diff options
Diffstat (limited to 'drivers/net/dsa')
| -rw-r--r-- | drivers/net/dsa/b53/b53_common.c | 2 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz8.c | 20 | ||||
| -rw-r--r-- | drivers/net/dsa/microchip/ksz_common.c | 7 |
3 files changed, 19 insertions, 10 deletions
diff --git a/drivers/net/dsa/b53/b53_common.c b/drivers/net/dsa/b53/b53_common.c index 9942fb6f7f4b..829b1f087e9e 100644 --- a/drivers/net/dsa/b53/b53_common.c +++ b/drivers/net/dsa/b53/b53_common.c @@ -2078,7 +2078,7 @@ int b53_fdb_dump(struct dsa_switch *ds, int port, /* Start search operation */ reg = ARL_SRCH_STDN; - b53_write8(priv, offset, B53_ARL_SRCH_CTL, reg); + b53_write8(priv, B53_ARLIO_PAGE, offset, reg); do { ret = b53_arl_search_wait(priv); diff --git a/drivers/net/dsa/microchip/ksz8.c b/drivers/net/dsa/microchip/ksz8.c index 76e490070e9c..c354abdafc1b 100644 --- a/drivers/net/dsa/microchip/ksz8.c +++ b/drivers/net/dsa/microchip/ksz8.c @@ -36,15 +36,14 @@ static void ksz_cfg(struct ksz_device *dev, u32 addr, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), addr, bits, set ? bits : 0); + ksz_rmw8(dev, addr, bits, set ? bits : 0); } static void ksz_port_cfg(struct ksz_device *dev, int port, int offset, u8 bits, bool set) { - regmap_update_bits(ksz_regmap_8(dev), - dev->dev_ops->get_port_addr(port, offset), - bits, set ? bits : 0); + ksz_rmw8(dev, dev->dev_ops->get_port_addr(port, offset), bits, + set ? bits : 0); } /** @@ -1955,16 +1954,19 @@ int ksz8_setup(struct dsa_switch *ds) ksz_cfg(dev, S_LINK_AGING_CTRL, SW_LINK_AUTO_AGING, true); /* Enable aggressive back off algorithm in half duplex mode. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_1, - SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + ret = ksz_rmw8(dev, REG_SW_CTRL_1, SW_AGGR_BACKOFF, SW_AGGR_BACKOFF); + if (ret) + return ret; /* * Make sure unicast VLAN boundary is set as default and * enable no excessive collision drop. */ - regmap_update_bits(ksz_regmap_8(dev), REG_SW_CTRL_2, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, - UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + ret = ksz_rmw8(dev, REG_SW_CTRL_2, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP, + UNICAST_VLAN_BOUNDARY | NO_EXC_COLLISION_DROP); + if (ret) + return ret; ksz_cfg(dev, S_REPLACE_VID_CTRL, SW_REPLACE_VID, false); diff --git a/drivers/net/dsa/microchip/ksz_common.c b/drivers/net/dsa/microchip/ksz_common.c index 7292bfe2f7ca..9568cc391fe3 100644 --- a/drivers/net/dsa/microchip/ksz_common.c +++ b/drivers/net/dsa/microchip/ksz_common.c @@ -1447,6 +1447,7 @@ static const struct regmap_range ksz8873_valid_regs[] = { regmap_reg_range(0x3f, 0x3f), /* advanced control registers */ + regmap_reg_range(0x43, 0x43), regmap_reg_range(0x60, 0x6f), regmap_reg_range(0x70, 0x75), regmap_reg_range(0x76, 0x78), @@ -2456,6 +2457,12 @@ static void ksz_update_port_member(struct ksz_device *dev, int port) dev->dev_ops->cfg_port_member(dev, i, val | cpu_port); } + /* HSR ports are setup once so need to use the assigned membership + * when the port is enabled. + */ + if (!port_member && p->stp_state == BR_STATE_FORWARDING && + (dev->hsr_ports & BIT(port))) + port_member = dev->hsr_ports; dev->dev_ops->cfg_port_member(dev, port, port_member | cpu_port); } |