diff options
Diffstat (limited to 'include/linux')
| -rw-r--r-- | include/linux/clk/at91_pmc.h | 2 | ||||
| -rw-r--r-- | include/linux/clk/ti.h | 8 | ||||
| -rw-r--r-- | include/linux/cpufreq.h | 6 | ||||
| -rw-r--r-- | include/linux/entry-virt.h (renamed from include/linux/entry-kvm.h) | 19 | ||||
| -rw-r--r-- | include/linux/hyperv.h | 7 | ||||
| -rw-r--r-- | include/linux/kvm_host.h | 17 | ||||
| -rw-r--r-- | include/linux/pm_runtime.h | 105 | ||||
| -rw-r--r-- | include/linux/rcupdate.h | 2 |
8 files changed, 98 insertions, 68 deletions
diff --git a/include/linux/clk/at91_pmc.h b/include/linux/clk/at91_pmc.h index 7af499bdbecb..d60ce9708ea2 100644 --- a/include/linux/clk/at91_pmc.h +++ b/include/linux/clk/at91_pmc.h @@ -47,8 +47,6 @@ #define AT91_PMC_PCSR 0x18 /* Peripheral Clock Status Register */ #define AT91_PMC_PLL_ACR 0x18 /* PLL Analog Control Register [for SAM9X60] */ -#define AT91_PMC_PLL_ACR_DEFAULT_UPLL UL(0x12020010) /* Default PLL ACR value for UPLL */ -#define AT91_PMC_PLL_ACR_DEFAULT_PLLA UL(0x00020010) /* Default PLL ACR value for PLLA */ #define AT91_PMC_PLL_ACR_UTMIVR (1 << 12) /* UPLL Voltage regulator Control */ #define AT91_PMC_PLL_ACR_UTMIBG (1 << 13) /* UPLL Bandgap Control */ diff --git a/include/linux/clk/ti.h b/include/linux/clk/ti.h index e656f63efdce..54a3fa370004 100644 --- a/include/linux/clk/ti.h +++ b/include/linux/clk/ti.h @@ -34,14 +34,14 @@ struct clk_omap_reg { * @clk_ref: struct clk_hw pointer to the clock's reference clock input * @control_reg: register containing the DPLL mode bitfield * @enable_mask: mask of the DPLL mode bitfield in @control_reg - * @last_rounded_rate: cache of the last rate result of omap2_dpll_round_rate() - * @last_rounded_m: cache of the last M result of omap2_dpll_round_rate() + * @last_rounded_rate: cache of the last rate result of omap2_dpll_determine_rate() + * @last_rounded_m: cache of the last M result of omap2_dpll_determine_rate() * @last_rounded_m4xen: cache of the last M4X result of - * omap4_dpll_regm4xen_round_rate() + * omap4_dpll_regm4xen_determine_rate() * @last_rounded_lpmode: cache of the last lpmode result of * omap4_dpll_lpmode_recalc() * @max_multiplier: maximum valid non-bypass multiplier value (actual) - * @last_rounded_n: cache of the last N result of omap2_dpll_round_rate() + * @last_rounded_n: cache of the last N result of omap2_dpll_determine_rate() * @min_divider: minimum valid non-bypass divider value (actual) * @max_divider: maximum valid non-bypass divider value (actual) * @max_rate: maximum clock rate for the DPLL diff --git a/include/linux/cpufreq.h b/include/linux/cpufreq.h index 40966512ea18..0465d1e6f72a 100644 --- a/include/linux/cpufreq.h +++ b/include/linux/cpufreq.h @@ -26,12 +26,10 @@ *********************************************************************/ /* * Frequency values here are CPU kHz - * - * Maximum transition latency is in nanoseconds - if it's unknown, - * CPUFREQ_ETERNAL shall be used. */ -#define CPUFREQ_ETERNAL (-1) +#define CPUFREQ_DEFAULT_TRANSITION_LATENCY_NS NSEC_PER_MSEC + #define CPUFREQ_NAME_LEN 16 /* Print length for names. Extra 1 space for accommodating '\n' in prints */ #define CPUFREQ_NAME_PLEN (CPUFREQ_NAME_LEN + 1) diff --git a/include/linux/entry-kvm.h b/include/linux/entry-virt.h index 16149f6625e4..42c89e3e5ca7 100644 --- a/include/linux/entry-kvm.h +++ b/include/linux/entry-virt.h @@ -1,6 +1,6 @@ /* SPDX-License-Identifier: GPL-2.0 */ -#ifndef __LINUX_ENTRYKVM_H -#define __LINUX_ENTRYKVM_H +#ifndef __LINUX_ENTRYVIRT_H +#define __LINUX_ENTRYVIRT_H #include <linux/static_call_types.h> #include <linux/resume_user_mode.h> @@ -10,7 +10,7 @@ #include <linux/tick.h> /* Transfer to guest mode work */ -#ifdef CONFIG_KVM_XFER_TO_GUEST_WORK +#ifdef CONFIG_VIRT_XFER_TO_GUEST_WORK #ifndef ARCH_XFER_TO_GUEST_MODE_WORK # define ARCH_XFER_TO_GUEST_MODE_WORK (0) @@ -21,8 +21,6 @@ _TIF_NOTIFY_SIGNAL | _TIF_NOTIFY_RESUME | \ ARCH_XFER_TO_GUEST_MODE_WORK) -struct kvm_vcpu; - /** * arch_xfer_to_guest_mode_handle_work - Architecture specific xfer to guest * mode work handling function. @@ -32,12 +30,10 @@ struct kvm_vcpu; * Invoked from xfer_to_guest_mode_handle_work(). Defaults to NOOP. Can be * replaced by architecture specific code. */ -static inline int arch_xfer_to_guest_mode_handle_work(struct kvm_vcpu *vcpu, - unsigned long ti_work); +static inline int arch_xfer_to_guest_mode_handle_work(unsigned long ti_work); #ifndef arch_xfer_to_guest_mode_work -static inline int arch_xfer_to_guest_mode_handle_work(struct kvm_vcpu *vcpu, - unsigned long ti_work) +static inline int arch_xfer_to_guest_mode_handle_work(unsigned long ti_work) { return 0; } @@ -46,11 +42,10 @@ static inline int arch_xfer_to_guest_mode_handle_work(struct kvm_vcpu *vcpu, /** * xfer_to_guest_mode_handle_work - Check and handle pending work which needs * to be handled before going to guest mode - * @vcpu: Pointer to current's VCPU data * * Returns: 0 or an error code */ -int xfer_to_guest_mode_handle_work(struct kvm_vcpu *vcpu); +int xfer_to_guest_mode_handle_work(void); /** * xfer_to_guest_mode_prepare - Perform last minute preparation work that @@ -95,6 +90,6 @@ static inline bool xfer_to_guest_mode_work_pending(void) lockdep_assert_irqs_disabled(); return __xfer_to_guest_mode_work_pending(); } -#endif /* CONFIG_KVM_XFER_TO_GUEST_WORK */ +#endif /* CONFIG_VIRT_XFER_TO_GUEST_WORK */ #endif diff --git a/include/linux/hyperv.h b/include/linux/hyperv.h index a59c5c3e95fb..59826c89171c 100644 --- a/include/linux/hyperv.h +++ b/include/linux/hyperv.h @@ -707,11 +707,6 @@ struct vmbus_channel_msginfo { unsigned char msg[]; }; -struct vmbus_close_msg { - struct vmbus_channel_msginfo info; - struct vmbus_channel_close_channel msg; -}; - enum vmbus_device_type { HV_IDE = 0, HV_SCSI, @@ -800,7 +795,7 @@ struct vmbus_channel { struct hv_ring_buffer_info outbound; /* send to parent */ struct hv_ring_buffer_info inbound; /* receive from parent */ - struct vmbus_close_msg close_msg; + struct vmbus_channel_close_channel close_msg; /* Statistics */ u64 interrupts; /* Host to Guest interrupts */ diff --git a/include/linux/kvm_host.h b/include/linux/kvm_host.h index 19b8c4bebb9c..fa36e70df088 100644 --- a/include/linux/kvm_host.h +++ b/include/linux/kvm_host.h @@ -2,7 +2,7 @@ #ifndef __KVM_HOST_H #define __KVM_HOST_H - +#include <linux/entry-virt.h> #include <linux/types.h> #include <linux/hardirq.h> #include <linux/list.h> @@ -2450,13 +2450,24 @@ static inline int kvm_arch_vcpu_run_pid_change(struct kvm_vcpu *vcpu) } #endif /* CONFIG_HAVE_KVM_VCPU_RUN_PID_CHANGE */ -#ifdef CONFIG_KVM_XFER_TO_GUEST_WORK +#ifdef CONFIG_VIRT_XFER_TO_GUEST_WORK static inline void kvm_handle_signal_exit(struct kvm_vcpu *vcpu) { vcpu->run->exit_reason = KVM_EXIT_INTR; vcpu->stat.signal_exits++; } -#endif /* CONFIG_KVM_XFER_TO_GUEST_WORK */ + +static inline int kvm_xfer_to_guest_mode_handle_work(struct kvm_vcpu *vcpu) +{ + int r = xfer_to_guest_mode_handle_work(); + + if (r) { + WARN_ON_ONCE(r != -EINTR); + kvm_handle_signal_exit(vcpu); + } + return r; +} +#endif /* CONFIG_VIRT_XFER_TO_GUEST_WORK */ /* * If more than one page is being (un)accounted, @virt must be the address of diff --git a/include/linux/pm_runtime.h b/include/linux/pm_runtime.h index d88d6b6ccf5b..a3f44f6c2da1 100644 --- a/include/linux/pm_runtime.h +++ b/include/linux/pm_runtime.h @@ -21,6 +21,7 @@ #define RPM_GET_PUT 0x04 /* Increment/decrement the usage_count */ #define RPM_AUTO 0x08 /* Use autosuspend_delay */ +#define RPM_TRANSPARENT 0x10 /* Succeed if runtime PM is disabled */ /* * Use this for defining a set of PM operations to be used in all situations @@ -350,13 +351,12 @@ static inline int pm_runtime_force_resume(struct device *dev) { return -ENXIO; } * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero, Runtime PM status change ongoing - * or device not in %RPM_ACTIVE state. + * * -EAGAIN: Runtime PM usage counter non-zero, Runtime PM status change + * ongoing or device not in %RPM_ACTIVE state. