diff options
Diffstat (limited to 'include/drm/display')
| -rw-r--r-- | include/drm/display/drm_dp.h | 23 | ||||
| -rw-r--r-- | include/drm/display/drm_dp_helper.h | 118 | ||||
| -rw-r--r-- | include/drm/display/drm_hdmi_audio_helper.h | 1 | ||||
| -rw-r--r-- | include/drm/display/drm_hdmi_cec_helper.h | 72 | ||||
| -rw-r--r-- | include/drm/display/drm_hdmi_helper.h | 6 |
5 files changed, 209 insertions, 11 deletions
diff --git a/include/drm/display/drm_dp.h b/include/drm/display/drm_dp.h index c413ef68f9a3..811e9238a77c 100644 --- a/include/drm/display/drm_dp.h +++ b/include/drm/display/drm_dp.h @@ -547,16 +547,28 @@ /* DFP Capability Extension */ #define DP_DFP_CAPABILITY_EXTENSION_SUPPORT 0x0a3 /* 2.0 */ -#define DP_PANEL_REPLAY_CAP 0x0b0 /* DP 2.0 */ +#define DP_PANEL_REPLAY_CAP_SUPPORT 0x0b0 /* DP 2.0 */ # define DP_PANEL_REPLAY_SUPPORT (1 << 0) # define DP_PANEL_REPLAY_SU_SUPPORT (1 << 1) # define DP_PANEL_REPLAY_EARLY_TRANSPORT_SUPPORT (1 << 2) /* eDP 1.5 */ -#define DP_PANEL_PANEL_REPLAY_CAPABILITY 0xb1 -# define DP_PANEL_PANEL_REPLAY_SU_GRANULARITY_REQUIRED (1 << 5) +#define DP_PANEL_REPLAY_CAP_SIZE 7 -#define DP_PANEL_PANEL_REPLAY_X_GRANULARITY 0xb2 -#define DP_PANEL_PANEL_REPLAY_Y_GRANULARITY 0xb4 +#define DP_PANEL_REPLAY_CAP_CAPABILITY 0xb1 +# define DP_PANEL_REPLAY_DSC_DECODE_CAPABILITY_IN_PR_SHIFT 1 /* DP 2.1a */ +# define DP_PANEL_REPLAY_DSC_DECODE_CAPABILITY_IN_PR_MASK (3 << DP_PANEL_REPLAY_DSC_DECODE_CAPABILITY_IN_PR_SHIFT) +# define DP_DSC_DECODE_CAPABILITY_IN_PR_SUPPORTED 0x00 +# define DP_DSC_DECODE_CAPABILITY_IN_PR_FULL_FRAME_ONLY 0x01 +# define DP_DSC_DECODE_CAPABILITY_IN_PR_NOT_SUPPORTED 0x02 +# define DP_DSC_DECODE_CAPABILITY_IN_PR_RESERVED 0x03 +# define DP_PANEL_REPLAY_ASYNC_VIDEO_TIMING_NOT_SUPPORTED_IN_PR (1 << 3) +# define DP_PANEL_REPLAY_DSC_CRC_OF_MULTIPLE_SUS_SUPPORTED (1 << 4) +# define DP_PANEL_REPLAY_SU_GRANULARITY_REQUIRED (1 << 5) +# define DP_PANEL_REPLAY_SU_Y_GRANULARITY_EXTENDED_CAPABILITY_SUPPORTED (1 << 6) +# define DP_PANEL_REPLAY_LINK_OFF_SUPPORTED_IN_PR_AFTER_ADAPTIVE_SYNC_SDP (1 << 7) + +#define DP_PANEL_REPLAY_CAP_X_GRANULARITY 0xb2 +#define DP_PANEL_REPLAY_CAP_Y_GRANULARITY 0xb4 /* Link Configuration */ #define DP_LINK_BW_SET 0x100 @@ -1025,6 +1037,7 @@ #define DP_EDP_GENERAL_CAP_2 0x703 # define DP_EDP_OVERDRIVE_ENGINE_ENABLED (1 << 0) # define DP_EDP_PANEL_LUMINANCE_CONTROL_CAPABLE (1 << 4) +# define DP_EDP_SMOOTH_BRIGHTNESS_CAPABLE (1 << 6) /* eDP 2.0 */ #define DP_EDP_GENERAL_CAP_3 0x704 /* eDP 1.4 */ # define DP_EDP_X_REGION_CAP_MASK (0xf << 0) diff --git a/include/drm/display/drm_dp_helper.h b/include/drm/display/drm_dp_helper.h index 5ae4241959f2..87caa4f1fdb8 100644 --- a/include/drm/display/drm_dp_helper.h +++ b/include/drm/display/drm_dp_helper.h @@ -518,23 +518,93 @@ struct drm_dp_aux { * @powered_down: If true then the remote endpoint is powered down. */ bool powered_down; + + /** + * @no_zero_sized: If the hw can't use zero sized transfers (NVIDIA) + */ + bool no_zero_sized; + + /** + * @dpcd_probe_disabled: If probing before a DPCD access is disabled. + */ + bool dpcd_probe_disabled; }; int drm_dp_dpcd_probe(struct drm_dp_aux *aux, unsigned int offset); void drm_dp_dpcd_set_powered(struct drm_dp_aux *aux, bool powered); +void