diff options
Diffstat (limited to 'include/net/mac80211.h')
| -rw-r--r-- | include/net/mac80211.h | 97 |
1 files changed, 51 insertions, 46 deletions
diff --git a/include/net/mac80211.h b/include/net/mac80211.h index c498f685d01f..a45e4bee65d4 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -682,6 +682,9 @@ struct ieee80211_parsed_tpe { * responder functionality. * @ftmr_params: configurable lci/civic parameter when enabling FTM responder. * @nontransmitted: this BSS is a nontransmitted BSS profile + * @tx_bss_conf: Pointer to the BSS configuration of transmitting interface + * if MBSSID is enabled. This pointer is RCU-protected due to CSA finish + * and BSS color change flows accessing it. * @transmitter_bssid: the address of transmitter AP * @bssid_index: index inside the multiple BSSID set * @bssid_indicator: 2^bssid_indicator is the maximum number of APs in set @@ -741,6 +744,7 @@ struct ieee80211_parsed_tpe { * @eht_80mhz_full_bw_ul_mumimo: in AP-mode, does this BSS support the * reception of an EHT TB PPDU on an RU that spans the entire PPDU * bandwidth + * @eht_disable_mcs15: disable EHT-MCS 15 reception capability. * @bss_param_ch_cnt: in BSS-mode, the BSS params change count. This * information is the latest known value. It can come from this link's * beacon or from a beacon sent by another link. @@ -754,6 +758,8 @@ struct ieee80211_parsed_tpe { * be updated to 1, even if bss_param_ch_cnt didn't change. This allows * the link to know that it heard the latest value from its own beacon * (as opposed to hearing its value from another link's beacon). + * @s1g_long_beacon_period: number of beacon intervals between each long + * beacon transmission. */ struct ieee80211_bss_conf { struct ieee80211_vif *vif; @@ -804,6 +810,7 @@ struct ieee80211_bss_conf { struct ieee80211_ftm_responder_params *ftmr_params; /* Multiple BSSID data */ bool nontransmitted; + struct ieee80211_bss_conf __rcu *tx_bss_conf; u8 transmitter_bssid[ETH_ALEN]; u8 bssid_index; u8 bssid_indicator; @@ -848,8 +855,12 @@ struct ieee80211_bss_conf { bool eht_su_beamformee; bool eht_mu_beamformer; bool eht_80mhz_full_bw_ul_mumimo; + bool eht_disable_mcs15; + u8 bss_param_ch_cnt; u8 bss_param_ch_cnt_link_id; + + u8 s1g_long_beacon_period; }; /** @@ -2023,7 +2034,6 @@ enum ieee80211_neg_ttlm_res { * @txq: the multicast data TX queue * @offload_flags: 802.3 -> 802.11 enapsulation offload flags, see * &enum ieee80211_offload_flags. - * @mbssid_tx_vif: Pointer to the transmitting interface if MBSSID is enabled. */ struct ieee80211_vif { enum nl80211_iftype type; @@ -2052,8 +2062,6 @@ struct ieee80211_vif { bool probe_req_reg; bool rx_mcast_action_reg; - struct ieee80211_vif *mbssid_tx_vif; - /* must be last */ u8 drv_priv[] __aligned(sizeof(void *)); }; @@ -2424,6 +2432,7 @@ struct ieee80211_sta_aggregates { * @he_cap: HE capabilities of this STA * @he_6ghz_capa: on 6 GHz, holds the HE 6 GHz band capabilities * @eht_cap: EHT capabilities of this STA + * @s1g_cap: S1G capabilities of this STA * @agg: per-link data for multi-link aggregation * @bandwidth: current bandwidth the station can receive with * @rx_nss: in HT/VHT, the maximum number of spatial streams the @@ -2446,6 +2455,7 @@ struct ieee80211_link_sta { struct ieee80211_sta_he_cap he_cap; struct ieee80211_he_6ghz_capa he_6ghz_capa; struct ieee80211_sta_eht_cap eht_cap; + struct ieee80211_sta_s1g_cap s1g_cap; struct ieee80211_sta_aggregates agg; @@ -2488,6 +2498,7 @@ struct ieee80211_link_sta { * @max_amsdu_subframes: indicates the maximal number of MSDUs in a single * A-MSDU. Taken from the Extended Capabilities element. 