelaspect, }; /* ----------------------------------------------------------------------------- diff --git a/drivers/media/i2c/adv7604.c b/drivers/media/i2c/adv7604.c index e271782b7b70..afed38596362 100644 --- a/drivers/media/i2c/adv7604.c +++ b/drivers/media/i2c/adv7604.c @@ -2448,8 +2448,8 @@ static int adv76xx_set_edid(struct v4l2_subdev *sd, struct v4l2_edid *edid) } cec_s_phys_addr(state->cec_adap, parent_pa, false); - /* enable hotplug after 100 ms */ - schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 10); + /* enable hotplug after 143 ms */ + schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 7); return 0; } diff --git a/drivers/media/i2c/ds90ub913.c b/drivers/media/i2c/ds90ub913.c index 6d3f8617ef13..bc74499b0a96 100644 --- a/drivers/media/i2c/ds90ub913.c +++ b/drivers/media/i2c/ds90ub913.c @@ -203,9 +203,9 @@ static int ub913_gpio_direction_out(struct gpio_chip *gc, unsigned int offset, 0)); } -static void ub913_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +static int ub913_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) { - ub913_gpio_direction_out(gc, offset, value); + return ub913_gpio_direction_out(gc, offset, value); } static int ub913_gpio_of_xlate(struct gpio_chip *gc, @@ -235,7 +235,7 @@ static int ub913_gpiochip_probe(struct ub913_data *priv) gc->ngpio = UB913_NUM_GPIOS; gc->get_direction = ub913_gpio_get_direction; gc->direction_output = ub913_gpio_direction_out; - gc->set = ub913_gpio_set; + gc->set_rv = ub913_gpio_set; gc->of_xlate = ub913_gpio_of_xlate; gc->of_gpio_n_cells = 2; @@ -337,14 +337,6 @@ static int _ub913_set_routing(struct v4l2_subdev *sd, unsigned int i; int ret; - /* - * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until - * frame desc is made dynamically allocated. - */ - - if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) - return -EINVAL; - ret = v4l2_subdev_routing_validate(sd, routing, V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); if (ret) diff --git a/drivers/media/i2c/ds90ub953.c b/drivers/media/i2c/ds90ub953.c index 59bd92388845..a865bfc89500 100644 --- a/drivers/media/i2c/ds90ub953.c +++ b/drivers/media/i2c/ds90ub953.c @@ -317,14 +317,13 @@ static int ub953_gpio_get(struct gpio_chip *gc, unsigned int offset) return !!(v & UB953_REG_GPIO_PIN_STS_GPIO_STS(offset)); } -static void ub953_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) +static int ub953_gpio_set(struct gpio_chip *gc, unsigned int offset, int value) { struct ub953_data *priv = gpiochip_get_data(gc); - regmap_update_bits(priv->regmap, UB953_REG_LOCAL_GPIO_DATA, - UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), - value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : - 0); + return regmap_update_bits(priv->regmap, UB953_REG_LOCAL_GPIO_DATA, + UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset), + value ? UB953_REG_LOCAL_GPIO_DATA_GPIO_OUT_SRC(offset) : 0); } static int ub953_gpio_of_xlate(struct gpio_chip *gc, @@ -362,7 +361,7 @@ static int ub953_gpiochip_probe(struct ub953_data *priv) gc->direction_input = ub953_gpio_direction_in; gc->direction_output = ub953_gpio_direction_out; gc->get = ub953_gpio_get; - gc->set = ub953_gpio_set; + gc->set_rv = ub953_gpio_set; gc->of_xlate = ub953_gpio_of_xlate; gc->of_gpio_n_cells = 2; @@ -400,14 +399,6 @@ static int _ub953_set_routing(struct v4l2_subdev *sd, }; int ret; - /* - * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until - * frame desc is made dynamically allocated. - */ - - if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) - return -EINVAL; - ret = v4l2_subdev_routing_validate(sd, routing, V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); if (ret) diff --git a/drivers/media/i2c/ds90ub960.c b/drivers/media/i2c/ds90ub960.c index 082fc62b0f5b..3156f6d6c6de 100644 --- a/drivers/media/i2c/ds90ub960.c +++ b/drivers/media/i2c/ds90ub960.c @@ -3861,14 +3861,6 @@ static int _ub960_set_routing(struct v4l2_subdev *sd, }; int ret; - /* - * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until - * frame desc is made dynamically allocated. - */ - - if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) - return -E2BIG; - ret = v4l2_subdev_routing_validate(sd, routing, V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 | V4L2_SUBDEV_ROUTING_NO_SINK_STREAM_MIX); diff --git a/drivers/media/i2c/dw9714.c b/drivers/media/i2c/dw9714.c index 2ddd7daa79e2..1e7ad355a388 100644 --- a/drivers/media/i2c/dw9714.c +++ b/drivers/media/i2c/dw9714.c @@ -2,6 +2,7 @@ // Copyright (c) 2015--2017 Intel Corporation. #include <linux/delay.h> +#include <linux/gpio/consumer.h> #include <linux/i2c.h> #include <linux/module.h> #include <linux/pm_runtime.h> @@ -38,6 +39,7 @@ struct dw9714_device { struct v4l2_subdev sd; u16 current_val; struct regulator *vcc; + struct gpio_desc *powerdown_gpio; }; static inline struct dw9714_device *to_dw9714_vcm(struct v4l2_ctrl *ctrl) @@ -137,6 +139,28 @@ static int dw9714_init_controls(struct dw9714_device *dev_vcm) return hdl->error; } +static int dw9714_power_up(struct dw9714_device *dw9714_dev) +{ + int ret; + + ret = regulator_enable(dw9714_dev->vcc); + if (ret) + return ret; + + gpiod_set_value_cansleep(dw9714_dev->powerdown_gpio, 0); + + usleep_range(1000, 2000); + + return 0; +} + +static int dw9714_power_down(struct dw9714_device *dw9714_dev) +{ + gpiod_set_value_cansleep(dw9714_dev->powerdown_gpio, 1); + + return regulator_disable(dw9714_dev->vcc); +} + static int dw9714_probe(struct i2c_client *client) { struct dw9714_device *dw9714_dev; @@ -144,20 +168,25 @@ static int dw9714_probe(struct i2c_client *client) dw9714_dev = devm_kzalloc(&client->dev, sizeof(*dw9714_dev), GFP_KERNEL); - if (dw9714_dev == NULL) + if (!dw9714_dev) return -ENOMEM; dw9714_dev->vcc = devm_regulator_get(&client->dev, "vcc"); if (IS_ERR(dw9714_dev->vcc)) return PTR_ERR(dw9714_dev->vcc); - rval = regulator_enable(dw9714_dev->vcc); - if (rval < 0) { - dev_err(&client->dev, "failed to enable vcc: %d\n", rval); - return rval; - } + dw9714_dev->powerdown_gpio = devm_gpiod_get_optional(&client->dev, + "powerdown", + GPIOD_OUT_HIGH); + if (IS_ERR(dw9714_dev->powerdown_gpio)) + return dev_err_probe(&client->dev, + PTR_ERR(dw9714_dev->powerdown_gpio), + "could not get powerdown gpio\n"); - usleep_range(1000, 2000); + rval = dw9714_power_up(dw9714_dev); + if (rval) + return dev_err_probe(&client->dev, rval, + "failed to power up: %d\n", rval); v4l2_i2c_subdev_init(&dw9714_dev->sd, client, &dw9714_ops); dw9714_dev->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | @@ -185,7 +214,7 @@ static int dw9714_probe(struct i2c_client *client) return 0; err_cleanup: - regulator_disable(dw9714_dev->vcc); + dw9714_power_down(dw9714_dev); v4l2_ctrl_handler_free(&dw9714_dev->ctrls_vcm); media_entity_cleanup(&dw9714_dev->sd.entity); @@ -200,10 +229,10 @@ static void dw9714_remove(struct i2c_client *client) pm_runtime_disable(&client->dev); if (!pm_runtime_status_suspended(&client->dev)) { - ret = regulator_disable(dw9714_dev->vcc); + ret = dw9714_power_down(dw9714_dev); if (ret) { dev_err(&client->dev, - "Failed to disable vcc: %d\n", ret); + "Failed to power down: %d\n", ret); } } pm_runtime_set_suspended(&client->dev); @@ -234,9 +263,9 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev) usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10); } - ret = regulator_disable(dw9714_dev->vcc); + ret = dw9714_power_down(dw9714_dev); if (ret) - dev_err(dev, "Failed to disable vcc: %d\n", ret); + dev_err(dev, "Failed to power down: %d\n", ret); return ret; } @@ -247,7 +276,7 @@ static int __maybe_unused dw9714_vcm_suspend(struct device *dev) * The lens position is gradually