diff options
Diffstat (limited to 'drivers/misc/eeprom')
| -rw-r--r-- | drivers/misc/eeprom/Kconfig | 18 | ||||
| -rw-r--r-- | drivers/misc/eeprom/Makefile | 1 | ||||
| -rw-r--r-- | drivers/misc/eeprom/at25.c | 67 | ||||
| -rw-r--r-- | drivers/misc/eeprom/m24lr.c | 606 |
4 files changed, 661 insertions, 31 deletions
diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig index 0bef5b93bd6d..4d0ce47aa282 100644 --- a/drivers/misc/eeprom/Kconfig +++ b/drivers/misc/eeprom/Kconfig @@ -120,4 +120,22 @@ config EEPROM_EE1004 This driver can also be built as a module. If so, the module will be called ee1004. +config EEPROM_M24LR + tristate "STMicroelectronics M24LR RFID/NFC EEPROM support" + depends on I2C && SYSFS + select REGMAP_I2C + select NVMEM + select NVMEM_SYSFS + help + This enables support for STMicroelectronics M24LR RFID/NFC EEPROM + chips. These dual-interface devices expose two I2C addresses: + one for EEPROM memory access and another for control and system + configuration (e.g. UID, password handling). + + This driver provides a sysfs interface for control functions and + integrates with the nvmem subsystem for EEPROM access. + + To compile this driver as a module, choose M here: the + module will be called m24lr. + endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile index 65794e526d5d..8f311fd6a4ce 100644 --- a/drivers/misc/eeprom/Makefile +++ b/drivers/misc/eeprom/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_EEPROM_93XX46) += eeprom_93xx46.o obj-$(CONFIG_EEPROM_DIGSY_MTC_CFG) += digsy_mtc_eeprom.o obj-$(CONFIG_EEPROM_IDT_89HPESX) += idt_89hpesx.o obj-$(CONFIG_EEPROM_EE1004) += ee1004.o +obj-$(CONFIG_EEPROM_M24LR) += m24lr.o diff --git a/drivers/misc/eeprom/at25.c b/drivers/misc/eeprom/at25.c index 2d0492867054..e2868f7bdb03 100644 --- a/drivers/misc/eeprom/at25.c +++ b/drivers/misc/eeprom/at25.c @@ -379,37 +379,49 @@ static int at25_fram_to_chip(struct device *dev, struct spi_eeprom *chip) struct at25_data *at25 = container_of(chip, struct at25_data, chip); u8 sernum[FM25_SN_LEN]; u8 id[FM25_ID_LEN]; + u32 val; int i; strscpy(chip->name, "fm25", sizeof(chip->name)); - /* Get ID of chip */ - fm25_aux_read(at25, id, FM25_RDID, FM25_ID_LEN); - /* There are inside-out FRAM variations, detect them and reverse the ID bytes */ - if (id[6] == 0x7f && id[2] == 0xc2) - for (i = 0; i < ARRAY_SIZE(id) / 2; i++) { - u8 tmp = id[i]; - int j = ARRAY_SIZE(id) - i - 1; + if (!device_property_read_u32(dev, "size", &val)) { + chip->byte_len = val; + } else { + /* Get ID of chip */ + fm25_aux_read(at25, id, FM25_RDID, FM25_ID_LEN); + /* There are inside-out FRAM variations, detect them and reverse the ID bytes */ + if (id[6] == 0x7f && id[2] == 0xc2) + for (i = 0; i < ARRAY_SIZE(id) / 2; i++) { + u8 tmp = id[i]; + int j = ARRAY_SIZE(id) - i - 1; + + id[i] = id[j]; + id[j] = tmp; + } + if (id[6] != 0xc2) { + dev_err(dev, "Error: no Cypress FRAM with device ID (manufacturer ID bank 7: %02x)\n", id[6]); + return -ENODEV; + } - id[i] = id[j]; - id[j] = tmp; + switch (id[7]) { + case 0x21 ... 0x26: + chip->byte_len = BIT(id[7] - 0x21 + 4) * 1024; + break; + case 0x2a ... 0x30: + /* CY15B116QN ... CY15B116QN */ + chip->byte_len = BIT(((id[7] >> 1) & 0xf) + 13); + break; + default: + dev_err(dev, "Error: unsupported size (id %02x)\n", id[7]); + return -ENODEV; } - if (id[6] != 0xc2) { - dev_err(dev, "Error: no Cypress FRAM (id %02x)\n", id[6]); - return -ENODEV; - } - switch (id[7]) { - case 0x21 ... 