diff options
Diffstat (limited to 'drivers/net/phy/qcom/at803x.c')
| -rw-r--r-- | drivers/net/phy/qcom/at803x.c | 194 |
1 files changed, 167 insertions, 27 deletions
diff --git a/drivers/net/phy/qcom/at803x.c b/drivers/net/phy/qcom/at803x.c index 26350b962890..51a132242462 100644 --- a/drivers/net/phy/qcom/at803x.c +++ b/drivers/net/phy/qcom/at803x.c @@ -19,6 +19,7 @@ #include <linux/regulator/consumer.h> #include <linux/of.h> #include <linux/phylink.h> +#include <linux/reset.h> #include <linux/sfp.h> #include <dt-bindings/net/qca-ar803x.h> @@ -26,9 +27,6 @@ #define AT803X_LED_CONTROL 0x18 -#define AT803X_PHY_MMD3_WOL_CTRL 0x8012 -#define AT803X_WOL_EN BIT(5) - #define AT803X_REG_CHIP_CONFIG 0x1f #define AT803X_BT_BX_REG_SEL 0x8000 @@ -96,6 +94,8 @@ #define ATH8035_PHY_ID 0x004dd072 #define AT8030_PHY_ID_MASK 0xffffffef +#define IPQ5018_PHY_ID 0x004dd0c0 + #define QCA9561_PHY_ID 0x004dd042 #define AT803X_PAGE_FIBER 0 @@ -108,6 +108,48 @@ /* disable hibernation mode */ #define AT803X_DISABLE_HIBERNATION_MODE BIT(2) +#define IPQ5018_PHY_FIFO_CONTROL 0x19 +#define IPQ5018_PHY_FIFO_RESET GENMASK(1, 0) + +#define IPQ5018_PHY_DEBUG_EDAC 0x4380 +#define IPQ5018_PHY_MMD1_MDAC 0x8100 +#define IPQ5018_PHY_DAC_MASK GENMASK(15, 8) + +/* MDAC and EDAC values for short cable length */ +#define IPQ5018_PHY_DEBUG_EDAC_VAL 0x10 +#define IPQ5018_PHY_MMD1_MDAC_VAL 0x10 + +#define IPQ5018_PHY_MMD1_MSE_THRESH1 0x1000 +#define IPQ5018_PHY_MMD1_MSE_THRESH2 0x1001 +#define IPQ5018_PHY_PCS_EEE_TX_TIMER 0x8008 +#define IPQ5018_PHY_PCS_EEE_RX_TIMER 0x8009 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL3 0x8074 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL4 0x8075 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL5 0x8076 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL6 0x8077 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL7 0x8078 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL9 0x807a +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL13 0x807e +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL14 0x807f + +#define IPQ5018_PHY_MMD1_MSE_THRESH1_VAL 0xf1 +#define IPQ5018_PHY_MMD1_MSE_THRESH2_VAL 0x1f6 +#define IPQ5018_PHY_PCS_EEE_TX_TIMER_VAL 0x7880 +#define IPQ5018_PHY_PCS_EEE_RX_TIMER_VAL 0xc8 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL3_VAL 0xc040 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL4_VAL 0xa060 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL5_VAL 0xc040 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL6_VAL 0xa060 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL7_VAL 0xc24c +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL9_VAL 0xc060 +#define IPQ5018_PHY_PCS_CDT_THRESH_CTRL13_VAL 0xb060 +#define IPQ5018_PHY_PCS_NEAR_ECHO_THRESH_VAL 0x90b0 + +#define IPQ5018_PHY_DEBUG_ANA_LDO_EFUSE 0x1 +#define IPQ5018_PHY_DEBUG_ANA_LDO_EFUSE_MASK GENMASK(7, 4) +#define IPQ5018_PHY_DEBUG_ANA_LDO_EFUSE_DEFAULT 0x50 +#define IPQ5018_PHY_DEBUG_ANA_DAC_FILTER 0xa080 + MODULE_DESCRIPTION("Qualcomm