0 means * unlimited. + * @eml_cap: EML capabilities of this MLO station * @cur: currently valid data as aggregated from the active links * For non MLO STA it will point to the deflink data. For MLO STA * ieee80211_sta_recalc_aggregates() must be called to update it. @@ -2522,6 +2533,7 @@ struct ieee80211_sta { bool mlo; bool spp_amsdu; u8 max_amsdu_subframes; + u16 eml_cap; struct ieee80211_sta_aggregates *cur; @@ -2844,8 +2856,6 @@ struct ieee80211_txq { * * @IEEE80211_HW_DISALLOW_PUNCTURING: HW requires disabling puncturing in EHT * and connecting with a lower bandwidth instead - * @IEEE80211_HW_DISALLOW_PUNCTURING_5GHZ: HW requires disabling puncturing in - * EHT in 5 GHz and connecting with a lower bandwidth instead * * @IEEE80211_HW_HANDLES_QUIET_CSA: HW/driver handles quieting for CSA, so * no need to stop queues. This really should be set by a driver that @@ -2915,7 +2925,6 @@ enum ieee80211_hw_flags { IEEE80211_HW_DETECTS_COLOR_COLLISION, IEEE80211_HW_MLO_MCAST_MULTI_LINK_TX, IEEE80211_HW_DISALLOW_PUNCTURING, - IEEE80211_HW_DISALLOW_PUNCTURING_5GHZ, IEEE80211_HW_HANDLES_QUIET_CSA, IEEE80211_HW_STRICT, @@ -4127,6 +4136,15 @@ struct ieee80211_prep_tx_info { * Statistics that the driver doesn't fill will be filled by mac80211. * The callback can sleep. * + * @link_sta_statistics: Get link statistics for this station. For example with + * beacon filtering, the statistics kept by mac80211 might not be + * accurate, so let the driver pre-fill the statistics. The driver can + * fill most of the values (indicating which by setting the filled + * bitmap), but not all of them make sense - see the source for which + * ones are possible. + * Statistics that the driver doesn't fill will be filled by mac80211. + * The callback can sleep. + * * @conf_tx: Configure TX queue parameters (EDCF (aifs, cw_min, cw_max), * bursting) for a hardware TX queue. * Returns a negative error code on failure. @@ -4296,6 +4314,8 @@ struct ieee80211_prep_tx_info { * @mgd_complete_tx: Notify the driver that the response frame for a previously * transmitted frame announced with @mgd_prepare_tx was received, the data * is filled similarly to @mgd_prepare_tx though the duration is not used. + * Note that this isn't always called for each mgd_prepare_tx() call, for + * example for SAE the 'confirm' messages can be on the air in any order. * * @mgd_protect_tdls_discover: Protect a TDLS discovery session. After sending * a TDLS discovery-request, we expect a reply to arrive on the AP's @@ -4460,6 +4480,8 @@ struct ieee80211_prep_tx_info { * new links bitmaps may be 0 if going from/to a non-MLO situation. * The @old array contains pointers to the old bss_conf structures * that were already removed, in case they're needed. + * Note that removal of link should always succeed, so the return value + * will be ignored in a removal only case. * This callback can sleep. * @change_sta_links: Change the valid links of a station, similar to * @change_vif_links. This callback can sleep. @@ -4502,7 +4524,7 @@ struct ieee80211_ops { enum nl80211_iftype new_type, bool p2p); void (*remove_interface)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); - int (*config)(struct ieee80211_hw *hw, u32 changed); + int (*config)(struct ieee80211_hw *hw, int radio_idx, u32 changed); void (*bss_info_changed)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_bss_conf *info, @@ -4565,8 +4587,10 @@ struct ieee80211_ops { void (*get_key_seq)(struct ieee80211_hw *hw, struct ieee80211_key_conf *key, struct ieee80211_key_seq *seq); - int (*set_frag_threshold)(struct ieee80211_hw *hw, u32 value); - int (*set_rts_threshold)(struct ieee80211_hw *hw, u32 value); + int (*set_frag_threshold)(struct ieee80211_hw *hw, int radio_idx, + u32 value); + int (*set_rts_threshold)(struct ieee80211_hw *hw, int radio_idx, + u32 value); int (*sta_add)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_sta *sta); int (*sta_remove)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -4621,6 +4645,10 @@ struct ieee80211_ops { s64 offset); void (*reset_tsf)(struct ieee80211_hw *hw, struct ieee80211_vif *vif); int (*tx_last_beacon)(struct ieee80211_hw *hw); + void (*link_sta_statistics)(struct ieee80211_hw *hw, + struct ieee80211_vif *vif, + struct ieee80211_link_sta *link_sta, + struct link_station_info *link_sinfo); /** * @ampdu_action: @@ -4659,7 +4687,8 @@ struct ieee80211_ops { int (*get_survey)(struct ieee80211_hw *hw, int idx, struct survey_info *survey); void (*rfkill_poll)(struct