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. * Other values and conditions for the above values are possible as returned by * Runtime PM idle and suspend callbacks. */ @@ -370,14 +370,15 @@ static inline int pm_runtime_idle(struct device *dev) * @dev: Target device. * * Return: + * * 1: Success; device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero or Runtime PM status change ongoing. + * * -EAGAIN: Runtime PM usage counter non-zero or Runtime PM status change + * ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */ @@ -396,14 +397,15 @@ static inline int pm_runtime_suspend(struct device *dev) * engaging its "idle check" callback. * * Return: + * * 1: Success; device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero or Runtime PM status change ongoing. + * * -EAGAIN: Runtime PM usage counter non-zero or Runtime PM status change + * ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */ @@ -433,13 +435,12 @@ static inline int pm_runtime_resume(struct device *dev) * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero, Runtime PM status change ongoing - * or device not in %RPM_ACTIVE state. + * * -EAGAIN: Runtime PM usage counter non-zero, Runtime PM status change + * ongoing or device not in %RPM_ACTIVE state. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. */ static inline int pm_request_idle(struct device *dev) { @@ -464,15 +465,16 @@ static inline int pm_request_resume(struct device *dev) * equivalent pm_runtime_autosuspend() for @dev asynchronously. * * Return: + * * 1: Success; device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero or Runtime PM status change ongoing. + * * -EAGAIN: Runtime PM usage counter non-zero or Runtime PM status change + * ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. */ static inline int pm_request_autosuspend(struct device *dev) { @@ -511,6 +513,19 @@ static inline int pm_runtime_get_sync(struct device *dev) return __pm_runtime_resume(dev, RPM_GET_PUT); } +static inline int pm_runtime_get_active(struct device *dev, int rpmflags) +{ + int ret; + + ret = __pm_runtime_resume(dev, RPM_GET_PUT | rpmflags); + if (ret < 0) { + pm_runtime_put_noidle(dev); + return ret; + } + + return 0; +} + /** * pm_runtime_resume_and_get - Bump up usage counter of a device and resume it. * @dev: Target device. @@ -521,15 +536,7 @@ static inline int pm_runtime_get_sync(struct device *dev) */ static inline int pm_runtime_resume_and_get(struct device *dev) { - int ret; - - ret = __pm_runtime_resume(dev, RPM_GET_PUT); - if (ret < 0) { - pm_runtime_put_noidle(dev); - return ret; - } - - return 0; + return pm_runtime_get_active(dev, 0); } /** @@ -540,23 +547,22 @@ static inline int pm_runtime_resume_and_get(struct device *dev) * equal to 0, queue up a work item for @dev like in pm_request_idle(). * * Return: + * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero or Runtime PM status change ongoing. + * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status + * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. */ static inline int pm_runtime_put(struct device *dev) { return __pm_runtime_idle(dev, RPM_GET_PUT | RPM_ASYNC); } -DEFINE_FREE(pm_runtime_put, struct device *, if (_T) pm_runtime_put(_T)) - /** * __pm_runtime_put_autosuspend - Drop device usage counter and queue autosuspend if 0. * @dev: Target device. @@ -565,15 +571,16 @@ DEFINE_FREE(pm_runtime_put, struct device *, if (_T) pm_runtime_put(_T)) * equal to 0, queue up a work item for @dev like in pm_request_autosuspend(). * * Return: + * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero or Runtime PM status change ongoing. + * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status + * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. */ static inline int __pm_runtime_put_autosuspend(struct device *dev) { @@ -590,15 +597,16 @@ static inline int __pm_runtime_put_autosuspend(struct device *dev) * in pm_request_autosuspend(). * * Return: + * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero or Runtime PM status change ongoing. + * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status + * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. */ static inline int pm_runtime_put_autosuspend(struct device *dev) { @@ -606,6 +614,29 @@ static inline int pm_runtime_put_autosuspend(struct device *dev) return __pm_runtime_put_autosuspend(dev); } +DEFINE_GUARD(pm_runtime_noresume, struct device *, + pm_runtime_get_noresume(_T), pm_runtime_put_noidle(_T)); + +DEFINE_GUARD(pm_runtime_active, struct device *, + pm_runtime_get_sync(_T), pm_runtime_put(_T)); +DEFINE_GUARD(pm_runtime_active_auto, struct device *, + pm_runtime_get_sync(_T), pm_runtime_put_autosuspend(_T)); +/* + * Use the following guards with ACQUIRE()/ACQUIRE_ERR(). + * + * The difference between the "_try" and "_try_enabled" variants is that the + * former do not produce an error when runtime PM is disabled for the given + * device. + */ +DEFINE_GUARD_COND(pm_runtime_active, _try, + pm_runtime_get_active(_T, RPM_TRANSPARENT)) +DEFINE_GUARD_COND(pm_runtime_active, _try_enabled, + pm_runtime_resume_and_get(_T)) +DEFINE_GUARD_COND(pm_runtime_active_auto, _try, + pm_runtime_get_active(_T, RPM_TRANSPARENT)) +DEFINE_GUARD_COND(pm_runtime_active_auto, _try_enabled, + pm_runtime_resume_and_get(_T)) + /** * pm_runtime_put_sync - Drop device usage counter and run "idle check" if 0. * @dev: Target device. @@ -619,14 +650,15 @@ static inline int pm_runtime_put_autosuspend(struct device *dev) * if it returns an error code. * * Return: + * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero or Runtime PM status change ongoing. + * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status + * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */ @@ -646,15 +678,15 @@ static inline int pm_runtime_put_sync(struct device *dev) * if it returns an error code. * * Return: + * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero or Runtime PM status change ongoing. - * * -EAGAIN: usage_count non-zero or Runtime PM status change ongoing. + * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status + * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */ @@ -677,15 +709,16 @@ static inline int pm_runtime_put_sync_suspend(struct device *dev) * if it returns an error code. * * Return: + * * 1: Success. Usage counter dropped to zero, but device was already suspended. * * 0: Success. * * -EINVAL: Runtime PM error. * * -EACCES: Runtime PM disabled. - * * -EAGAIN: Runtime PM usage_count non-zero or Runtime PM status change ongoing. + * * -EAGAIN: Runtime PM usage counter became non-zero or Runtime PM status + * change ongoing. * * -EBUSY: Runtime PM child_count non-zero. * * -EPERM: Device PM QoS resume latency 0. * * -EINPROGRESS: Suspend already in progress. * * -ENOSYS: CONFIG_PM not enabled. - * * 1: Device already suspended. * Other values and conditions for the above values are possible as returned by * Runtime PM suspend callbacks. */ diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index 621b200d9b87..c5b30054cd01 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -129,7 +129,7 @@ static inline void rcu_sysrq_start(void) { } static inline void rcu_sysrq_end(void) { } #endif /* #else #ifdef CONFIG_RCU_STALL_COMMON */ -#if defined(CONFIG_NO_HZ_FULL) && (!defined(CONFIG_GENERIC_ENTRY) || !defined(CONFIG_KVM_XFER_TO_GUEST_WORK)) +#if defined(CONFIG_NO_HZ_FULL) && (!defined(CONFIG_GENERIC_ENTRY) || !defined(CONFIG_VIRT_XFER_TO_GUEST_WORK)) void rcu_irq_work_resched(void); #else static __always_inline void rcu_irq_work_resched(void) { } |