0x26: - chip->byte_len = BIT(id[7] - 0x21 + 4) * 1024; - break; - case 0x2a ... 0x30: - /* CY15B116QN ... CY15B116QN */ - chip->byte_len = BIT(((id[7] >> 1) & 0xf) + 13); - break; - default: - dev_err(dev, "Error: unsupported size (id %02x)\n", id[7]); - return -ENODEV; + if (id[8]) { + fm25_aux_read(at25, sernum, FM25_RDSN, FM25_SN_LEN); + /* Swap byte order */ + for (i = 0; i < FM25_SN_LEN; i++) + at25->sernum[i] = sernum[FM25_SN_LEN - 1 - i]; + } } if (chip->byte_len > 64 * 1024) @@ -417,13 +429,6 @@ static int at25_fram_to_chip(struct device *dev, struct spi_eeprom *chip) else chip->flags |= EE_ADDR2; - if (id[8]) { - fm25_aux_read(at25, sernum, FM25_RDSN, FM25_SN_LEN); - /* Swap byte order */ - for (i = 0; i < FM25_SN_LEN; i++) - at25->sernum[i] = sernum[FM25_SN_LEN - 1 - i]; - } - chip->page_size = PAGE_SIZE; return 0; } diff --git a/drivers/misc/eeprom/m24lr.c b/drivers/misc/eeprom/m24lr.c new file mode 100644 index 000000000000..7a9fd45a8e46 --- /dev/null +++ b/drivers/misc/eeprom/m24lr.c @@ -0,0 +1,606 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * m24lr.c - Sysfs control interface for ST M24LR series RFID/NFC chips + * + * Copyright (c) 2025 Abd-Alrhman Masalkhi <abd.masalkhi@gmail.com> + * + * This driver implements both the sysfs-based control interface and EEPROM + * access for STMicroelectronics M24LR series chips (e.g., M24LR04E-R). + * It provides access to control registers for features such as password + * authentication, memory protection, and device configuration. In addition, + * it manages read and write operations to the EEPROM region of the chip. + */ + +#include <linux/device.h> +#include <linux/i2c.h> +#include <linux/module.h> +#include <linux/nvmem-provider.h> +#include <linux/of.h> +#include <linux/of_device.h> +#include <linux/regmap.h> + +#define M24LR_WRITE_TIMEOUT 25u +#define M24LR_READ_TIMEOUT (M24LR_WRITE_TIMEOUT) + +/** + * struct m24lr_chip - describes chip-specific sysfs layout + * @sss_len: the length of the sss region + * @page_size: chip-specific limit on the maximum number of bytes allowed + * in a single write operation. + * @eeprom_size: size of the EEPROM in byte + * + * Supports multiple M24LR chip variants (e.g., M24LRxx) by allowing each + * to define its own set of sysfs attributes, depending on its available + * registers and features. + */ +struct m24lr_chip { + unsigned int sss_len; + unsigned int page_size; + unsigned int eeprom_size; +}; + +/** + * struct m24lr - core driver data for M24LR chip control + * @uid: 64 bits unique identifier stored in the device + * @sss_len: the length of the sss region + * @page_size: chip-specific limit on the maximum number of bytes allowed + * in a single write operation. + * @eeprom_size: size of the EEPROM in byte + * @ctl_regmap: regmap interface for accessing the system parameter sector + * @eeprom_regmap: regmap interface for accessing the EEPROM + * @lock: mutex to synchronize operations to the device + * + * Central data structure holding the state and resources used by the + * M24LR device driver. + */ +struct m24lr { + u64 uid; + unsigned int sss_len; + unsigned int page_size; + unsigned int eeprom_size; + struct regmap *ctl_regmap; + struct regmap *eeprom_regmap; + struct mutex lock; /* synchronize operations to the device */ +}; + +static const struct regmap_range m24lr_ctl_vo_ranges[] = { + regmap_reg_range(0, 63), +}; + +static const struct regmap_access_table