Atheros AR803x PHY driver"); MODULE_AUTHOR("Matus Ujhelyi"); MODULE_LICENSE("GPL"); @@ -133,6 +175,11 @@ struct at803x_context { u16 led_control; }; +struct ipq5018_priv { + struct reset_control *rst; + bool set_short_cable_dac; +}; + static int at803x_write_page(struct phy_device *phydev, int page) { int mask; @@ -866,30 +913,6 @@ static int at8031_config_init(struct phy_device *phydev) return at803x_config_init(phydev); } -static int at8031_set_wol(struct phy_device *phydev, - struct ethtool_wolinfo *wol) -{ - int ret; - - /* First setup MAC address and enable WOL interrupt */ - ret = at803x_set_wol(phydev, wol); - if (ret) - return ret; - - if (wol->wolopts & WAKE_MAGIC) - /* Enable WOL function for 1588 */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - 0, AT803X_WOL_EN); - else - /* Disable WoL function for 1588 */ - ret = phy_modify_mmd(phydev, MDIO_MMD_PCS, - AT803X_PHY_MMD3_WOL_CTRL, - AT803X_WOL_EN, 0); - - return ret; -} - static int at8031_config_intr(struct phy_device *phydev) { struct at803x_priv *priv = phydev->priv; @@ -987,6 +1010,109 @@ static int at8035_probe(struct phy_device *phydev) return at8035_parse_dt(phydev); } +static int ipq5018_cable_test_start(struct phy_device *phydev) +{ + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_CDT_THRESH_CTRL3, + IPQ5018_PHY_PCS_CDT_THRESH_CTRL3_VAL); + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_CDT_THRESH_CTRL4, + IPQ5018_PHY_PCS_CDT_THRESH_CTRL4_VAL); + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_CDT_THRESH_CTRL5, + IPQ5018_PHY_PCS_CDT_THRESH_CTRL5_VAL); + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_CDT_THRESH_CTRL6, + IPQ5018_PHY_PCS_CDT_THRESH_CTRL6_VAL); + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_CDT_THRESH_CTRL7, + IPQ5018_PHY_PCS_CDT_THRESH_CTRL7_VAL); + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_CDT_THRESH_CTRL9, + IPQ5018_PHY_PCS_CDT_THRESH_CTRL9_VAL); + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_CDT_THRESH_CTRL13, + IPQ5018_PHY_PCS_CDT_THRESH_CTRL13_VAL); + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_CDT_THRESH_CTRL3, + IPQ5018_PHY_PCS_NEAR_ECHO_THRESH_VAL); + + /* we do all the (time consuming) work later */ + return 0; +} + +static int ipq5018_config_init(struct phy_device *phydev) +{ + struct ipq5018_priv *priv = phydev->priv; + u16 val; + + /* + * set LDO efuse: first temporarily store ANA_DAC_FILTER value from + * debug register as it will be reset once the ANA_LDO_EFUSE register + * is written to + */ + val = at803x_debug_reg_read(phydev, IPQ5018_PHY_DEBUG_ANA_DAC_FILTER); + at803x_debug_reg_mask(phydev, IPQ5018_PHY_DEBUG_ANA_LDO_EFUSE, + IPQ5018_PHY_DEBUG_ANA_LDO_EFUSE_MASK, + IPQ5018_PHY_DEBUG_ANA_LDO_EFUSE_DEFAULT); + at803x_debug_reg_write(phydev, IPQ5018_PHY_DEBUG_ANA_DAC_FILTER, val); + + /* set 8023AZ EEE TX and RX timer values */ + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_EEE_TX_TIMER, + IPQ5018_PHY_PCS_EEE_TX_TIMER_VAL); + phy_write_mmd(phydev, MDIO_MMD_PCS, IPQ5018_PHY_PCS_EEE_RX_TIMER, + IPQ5018_PHY_PCS_EEE_RX_TIMER_VAL); + + /* set