diff options
Diffstat (limited to 'include/linux/phy.h')
| -rw-r--r-- | include/linux/phy.h | 42 |
1 files changed, 42 insertions, 0 deletions
diff --git a/include/linux/phy.h b/include/linux/phy.h index a2b91b5f9d0a..5d8ff5428010 100644 --- a/include/linux/phy.h +++ b/include/linux/phy.h @@ -15,6 +15,7 @@ #include <linux/spinlock.h> #include <linux/ethtool.h> #include <linux/linkmode.h> +#include <linux/netlink.h> #include <linux/mdio.h> #include <linux/mii.h> #include <linux/mii_timestamper.h> @@ -78,6 +79,7 @@ extern const int phy_10gbit_features_array[1]; #define PHY_IS_INTERNAL 0x00000001 #define PHY_RST_AFTER_CLK_EN 0x00000002 +#define PHY_POLL_CABLE_TEST 0x00000004 #define MDIO_DEVICE_IS_PHY 0x80000000 /* Interface Mode definitions */ @@ -372,6 +374,12 @@ struct phy_device *mdiobus_scan(struct mii_bus *bus, int addr); * - irq or timer will set NOLINK if link goes down * - phy_stop moves to HALTED * + * CABLETEST: PHY is performing a cable test. Packet reception/sending + * is not expected to work, carrier will be indicated as down. PHY will be + * poll once per second, or on interrupt for it current state. + * Once complete, move to UP to restart the PHY. + * - phy_stop aborts the running test and moves to HALTED + * * HALTED: PHY is up, but no polling or interrupts are done. Or * PHY is in an error state. * - phy_start moves to UP @@ -383,6 +391,7 @@ enum phy_state { PHY_UP, PHY_RUNNING, PHY_NOLINK, + PHY_CABLETEST, }; /** @@ -514,6 +523,11 @@ struct phy_device { /* For use by PHYs inside the same package that need a shared state. */ struct phy_package_shared *shared; + /* Reporting cable test results */ + struct sk_buff *skb; + void *ehdr; + struct nlattr *nest; + /* Interrupt and Polling infrastructure */ struct delayed_work state_queue; @@ -689,6 +703,13 @@ struct phy_driver { int (*module_eeprom)(struct phy_device *dev, struct ethtool_eeprom *ee, u8 *data); + /* Start a cable test */ + int (*cable_test_start)(struct phy_device *dev); + /* Once per second, or on interrupt, request the status of the + * test. + */ + int (*cable_test_get_status)(struct phy_device *dev, bool *finished); + /* Get statistics from the phy using ethtool */ int (*get_sset_count)(struct phy_device *dev); void (*get_strings)(struct phy_device *dev, u8 *data); @@ -1046,6 +1067,10 @@ static inline bool phy_interrupt_is_valid(struct phy_device *phydev) */ static inline bool phy_polling_mode(struct phy_device *phydev) { + if (phydev->state == PHY_CABLETEST) + if (phydev->drv->flags & PHY_POLL_CABLE_TEST) + return true; + return phydev->irq == PHY_POLL; } @@ -1227,6 +1252,23 @@ int phy_speed_up(struct phy_device *phydev); int phy_restart_aneg(struct phy_device *phydev); int phy_reset_after_clk_enable(struct phy_device *phydev); +#if IS_ENABLED(CONFIG_PHYLIB) +int phy_start_cable_test(struct phy_device *phydev, + struct netlink_ext_ack *extack); +#else +static inline +int phy_start_cable_test(struct phy_device *phydev, + struct netlink_ext_ack *extack) +{ + NL_SET_ERR_MSG(extack, "Kernel not compiled with PHYLIB support"); + return -EOPNOTSUPP; +} +#endif + +int phy_cable_test_result(struct phy_device *phydev, u8 pair, u16 result); +int phy_cable_test_fault_length(struct phy_device *phydev, u8 pair, + u16 cm); + static inline void phy_device_reset(struct phy_device *phydev, int value) { mdio_device_reset(&phydev->mdio, value); |