drm_dp_dpcd_set_probe(struct drm_dp_aux *aux, bool enable); ssize_t drm_dp_dpcd_read(struct drm_dp_aux *aux, unsigned int offset, void *buffer, size_t size); ssize_t drm_dp_dpcd_write(struct drm_dp_aux *aux, unsigned int offset, void *buffer, size_t size); /** + * drm_dp_dpcd_read_data() - read a series of bytes from the DPCD + * @aux: DisplayPort AUX channel (SST or MST) + * @offset: address of the (first) register to read + * @buffer: buffer to store the register values + * @size: number of bytes in @buffer + * + * Returns zero (0) on success, or a negative error + * code on failure. -EIO is returned if the request was NAKed by the sink or + * if the retry count was exceeded. If not all bytes were transferred, this + * function returns -EPROTO. Errors from the underlying AUX channel transfer + * function, with the exception of -EBUSY (which causes the transaction to + * be retried), are propagated to the caller. + */ +static inline int drm_dp_dpcd_read_data(struct drm_dp_aux *aux, + unsigned int offset, + void *buffer, size_t size) +{ + int ret; + + ret = drm_dp_dpcd_read(aux, offset, buffer, size); + if (ret < 0) + return ret; + if (ret < size) + return -EPROTO; + + return 0; +} + +/** + * drm_dp_dpcd_write_data() - write a series of bytes to the DPCD + * @aux: DisplayPort AUX channel (SST or MST) + * @offset: address of the (first) register to write + * @buffer: buffer containing the values to write + * @size: number of bytes in @buffer + * + * Returns zero (0) on success, or a negative error + * code on failure. -EIO is returned if the request was NAKed by the sink or + * if the retry count was exceeded. If not all bytes were transferred, this + * function returns -EPROTO. Errors from the underlying AUX channel transfer + * function, with the exception of -EBUSY (which causes the transaction to + * be retried), are propagated to the caller. + */ +static inline int drm_dp_dpcd_write_data(struct drm_dp_aux *aux, + unsigned int offset, + void *buffer, size_t size) +{ + int ret; + + ret = drm_dp_dpcd_write(aux, offset, buffer, size); + if (ret < 0) + return ret; + if (ret < size) + return -EPROTO; + + return 0; +} + +/** * drm_dp_dpcd_readb() - read a single byte from the DPCD * @aux: DisplayPort AUX channel * @offset: address of the register to read * @valuep: location where the value of the register will be stored * * Returns the number of bytes transferred (1) on success, or a negative - * error code on failure. + * error code on failure. In most of the cases you should be using + * drm_dp_dpcd_read_byte() instead. */ static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, unsigned int offset, u8 *valuep) @@ -549,7 +619,8 @@ static inline ssize_t drm_dp_dpcd_readb(struct drm_dp_aux *aux, * @value: value to write to the register * * Returns the number of bytes transferred (1) on success, or a negative - * error code on failure. + * error code on failure. In most of the cases you should be using + * drm_dp_dpcd_write_byte() instead. */ static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, unsigned int offset, u8 value) @@ -557,6 +628,34 @@ static inline ssize_t drm_dp_dpcd_writeb(struct drm_dp_aux *aux, return drm_dp_dpcd_write(aux, offset, &value, 1); } +/** + * drm_dp_dpcd_read_byte() - read a single