diff options
Diffstat (limited to 'drivers/net/ethernet/wangxun/ngbevf/ngbevf_main.c')
| -rw-r--r-- | drivers/net/ethernet/wangxun/ngbevf/ngbevf_main.c | 261 |
1 files changed, 261 insertions, 0 deletions
diff --git a/drivers/net/ethernet/wangxun/ngbevf/ngbevf_main.c b/drivers/net/ethernet/wangxun/ngbevf/ngbevf_main.c new file mode 100644 index 000000000000..c1246ab5239c --- /dev/null +++ b/drivers/net/ethernet/wangxun/ngbevf/ngbevf_main.c @@ -0,0 +1,261 @@ +// SPDX-License-Identifier: GPL-2.0 +/* Copyright (c) 2015 - 2025 Beijing WangXun Technology Co., Ltd. */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/pci.h> +#include <linux/netdevice.h> +#include <linux/string.h> +#include <linux/etherdevice.h> + +#include "../libwx/wx_type.h" +#include "../libwx/wx_hw.h" +#include "../libwx/wx_lib.h" +#include "../libwx/wx_mbx.h" +#include "../libwx/wx_vf.h" +#include "../libwx/wx_vf_common.h" +#include "ngbevf_type.h" + +/* ngbevf_pci_tbl - PCI Device ID Table + * + * Wildcard entries (PCI_ANY_ID) should come last + * Last entry must be all 0s + * + * { Vendor ID, Device ID, SubVendor ID, SubDevice ID, + * Class, Class Mask, private data (not used) } + */ +static const struct pci_device_id ngbevf_pci_tbl[] = { + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860AL_W), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860A2), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860A2S), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860A4), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860A4S), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860AL2), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860AL2S), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860AL4), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860AL4S), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860NCSI), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860A1), 0}, + { PCI_VDEVICE(WANGXUN, NGBEVF_DEV_ID_EM_WX1860AL1), 0}, + /* required last entry */ + { .device = 0 } +}; + +static const struct net_device_ops ngbevf_netdev_ops = { + .ndo_open = wxvf_open, + .ndo_stop = wxvf_close, + .ndo_start_xmit = wx_xmit_frame, + .ndo_validate_addr = eth_validate_addr, + .ndo_set_mac_address = wx_set_mac_vf, +}; + +static void ngbevf_set_num_queues(struct wx *wx) +{ + /* Start with base case */ + wx->num_rx_queues = 1; + wx->num_tx_queues = 1; +} + +static int ngbevf_sw_init(struct wx *wx) +{ + struct net_device *netdev = wx->netdev; + struct pci_dev *pdev = wx->pdev; + int err; + + /* Initialize pcie info and common capability flags */ + err = wx_sw_init(wx); + if (err < 0) + goto err_wx_sw_init; + + /* Initialize the mailbox */ + err = wx_init_mbx_params_vf(wx); + if (err) + goto err_init_mbx_params; + + /* Initialize the device type */ + wx->mac.type = wx_mac_em; + wx->mac.max_msix_vectors = NGBEVF_MAX_MSIX_VECTORS; + /* lock to protect mailbox accesses */ + spin_lock_init(&wx->mbx.mbx_lock); + + err = wx_reset_hw_vf(wx); + if (err) { + wx_err(wx, "PF still in reset state. Is the PF interface up?\n"); + goto err_reset_hw; + } + wx_init_hw_vf(wx); + wx_negotiate_api_vf(wx); + if (is_zero_ether_addr(wx->mac.addr)) + dev_info(&pdev->dev, + "MAC address not assigned by administrator.\n"); + eth_hw_addr_set(netdev, wx->mac.addr); + + if (!is_valid_ether_addr(netdev->dev_addr)) { + dev_info(&pdev->dev, "Assigning random MAC address\n"); + eth_hw_addr_random(netdev); + ether_addr_copy(wx->mac.addr, netdev->dev_addr); + ether_addr_copy(wx->mac.perm_addr, netdev->dev_addr); + } + + wx->mac.max_tx_queues = NGBEVF_MAX_TX_QUEUES; + wx->mac.max_rx_queues = NGBEVF_MAX_RX_QUEUES; + /* Enable dynamic interrupt throttling rates */ + wx->rx_itr_setting = 1; + wx->tx_itr_setting = 1; + /* set default ring sizes */ + wx->tx_ring_count = NGBEVF_DEFAULT_TXD; + wx->rx_ring_count = NGBEVF_DEFAULT_RXD; + /* set