diff options
Diffstat (limited to 'drivers/mtd/nand/raw/atmel')
| -rw-r--r-- | drivers/mtd/nand/raw/atmel/nand-controller.c | 33 | ||||
| -rw-r--r-- | drivers/mtd/nand/raw/atmel/pmecc.c | 1 |
2 files changed, 24 insertions, 10 deletions
diff --git a/drivers/mtd/nand/raw/atmel/nand-controller.c b/drivers/mtd/nand/raw/atmel/nand-controller.c index 84ab4a83cbd6..83ba4ebd02d4 100644 --- a/drivers/mtd/nand/raw/atmel/nand-controller.c +++ b/drivers/mtd/nand/raw/atmel/nand-controller.c @@ -1240,7 +1240,7 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand, const struct nand_interface_config *conf, struct atmel_smc_cs_conf *smcconf) { - u32 ncycles, totalcycles, timeps, mckperiodps; + u32 ncycles, totalcycles, timeps, mckperiodps, pulse; struct atmel_nand_controller *nc; int ret; @@ -1366,11 +1366,16 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand, ATMEL_SMC_MODE_TDFMODE_OPTIMIZED; /* - * Read pulse timing directly matches tRP: + * Read pulse timing would directly match tRP, + * but some NAND flash chips (S34ML01G2 and W29N02KVxxAF) + * do not work properly in timing mode 3. + * The workaround is to extend the SMC NRD pulse to meet tREA + * timing. * - * NRD_PULSE = tRP + * NRD_PULSE = max(tRP, tREA) */ - ncycles = DIV_ROUND_UP(conf->timings.sdr.tRP_min, mckperiodps); + pulse = max(conf->timings.sdr.tRP_min, conf->timings.sdr.tREA_max); + ncycles = DIV_ROUND_UP(pulse, mckperiodps); totalcycles += ncycles; ret = atmel_smc_cs_conf_set_pulse(smcconf, ATMEL_SMC_NRD_SHIFT, ncycles); @@ -1378,13 +1383,23 @@ static int atmel_smc_nand_prepare_smcconf(struct atmel_nand *nand, return ret; /* + * Read setup timing depends on the operation done on the NAND: + * + * NRD_SETUP = max(tAR, tCLR) + */ + timeps = max(conf->timings.sdr.tAR_min, conf->timings.sdr.tCLR_min); + ncycles = DIV_ROUND_UP(timeps, mckperiodps); + totalcycles += ncycles; + ret = atmel_smc_cs_conf_set_setup(smcconf, ATMEL_SMC_NRD_SHIFT, ncycles); + if (ret) + return ret; + + /* * The read cycle timing is directly matching tRC, but is also * dependent on the setup and hold timings we calculated earlier, * which gives: * - * NRD_CYCLE = max(tRC, NRD_PULSE + NRD_HOLD) - * - * NRD_SETUP is always 0. + * NRD_CYCLE = max(tRC, NRD_SETUP + NRD_PULSE + NRD_HOLD) */ ncycles = DIV_ROUND_UP(conf->timings.sdr.tRC_min, mckperiodps); ncycles = max(totalcycles, ncycles); @@ -1848,7 +1863,7 @@ atmel_nand_controller_legacy_add_nands(struct atmel_nand_controller *nc) static int atmel_nand_controller_add_nands(struct atmel_nand_controller *nc) { - struct device_node *np, *nand_np; + struct device_node *np; struct device *dev = nc->dev; int ret, reg_cells; u32 val; @@ -1875,7 +1890,7 @@ static int atmel_nand_controller_add_nands(struct atmel_nand_controller *nc) reg_cells += val; - for_each_child_of_node(np, nand_np) { + for_each_child_of_node_scoped(np, nand_np) { struct atmel_nand *nand; nand = atmel_nand_create(nc, nand_np, reg_cells); diff --git a/drivers/mtd/nand/raw/atmel/pmecc.c b/drivers/mtd/nand/raw/atmel/pmecc.c index 0b402823b619..1d0e93e4edb1 100644 --- a/drivers/mtd/nand/raw/atmel/pmecc.c +++ b/drivers/mtd/nand/raw/atmel/pmecc.c @@ -1010,4 +1010,3 @@ module_platform_driver(atmel_pmecc_driver); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Boris Brezillon <boris.brezillon@free-electrons.com>"); MODULE_DESCRIPTION("PMECC engine driver"); -MODULE_ALIAS("platform:atmel_pmecc"); |