byte from the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to read + * @valuep: location where the value of the register will be stored + * + * Returns zero (0) on success, or a negative error code on failure. + */ +static inline int drm_dp_dpcd_read_byte(struct drm_dp_aux *aux, + unsigned int offset, u8 *valuep) +{ + return drm_dp_dpcd_read_data(aux, offset, valuep, 1); +} + +/** + * drm_dp_dpcd_write_byte() - write a single byte to the DPCD + * @aux: DisplayPort AUX channel + * @offset: address of the register to write + * @value: value to write to the register + * + * Returns zero (0) on success, or a negative error code on failure. + */ +static inline int drm_dp_dpcd_write_byte(struct drm_dp_aux *aux, + unsigned int offset, u8 value) +{ + return drm_dp_dpcd_write_data(aux, offset, &value, 1); +} + int drm_dp_read_dpcd_caps(struct drm_dp_aux *aux, u8 dpcd[DP_RECEIVER_CAP_SIZE]); @@ -566,6 +665,8 @@ int drm_dp_dpcd_read_link_status(struct drm_dp_aux *aux, int drm_dp_dpcd_read_phy_link_status(struct drm_dp_aux *aux, enum drm_dp_phy dp_phy, u8 link_status[DP_LINK_STATUS_SIZE]); +int drm_dp_link_power_up(struct drm_dp_aux *aux, unsigned char revision); +int drm_dp_link_power_down(struct drm_dp_aux *aux, unsigned char revision); int drm_dp_dpcd_write_payload(struct drm_dp_aux *aux, int vcpid, u8 start_time_slot, u8 time_slot_count); @@ -742,6 +843,7 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) * @lsb_reg_used: Do we also write values to the DP_EDP_BACKLIGHT_BRIGHTNESS_LSB register? * @aux_enable: Does the panel support the AUX enable cap? * @aux_set: Does the panel support setting the brightness through AUX? + * @luminance_set: Does the panel support setting the brightness through AUX using luminance values? * * This structure contains various data about an eDP backlight, which can be populated by using * drm_edp_backlight_init(). @@ -749,21 +851,23 @@ drm_dp_has_quirk(const struct drm_dp_desc *desc, enum drm_dp_quirk quirk) struct drm_edp_backlight_info { u8 pwmgen_bit_count; u8 pwm_freq_pre_divider; - u16 max; + u32 max; bool lsb_reg_used : 1; bool aux_enable : 1; bool aux_set : 1; + bool luminance_set : 1; }; int drm_edp_backlight_init(struct drm_dp_aux *aux, struct drm_edp_backlight_info *bl, + u32 max_luminance, u16 driver_pwm_freq_hz, const u8 edp_dpcd[EDP_DISPLAY_CTL_CAP_SIZE], - u16 *current_level, u8 *current_mode); + u32 *current_level, u8 *current_mode, bool need_luminance); int drm_edp_backlight_set_level(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, - u16 level); + u32 level); int drm_edp_backlight_enable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl, - u16 level); + u32 level); int drm_edp_backlight_disable(struct drm_dp_aux *aux, const struct drm_edp_backlight_info *bl); #if IS_ENABLED(CONFIG_DRM_KMS_HELPER) && (IS_BUILTIN(CONFIG_BACKLIGHT_CLASS_DEVICE) || \ @@ -881,5 +985,7 @@ int drm_dp_bw_channel_coding_efficiency(bool is_uhbr); int drm_dp_max_dprx_data_rate(int max_link_rate, int max_lanes); ssize_t drm_dp_vsc_sdp_pack(const struct drm_dp_vsc_sdp *vsc, struct dp_sdp *sdp); +int drm_dp_link_symbol_cycles(int lane_count, int pixels, int dsc_slice_count, + int bpp_x16, int symbol_size, bool is_mst); #endif /* _DRM_DP_HELPER_H_ */ diff --git