default work limits */ + wx->tx_work_limit = NGBEVF_DEFAULT_TX_WORK; + wx->rx_work_limit = NGBEVF_DEFAULT_RX_WORK; + wx->set_num_queues = ngbevf_set_num_queues; + + return 0; +err_reset_hw: + kfree(wx->vfinfo); +err_init_mbx_params: + kfree(wx->rss_key); + kfree(wx->mac_table); +err_wx_sw_init: + return err; +} + +/** + * ngbevf_probe - Device Initialization Routine + * @pdev: PCI device information struct + * @ent: entry in ngbevf_pci_tbl + * + * Return: return 0 on success, negative on failure + * + * ngbevf_probe initializes an adapter identified by a pci_dev structure. + * The OS initialization, configuring of the adapter private structure, + * and a hardware reset occur. + **/ +static int ngbevf_probe(struct pci_dev *pdev, + const struct pci_device_id __always_unused *ent) +{ + struct net_device *netdev; + struct wx *wx = NULL; + int err; + + err = pci_enable_device_mem(pdev); + if (err) + return err; + + err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64)); + if (err) { + dev_err(&pdev->dev, + "No usable DMA configuration, aborting\n"); + goto err_pci_disable_dev; + } + + err = pci_request_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM), + dev_driver_string(&pdev->dev)); + if (err) { + dev_err(&pdev->dev, + "pci_request_selected_regions failed 0x%x\n", err); + goto err_pci_disable_dev; + } + + pci_set_master(pdev); + + netdev = devm_alloc_etherdev_mqs(&pdev->dev, + sizeof(struct wx), + NGBEVF_MAX_TX_QUEUES, + NGBEVF_MAX_RX_QUEUES); + if (!netdev) { + err = -ENOMEM; + goto err_pci_release_regions; + } + + SET_NETDEV_DEV(netdev, &pdev->dev); + + wx = netdev_priv(netdev); + wx->netdev = netdev; + wx->pdev = pdev; + + wx->msg_enable = netif_msg_init(-1, NETIF_MSG_DRV | + NETIF_MSG_PROBE | NETIF_MSG_LINK); + wx->hw_addr = devm_ioremap(&pdev->dev, + pci_resource_start(pdev, 0), + pci_resource_len(pdev, 0)); + if (!wx->hw_addr) { + err = -EIO; + goto err_pci_release_regions; + } + + netdev->netdev_ops = &ngbevf_netdev_ops; + + /* setup the private structure */ + err = ngbevf_sw_init(wx); + if (err) + goto err_pci_release_regions; + + netdev->features |= NETIF_F_HIGHDMA; + + eth_hw_addr_set(netdev, wx->mac.perm_addr); + ether_addr_copy(netdev->perm_addr, wx->mac.addr); + + wxvf_init_service(wx); + err = wx_init_interrupt_scheme(wx); + if (err) + goto err_free_sw_init; + + err = register_netdev(netdev); + if (err) + goto err_register; + + pci_set_drvdata(pdev, wx); + netif_tx_stop_all_queues(netdev); + + return 0; + +err_register: + wx_clear_interrupt_scheme(wx); +err_free_sw_init: + timer_delete_sync(&wx->service_timer); + cancel_work_sync(&wx->service_task); + kfree(wx->vfinfo); + kfree(wx->rss_key); + kfree(wx->mac_table); +err_pci_release_regions: + pci_release_selected_regions(pdev, + pci_select_bars(pdev, IORESOURCE_MEM)); +err_pci_disable_dev: + pci_disable_device(pdev); + return err; +} + +/** + * ngbevf_remove - Device Removal Routine + * @pdev: PCI device information struct + * + * ngbevf_remove is called by the PCI subsystem to alert the driver + * that it should release a PCI device. The could be caused by a + * Hot-Plug event, or because the driver is going to be removed from + * memory. + **/ +static void ngbevf_remove(struct pci_dev *pdev) +{ + wxvf_remove(pdev); +} + +static DEFINE_SIMPLE_DEV_PM_OPS(ngbevf_pm_ops, wxvf_suspend, wxvf_resume); + +static struct pci_driver ngbevf_driver = { + .name = KBUILD_MODNAME, + .id_table = ngbevf_pci_tbl, + .probe = ngbevf_probe, + .remove = ngbevf_remove, + .shutdown = wxvf_shutdown, + /* Power Management Hooks */ + .driver.pm = pm_sleep_ptr(&ngbevf_pm_ops) +}; + +module_pci_driver(ngbevf_driver); + +MODULE_DEVICE_TABLE(pci, ngbevf_pci_tbl); +MODULE_AUTHOR("Beijing WangXun Technology Co., Ltd, <software@trustnetic.com>"); +MODULE_DESCRIPTION("WangXun(R) Gigabit PCI Express Network Driver"); +MODULE_LICENSE("GPL"); |