m24lr_ctl_vo_table = { + .yes_ranges = m24lr_ctl_vo_ranges, + .n_yes_ranges = ARRAY_SIZE(m24lr_ctl_vo_ranges), +}; + +static const struct regmap_config m24lr_ctl_regmap_conf = { + .name = "m24lr_ctl", + .reg_stride = 1, + .reg_bits = 16, + .val_bits = 8, + .disable_locking = false, + .cache_type = REGCACHE_RBTREE,/* Flat can't be used, there's huge gap */ + .volatile_table = &m24lr_ctl_vo_table, +}; + +/* Chip descriptor for M24LR04E-R variant */ +static const struct m24lr_chip m24lr04e_r_chip = { + .page_size = 4, + .eeprom_size = 512, + .sss_len = 4, +}; + +/* Chip descriptor for M24LR16E-R variant */ +static const struct m24lr_chip m24lr16e_r_chip = { + .page_size = 4, + .eeprom_size = 2048, + .sss_len = 16, +}; + +/* Chip descriptor for M24LR64E-R variant */ +static const struct m24lr_chip m24lr64e_r_chip = { + .page_size = 4, + .eeprom_size = 8192, + .sss_len = 64, +}; + +static const struct i2c_device_id m24lr_ids[] = { + { "m24lr04e-r", (kernel_ulong_t)&m24lr04e_r_chip}, + { "m24lr16e-r", (kernel_ulong_t)&m24lr16e_r_chip}, + { "m24lr64e-r", (kernel_ulong_t)&m24lr64e_r_chip}, + { } +}; +MODULE_DEVICE_TABLE(i2c, m24lr_ids); + +static const struct of_device_id m24lr_of_match[] = { + { .compatible = "st,m24lr04e-r", .data = &m24lr04e_r_chip}, + { .compatible = "st,m24lr16e-r", .data = &m24lr16e_r_chip}, + { .compatible = "st,m24lr64e-r", .data = &m24lr64e_r_chip}, + { } +}; +MODULE_DEVICE_TABLE(of, m24lr_of_match); + +/** + * m24lr_regmap_read - read data using regmap with retry on failure + * @regmap: regmap instance for the device + * @buf: buffer to store the read data + * @size: number of bytes to read + * @offset: starting register address + * + * Attempts to read a block of data from the device with retries and timeout. + * Some M24LR chips may transiently NACK reads (e.g., during internal write + * cycles), so this function retries with a short sleep until the timeout + * expires. + * + * Returns: + * Number of bytes read on success, + * -ETIMEDOUT if the read fails within the timeout window. + */ +static ssize_t m24lr_regmap_read(struct regmap *regmap, u8 *buf, + size_t size, unsigned int offset) +{ + int err; + unsigned long timeout, read_time; + ssize_t ret = -ETIMEDOUT; + + timeout = jiffies + msecs_to_jiffies(M24LR_READ_TIMEOUT); + do { + read_time = jiffies; + + err = regmap_bulk_read(regmap, offset, buf, size); + if (!err) { + ret = size; + break; + } + + usleep_range(1000, 2000); + } while (time_before(read_time, timeout)); + + return ret; +} + +/** + * m24lr_regmap_write - write data using regmap with retry on failure + * @regmap: regmap instance for the device + * @buf: buffer containing the data to write + * @size: number of bytes to write + * @offset: starting register address + * + * Attempts to write a block of data to the device with retries and a timeout. + * Some M24LR devices may NACK I2C writes while an internal write operation + * is in progress. This function retries the write operation with a short delay + * until it succeeds or the timeout is reached. + * + * Returns: + * Number of bytes written on success, + * -ETIMEDOUT if the write fails within the timeout window. + */ +static ssize_t m24lr_regmap_write(struct regmap *regmap, const u8 *buf, + size_t size, unsigned int offset) +{ + int err; + unsigned long timeout, write_time; + ssize_t ret = -ETIMEDOUT; + + timeout = jiffies + msecs_to_jiffies(M24LR_WRITE_TIMEOUT); + + do { + write_time = jiffies; + + err = regmap_bulk_write(regmap, offset, buf, size); + if (!err) { + ret = size; + break; + } + + usleep_range(1000, 2000); + } while (time_before(write_time, timeout)); + + return ret; +} + +static ssize_t m24lr_read(struct m24lr *m24lr, u8 *buf, size_t size, + unsigned int offset, bool is_eeprom) +{ + struct regmap *regmap; + ssize_t ret; + + if (is_eeprom) + regmap = m24lr->eeprom_regmap; + else + regmap = m24lr->ctl_regmap; + + mutex_lock(&m24lr->lock); + ret = m24lr_regmap_read(regmap, buf, size, offset); + mutex_unlock(&m24lr->lock); + + return ret; +} + +/** + * m24lr_write - write buffer to M24LR device with page alignment handling + * @m24lr: pointer to driver context + * @buf: data buffer to write + * @size: number of bytes to write + * @offset: target register address in the device + * @is_eeprom: true if the write should target the EEPROM, + * false if it should target the system parameters sector. + * + * Writes data to the M24LR device using regmap, split into chunks no larger + * than page_size to respect device-specific write limitations (e.g., page + * size or I2C hold-time concerns). Each chunk is aligned to the page boundary + * defined by page_size. + * + * Returns: + * Total number of bytes written on success, + * A negative error code if any write fails. + */ +static ssize_t m24lr_write(struct m24lr *m24lr, const u8 *buf, size_t size, + unsigned int offset, bool is_eeprom) +{ + unsigned int n, next_sector; + struct regmap *regmap; + ssize_t ret = 0; + ssize_t err; + + if (is_eeprom) + regmap = m24lr->eeprom_regmap; + else + regmap = m24lr->ctl_regmap; + + n = min_t(unsigned int, size, m24lr->page_size); + next_sector = roundup(offset + 1, m24lr->page_size); + if (offset + n > next_sector) + n = next_sector - offset; + + mutex_lock(&m24lr->lock); + while (n) { + err = m24lr_regmap_write(regmap, buf + offset, n, offset); + if (IS_ERR_VALUE(err)) { + if (!ret) + ret = err; + + break; + } + + offset += n; + size -= n; + ret += n; + n = min_t(unsigned int, size, m24lr->page_size); + } + mutex_unlock(&m24lr->lock); + + return ret; +} + +/** + * m24lr_write_pass - Write password to M24LR043-R using secure format + * @m24lr: Pointer to device control structure + * @buf: Input buffer containing hex-encoded password + * @count: Number of bytes in @buf + * @code: Operation code to embed between password copies + * + * This function parses a 4-byte password, encodes it in big-endian format, + * and constructs a 9-byte sequence of the form: + * + * [BE(password), code, BE(password)] + * + * The result is written to register 0x0900 (2304), which is the password + * register in M24LR04E-R chip. + * + * Return: Number of bytes written on success, or negative error code on failure + */ +static ssize_t m24lr_write_pass(struct m24lr *m24lr, const char *buf, + size_t count, u8 code) +{ + __be32 be_pass; + u8 output[9]; + ssize_t ret; + u32 pass; + int err; + + if (!count) + return -EINVAL; + + if (count > 8) + return -EINVAL; + + err = kstrtou32(buf, 16, &pass); + if (err) + return err; + + be_pass = cpu_to_be32(pass); + + memcpy(output, &be_pass, sizeof(be_pass)); + output[4] = code; + memcpy(output + 5, &be_pass, sizeof(be_pass)); + + mutex_lock(&m24lr->lock); + ret = m24lr_regmap_write(m24lr->ctl_regmap, output, 9, 2304); + mutex_unlock(&m24lr->lock); + + return ret; +} + +static ssize_t m24lr_read_reg_le(struct m24lr *m24lr, u64 *val, + unsigned int reg_addr, + unsigned