ieee80211_hw *hw); - void (*set_coverage_class)(struct ieee80211_hw *hw, s16 coverage_class); + void (*set_coverage_class)(struct ieee80211_hw *hw, int radio_idx, + s16 coverage_class); #ifdef CONFIG_NL80211_TESTMODE int (*testmode_cmd)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, void *data, int len); @@ -4674,8 +4703,10 @@ struct ieee80211_ops { void (*channel_switch)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, struct ieee80211_channel_switch *ch_switch); - int (*set_antenna)(struct ieee80211_hw *hw, u32 tx_ant, u32 rx_ant); - int (*get_antenna)(struct ieee80211_hw *hw, u32 *tx_ant, u32 *rx_ant); + int (*set_antenna)(struct ieee80211_hw *hw, int radio_idx, + u32 tx_ant, u32 rx_ant); + int (*get_antenna)(struct ieee80211_hw *hw, int radio_idx, + u32 *tx_ant, u32 *rx_ant); int (*remain_on_channel)(struct ieee80211_hw *hw, struct ieee80211_vif *vif, @@ -5347,22 +5378,6 @@ void ieee80211_get_tx_rates(struct ieee80211_vif *vif, int max_rates); /** - * ieee80211_sta_set_expected_throughput - set the expected tpt for a station - * - * Call this function to notify mac80211 about a change in expected throughput - * to a station. A driver for a device that does rate control in firmware can - * call this function when the expected throughput estimate towards a station - * changes. The information is used to tune the CoDel AQM applied to traffic - * going towards that station (which can otherwise be too aggressive and cause - * slow stations to starve). - * - * @pubsta: the station to set throughput for. - * @thr: the current expected throughput in kbps. - */ -void ieee80211_sta_set_expected_throughput(struct ieee80211_sta *pubsta, - u32 thr); - -/** * ieee80211_tx_rate_update - transmit rate update callback * * Drivers should call this functions with a non-NULL pub sta @@ -6018,21 +6033,12 @@ void ieee80211_set_key_rx_seq(struct ieee80211_key_conf *keyconf, int tid, struct ieee80211_key_seq *seq); /** - * ieee80211_remove_key - remove the given key - * @keyconf: the parameter passed with the set key - * - * Context: Must be called with the wiphy mutex held. - * - * Remove the given key. If the key was uploaded to the hardware at the - * time this function is called, it is not deleted in the hardware but - * instead assumed to have been removed already. - */ -void ieee80211_remove_key(struct ieee80211_key_conf *keyconf); - -/** * ieee80211_gtk_rekey_add - add a GTK key from rekeying during WoWLAN * @vif: the virtual interface to add the key on - * @keyconf: new key data + * @idx: the keyidx of the key + * @key_data: the key data + * @key_len: the key data. Might be bigger than the actual key length, + * but not smaller (for the driver convinence) * @link_id: the link id of the key or -1 for non-MLO * * When GTK rekeying was done while the system was suspended, (a) new @@ -6055,13 +6061,11 @@ void ieee80211_remove_key(struct ieee80211_key_conf *keyconf); * for the new key for each TID to set up sequence counters properly. * * IMPORTANT: If this replaces a key that is present in the hardware, - * then it will attempt to remove it during this call. In many cases - * this isn't what you want, so call ieee80211_remove_key() first for - * the key that's being replaced. + * then it will attempt to remove it during this call. */ struct ieee80211_key_conf * ieee80211_gtk_rekey_add(struct ieee80211_vif *vif, - struct ieee80211_key_conf *keyconf, + u8 idx, u8 *key_data, u8 key_len, int link_id); /** @@ -7252,13 +7256,14 @@ void ieee80211_disable_rssi_reports(struct ieee80211_vif *vif); * ieee80211_ave_rssi - report the average RSSI for the specified interface * * @vif: the specified virtual interface + * @link_id: the link ID for MLO, or -1 for non-MLO * * Note: This function assumes that the given vif is valid. * * Return: The average RSSI value for the requested interface, or 0 if not * applicable. */ -int ieee80211_ave_rssi(struct ieee80211_vif *vif); +int ieee80211_ave_rssi(struct ieee80211_vif *vif, int link_id); /** * ieee80211_report_wowlan_wakeup - report WoWLAN wakeup |