moved in units of DW9714_CTRL_STEPS, * to make the movements smoothly. */ -static int __maybe_unused dw9714_vcm_resume(struct device *dev) +static int __maybe_unused dw9714_vcm_resume(struct device *dev) { struct i2c_client *client = to_i2c_client(dev); struct v4l2_subdev *sd = i2c_get_clientdata(client); @@ -257,12 +286,11 @@ static int __maybe_unused dw9714_vcm_resume(struct device *dev) if (pm_runtime_suspended(&client->dev)) return 0; - ret = regulator_enable(dw9714_dev->vcc); + ret = dw9714_power_up(dw9714_dev); if (ret) { - dev_err(dev, "Failed to enable vcc: %d\n", ret); + dev_err(dev, "Failed to power up: %d\n", ret); return ret; } - usleep_range(1000, 2000); for (val = dw9714_dev->current_val % DW9714_CTRL_STEPS; val < dw9714_dev->current_val + DW9714_CTRL_STEPS - 1; @@ -271,7 +299,7 @@ static int __maybe_unused dw9714_vcm_resume(struct device *dev) DW9714_VAL(val, DW9714_DEFAULT_S)); if (ret) dev_err_ratelimited(dev, "%s I2C failure: %d", - __func__, ret); + __func__, ret); usleep_range(DW9714_CTRL_DELAY_US, DW9714_CTRL_DELAY_US + 10); } diff --git a/drivers/media/i2c/hi556.c b/drivers/media/i2c/hi556.c index aed258211b8a..076c19fcf99c 100644 --- a/drivers/media/i2c/hi556.c +++ b/drivers/media/i2c/hi556.c @@ -624,6 +624,12 @@ static const struct hi556_mode supported_modes[] = { }, }; +static const char * const hi556_supply_names[] = { + "dovdd", /* Digital I/O power */ + "avdd", /* Analog power */ + "dvdd", /* Digital core power */ +}; + struct hi556 { struct v4l2_subdev sd; struct media_pad pad; @@ -639,7 +645,7 @@ struct hi556 { /* GPIOs, clocks, etc. */ struct gpio_desc *reset_gpio; struct clk *clk; - struct regulator *avdd; + struct regulator_bulk_data supplies[ARRAY_SIZE(hi556_supply_names)]; /* Current mode */ const struct hi556_mode *cur_mode; @@ -756,21 +762,23 @@ static int hi556_test_pattern(struct hi556 *hi556, u32 pattern) int ret; u32 val; - if (pattern) { - ret = hi556_read_reg(hi556, HI556_REG_ISP, - HI556_REG_VALUE_08BIT, &val); - if (ret) - return ret; + ret = hi556_read_reg(hi556, HI556_REG_ISP, + HI556_REG_VALUE_08BIT, &val); + if (ret) + return ret; - ret = hi556_write_reg(hi556, HI556_REG_ISP, - HI556_REG_VALUE_08BIT, - val | HI556_REG_ISP_TPG_EN); - if (ret) - return ret; - } + val = pattern ? (val | HI556_REG_ISP_TPG_EN) : + (val & ~HI556_REG_ISP_TPG_EN); + + ret = hi556_write_reg(hi556, HI556_REG_ISP, + HI556_REG_VALUE_08BIT, val); + if (ret) + return ret; + + val = pattern ? BIT(pattern - 1) : 0; return hi556_write_reg(hi556, HI556_REG_TEST_PATTERN, - HI556_REG_VALUE_08BIT, pattern); + HI556_REG_VALUE_08BIT, val); } static int hi556_set_ctrl(struct v4l2_ctrl *ctrl) @@ -1289,17 +1297,10 @@ static int hi556_suspend(struct device *dev) { struct v4l2_subdev *sd = dev_get_drvdata(dev); struct hi556 *hi556 = to_hi556(sd); - int ret; gpiod_set_value_cansleep(hi556->reset_gpio, 1); - - ret = regulator_disable(hi556->avdd); - if (ret) { - dev_err(dev, "failed to disable avdd: %d\n", ret); - gpiod_set_value_cansleep(hi556->reset_gpio, 0); - return ret; - } - + regulator_bulk_disable(ARRAY_SIZE(hi556_supply_names), + hi556->supplies); clk_disable_unprepare(hi556->clk); return 0; } @@ -1314,14 +1315,20 @@ static int hi556_resume(struct device *dev) if (ret) return ret; - ret = regulator_enable(hi556->avdd); + ret = regulator_bulk_enable(ARRAY_SIZE(hi556_supply_names), + hi556->supplies); if (ret) { - dev_err(dev, "failed to enable avdd: %d\n", ret); + dev_err(dev, "failed to enable regulators: %d", ret); clk_disable_unprepare(hi556->clk); return ret; } - gpiod_set_value_cansleep(hi556->reset_gpio, 0); + if (hi556->reset_gpio) { + /* Assert reset for at least 2ms on back to back off-on */ + usleep_range(2000, 2200); + gpiod_set_value_cansleep(hi556->reset_gpio, 0); + } + usleep_range(5000, 5500); return 0; } @@ -1330,7 +1337,7 @@ static int hi556_probe(struct i2c_client *client) { struct hi556 *hi556; bool full_power; - int ret; + int i, ret; ret = hi556_check_hwcfg(&client->dev); if (ret) @@ -1353,11 +1360,15 @@ static int hi556_probe(struct i2c_client *client) return dev_err_probe(&client->dev, PTR_ERR(hi556->clk), "failed to get clock\n"); - /* The regulator core will provide a "dummy" regulator if necessary */ - hi556->avdd = devm_regulator_get(&client->dev, "avdd"); - if (IS_ERR(hi556->avdd)) - return dev_err_probe(&client->dev, PTR_ERR(hi556->avdd), - "failed to get avdd regulator\n"); + for (i = 0; i < ARRAY_SIZE(hi556_supply_names); i++) + hi556->supplies[i].supply = hi556_supply_names[i]; + + ret = devm_regulator_bulk_get(&client->dev, + ARRAY_SIZE(hi556_supply_names), + hi556->supplies); + if (ret) + return dev_err_probe(&client->dev, ret, + "failed to get regulators\n"); full_power = acpi_dev_state_d0(&client->dev); if (full_power) { diff --git a/drivers/media/i2c/imx214.c b/drivers/media/i2c/imx214.c index dd7bc45523d8..a0cef9e61b41 100644 --- a/drivers/media/i2c/imx214.c +++ b/drivers/media/i2c/imx214.c @@ -20,6 +20,8 @@ #include <media/v4l2-fwnode.h> #include <media/v4l2-subdev.h> +#include "ccs-pll.h" + /* Chip ID */ #define IMX214_REG_CHIP_ID CCI_REG16(0x0016) #define IMX214_CHIP_ID 0x0214 @@ -30,11 +32,9 @@ #define IMX214_REG_FAST_STANDBY_CTRL CCI_REG8(0x0106) -#define IMX214_DEFAULT_CLK_FREQ 24000000 #define IMX214_DEFAULT_LINK_FREQ 600000000 /* Keep wrong link frequency for backward compatibility */ #define IMX214_DEFAULT_LINK_FREQ_LEGACY 480000000 -#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10) #define IMX214_FPS 30 /* V-TIMING internal */ @@ -84,6 +84,7 @@ #define IMX214_CSI_DATA_FORMAT_RAW10 0x0A0A #define IMX214_CSI_DATA_FORMAT_COMP6 0x0A06 #define IMX214_CSI_DATA_FORMAT_COMP8 0x0A08 +#define IMX214_BITS_PER_PIXEL_MASK 0xFF #define IMX214_REG_CSI_LANE_MODE CCI_REG8(0x0114) #define IMX214_CSI_2_LANE_MODE 1 @@ -249,6 +250,10 @@ struct imx214 { struct clk *xclk; struct regmap *regmap; + struct ccs_pll pll; + + struct v4l2_fwnode_endpoint bus_cfg; + struct v4l2_subdev sd; struct media_pad pad; @@ -299,16 +304,6 @@ static const struct cci_reg_sequence mode_4096x2304[] = { { IMX214_REG_DIG_CROP_WIDTH, 4096 }, { IMX214_REG_DIG_CROP_HEIGHT, 2304 }, - { IMX214_REG_VTPXCK_DIV, 5 }, - { IMX214_REG_VTSYCK_DIV, 2 }, - { IMX214_REG_PREPLLCK_VT_DIV, 3 }, - { IMX214_REG_PLL_VT_MPY, 150 }, - { IMX214_REG_OPPXCK_DIV, 10 }, - { IMX214_REG_OPSYCK_DIV, 1 }, - { IMX214_REG_PLL_MULT_DRIV, IMX214_PLL_SINGLE }, - - { IMX214_REG_REQ_LINK_BIT_RATE, IMX214_LINK_BIT_RATE_MBPS(4800) }, - { CCI_REG8(0x3A03), 0x09 }, { CCI_REG8(0x3A04), 0x50 }, { CCI_REG8(0x3A05), 0x01 }, @@ -362,16 +357,6 @@ static const struct cci_reg_sequence mode_1920x1080[] = { { IMX214_REG_DIG_CROP_WIDTH, 1920 }, { IMX214_REG_DIG_CROP_HEIGHT, 1080 }, - { IMX214_REG_VTPXCK_DIV, 5 }, - { IMX214_REG_VTSYCK_DIV, 2 }, - { IMX214_REG_PREPLLCK_VT_DIV, 3 }, - { IMX214_REG_PLL_VT_MPY, 150 }, - { IMX214_REG_OPPXCK_DIV, 10 }, - { IMX214_REG_OPSYCK_DIV, 1 }, - { IMX214_REG_PLL_MULT_DRIV, IMX214_PLL_SINGLE }, - - { IMX214_REG_REQ_LINK_BIT_RATE, IMX214_LINK_BIT_RATE_MBPS(4800) }, - { CCI_REG8(0x3A03), 0x04 }, { CCI_REG8(0x3A04), 0xF8 }, { CCI_REG8(0x3A05), 0x02 }, @@ -405,9 +390,6 @@ static const struct cci_reg_sequence mode_table_common[] = { /* ATR setting */ { IMX214_REG_ATR_FAST_MOVE, 2 }, - /* external clock setting */ - { IMX214_REG_EXCK_FREQ, IMX214_EXCK_FREQ(IMX214_DEFAULT_CLK_FREQ / 1000000) }, - /* global setting */ /* basic config */ { IMX214_REG_MASK_CORR_FRAMES, IMX214_CORR_FRAMES_MASK }, @@ -777,6 +759,30 @@ static int imx214_entity_init_state(struct v4l2_subdev *subdev, return 0; } +static int imx214_configure_pll(struct imx214 *imx214) +{ + int ret = 