diff options
Diffstat (limited to 'drivers/tty/serial/qcom_geni_serial.c')
| -rw-r--r-- | drivers/tty/serial/qcom_geni_serial.c | 176 |
1 files changed, 16 insertions, 160 deletions
diff --git a/drivers/tty/serial/qcom_geni_serial.c b/drivers/tty/serial/qcom_geni_serial.c index ce5cb97d60a7..8058b839b26c 100644 --- a/drivers/tty/serial/qcom_geni_serial.c +++ b/drivers/tty/serial/qcom_geni_serial.c @@ -14,7 +14,6 @@ #include <linux/irq.h> #include <linux/module.h> #include <linux/of.h> -#include <linux/pm_domain.h> #include <linux/pm_opp.h> #include <linux/platform_device.h> #include <linux/pm_runtime.h> @@ -102,16 +101,10 @@ #define DMA_RX_BUF_SIZE 2048 static DEFINE_IDA(port_ida); -#define DOMAIN_IDX_POWER 0 -#define DOMAIN_IDX_PERF 1 struct qcom_geni_device_data { bool console; enum geni_se_xfer_mode mode; - struct dev_pm_domain_attach_data pd_data; - int (*resources_init)(struct uart_port *uport); - int (*set_rate)(struct uart_port *uport, unsigned int baud); - int (*power_state)(struct uart_port *uport, bool state); }; struct qcom_geni_private_data { @@ -149,7 +142,6 @@ struct qcom_geni_serial_port { struct qcom_geni_private_data private_data; const struct qcom_geni_device_data *dev_data; - struct dev_pm_domain_list *pd_list; }; static const struct uart_ops qcom_geni_console_pops; @@ -1307,42 +1299,6 @@ static int geni_serial_set_rate(struct uart_port *uport, unsigned int baud) return 0; } -static int geni_serial_set_level(struct uart_port *uport, unsigned int baud) -{ - struct qcom_geni_serial_port *port = to_dev_port(uport); - struct device *perf_dev = port->pd_list->pd_devs[DOMAIN_IDX_PERF]; - - /* - * The performance protocol sets UART communication - * speeds by selecting different performance levels - * through the OPP framework. - * - * Supported perf levels for baudrates in firmware are below - * +---------------------+--------------------+ - * | Perf level value | Baudrate values | - * +---------------------+--------------------+ - * | 300 | 300 | - * | 1200 | 1200 | - * | 2400 | 2400 | - * | 4800 | 4800 | - * | 9600 | 9600 | - * | 19200 | 19200 | - * | 38400 | 38400 | - * | 57600 | 57600 | - * | 115200 | 115200 | - * | 230400 | 230400 | - * | 460800 | 460800 | - * | 921600 | 921600 | - * | 2000000 | 2000000 | - * | 3000000 | 3000000 | - * | 3200000 | 3200000 | - * | 4000000 | 4000000 | - * +---------------------+--------------------+ - */ - - return dev_pm_opp_set_level(perf_dev, baud); -} - static void qcom_geni_serial_set_termios(struct uart_port *uport, struct ktermios *termios, const struct ktermios *old) @@ -1361,7 +1317,7 @@ static void qcom_geni_serial_set_termios(struct uart_port *uport, /* baud rate */ baud = uart_get_baud_rate(uport, termios, old, 300, 8000000); - ret = port->dev_data->set_rate(uport, baud); + ret = geni_serial_set_rate(uport, baud); if (ret) return; @@ -1648,27 +1604,8 @@ static int geni_serial_resources_off(struct uart_port *uport) return 0; } -static int geni_serial_resource_state(struct uart_port *uport, bool power_on) -{ - return power_on ? geni_serial_resources_on(uport) : geni_serial_resources_off(uport); -} - -static int geni_serial_pwr_init(struct uart_port *uport) -{ - struct qcom_geni_serial_port *port = to_dev_port(uport); - int ret; - - ret = dev_pm_domain_attach_list(port->se.dev, - &port->dev_data->pd_data, &port->pd_list); - if (ret <= 0) - return -EINVAL; - - return 0; -} - -static int geni_serial_resource_init(struct uart_port *uport) +static int geni_serial_resource_init(struct qcom_geni_serial_port *port) { - struct qcom_geni_serial_port *port = to_dev_port(uport); int ret; port->se.clk = devm_clk_get(port->se.dev, "se"); @@ -1713,10 +1650,10 @@ static void qcom_geni_serial_pm(struct uart_port *uport, old_state = UART_PM_STATE_OFF; if (new_state == UART_PM_STATE_ON && old_state == UART_PM_STATE_OFF) - pm_runtime_resume_and_get(uport->dev); + geni_serial_resources_on(uport); else if (new_state == UART_PM_STATE_OFF && old_state == UART_PM_STATE_ON) - pm_runtime_put_sync(uport->dev); + geni_serial_resources_off(uport); } @@ -1819,16 +1756,13 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) port->se.dev = &pdev->dev; port->se.wrapper = dev_get_drvdata(pdev->dev.parent); - ret = port->dev_data->resources_init(uport); + ret = geni_serial_resource_init(port); if (ret) return ret; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -EINVAL; - goto error; - } - + if (!res) + return -EINVAL; uport->mapbase = res->start; uport->rs485_config = qcom_geni_rs485_config; @@ -1840,26 +1774,19 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) if (!data->console) { port->rx_buf = devm_kzalloc(uport->dev, DMA_RX_BUF_SIZE, GFP_KERNEL); - if (!port->rx_buf) { - ret = -ENOMEM; - goto error; - } + if (!port->rx_buf) + return -ENOMEM; } port->name = devm_kasprintf(uport->dev, GFP_KERNEL, "qcom_geni_serial_%s%d", uart_console(uport) ? "console" : "uart", uport->line); - if (!port->name) { - ret = -ENOMEM; - goto error; - } + if (!port->name) + return -ENOMEM; irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto error; - } - + if (irq < 0) + return irq; uport->irq = irq; uport->has_sysrq = IS_ENABLED(CONFIG_SERIAL_QCOM_GENI_CONSOLE); @@ -1881,18 +1808,16 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) IRQF_TRIGGER_HIGH, port->name, uport); if (ret) { dev_err(uport->dev, "Failed to get IRQ ret %d\n", ret); - goto error; + return ret; } ret = uart_get_rs485_mode(uport); if (ret) return ret; - devm_pm_runtime_enable(port->se.dev); - ret = uart_add_one_port(drv, uport); if (ret) - goto error; + return ret; if (port->wakeup_irq > 0) { device_init_wakeup(&pdev->dev, true); @@ -1902,15 +1827,11 @@ static int qcom_geni_serial_probe(struct platform_device *pdev) device_init_wakeup(&pdev->dev, false); ida_free(&port_ida, uport->line); uart_remove_one_port(drv, uport); - goto error; + return ret; } } return 0; - -error: - dev_pm_domain_detach_list(port->pd_list); - return ret; } static void qcom_geni_serial_remove(struct platform_device *pdev) @@ -1923,31 +1844,6 @@ static void qcom_geni_serial_remove(struct platform_device *pdev) device_init_wakeup(&pdev->dev, false); ida_free(&port_ida, uport->line); uart_remove_one_port(drv, &port->uport); - dev_pm_domain_detach_list(port->pd_list); -} - -static int __maybe_unused qcom_geni_serial_runtime_suspend(struct device *dev) -{ - struct qcom_geni_serial_port *port = dev_get_drvdata(dev); - struct uart_port *uport = &port->uport; - int ret = 0; - - if (port->dev_data->power_state) - ret = port->dev_data->power_state(uport, false); - - return ret; -} - -static int __maybe_unused qcom_geni_serial_runtime_resume(struct device *dev) -{ - struct qcom_geni_serial_port *port = dev_get_drvdata(dev); - struct uart_port *uport = &port->uport; - int ret = 0; - - if (port->dev_data->power_state) - ret = port->dev_data->power_state(uport, true); - - return ret; } static int qcom_geni_serial_suspend(struct device *dev) @@ -1985,46 +1881,14 @@ static int qcom_geni_serial_resume(struct device *dev) static const struct qcom_geni_device_data qcom_geni_console_data = { .console = true, .mode = GENI_SE_FIFO, - .resources_init = geni_serial_resource_init, - .set_rate = geni_serial_set_rate, - .power_state = geni_serial_resource_state, }; static const struct qcom_geni_device_data qcom_geni_uart_data = { .console = false, .mode = GENI_SE_DMA, - .resources_init = geni_serial_resource_init, - .set_rate = geni_serial_set_rate, - .power_state = geni_serial_resource_state, -}; - -static const struct qcom_geni_device_data sa8255p_qcom_geni_console_data = { - .console = true, - .mode = GENI_SE_FIFO, - .pd_data = { - .pd_flags = PD_FLAG_DEV_LINK_ON, - .pd_names = (const char*[]) { "power", "perf" }, - .num_pd_names = 2, - }, - .resources_init = geni_serial_pwr_init, - .set_rate = geni_serial_set_level, -}; - -static const struct qcom_geni_device_data sa8255p_qcom_geni_uart_data = { - .console = false, - .mode = GENI_SE_DMA, - .pd_data = { - .pd_flags = PD_FLAG_DEV_LINK_ON, - .pd_names = (const char*[]) { "power", "perf" }, - .num_pd_names = 2, - }, - .resources_init = geni_serial_pwr_init, - .set_rate = geni_serial_set_level, }; static const struct dev_pm_ops qcom_geni_serial_pm_ops = { - SET_RUNTIME_PM_OPS(qcom_geni_serial_runtime_suspend, - qcom_geni_serial_runtime_resume, NULL) SYSTEM_SLEEP_PM_OPS(qcom_geni_serial_suspend, qcom_geni_serial_resume) }; @@ -2034,17 +1898,9 @@ static const struct of_device_id qcom_geni_serial_match_table[] = { .data = &qcom_geni_console_data, }, { - .compatible = "qcom,sa8255p-geni-debug-uart", - .data = &sa8255p_qcom_geni_console_data, - }, - { .compatible = "qcom,geni-uart", .data = &qcom_geni_uart_data, }, - { - .compatible = "qcom,sa8255p-geni-uart", - .data = &sa8255p_qcom_geni_uart_data, - }, {} }; MODULE_DEVICE_TABLE(of, qcom_geni_serial_match_table); |