int reg_size) +{ + ssize_t ret; + __le64 input = 0; + + ret = m24lr_read(m24lr, (u8 *)&input, reg_size, reg_addr, false); + if (IS_ERR_VALUE(ret)) + return ret; + + if (ret != reg_size) + return -EINVAL; + + switch (reg_size) { + case 1: + *val = *(u8 *)&input; + break; + case 2: + *val = le16_to_cpu((__le16)input); + break; + case 4: + *val = le32_to_cpu((__le32)input); + break; + case 8: + *val = le64_to_cpu((__le64)input); + break; + default: + return -EINVAL; + } + + return 0; +} + +static int m24lr_nvmem_read(void *priv, unsigned int offset, void *val, + size_t bytes) +{ + ssize_t err; + struct m24lr *m24lr = priv; + + if (!bytes) + return bytes; + + if (offset + bytes > m24lr->eeprom_size) + return -EINVAL; + + err = m24lr_read(m24lr, val, bytes, offset, true); + if (IS_ERR_VALUE(err)) + return err; + + return 0; +} + +static int m24lr_nvmem_write(void *priv, unsigned int offset, void *val, + size_t bytes) +{ + ssize_t err; + struct m24lr *m24lr = priv; + + if (!bytes) + return -EINVAL; + + if (offset + bytes > m24lr->eeprom_size) + return -EINVAL; + + err = m24lr_write(m24lr, val, bytes, offset, true); + if (IS_ERR_VALUE(err)) + return err; + + return 0; +} + +static ssize_t m24lr_ctl_sss_read(struct file *filep, struct kobject *kobj, + const struct bin_attribute *attr, char *buf, + loff_t offset, size_t count) +{ + struct m24lr *m24lr = attr->private; + + if (!count) + return count; + + if (size_add(offset, count) > m24lr->sss_len) + return -EINVAL; + + return m24lr_read(m24lr, buf, count, offset, false); +} + +static ssize_t m24lr_ctl_sss_write(struct file *filep, struct kobject *kobj, + const struct bin_attribute *attr, char *buf, + loff_t offset, size_t count) +{ + struct m24lr *m24lr = attr->private; + + if (!count) + return -EINVAL; + + if (size_add(offset, count) > m24lr->sss_len) + return -EINVAL; + + return m24lr_write(m24lr, buf, count, offset, false); +} +static BIN_ATTR(sss, 0600, m24lr_ctl_sss_read, m24lr_ctl_sss_write, 0); + +static ssize_t new_pass_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev)); + + return m24lr_write_pass(m24lr, buf, count, 7); +} +static DEVICE_ATTR_WO(new_pass); + +static ssize_t unlock_store(struct device *dev, struct device_attribute *attr, + const char *buf, size_t count) +{ + struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev)); + + return m24lr_write_pass(m24lr, buf, count, 9); +} +static DEVICE_ATTR_WO(unlock); + +static ssize_t uid_show(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev)); + + return sysfs_emit(buf, "%llx\n", m24lr->uid); +} +static DEVICE_ATTR_RO(uid); + +static ssize_t total_sectors_show(struct device *dev, + struct device_attribute *attr, char *buf) +{ + struct m24lr *m24lr = i2c_get_clientdata(to_i2c_client(dev)); + + return sysfs_emit(buf, "%x\n", m24lr->sss_len); +} +static DEVICE_ATTR_RO(total_sectors); + +static struct attribute *m24lr_ctl_dev_attrs[] = { + &dev_attr_unlock.attr, + &dev_attr_new_pass.attr, + &dev_attr_uid.attr, + &dev_attr_total_sectors.attr, + NULL, +}; + +static const struct m24lr_chip *m24lr_get_chip(struct device *dev) +{ + const struct m24lr_chip *ret; + const struct i2c_device_id *id; + + id = i2c_match_id(m24lr_ids, to_i2c_client(dev)); + + if (dev->of_node && of_match_device(m24lr_of_match, dev)) + ret = of_device_get_match_data(dev); + else if (id) + ret = (void *)id->driver_data; + else + ret = acpi_device_get_match_data(dev); + + return ret; +} + +static int