0; + + cci_write(imx214->regmap, IMX214_REG_VTPXCK_DIV, + imx214->pll.vt_bk.pix_clk_div, &ret); + cci_write(imx214->regmap, IMX214_REG_VTSYCK_DIV, + imx214->pll.vt_bk.sys_clk_div, &ret); + cci_write(imx214->regmap, IMX214_REG_PREPLLCK_VT_DIV, + imx214->pll.vt_fr.pre_pll_clk_div, &ret); + cci_write(imx214->regmap, IMX214_REG_PLL_VT_MPY, + imx214->pll.vt_fr.pll_multiplier, &ret); + cci_write(imx214->regmap, IMX214_REG_OPPXCK_DIV, + imx214->pll.op_bk.pix_clk_div, &ret); + cci_write(imx214->regmap, IMX214_REG_OPSYCK_DIV, + imx214->pll.op_bk.sys_clk_div, &ret); + cci_write(imx214->regmap, IMX214_REG_PLL_MULT_DRIV, + IMX214_PLL_SINGLE, &ret); + cci_write(imx214->regmap, IMX214_REG_EXCK_FREQ, + IMX214_EXCK_FREQ(imx214->pll.ext_clk_freq_hz / 1000000), &ret); + + return ret; +} + static int imx214_update_digital_gain(struct imx214 *imx214, u32 val) { int ret = 0; @@ -877,9 +883,6 @@ static const struct v4l2_ctrl_ops imx214_ctrl_ops = { static int imx214_ctrls_init(struct imx214 *imx214) { - static const s64 link_freq[] = { - IMX214_DEFAULT_LINK_FREQ - }; static const struct v4l2_area unit_size = { .width = 1120, .height = 1120, @@ -900,15 +903,14 @@ static int imx214_ctrls_init(struct imx214 *imx214) if (ret) return ret; - imx214->pixel_rate = v4l2_ctrl_new_std(ctrl_hdlr, NULL, - V4L2_CID_PIXEL_RATE, 0, - IMX214_DEFAULT_PIXEL_RATE, 1, - IMX214_DEFAULT_PIXEL_RATE); + imx214->pixel_rate = + v4l2_ctrl_new_std(ctrl_hdlr, NULL, V4L2_CID_PIXEL_RATE, 1, + INT_MAX, 1, 1); imx214->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, NULL, V4L2_CID_LINK_FREQ, - ARRAY_SIZE(link_freq) - 1, - 0, link_freq); + imx214->bus_cfg.nr_of_link_frequencies - 1, + 0, imx214->bus_cfg.link_frequencies); if (imx214->link_freq) imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY; @@ -1011,6 +1013,7 @@ static int imx214_start_streaming(struct imx214 *imx214) const struct v4l2_mbus_framefmt *fmt; struct v4l2_subdev_state *state; const struct imx214_mode *mode; + int bit_rate_mbps; int ret; ret = cci_multi_reg_write(imx214->regmap, mode_table_common, @@ -1020,6 +1023,21 @@ static int imx214_start_streaming(struct imx214 *imx214) return ret; } + ret = imx214_configure_pll(imx214); + if (ret) { + dev_err(imx214->dev, "failed to configure PLL: %d\n", ret); + return ret; + } + + bit_rate_mbps = (imx214->pll.pixel_rate_csi / 1000000) + * imx214->pll.bits_per_pixel; + ret = cci_write(imx214->regmap, IMX214_REG_REQ_LINK_BIT_RATE, + IMX214_LINK_BIT_RATE_MBPS(bit_rate_mbps), NULL); + if (ret) { + dev_err(imx214->dev, "failed to configure link bit rate\n"); + return ret; + } + ret = cci_write(imx214->regmap, IMX214_REG_CSI_LANE_MODE, IMX214_CSI_4_LANE_MODE, NULL); if (ret) { @@ -1097,6 +1115,109 @@ err_rpm_put: return ret; } +static int imx214_pll_calculate(struct imx214 *imx214, struct ccs_pll *pll, + unsigned int link_freq) +{ + struct ccs_pll_limits limits = { + .min_ext_clk_freq_hz = 6000000, + .max_ext_clk_freq_hz = 27000000, + + .vt_fr = { + .min_pre_pll_clk_div = 1, + .max_pre_pll_clk_div = 15, + /* Value is educated guess as we don't have a spec */ + .min_pll_ip_clk_freq_hz = 6000000, + /* Value is educated guess as we don't have a spec */ + .max_pll_ip_clk_freq_hz = 12000000, + .min_pll_multiplier = 12, + .max_pll_multiplier = 1200, + .min_pll_op_clk_freq_hz = 338000000, + .max_pll_op_clk_freq_hz = 1200000000, + }, + .vt_bk = { + .min_sys_clk_div = 2, + .max_sys_clk_div = 4, + .min_pix_clk_div = 5, + .max_pix_clk_div = 10, + .min_pix_clk_freq_hz = 30000000, + .max_pix_clk_freq_hz = 120000000, + }, + .op_bk = { + .min_sys_clk_div = 1, + .max_sys_clk_div = 2, + .min_pix_clk_div = 6, + .max_pix_clk_div = 10, + .min_pix_clk_freq_hz = 30000000, + .max_pix_clk_freq_hz = 120000000, + }, + + .min_line_length_pck_bin = IMX214_PPL_DEFAULT, + .min_line_length_pck = IMX214_PPL_DEFAULT, + }; + unsigned int num_lanes = imx214->bus_cfg.bus.mipi_csi2.num_data_lanes; + + /* + * There are no documented constraints on the sys clock frequency, for + * either branch. Recover them based on the PLL output clock frequency + * and sys_clk_div limits on one hand, and the pix clock frequency and + * the pix_clk_div limits on the other hand. + */ + limits.vt_bk.min_sys_clk_freq_hz = + max(limits.vt_fr.min_pll_op_clk_freq_hz / limits.vt_bk.max_sys_clk_div, + limits.vt_bk.min_pix_clk_freq_hz * limits.vt_bk.min_pix_clk_div); + limits.vt_bk.max_sys_clk_freq_hz = + min(limits.vt_fr.max_pll_op_clk_freq_hz / limits.vt_bk.min_sys_clk_div, + limits.vt_bk.max_pix_clk_freq_hz * limits.vt_bk.max_pix_clk_div); + + limits.op_bk.min_sys_clk_freq_hz = + max(limits.vt_fr.min_pll_op_clk_freq_hz / limits.op_bk.max_sys_clk_div, + limits.op_bk.min_pix_clk_freq_hz * limits.op_bk.min_pix_clk_div); + limits.op_bk.max_sys_clk_freq_hz = + min(limits.vt_fr.max_pll_op_clk_freq_hz / limits.op_bk.min_sys_clk_div, + limits.op_bk.max_pix_clk_freq_hz * limits.op_bk.max_pix_clk_div); + + memset(pll, 0, sizeof(*pll)); + + pll->bus_type = CCS_PLL_BUS_TYPE_CSI2_DPHY; + pll->op_lanes = num_lanes; + pll->vt_lanes = num_lanes; + pll->csi2.lanes = num_lanes; + + pll->binning_horizontal = 1; + pll->binning_vertical = 1; + pll->scale_m = 1; + pll->scale_n = 1; + pll->bits_per_pixel = + IMX214_CSI_DATA_FORMAT_RAW10 & IMX214_BITS_PER_PIXEL_MASK; + pll->flags = CCS_PLL_FLAG_LANE_SPEED_MODEL; + pll->link_freq = link_freq; + pll->ext_clk_freq_hz = clk_get_rate(imx214->xclk); + + return ccs_pll_calculate(imx214->dev, &limits, pll); +} + +static int imx214_pll_update(struct imx214 *imx214) +{ + u64 link_freq; + int ret; + + link_freq = imx214->bus_cfg.link_frequencies[imx214->link_freq->val]; + ret = imx214_pll_calculate(imx214, &imx214->pll, link_freq); + if (ret) { + dev_err(imx214->dev, "PLL calculations failed: %d\n", ret); + return ret; + } + + ret = v4l2_ctrl_s_ctrl_int64(imx214->pixel_rate, + imx214->pll.pixel_rate_pixel_array); + if (ret) { + dev_err(imx214->dev, "failed to set pixel rate\n"); + return ret; + } + + return 0; +} + static int imx214_get_frame_interval(struct v4l2_subdev *subdev, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_frame_interval *fival) @@ -1203,12 +1324,10 @@ static int imx214_identify_module(struct imx214 *imx214) return 0; } -static int imx214_parse_fwnode(struct device *dev) +static int imx214_parse_fwnode(struct device *dev, struct imx214 *imx214) { + struct v4l2_fwnode_endpoint *bus_cfg = &imx214->bus_cfg; struct fwnode_handle *endpoint; - struct v4l2_fwnode_endpoint bus_cfg = { - .bus_type = V4L2_MBUS_CSI2_DPHY, - }; unsigned int i; int ret; @@ -1216,42 +1335,52 @@ static int imx214_parse_fwnode(struct device *dev) if (!endpoint) return dev_err_probe(dev, -EINVAL, "endpoint node not found\n"); - ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg); + bus_cfg->bus_type = V4L2_MBUS_CSI2_DPHY; + ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, bus_cfg); + fwnode_handle_put(endpoint); if (ret) { dev_err_probe(dev, ret, "parsing endpoint node failed\n"); - goto done; + goto error; } /* Check the number of MIPI CSI2 data lanes */ - if (bus_cfg.bus.mipi_csi2.num_data_lanes != 4) { + if (bus_cfg->bus.mipi_csi2.num_data_lanes != 4) { ret = dev_err_probe(dev, -EINVAL, "only 4 data lanes are currently supported\n"); - goto done; + goto error; } - if (bus_cfg.nr_of_link_frequencies != 1) + if (bus_cfg->nr_of_link_frequencies != 1) dev_warn(dev, "Only one link-frequency supported, please review your DT. Continuing anyway\n"); - for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++) { - if (bus_cfg.link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ) + for (i = 0; i < bus_cfg->nr_of_link_frequencies; i++) { + u64 freq = bus_cfg->link_frequencies[i]; + struct ccs_pll pll; + + if (!imx214_pll_calculate(imx214, &pll, freq)) break; - if (bus_cfg.link_frequencies[i] == - IMX214_DEFAULT_LINK_FREQ_LEGACY) { + if (freq == IMX214_DEFAULT_LINK_FREQ_LEGACY) { dev_warn(dev, "link-frequencies %d not supported, please review your DT. Continuing anyway\n", IMX214_DEFAULT_LINK_FREQ); + freq = IMX214_DEFAULT_LINK_FREQ; + if (imx214_pll_calculate(imx214, &pll, freq)) + continue; + bus_cfg->link_frequencies[i] = freq; break; } } - if (i == bus_cfg.nr_of_link_frequencies) + if (i == bus_cfg->nr_of_link_frequencies) ret = dev_err_probe(dev, -EINVAL, - "link-frequencies %d not supported, please review your DT\n", - IMX214_DEFAULT_LINK_FREQ); + "link-frequencies %lld not supported, please review your DT\n", + bus_cfg->nr_of_link_frequencies ? + bus_cfg->link_frequencies[0] : 0); -done: - v4l2_fwnode_endpoint_free(&bus_cfg); - fwnode_handle_put(endpoint); + return 0; + +error: + v4l2_fwnode_endpoint_free(&imx214->bus_cfg); return ret; } @@ -1261,10 +1390,6 @@ static int imx214_probe(struct i2c_client *client) struct imx214 *imx214; int ret; - ret = imx214_parse_fwnode(dev); - if (ret) - return ret; - imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL); if (!imx214) return -ENOMEM; @@ -1276,11 +1401,6 @@ static int imx214_probe(struct i2c_client *client) return dev_err_probe(dev, PTR_ERR(imx214->xclk), "failed to get xclk\n"); - ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ); - if (ret) - return dev_err_probe(dev, ret, - "failed to set xclk frequency\n"); - ret = imx214_get_regulators(dev, imx214); if (ret < 0) return dev_err_probe(dev, ret, "failed to get regulators\n"); @@ -1295,6 +1415,10 @@ static int imx214_probe(struct i2c_client *client) return dev_err_probe(dev, PTR_ERR(imx214->regmap), "failed to initialize CCI\n"); + ret = imx214_parse_fwnode(dev, imx214); + if (ret) + return ret; + v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops); imx214->sd.internal_ops = &imx214_internal_ops; @@ -1302,7 +1426,9 @@ static int imx214_probe(struct i2c_client *client) * Enable power initially, to avoid warnings * from clk_disable on power_off */ - imx214_power_on(imx214->dev); + ret = imx214_power_on(imx214->dev); + if (ret < 0) + goto error_fwnode; ret = imx214_identify_module(imx214); if (ret) @@ -1333,6 +1459,12 @@ static int imx214_probe(struct i2c_client *client) pm_runtime_set_active(imx214->dev); pm_runtime_enable(imx214->dev); + ret = imx214_pll_update(imx214); + if (ret < 0) { + dev_err_probe(dev, ret, "failed to update PLL\n"); + goto error_subdev_cleanup; + } + ret = v4l2_async_register_subdev_sensor(&imx214->sd); if (ret < 0) { dev_err_probe(dev, ret, @@ -1358,6 +1490,9 @@ free_ctrl: error_power_off: imx214_power_off(imx214->dev); +error_fwnode: + v4l2_fwnode_endpoint_free(&imx214->bus_cfg); + return ret; } @@ -1370,6 +1505,8 @@ static void imx214_remove(struct i2c_client *client) v4l2_subdev_cleanup(sd); media_entity_cleanup(&imx214->sd.entity); v4l2_ctrl_handler_free(&imx214->ctrls); + v4l2_fwnode_endpoint_free(&imx214->bus_cfg); + pm_runtime_disable(&client->dev); if (!pm_runtime_status_suspended(&client->dev)) { imx214_power_off(imx214->dev); diff --git a/drivers/media/i2c/imx290.c b/drivers/media/i2c/imx290.c index fbf7eba3d71d..4f3f386c5353 100644 --- a/drivers/media/i2c/imx290.c +++ b/drivers/media/i2c/imx290.c @@ -1294,7 +1294,6 @@ static int imx290_subdev_init(struct imx290 *imx290) * will already be prevented even before the delay. */ v4l2_i2c_subdev_init(&imx290->sd, client, &imx290_subdev_ops); - imx290->sd.dev = imx290->dev; pm_runtime_mark_last_busy(imx290->dev); pm_runtime_put_autosuspend(imx290->dev); diff --git a/drivers/media/i2c/imx415.c b/drivers/media/i2c/imx415.c index 9f37779bd611..278e743646ea 100644 --- a/drivers/media/i2c/imx415.c +++ b/drivers/media/i2c/imx415.c @@ -1251,7 +1251,7 @@ static int imx415_parse_hw_config(struct imx415 *sensor) return dev_err_probe(sensor->dev, PTR_ERR(sensor->reset), "failed to get reset GPIO\n"); - sensor->clk = devm_clk_get(sensor->dev, "inck"); + sensor->clk = devm_clk_get(sensor->dev, NULL); if (IS_ERR(sensor->clk)) return dev_err_probe(sensor->dev, PTR_ERR(sensor->clk), "failed to get clock\n"); diff --git a/drivers/media/i2c/lt6911uxe.c b/drivers/media/i2c/lt6911uxe.c index 24857d683fcf..bdefdd157e69 100644 --- a/drivers/media/i2c/lt6911uxe.c +++ b/drivers/media/i2c/lt6911uxe.c @@ -600,7 +600,7 @@ static int lt6911uxe_probe(struct i2c_client *client) v4l2_i2c_subdev_init(<6911uxe->sd, client, <6911uxe_subdev_ops); - lt6911uxe->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_IN); + lt6911uxe->reset_gpio = devm_gpiod_get(dev, "reset", GPIOD_OUT_LOW); if (IS_ERR(lt6911uxe->reset_gpio)) return dev_err_probe(dev, PTR_ERR(lt6911uxe->reset_gpio), "failed to get reset gpio\n"); diff --git a/drivers/media/i2c/max9286.c b/drivers/media/i2c/max9286.c index 9fc4e130a273..1d0b5f56f989 100644 --- a/drivers/media/i2c/max9286.c +++ b/drivers/media/i2c/max9286.c @@ -1193,12 +1193,12 @@ static int max9286_gpio_set(struct max9286_priv *priv, unsigned int offset, MAX9286_0X0F_RESERVED | priv->gpio_state); } -static void max9286_gpiochip_set(struct gpio_chip *chip, - unsigned int offset, int value) +static int max9286_gpiochip_set(struct gpio_chip *chip, + unsigned int offset, int value) { struct max9286_priv *priv = gpiochip_get_data(chip); - max9286_gpio_set(priv, offset, value); + return max9286_gpio_set(priv, offset, value); } static int max9286_gpiochip_get(struct gpio_chip *chip, unsigned int offset) @@ -1220,7 +1220,7 @@ static int max9286_register_gpio(struct max9286_priv *priv) gpio->owner = THIS_MODULE; gpio->ngpio = 2; gpio->base = -1; - gpio->set = max9286_gpiochip_set; + gpio->set_rv = max9286_gpiochip_set; gpio->get = max9286_gpiochip_get; gpio->can_sleep = true; diff --git a/drivers/media/i2c/max96714.c b/drivers/media/i2c/max96714.c index 3cc1b1ae47d1..e3e625e6f11a 100644 --- a/drivers/media/i2c/max96714.c +++ b/drivers/media/i2c/max96714.c @@ -370,13 +370,6 @@ static int _max96714_set_routing(struct v4l2_subdev *sd, }; int ret; - /* - * Note: we can only support up to V4L2_FRAME_DESC_ENTRY_MAX, until - * frame desc is made dynamically allocated. - */ - if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX) - return -EINVAL; - ret = v4l2_subdev_routing_validate(sd, routing, V4L2_SUBDEV_ROUTING_ONLY_1_TO_1); if (ret) diff --git a/drivers/media/i2c/max96717.c b/drivers/media/i2c/max96717.c index 3746729366ac..015e42fbe246 100644 --- a/drivers/media/i2c/max96717.c +++ b/drivers/media/i2c/max96717.c @@ -297,13 +297,13 @@ static int max96717_gpiochip_get(struct gpio_chip *gpiochip, return !!