a/include/drm/display/drm_hdmi_audio_helper.h b/include/drm/display/drm_hdmi_audio_helper.h index c9a6faef4109..44d910bdc72d 100644 --- a/include/drm/display/drm_hdmi_audio_helper.h +++ b/include/drm/display/drm_hdmi_audio_helper.h @@ -14,6 +14,7 @@ int drm_connector_hdmi_audio_init(struct drm_connector *connector, struct device *hdmi_codec_dev, const struct drm_connector_hdmi_audio_funcs *funcs, unsigned int max_i2s_playback_channels, + u64 i2s_formats, bool spdif_playback, int sound_dai_port); void drm_connector_hdmi_audio_plugged_notify(struct drm_connector *connector, diff --git a/include/drm/display/drm_hdmi_cec_helper.h b/include/drm/display/drm_hdmi_cec_helper.h new file mode 100644 index 000000000000..fd8f4d2f02c1 --- /dev/null +++ b/include/drm/display/drm_hdmi_cec_helper.h @@ -0,0 +1,72 @@ +/* SPDX-License-Identifier: MIT */ + +#ifndef DRM_DISPLAY_HDMI_CEC_HELPER +#define DRM_DISPLAY_HDMI_CEC_HELPER + +#include <linux/types.h> + +struct drm_connector; + +struct cec_msg; +struct device; + +struct drm_connector_hdmi_cec_funcs { + /** + * @init: perform hardware-specific initialization before registering the CEC adapter + */ + int (*init)(struct drm_connector *connector); + + /** + * @uninit: perform hardware-specific teardown for the CEC adapter + */ + void (*uninit)(struct drm_connector *connector); + + /** + * @enable: enable or disable CEC adapter + */ + int (*enable)(struct drm_connector *connector, bool enable); + + /** + * @log_addr: set adapter's logical address, can be called multiple + * times if adapter supports several LAs + */ + int (*log_addr)(struct drm_connector *connector, u8 logical_addr); + + /** + * @transmit: start transmission of the specified CEC message + */ + int (*transmit)(struct drm_connector *connector, u8 attempts, + u32 signal_free_time, struct cec_msg *msg); +}; + +int drmm_connector_hdmi_cec_register(struct drm_connector *connector, + const struct drm_connector_hdmi_cec_funcs *funcs, + const char *name, + u8 available_las, + struct device *dev); + +void drm_connector_hdmi_cec_received_msg(struct drm_connector *connector, + struct cec_msg *msg); + +void drm_connector_hdmi_cec_transmit_done(struct drm_connector *connector, + u8 status, + u8 arb_lost_cnt, u8 nack_cnt, + u8 low_drive_cnt, u8 error_cnt); + +void drm_connector_hdmi_cec_transmit_attempt_done(struct drm_connector *connector, + u8 status); + +#if IS_ENABLED(CONFIG_DRM_DISPLAY_HDMI_CEC_NOTIFIER_HELPER) +int drmm_connector_hdmi_cec_notifier_register(struct drm_connector *connector, + const char *port_name, + struct device *dev); +#else +static inline int drmm_connector_hdmi_cec_notifier_register(struct drm_connector *connector, + const char *port_name, + struct device *dev) +{ + return 0; +} +#endif + +#endif diff --git a/include/drm/display/drm_hdmi_helper.h b/include/drm/display/drm_hdmi_helper.h index 57e3b18c15ec..09145c9ee9fc 100644 --- a/include/drm/display/drm_hdmi_helper.h +++ b/include/drm/display/drm_hdmi_helper.h @@ -28,4 +28,10 @@ unsigned long long drm_hdmi_compute_mode_clock(const struct drm_display_mode *mode, unsigned int bpc, enum hdmi_colorspace fmt); +void +drm_hdmi_acr_get_n_cts(unsigned long long tmds_char_rate, + unsigned int sample_rate, + unsigned int *out_n, + unsigned int *out_cts); + #endif |