m24lr_probe(struct i2c_client *client) +{ + struct regmap_config eeprom_regmap_conf = {0}; + struct nvmem_config nvmem_conf = {0}; + struct device *dev = &client->dev; + struct i2c_client *eeprom_client; + const struct m24lr_chip *chip; + struct regmap *eeprom_regmap; + struct nvmem_device *nvmem; + struct regmap *ctl_regmap; + struct m24lr *m24lr; + u32 regs[2]; + long err; + + if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) + return -EOPNOTSUPP; + + chip = m24lr_get_chip(dev); + if (!chip) + return -ENODEV; + + m24lr = devm_kzalloc(dev, sizeof(struct m24lr), GFP_KERNEL); + if (!m24lr) + return -ENOMEM; + + err = device_property_read_u32_array(dev, "reg", regs, ARRAY_SIZE(regs)); + if (err) + return dev_err_probe(dev, err, "Failed to read 'reg' property\n"); + + /* Create a second I2C client for the eeprom interface */ + eeprom_client = devm_i2c_new_dummy_device(dev, client->adapter, regs[1]); + if (IS_ERR(eeprom_client)) + return dev_err_probe(dev, PTR_ERR(eeprom_client), + "Failed to create dummy I2C client for the EEPROM\n"); + + ctl_regmap = devm_regmap_init_i2c(client, &m24lr_ctl_regmap_conf); + if (IS_ERR(ctl_regmap)) + return dev_err_probe(dev, PTR_ERR(ctl_regmap), + "Failed to init regmap\n"); + + eeprom_regmap_conf.name = "m24lr_eeprom"; + eeprom_regmap_conf.reg_bits = 16; + eeprom_regmap_conf.val_bits = 8; + eeprom_regmap_conf.disable_locking = true; + eeprom_regmap_conf.max_register = chip->eeprom_size - 1; + + eeprom_regmap = devm_regmap_init_i2c(eeprom_client, + &eeprom_regmap_conf); + if (IS_ERR(eeprom_regmap)) + return dev_err_probe(dev, PTR_ERR(eeprom_regmap), + "Failed to init regmap\n"); + + mutex_init(&m24lr->lock); + m24lr->sss_len = chip->sss_len; + m24lr->page_size = chip->page_size; + m24lr->eeprom_size = chip->eeprom_size; + m24lr->eeprom_regmap = eeprom_regmap; + m24lr->ctl_regmap = ctl_regmap; + + nvmem_conf.dev = &eeprom_client->dev; + nvmem_conf.owner = THIS_MODULE; + nvmem_conf.type = NVMEM_TYPE_EEPROM; + nvmem_conf.reg_read = m24lr_nvmem_read; + nvmem_conf.reg_write = m24lr_nvmem_write; + nvmem_conf.size = chip->eeprom_size; + nvmem_conf.word_size = 1; + nvmem_conf.stride = 1; + nvmem_conf.priv = m24lr; + + nvmem = devm_nvmem_register(dev, &nvmem_conf); + if (IS_ERR(nvmem)) + return dev_err_probe(dev, PTR_ERR(nvmem), + "Failed to register nvmem\n"); + + i2c_set_clientdata(client, m24lr); + i2c_set_clientdata(eeprom_client, m24lr); + + bin_attr_sss.size = chip->sss_len; + bin_attr_sss.private = m24lr; + err = sysfs_create_bin_file(&dev->kobj, &bin_attr_sss); + if (err) + return dev_err_probe(dev, err, + "Failed to create sss bin file\n"); + + /* test by reading the uid, if success store it */ + err = m24lr_read_reg_le(m24lr, &m24lr->uid, 2324, sizeof(m24lr->uid)); + if (IS_ERR_VALUE(err)) + goto remove_bin_file; + + return 0; + +remove_bin_file: + sysfs_remove_bin_file(&dev->kobj, &bin_attr_sss); + + return err; +} + +static void m24lr_remove(struct i2c_client *client) +{ + sysfs_remove_bin_file(&client->dev.kobj, &bin_attr_sss); +} + +ATTRIBUTE_GROUPS(m24lr_ctl_dev); + +static struct i2c_driver m24lr_driver = { + .driver = { + .name = "m24lr", + .of_match_table = m24lr_of_match, + .dev_groups = m24lr_ctl_dev_groups, + }, + .probe = m24lr_probe, + .remove = m24lr_remove, + .id_table = m24lr_ids, +}; +module_i2c_driver(m24lr_driver); + +MODULE_AUTHOR("Abd-Alrhman Masalkhi"); +MODULE_DESCRIPTION("st m24lr control driver"); +MODULE_LICENSE("GPL"); |