diff options
Diffstat (limited to 'drivers/net/dsa/b53/b53_regs.h')
| -rw-r--r-- | drivers/net/dsa/b53/b53_regs.h | 27 |
1 files changed, 23 insertions, 4 deletions
diff --git a/drivers/net/dsa/b53/b53_regs.h b/drivers/net/dsa/b53/b53_regs.h index 1fbc5a204bc7..309fe0e46dad 100644 --- a/drivers/net/dsa/b53/b53_regs.h +++ b/drivers/net/dsa/b53/b53_regs.h @@ -29,6 +29,7 @@ #define B53_ARLIO_PAGE 0x05 /* ARL Access */ #define B53_FRAMEBUF_PAGE 0x06 /* Management frame access */ #define B53_MEM_ACCESS_PAGE 0x08 /* Memory access */ +#define B53_IEEE_PAGE 0x0a /* IEEE 802.1X */ /* PHY Registers */ #define B53_PORT_MII_PAGE(i) (0x10 + (i)) /* Port i MII Registers */ @@ -95,17 +96,22 @@ #define PORT_OVERRIDE_SPEED_10M (0 << PORT_OVERRIDE_SPEED_S) #define PORT_OVERRIDE_SPEED_100M (1 << PORT_OVERRIDE_SPEED_S) #define PORT_OVERRIDE_SPEED_1000M (2 << PORT_OVERRIDE_SPEED_S) +#define PORT_OVERRIDE_LP_FLOW_25 BIT(3) /* BCM5325 only */ #define PORT_OVERRIDE_RV_MII_25 BIT(4) /* BCM5325 only */ #define PORT_OVERRIDE_RX_FLOW BIT(4) #define PORT_OVERRIDE_TX_FLOW BIT(5) #define PORT_OVERRIDE_SPEED_2000M BIT(6) /* BCM5301X only, requires setting 1000M */ #define PORT_OVERRIDE_EN BIT(7) /* Use the register contents */ -/* Power-down mode control */ +/* Power-down mode control (8 bit) */ #define B53_PD_MODE_CTRL_25 0x0f +#define PD_MODE_PORT_MASK 0x1f +/* Bit 0 also powers down the switch. */ +#define PD_MODE_POWER_DOWN_PORT(i) BIT(i) /* IP Multicast control (8 bit) */ #define B53_IP_MULTICAST_CTRL 0x21 +#define B53_IP_MCAST_25 BIT(0) #define B53_IPMC_FWD_EN BIT(1) #define B53_UC_FWD_EN BIT(6) #define B53_MC_FWD_EN BIT(7) @@ -324,9 +330,10 @@ #define ARLTBL_VID_MASK 0xfff #define ARLTBL_DATA_PORT_ID_S_25 48 #define ARLTBL_DATA_PORT_ID_MASK_25 0xf -#define ARLTBL_AGE_25 BIT(61) -#define ARLTBL_STATIC_25 BIT(62) -#define ARLTBL_VALID_25 BIT(63) +#define ARLTBL_VID_S_65 53 +#define ARLTBL_AGE_25 BIT_ULL(61) +#define ARLTBL_STATIC_25 BIT_ULL(62) +#define ARLTBL_VALID_25 BIT_ULL(63) /* ARL Table Data Entry N Registers (32 bit) */ #define B53_ARLTBL_DATA_ENTRY(n) ((0x10 * (n)) + 0x18) @@ -366,6 +373,18 @@ #define B53_ARL_SRCH_RSTL(x) (B53_ARL_SRCH_RSTL_0 + ((x) * 0x10)) /************************************************************************* + * IEEE 802.1X Registers + *************************************************************************/ + +/* Multicast DLF Drop Control register (16 bit) */ +#define B53_IEEE_MCAST_DLF 0x94 +#define B53_IEEE_MCAST_DROP_EN BIT(11) + +/* Unicast DLF Drop Control register (16 bit) */ +#define B53_IEEE_UCAST_DLF 0x96 +#define B53_IEEE_UCAST_DROP_EN BIT(11) + +/************************************************************************* * Port VLAN Registers *************************************************************************/ |