(val & MAX96717_GPIO_OUT); } -static void max96717_gpiochip_set(struct gpio_chip *gpiochip, - unsigned int offset, int value) +static int max96717_gpiochip_set(struct gpio_chip *gpiochip, + unsigned int offset, int value) { struct max96717_priv *priv = gpiochip_get_data(gpiochip); - cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(offset), - MAX96717_GPIO_OUT, MAX96717_GPIO_OUT, NULL); + return cci_update_bits(priv->regmap, MAX96717_GPIO_REG_A(offset), + MAX96717_GPIO_OUT, MAX96717_GPIO_OUT, NULL); } static int max96717_gpio_get_direction(struct gpio_chip *gpiochip, @@ -355,9 +355,8 @@ static int max96717_gpiochip_probe(struct max96717_priv *priv) gc->get_direction = max96717_gpio_get_direction; gc->direction_input = max96717_gpio_direction_in; gc->direction_output = max96717_gpio_direction_out; - gc->set = max96717_gpiochip_set; + gc->set_rv = max96717_gpiochip_set; gc->get = max96717_gpiochip_get; - gc->of_gpio_n_cells = 2; /* Disable GPIO forwarding */ for (i = 0; i < gc->ngpio; i++) diff --git a/drivers/media/i2c/mt9m114.c b/drivers/media/i2c/mt9m114.c index 5f0b0ad8f885..3f540ca40f3c 100644 --- a/drivers/media/i2c/mt9m114.c +++ b/drivers/media/i2c/mt9m114.c @@ -261,6 +261,7 @@ #define MT9M114_CAM_PGA_PGA_CONTROL CCI_REG16(0xc95e) #define MT9M114_CAM_SYSCTL_PLL_ENABLE CCI_REG8(0xc97e) #define MT9M114_CAM_SYSCTL_PLL_ENABLE_VALUE BIT(0) +#define MT9M114_CAM_SYSCTL_PLL_DISABLE_VALUE 0x00 #define MT9M114_CAM_SYSCTL_PLL_DIVIDER_M_N CCI_REG16(0xc980) #define MT9M114_CAM_SYSCTL_PLL_DIVIDER_VALUE(m, n) (((n) << 8) | (m)) #define MT9M114_CAM_SYSCTL_PLL_DIVIDER_P CCI_REG16(0xc982) @@ -377,6 +378,7 @@ struct mt9m114 { struct gpio_desc *reset; struct regulator_bulk_data supplies[3]; struct v4l2_fwnode_endpoint bus_cfg; + bool bypass_pll; struct { unsigned int m; @@ -743,14 +745,21 @@ static int mt9m114_initialize(struct mt9m114 *sensor) } /* Configure the PLL. */ - cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_ENABLE, - MT9M114_CAM_SYSCTL_PLL_ENABLE_VALUE, &ret); - cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_DIVIDER_M_N, - MT9M114_CAM_SYSCTL_PLL_DIVIDER_VALUE(sensor->pll.m, - sensor->pll.n), - &ret); - cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_DIVIDER_P, - MT9M114_CAM_SYSCTL_PLL_DIVIDER_P_VALUE(sensor->pll.p), &ret); + if (sensor->bypass_pll) { + cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_ENABLE, + MT9M114_CAM_SYSCTL_PLL_DISABLE_VALUE, &ret); + } else { + cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_ENABLE, + MT9M114_CAM_SYSCTL_PLL_ENABLE_VALUE, &ret); + cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_DIVIDER_M_N, + MT9M114_CAM_SYSCTL_PLL_DIVIDER_VALUE(sensor->pll.m, + sensor->pll.n), + &ret); + cci_write(sensor->regmap, MT9M114_CAM_SYSCTL_PLL_DIVIDER_P, + MT9M114_CAM_SYSCTL_PLL_DIVIDER_P_VALUE(sensor->pll.p), + &ret); + } + cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_PIXCLK, sensor->pixrate, &ret); @@ -781,41 +790,25 @@ static int mt9m114_initialize(struct mt9m114 *sensor) return 0; } -static int mt9m114_configure(struct mt9m114 *sensor, - struct v4l2_subdev_state *pa_state, - struct v4l2_subdev_state *ifp_state) +static int mt9m114_configure_pa(struct mt9m114 *sensor, + struct v4l2_subdev_state *state) { - const struct v4l2_mbus_framefmt *pa_format; - const struct v4l2_rect *pa_crop; - const struct mt9m114_format_info *ifp_info; - const struct v4l2_mbus_framefmt *ifp_format; - const struct v4l2_rect *ifp_crop; - const struct v4l2_rect *ifp_compose; + const struct v4l2_mbus_framefmt *format; + const struct v4l2_rect *crop; unsigned int hratio, vratio; - u64 output_format; u64 read_mode; - int ret = 0; - - pa_format = v4l2_subdev_state_get_format(pa_state, 0); - pa_crop = v4l2_subdev_state_get_crop(pa_state, 0); + int ret; - ifp_format = v4l2_subdev_state_get_format(ifp_state, 1); - ifp_info = mt9m114_format_info(sensor, 1, ifp_format->code); - ifp_crop = v4l2_subdev_state_get_crop(ifp_state, 0); - ifp_compose = v4l2_subdev_state_get_compose(ifp_state, 0); + format = v4l2_subdev_state_get_format(state, 0); + crop = v4l2_subdev_state_get_crop(state, 0); ret = cci_read(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE, &read_mode, NULL); if (ret < 0) return ret; - ret = cci_read(sensor->regmap, MT9M114_CAM_OUTPUT_FORMAT, - &output_format, NULL); - if (ret < 0) - return ret; - - hratio = pa_crop->width / pa_format->width; - vratio = pa_crop->height / pa_format->height; + hratio = crop->width / format->width; + vratio = crop->height / format->height; /* * Pixel array crop and binning. The CAM_SENSOR_CFG_CPIPE_LAST_ROW @@ -824,15 +817,15 @@ static int mt9m114_configure(struct mt9m114 *sensor, * example sensor modes. */ cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_X_ADDR_START, - pa_crop->left, &ret); + crop->left, &ret); cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_Y_ADDR_START, - pa_crop->top, &ret); + crop->top, &ret); cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_X_ADDR_END, - pa_crop->width + pa_crop->left - 1, &ret); + crop->width + crop->left - 1, &ret); cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_Y_ADDR_END, - pa_crop->height + pa_crop->top - 1, &ret); + crop->height + crop->top - 1, &ret); cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CFG_CPIPE_LAST_ROW, - (pa_crop->height - 4) / vratio - 1, &ret); + (crop->height - 4) / vratio - 1, &ret); read_mode &= ~(MT9M114_CAM_SENSOR_CONTROL_X_READ_OUT_MASK | MT9M114_CAM_SENSOR_CONTROL_Y_READ_OUT_MASK); @@ -845,6 +838,29 @@ static int mt9m114_configure(struct mt9m114 *sensor, cci_write(sensor->regmap, MT9M114_CAM_SENSOR_CONTROL_READ_MODE, read_mode, &ret); + return ret; +} + +static int mt9m114_configure_ifp(struct mt9m114 *sensor, + struct v4l2_subdev_state *state) +{ + const struct mt9m114_format_info *info; + const struct v4l2_mbus_framefmt *format; + const struct v4l2_rect *crop; + const struct v4l2_rect *compose; + u64 output_format; + int ret = 0; + + format = v4l2_subdev_state_get_format(state, 1); + info = mt9m114_format_info(sensor, 1, format->code); + crop = v4l2_subdev_state_get_crop(state, 0); + compose = v4l2_subdev_state_get_compose(state, 0); + + ret = cci_read(sensor->regmap, MT9M114_CAM_OUTPUT_FORMAT, + &output_format, NULL); + if (ret < 0) + return ret; + /* * Color pipeline (IFP) cropping and scaling. Subtract 4 from the left * and top coordinates to compensate for the lines and columns removed @@ -852,18 +868,18 @@ static int mt9m114_configure(struct mt9m114 *sensor, * not in the hardware. */ cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_XOFFSET, - ifp_crop->left - 4, &ret); + crop->left - 4, &ret); cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_YOFFSET, - ifp_crop->top - 4, &ret); + crop->top - 4, &ret); cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_WIDTH, - ifp_crop->width, &ret); + crop->width, &ret); cci_write(sensor->regmap, MT9M114_CAM_CROP_WINDOW_HEIGHT, - ifp_crop->height, &ret); + crop->height, &ret); cci_write(sensor->regmap, MT9M114_CAM_OUTPUT_WIDTH, - ifp_compose->width, &ret); + compose->width, &ret); cci_write(sensor->regmap, MT9M114_CAM_OUTPUT_HEIGHT, - ifp_compose->height, &ret); + compose->height, &ret); /* AWB and AE windows, use the full frame. */ cci_write(sensor->regmap, MT9M114_CAM_STAT_AWB_CLIP_WINDOW_XSTART, @@ -871,18 +887,18 @@ static int mt9m114_configure(struct mt9m114 *sensor, cci_write(sensor->regmap, MT9M114_CAM_STAT_AWB_CLIP_WINDOW_YSTART, 0, &ret); cci_write(sensor->regmap, MT9M114_CAM_STAT_AWB_CLIP_WINDOW_XEND, - ifp_compose->width - 1, &ret); + compose->width - 1, &ret); cci_write(sensor->regmap, MT9M114_CAM_STAT_AWB_CLIP_WINDOW_YEND, - ifp_compose->height - 1, &ret); + compose->height - 1, &ret); cci_write(sensor->regmap, MT9M114_CAM_STAT_AE_INITIAL_WINDOW_XSTART, 0, &ret); cci_write(sensor->regmap, MT9M114_CAM_STAT_AE_INITIAL_WINDOW_YSTART, 0, &ret); cci_write(sensor->regmap, MT9M114_CAM_STAT_AE_INITIAL_WINDOW_XEND, - ifp_compose->width / 5 - 1, &ret); + compose->width / 5 - 1, &ret); cci_write(sensor->regmap, MT9M114_CAM_STAT_AE_INITIAL_WINDOW_YEND, - ifp_compose->height / 5 - 1, &ret); + compose->height / 5 - 1, &ret); cci_write(sensor->regmap, MT9M114_CAM_CROP_CROPMODE, MT9M114_CAM_CROP_MODE_AWB_AUTO_CROP_EN | @@ -894,7 +910,7 @@ static int mt9m114_configure(struct mt9m114 *sensor, MT9M114_CAM_OUTPUT_FORMAT_FORMAT_MASK | MT9M114_CAM_OUTPUT_FORMAT_SWAP_BYTES | MT9M114_CAM_OUTPUT_FORMAT_SWAP_RED_BLUE); - output_format |= ifp_info->output_format; + output_format |= info->output_format; cci_write(sensor->regmap, MT9M114_CAM_OUTPUT_FORMAT, output_format, &ret); @@ -925,7 +941,11 @@ static int mt9m114_start_streaming(struct mt9m114 *sensor, if (ret) return