MSE threshold values */ + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, IPQ5018_PHY_MMD1_MSE_THRESH1, + IPQ5018_PHY_MMD1_MSE_THRESH1_VAL); + phy_write_mmd(phydev, MDIO_MMD_PMAPMD, IPQ5018_PHY_MMD1_MSE_THRESH2, + IPQ5018_PHY_MMD1_MSE_THRESH2_VAL); + + /* PHY DAC values are optional and only set in a PHY to PHY link architecture */ + if (priv->set_short_cable_dac) { + /* setting MDAC (Multi-level Digital-to-Analog Converter) in MMD1 */ + phy_modify_mmd(phydev, MDIO_MMD_PMAPMD, IPQ5018_PHY_MMD1_MDAC, + IPQ5018_PHY_DAC_MASK, IPQ5018_PHY_MMD1_MDAC_VAL); + + /* setting EDAC (Error-detection and Correction) in debug register */ + at803x_debug_reg_mask(phydev, IPQ5018_PHY_DEBUG_EDAC, + IPQ5018_PHY_DAC_MASK, IPQ5018_PHY_DEBUG_EDAC_VAL); + } + + return 0; +} + +static void ipq5018_link_change_notify(struct phy_device *phydev) +{ + /* + * Reset the FIFO buffer upon link disconnects to clear any residual data + * which may cause issues with the FIFO which it cannot recover from. + */ + mdiobus_modify_changed(phydev->mdio.bus, phydev->mdio.addr, + IPQ5018_PHY_FIFO_CONTROL, IPQ5018_PHY_FIFO_RESET, + phydev->link ? IPQ5018_PHY_FIFO_RESET : 0); +} + +static int ipq5018_probe(struct phy_device *phydev) +{ + struct device *dev = &phydev->mdio.dev; + struct ipq5018_priv *priv; + int ret; + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + priv->set_short_cable_dac = of_property_read_bool(dev->of_node, + "qcom,dac-preset-short-cable"); + + priv->rst = devm_reset_control_array_get_exclusive(dev); + if (IS_ERR(priv->rst)) + return dev_err_probe(dev, PTR_ERR(priv->rst), + "failed to acquire reset\n"); + + ret = reset_control_reset(priv->rst); + if (ret) + return dev_err_probe(dev, ret, "failed to reset\n"); + + phydev->priv = priv; + + return 0; +} + static struct phy_driver at803x_driver[] = { { /* Qualcomm Atheros AR8035 */ @@ -1079,6 +1205,19 @@ static struct phy_driver at803x_driver[] = { .soft_reset = genphy_soft_reset, .config_aneg = at803x_config_aneg, }, { + PHY_ID_MATCH_EXACT(IPQ5018_PHY_ID), + .name = "Qualcomm Atheros IPQ5018 internal PHY", + .flags = PHY_IS_INTERNAL | PHY_POLL_CABLE_TEST, + .probe = ipq5018_probe, + .config_init = ipq5018_config_init, + .link_change_notify = ipq5018_link_change_notify, + .read_status = at803x_read_status, + .config_intr = at803x_config_intr, + .handle_interrupt = at803x_handle_interrupt, + .cable_test_start = ipq5018_cable_test_start, + .cable_test_get_status = qca808x_cable_test_get_status, + .soft_reset = genphy_soft_reset, +}, { /* Qualcomm Atheros QCA9561 */ PHY_ID_MATCH_EXACT(QCA9561_PHY_ID), .name = "Qualcomm Atheros QCA9561 built-in PHY", @@ -1104,6 +1243,7 @@ static const struct mdio_device_id __maybe_unused atheros_tbl[] = { { PHY_ID_MATCH_EXACT(ATH8032_PHY_ID) }, { PHY_ID_MATCH_EXACT(ATH8035_PHY_ID) }, { PHY_ID_MATCH_EXACT(ATH9331_PHY_ID) }, + { PHY_ID_MATCH_EXACT(IPQ5018_PHY_ID) }, { PHY_ID_MATCH_EXACT(QCA9561_PHY_ID) }, { } }; |