ret; - ret = mt9m114_configure(sensor, pa_state, ifp_state); + ret = mt9m114_configure_ifp(sensor, ifp_state); + if (ret) + goto error; + + ret = mt9m114_configure_pa(sensor, pa_state); if (ret) goto error; @@ -1599,13 +1619,9 @@ static int mt9m114_ifp_get_frame_interval(struct v4l2_subdev *sd, if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; - mutex_lock(sensor->ifp.hdl.lock); - ival->numerator = 1; ival->denominator = sensor->ifp.frame_rate; - mutex_unlock(sensor->ifp.hdl.lock); - return 0; } @@ -1624,8 +1640,6 @@ static int mt9m114_ifp_set_frame_interval(struct v4l2_subdev *sd, if (interval->which != V4L2_SUBDEV_FORMAT_ACTIVE) return -EINVAL; - mutex_lock(sensor->ifp.hdl.lock); - if (ival->numerator != 0 && ival->denominator != 0) sensor->ifp.frame_rate = min_t(unsigned int, ival->denominator / ival->numerator, @@ -1639,8 +1653,6 @@ static int mt9m114_ifp_set_frame_interval(struct v4l2_subdev *sd, if (sensor->streaming) ret = mt9m114_set_frame_rate(sensor); - mutex_unlock(sensor->ifp.hdl.lock); - return ret; } @@ -2235,9 +2247,22 @@ static const struct dev_pm_ops mt9m114_pm_ops = { * Probe & Remove */ +static int mt9m114_verify_link_frequency(struct mt9m114 *sensor, + unsigned int pixrate) +{ + unsigned int link_freq = sensor->bus_cfg.bus_type == V4L2_MBUS_CSI2_DPHY + ? pixrate * 8 : pixrate * 2; + + if (sensor->bus_cfg.nr_of_link_frequencies != 1 || + sensor->bus_cfg.link_frequencies[0] != link_freq) + return -EINVAL; + + return 0; +} + static int mt9m114_clk_init(struct mt9m114 *sensor) { - unsigned int link_freq; + unsigned int pixrate; /* Hardcode the PLL multiplier and dividers to default settings. */ sensor->pll.m = 32; @@ -2249,19 +2274,29 @@ static int mt9m114_clk_init(struct mt9m114 *sensor) * for 16-bit per pixel, transmitted in DDR over a single lane. For * parallel mode, the sensor ouputs one pixel in two PIXCLK cycles. */ - sensor->pixrate = clk_get_rate(sensor->clk) * sensor->pll.m - / ((sensor->pll.n + 1) * (sensor->pll.p + 1)); - link_freq = sensor->bus_cfg.bus_type == V4L2_MBUS_CSI2_DPHY - ? sensor->pixrate * 8 : sensor->pixrate * 2; + /* + * Check if EXTCLK fits the configured link frequency. Bypass the PLL + * in this case. + */ + pixrate = clk_get_rate(sensor->clk) / 2; + if (mt9m114_verify_link_frequency(sensor, pixrate) == 0) { + sensor->pixrate = pixrate; + sensor->bypass_pll = true; + return 0; + } - if (sensor->bus_cfg.nr_of_link_frequencies != 1 || - sensor->bus_cfg.link_frequencies[0] != link_freq) { - dev_err(&sensor->client->dev, "Unsupported DT link-frequencies\n"); - return -EINVAL; + /* Check if the PLL configuration fits the configured link frequency. */ + pixrate = clk_get_rate(sensor->clk) * sensor->pll.m + / ((sensor->pll.n + 1) * (sensor->pll.p + 1)); + if (mt9m114_verify_link_frequency(sensor, pixrate) == 0) { + sensor->pixrate = pixrate; + sensor->bypass_pll = false; + return 0; } - return 0; + dev_err(&sensor->client->dev, "Unsupported DT link-frequencies\n"); + return -EINVAL; } static int mt9m114_identify(struct mt9m114 *sensor) diff --git a/drivers/media/i2c/ov2659.c b/drivers/media/i2c/ov2659.c index 06b7896c3eaf..586b31ba076b 100644 --- a/drivers/media/i2c/ov2659.c +++ b/drivers/media/i2c/ov2659.c @@ -1469,14 +1469,15 @@ static int ov2659_probe(struct i2c_client *client) V4L2_CID_TEST_PATTERN, ARRAY_SIZE(ov2659_test_pattern_menu) - 1, 0, 0, ov2659_test_pattern_menu); - ov2659->sd.ctrl_handler = &ov2659->ctrls; if (ov2659->ctrls.error) { dev_err(&client->dev, "%s: control initialization error %d\n", __func__, ov2659->ctrls.error); + v4l2_ctrl_handler_free(&ov2659->ctrls); return ov2659->ctrls.error; } + ov2659->sd.ctrl_handler = &ov2659->ctrls; sd = &ov2659->sd; client->flags |= I2C_CLIENT_SCCB; diff --git a/drivers/media/i2c/ov2740.c b/drivers/media/i2c/ov2740.c index 6cf461e3373c..4e959534e6e7 100644 --- a/drivers/media/i2c/ov2740.c +++ b/drivers/media/i2c/ov2740.c @@ -766,11 +766,9 @@ static int ov2740_init_controls(struct ov2740 *ov2740) { struct i2c_client *client = v4l2_get_subdevdata(&ov2740->sd); struct v4l2_ctrl_handler *ctrl_hdlr; - const struct ov2740_mode *cur_mode; s64 exposure_max, h_blank, pixel_rate; u32 vblank_min, vblank_max, vblank_default; struct v4l2_fwnode_device_properties props; - int size; int ret; ctrl_hdlr = &ov2740->ctrl_handler; @@ -778,12 +776,10 @@ static int ov2740_init_controls(struct ov2740 *ov2740) if (ret) return ret; - cur_mode = ov2740->cur_mode; - size = ARRAY_SIZE(link_freq_menu_items); - ov2740->link_freq = v4l2_ctrl_new_int_menu(ctrl_hdlr, &ov2740_ctrl_ops, - V4L2_CID_LINK_FREQ, size - 1, + V4L2_CID_LINK_FREQ, + ARRAY_SIZE(link_freq_menu_items) - 1, ov2740->supported_modes->link_freq_index, link_freq_menu_items); if (ov2740->link_freq) @@ -794,14 +790,14 @@ static int ov2740_init_controls(struct ov2740 *ov2740) V4L2_CID_PIXEL_RATE, 0, pixel_rate, 1, pixel_rate); - vblank_min = cur_mode->vts_min - cur_mode->height; - vblank_max = cur_mode->vts_max - cur_mode->height; - vblank_default = cur_mode->vts_def - cur_mode->height; + vblank_min = ov2740->cur_mode->vts_min - ov2740->cur_mode->height; + vblank_max = ov2740->cur_mode->vts_max - ov2740->cur_mode->height; + vblank_default = ov2740->cur_mode->vts_def - ov2740->cur_mode->height; ov2740->vblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, V4L2_CID_VBLANK, vblank_min, vblank_max, 1, vblank_default); - h_blank = cur_mode->hts - cur_mode->width; + h_blank = ov2740->cur_mode->hts - ov2740->cur_mode->width; ov2740->hblank = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, V4L2_CID_HBLANK, h_blank, h_blank, 1, h_blank); @@ -814,7 +810,7 @@ static int ov2740_init_controls(struct ov2740 *ov2740) v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, V4L2_CID_DIGITAL_GAIN, OV2740_DGTL_GAIN_MIN, OV2740_DGTL_GAIN_MAX, OV2740_DGTL_GAIN_STEP, OV2740_DGTL_GAIN_DEFAULT); - exposure_max = cur_mode->vts_def - OV2740_EXPOSURE_MAX_MARGIN; + exposure_max = ov2740->cur_mode->vts_def - OV2740_EXPOSURE_MAX_MARGIN; ov2740->exposure = v4l2_ctrl_new_std(ctrl_hdlr, &ov2740_ctrl_ops, V4L2_CID_EXPOSURE, OV2740_EXPOSURE_MIN, exposure_max, diff --git a/drivers/media/i2c/ov5670.c b/drivers/media/i2c/ov5670.c index c54bbc207189..b9efb2d2276a 100644 --- a/drivers/media/i2c/ov5670.c +++ b/drivers/media/i2c/ov5670.c @@ -2688,10 +2688,15 @@ static int ov5670_probe(struct i2c_client *client) if (ret) return dev_err_probe(&client->dev, ret, "GPIO probe failed\n"); - /* Graph Endpoint */ + /* + * Graph Endpoint. If it's missing we defer rather than fail, as this + * sensor is known to co-exist on systems with the IPU3 and so it might + * be created by the ipu-bridge. + */ handle = fwnode_graph_get_next_endpoint(dev_fwnode(&client->dev), NULL); if (!handle) - return dev_err_probe(&client->dev, -ENXIO, "Endpoint for node get failed\n"); + return dev_err_probe(&client->dev, -EPROBE_DEFER, + "Endpoint for node get failed\n"); ov5670->endpoint.bus_type = V4L2_MBUS_CSI2_DPHY; ov5670->endpoint.bus.mipi_csi2.num_data_lanes = 2; diff --git a/drivers/media/i2c/ov5693.c b/drivers/media/i2c/ov5693.c index 46b9ce111676..485efd15257e 100644 --- a/drivers/media/i2c/ov5693.c +++ b/drivers/media/i2c/ov5693.c @@ -1222,9 +1222,14 @@ static int ov5693_check_hwcfg(struct ov5693_device *ov5693) unsigned int i; int ret; + /* + * Sometimes the fwnode graph is initialized by the bridge driver + * Bridge drivers doing this may also add GPIO mappings, wait for this. + */ endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL); if (!endpoint) - return -EPROBE_DEFER; /* Could be provided by cio2-bridge */ + return dev_err_probe(ov5693->dev, -EPROBE_DEFER, + "waiting for fwnode graph endpoint\n"); ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg); fwnode_handle_put(endpoint); diff --git a/drivers/media/i2c/ov7251.c b/drivers/media/i2c/ov7251.c index 3226888d77e9..31a42d81e970 100644 --- a/drivers/media/i2c/ov7251.c +++ b/drivers/media/i2c/ov7251.c @@ -1486,9 +1486,14 @@ static int ov7251_check_hwcfg(struct ov7251 *ov7251) unsigned int i, j; int ret; + /* + * Sometimes the fwnode graph is initialized by the bridge driver + * Bridge drivers doing this may also add GPIO mappings, wait for this. + */ endpoint = fwnode_graph_get_next_endpoint(fwnode, NULL); if (!endpoint) - return -EPROBE_DEFER; /* could be provided by cio2-bridge */ + return dev_err_probe(ov7251->dev, -EPROBE_DEFER, + "waiting for fwnode graph endpoint\n"); ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg); fwnode_handle_put(endpoint); diff --git a/drivers/media/i2c/ov8865.c b/drivers/media/i2c/ov8865.c index 95ffe7536aa6..a2138f7988aa 100644 --- a/drivers/media/i2c/ov8865.c +++ b/drivers/media/i2c/ov8865.c @@ -2991,7 +2991,8 @@ static int ov8865_probe(struct i2c_client *client) handle = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL); if (!handle) - return -EPROBE_DEFER; + return dev_err_probe(dev, -EPROBE_DEFER, + "waiting for fwnode graph endpoint\n"); sensor->endpoint.bus_type = V4L2_MBUS_CSI2_DPHY; diff --git a/drivers/media/i2c/saa7115.c b/drivers/media/i2c/saa7115.c index a1c71187e773..b8b8f206ec3a 100644 --- a/drivers/media/i2c/saa7115.c +++ b/drivers/media/i2c/saa7115.c @@ -25,6 +25,7 @@ #include "saa711x_regs.h" +#include <linux/bitops.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/slab.h> @@ -664,15 +665,6 @@ static const unsigned char saa7115_init_misc[] = { 0x00, 0x00 }; -static int saa711x_odd_parity(u8 c) -{ - c ^= (c >> 4); - c ^= (c >> 2); - c ^= (c >> 1); - - return c & 1; -} - static int saa711x_decode_vps(u8 *dst, u8 *p) { static const u8 biphase_tbl[] = { @@ -1227,7 +1219,7 @@ static int saa711x_decode_vbi_line(struct v4l2_subdev *sd, struct v4l2_decode_vb vbi->type = V4L2_SLICED_TELETEXT_B; break; case 4: - if (!saa711x_odd_parity(p[0]) || !saa711x_odd_parity(p[1])) + if (!parity8(p[0]) || !parity8(p[1])) return 0; vbi->type = V4L2_SLICED_CAPTION_525; break; diff --git a/drivers/media/i2c/tc358743.c b/drivers/media/i2c/tc358743.c index dcef93e1a3bc..1cc7636e446d 100644 --- a/drivers/media/i2c/tc358743.c +++ b/drivers/media/i2c/tc358743.c @@ -114,7 +114,7 @@ static inline struct tc358743_state *to_state(struct v4l2_subdev *sd) /* --------------- I2C --------------- */ -static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) +static int i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) { struct tc358743_state *state = to_state(sd); struct i2c_client *client = state->i2c_client; @@ -140,6 +140,7 @@ static void i2c_rd(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) v4l2_err(sd, "%s: reading register 0x%x from 0x%x failed: %d\n", __func__, reg, client->addr, err); } + return err != ARRAY_SIZE(msgs); } static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) @@ -196,15 +197,24 @@ static void i2c_wr(struct v4l2_subdev *sd, u16 reg, u8 *values, u32 n) } } -static noinline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n) +static noinline u32 i2c_rdreg_err(struct v4l2_subdev *sd, u16 reg, u32 n, + int *err) { + int error; __le32 val = 0; - i2c_rd(sd, reg, (u8 __force *)&val, n); + error = i2c_rd(sd, reg, (u8 __force *)&val, n); + if (err) + *err = error; return le32_to_cpu(val); } +static inline u32 i2c_rdreg(struct v4l2_subdev *sd, u16 reg, u32 n) +{ + return i2c_rdreg_err(sd, reg, n, NULL); +} + static noinline void i2c_wrreg(struct v4l2_subdev *sd, u16 reg, u32 val, u32 n) { __le32 raw = cpu_to_le32(val); @@ -233,6 +243,13 @@ static u16 i2c_rd16(struct v4l2_subdev *sd, u16 reg) return i2c_rdreg(sd, reg, 2); } +static int i2c_rd16_err(struct v4l2_subdev *sd, u16 reg, u16 *value) +{ + int err; + *value = i2c_rdreg_err(sd, reg, 2, &err); + return err; +} + static void i2c_wr16(struct v4l2_subdev *sd, u16 reg, u16 val) { i2c_wrreg(sd, reg, val, 2); @@ -420,9 +437,9 @@ static void tc358743_enable_edid(struct v4l2_subdev *sd) v4l2_dbg(2, debug, sd, "%s:\n", __func__); - /* Enable hotplug after 100 ms. DDC access to EDID is also enabled when + /* Enable hotplug after 143 ms. DDC access to EDID is also enabled when * hotplug is enabled. See register DDC_CTL */ - schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 10); + schedule_delayed_work(&state->delayed_work_enable_hotplug, HZ / 7); tc358743_enable_interrupts(sd, true); tc358743_s_ctrl_detect_tx_5v(sd); @@ -1505,7 +1522,7 @@ static irqreturn_t tc358743_irq_handler(int irq, void *dev_id) static void tc358743_irq_poll_timer(struct timer_list *t) { - struct tc358743_state *state = from_timer(state, t, timer); + struct tc358743_state *state = timer_container_of(state, t, timer); unsigned int msecs; schedule_work(&state->work_i2c_poll); @@ -1691,12 +1708,23 @@ static int tc358743_enum_mbus_code(struct v4l2_subdev *sd, return 0; } +static u32 tc358743_g_colorspace(u32 code) +{ + switch (code) { + case MEDIA_BUS_FMT_RGB888_1X24: + return V4L2_COLORSPACE_SRGB; + case MEDIA_BUS_FMT_UYVY8_1X16: + return V4L2_COLORSPACE_SMPTE170M; + default: + return 0; + } +} + static int tc358743_get_fmt(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state, struct v4l2_subdev_format *format) { struct tc358743_state *state = to_state(sd); - u8 vi_rep = i2c_rd8(sd, VI_REP); if (format->pad != 0) return -EINVAL; @@ -1706,23 +1734,7 @@ static int tc358743_get_fmt(struct v4l2_subdev *sd, format->format.height = state->timings.bt.height; format->format.field = V4L2_FIELD_NONE; - switch (vi_rep & MASK_VOUT_COLOR_SEL) { - case MASK_VOUT_COLOR_RGB_FULL: - case MASK_VOUT_COLOR_RGB_LIMITED: - format->format.colorspace = V4L2_COLORSPACE_SRGB; - break; - case MASK_VOUT_COLOR_601_YCBCR_LIMITED: - case MASK_VOUT_COLOR_601_YCBCR_FULL: - format->format.colorspace = V4L2_COLORSPACE_SMPTE170M; - break; - case MASK_VOUT_COLOR_709_YCBCR_FULL: - case MASK_VOUT_COLOR_709_YCBCR_LIMITED: - format->format.colorspace = V4L2_COLORSPACE_REC709; - break; - default: - format->format.colorspace = 0; - break; - } + format->format.colorspace = tc358743_g_colorspace(format->format.code); return 0; } @@ -1736,19 +1748,14 @@ static int tc358743_set_fmt(struct v4l2_subdev *sd, u32 code = format->format.code; /* is overwritten by get_fmt */ int ret = tc358743_get_fmt(sd, sd_state, format); - format->format.code = code; + if (code == MEDIA_BUS_FMT_RGB888_1X24 || + code == MEDIA_BUS_FMT_UYVY8_1X16) + format->format.code = code; + format->format.colorspace = tc358743_g_colorspace(format->format.code); if (ret) return ret; - switch (code) { - case MEDIA_BUS_FMT_RGB888_1X24: - case MEDIA_BUS_FMT_UYVY8_1X16: - break; - default: - return -EINVAL; - } - if (format->which == V4L2_SUBDEV_FORMAT_TRY) return 0; @@ -1972,8 +1979,19 @@ static int tc358743_probe_of(struct tc358743_state *state) state->pdata.refclk_hz = clk_get_rate(refclk); state->pdata.ddc5v_delay = DDC5V_DELAY_100_MS; state->pdata.enable_hdcp = false; - /* A FIFO level of 16 should be enough for 2-lane 720p60 at 594 MHz. */ - state->pdata.fifo_level = 16; + /* + * Ideally the FIFO trigger level should be set based on the input and + * output data rates, but the calculations required are buried in + * Toshiba's register settings spreadsheet. + * A value of 16 works with a 594Mbps data rate for 720p60 (using 2 + * lanes) and 1080p60 (using 4 lanes), but fails when the data rate + * is increased, or a lower pixel clock is used that result in CSI + * reading out faster than the data is arriving. + * + * A value of 374 works with both those modes at 594Mbps, and with most + * modes on 972Mbps. + */ + state->pdata.fifo_level = 374; /* * The PLL input clock is obtained by dividing refclk by pll_prd. * It must be between 6 MHz and 40 MHz, lower frequency is better. @@ -1993,6 +2011,7 @@ static int tc358743_probe_of(struct tc358743_state *state) /* * The CSI bps per lane must be between 62.5 Mbps and 1 Gbps. * The default is 594 Mbps for 4-lane 1080p60 or 2-lane 720p60. + * 972 Mbps allows 1080P50 UYVY over 2-lane. */ bps_pr_lane = 2 * endpoint.link_frequencies[0]; if (bps_pr_lane < 62500000U || bps_pr_lane > 1000000000U) { @@ -2006,23 +2025,42 @@ static int tc358743_probe_of(struct tc358743_state *state) state->pdata.refclk_hz * state->pdata.pll_prd; /* - * FIXME: These timings are from REF_02 for 594 Mbps per lane (297 MHz - * link frequency). In principle it should be possible to calculate + * FIXME: These timings are from REF_02 for 594 or 972 Mbps per lane + * (297 MHz or 486 MHz link frequency). + * In principle it should be possible to calculate * them based on link frequency and resolution. */ - if (bps_pr_lane != 594000000U) + switch (bps_pr_lane) { + default: dev_warn(dev, "untested bps per lane: %u bps\n", bps_pr_lane); - state->pdata.lineinitcnt = 0xe80; - state->pdata.lptxtimecnt = 0x003; - /* tclk-preparecnt: 3, tclk-zerocnt: 20 */ - state->pdata.tclk_headercnt = 0x1403; - state->pdata.tclk_trailcnt = 0x00; - /* ths-preparecnt: 3, ths-zerocnt: 1 */ - state->pdata.ths_headercnt = 0x0103; - state->pdata.twakeup = 0x4882; - state->pdata.tclk_postcnt = 0x008; - state->pdata.ths_trailcnt = 0x2; - state->pdata.hstxvregcnt = 0; + fallthrough; + case 594000000U: + state->pdata.lineinitcnt = 0xe80; + state->pdata.lptxtimecnt = 0x003; + /* tclk-preparecnt: 3, tclk-zerocnt: 20 */ + state->pdata.tclk_headercnt = 0x1403; + state->pdata.tclk_trailcnt = 0x00; + /* ths-preparecnt: 3, ths-zerocnt: 1 */ + state->pdata.ths_headercnt = 0x0103; + state->pdata.twakeup = 0x4882; + state->pdata.tclk_postcnt = 0x008; + state->pdata.ths_trailcnt = 0x2; + state->pdata.hstxvregcnt = 0; + break; + case 972000000U: + state->pdata.lineinitcnt = 0x1b58; + state->pdata.lptxtimecnt = 0x007; + /* tclk-preparecnt: 6, tclk-zerocnt: 40 */ + state->pdata.tclk_headercnt = 0x2806; + state->pdata.tclk_trailcnt = 0x00; + /* ths-preparecnt: 6, ths-zerocnt: 8 */ + state->pdata.ths_headercnt = 0x0806; + state->pdata.twakeup = 0x4268; + state->pdata.tclk_postcnt = 0x008; + state->pdata.ths_trailcnt = 0x5; + state->pdata.hstxvregcnt = 0; + break; + } state->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW); @@ -2061,6 +2099,7 @@ static int tc358743_probe(struct i2c_client *client) struct tc358743_platform_data *pdata = client->dev.platform_data; struct v4l2_subdev *sd; u16 irq_mask = MASK_HDMI_MSK | MASK_CSI_MSK; + u16 chipid; int err; if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_BYTE_DATA)) @@ -2092,7 +2131,8 @@ static int tc358743_probe(struct i2c_client *client) sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_HAS_EVENTS; /* i2c access */ - if ((i2c_rd16(sd, CHIPID) & MASK_CHIPID) != 0) { + if (i2c_rd16_err(sd, CHIPID, &chipid) || + (chipid & MASK_CHIPID) != 0) { v4l2_info(sd, "not a TC358743 on address 0x%x\n", client->addr << 1); return -ENODEV; diff --git a/drivers/media/i2c/tda1997x.c b/drivers/media/i2c/tda1997x.c index 959590afc80f..1087d2bddaf2 100644 --- a/drivers/media/i2c/tda1997x.c +++ b/drivers/media/i2c/tda1997x.c @@ -589,8 +589,8 @@ static void tda1997x_enable_edid(struct v4l2_subdev *sd) v4l2_dbg(1, debug, sd, "%s\n", __func__); - /* Enable hotplug after 100ms */ - schedule_delayed_work(&state->delayed_work_enable_hpd, HZ / 10); + /* Enable hotplug after 143ms */ + schedule_delayed_work(&state->delayed_work_enable_hpd, HZ / 7); } /* ----------------------------------------------------------------------------- diff --git a/drivers/media/i2c/tvaudio.c b/drivers/media/i2c/tvaudio.c index 42115118a0bd..6267e9ad39c0 100644 --- a/drivers/media/i2c/tvaudio.c +++ b/drivers/media/i2c/tvaudio.c @@ -318,7 +318,7 @@ static int chip_cmd(struct CHIPSTATE *chip, char *name, audiocmd *cmd) static void chip_thread_wake(struct timer_list *t) { - struct CHIPSTATE *chip = from_timer(chip, t, wt); + struct CHIPSTATE *chip = timer_container_of(chip, t, wt); wake_up_process(chip->thread); } diff --git a/drivers/media/i2c/vd55g1.c b/drivers/media/i2c/vd55g1.c index 25e2fc88a036..c0754fd03b1d 100644 --- a/drivers/media/i2c/vd55g1.c +++ b/drivers/media/i2c/vd55g1.c @@ -111,9 +111,9 @@ #define VD55G1_WIDTH 804 #define VD55G1_HEIGHT 704 -#define VD55G1_DEFAULT_MODE 0 +#define VD55G1_MODE_DEF 0 #define VD55G1_NB_GPIOS 4 -#define VD55G1_MEDIA_BUS_FMT_DEF MEDIA_BUS_FMT_Y8_1X8 +#define VD55G1_MBUS_CODE_DEF 0 #define VD55G1_DGAIN_DEF 256 #define VD55G1_AGAIN_DEF 19 #define VD55G1_EXPO_MAX_TERM 64 @@ -129,8 +129,8 @@ #define VD55G1_FWPATCH_REVISION_MINOR 9 #define VD55G1_XCLK_FREQ_MIN (6 * HZ_PER_MHZ) #define VD55G1_XCLK_FREQ_MAX (27 * HZ_PER_MHZ) -#define VD55G1_MIPI_RATE_MIN (250 * HZ_PER_MHZ) -#define VD55G1_MIPI_RATE_MAX (1200 * HZ_PER_MHZ) +#define VD55G1_MIPI_RATE_MIN (250 * MEGA) +#define VD55G1_MIPI_RATE_MAX (1200 * MEGA) static const u8 patch_array[] = { 0x44, 0x03, 0x09, 0x02, 0xe6, 0x01, 0x42, 0x00, 0xea, 0x01, 0x42, 0x00, @@ -883,10 +883,9 @@ static int vd55g1_apply_cold_start(struct vd55g1 *sensor, return ret; } -static void vd55g1_update_img_pad_format(struct vd55g1 *sensor, - const struct vd55g1_mode *mode, - u32 code, - struct v4l2_mbus_framefmt *fmt) +static void vd55g1_update_pad_fmt(struct vd55g1 *sensor, + const struct vd55g1_mode *mode, u32 code, + struct v4l2_mbus_framefmt *fmt) { fmt->code = code; fmt->width = mode->width; @@ -1038,8 +1037,6 @@ static int vd55g1_enable_streams(struct v4l2_subdev *sd, if (ret < 0) return ret; - vd55g1_write(sensor, VD55G1_REG_EXT_CLOCK, sensor->xclk_freq, &ret); - /* Configure output */ vd55g1_write(sensor, VD55G1_REG_MIPI_DATA_RATE, sensor->mipi_rate, &ret); @@ -1084,7 +1081,7 @@ static int vd55g1_enable_streams(struct v4l2_subdev *sd, err_rpm_put: pm_runtime_put(sensor->dev); - return 0; + return -EINVAL; } static int vd55g1_disable_streams(struct v4l2_subdev *sd, @@ -1231,8 +1228,8 @@ static int vd55g1_set_pad_fmt(struct v4l2_subdev *sd, width, height, sd_fmt->format.width, sd_fmt->format.height); - vd55g1_update_img_pad_format(sensor, new_mode, sd_fmt->format.code, - &sd_fmt->format); + vd55g1_update_pad_fmt(sensor, new_mode, sd_fmt->format.code, + &sd_fmt->format); /* * Use binning to maximize the crop rectangle size, and centre it in the @@ -1262,7 +1259,6 @@ static int vd55g1_set_pad_fmt(struct v4l2_subdev *sd, static int vd55g1_init_state(struct v4l2_subdev *sd, struct v4l2_subdev_state *sd_state) { - unsigned int def_mode = VD55G1_DEFAULT_MODE; struct vd55g1 *sensor = to_vd55g1(sd); struct v4l2_subdev_format fmt = { 0 }; struct v4l2_subdev_route routes[] = { @@ -1279,8 +1275,9 @@ static int vd55g1_init_state(struct v4l2_subdev *sd, if (ret) return ret; - vd55g1_update_img_pad_format(sensor, &vd55g1_supported_modes[def_mode], - VD55G1_MEDIA_BUS_FMT_DEF, &fmt.format); + vd55g1_update_pad_fmt(sensor, &vd55g1_supported_modes[VD55G1_MODE_DEF], + vd55g1_mbus_codes[VD55G1_MBUS_CODE_DEF].code, + &fmt.format); return vd55g1_set_pad_fmt(sd, sd_state, &fmt); } @@ -1613,6 +1610,9 @@ static int vd55g1_power_on(struct device *dev) goto disable_clock; } + /* Setup clock now to advance through system FSM states */ + vd55g1_write(sensor, VD55G1_REG_EXT_CLOCK, sensor->xclk_freq, &ret); + ret = vd55g1_patch(sensor); if (ret) { dev_err(dev, "Sensor patch failed %d\n", ret); |