diff options
Diffstat (limited to 'tools/testing/selftests/nolibc/Makefile.nolibc')
| -rw-r--r-- | tools/testing/selftests/nolibc/Makefile.nolibc | 383 |
1 files changed, 383 insertions, 0 deletions
diff --git a/tools/testing/selftests/nolibc/Makefile.nolibc b/tools/testing/selftests/nolibc/Makefile.nolibc new file mode 100644 index 000000000000..0fb759ba992e --- /dev/null +++ b/tools/testing/selftests/nolibc/Makefile.nolibc @@ -0,0 +1,383 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for nolibc tests +# we're in ".../tools/testing/selftests/nolibc" +ifeq ($(srctree),) +srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR))) +endif + +include $(srctree)/tools/scripts/utilities.mak +# We need this for the "__cc-option" macro. +include $(srctree)/scripts/Makefile.compiler + +ifneq ($(O),) +ifneq ($(call is-absolute,$(O)),y) +$(error Only absolute O= parameters are supported) +endif +objtree := $(O) +else +objtree ?= $(srctree) +endif + +ifeq ($(ARCH),) +include $(srctree)/scripts/subarch.include +ARCH = $(SUBARCH) +endif + +cc-option = $(call __cc-option, $(CC),$(CLANG_CROSS_FLAGS),$(1),$(2)) + +# XARCH extends the kernel's ARCH with a few variants of the same +# architecture that only differ by the configuration, the toolchain +# and the Qemu program used. It is copied as-is into ARCH except for +# a few specific values which are mapped like this: +# +# XARCH | ARCH | config +# -------------|-----------|------------------------- +# ppc | powerpc | 32 bits +# ppc64 | powerpc | 64 bits big endian +# ppc64le | powerpc | 64 bits little endian +# +# It is recommended to only use XARCH, though it does not harm if +# ARCH is already set. For simplicity, ARCH is sufficient for all +# architectures where both are equal. + +# configure default variants for target kernel supported architectures +XARCH_powerpc = ppc +XARCH_mips = mips32le +XARCH_riscv = riscv64 +XARCH = $(or $(XARCH_$(ARCH)),$(ARCH)) + +# map from user input variants to their kernel supported architectures +ARCH_x32 = x86 +ARCH_armthumb = arm +ARCH_ppc = powerpc +ARCH_ppc64 = powerpc +ARCH_ppc64le = powerpc +ARCH_mips32le = mips +ARCH_mips32be = mips +ARCH_mipsn32le = mips +ARCH_mipsn32be = mips +ARCH_mips64le = mips +ARCH_mips64be = mips +ARCH_riscv32 = riscv +ARCH_riscv64 = riscv +ARCH_s390x = s390 +ARCH_sparc32 = sparc +ARCH_sparc64 = sparc +ARCH_sh4 = sh +ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) + +# kernel image names by architecture +IMAGE_i386 = arch/x86/boot/bzImage +IMAGE_x86_64 = arch/x86/boot/bzImage +IMAGE_x32 = arch/x86/boot/bzImage +IMAGE_x86 = arch/x86/boot/bzImage +IMAGE_arm64 = arch/arm64/boot/Image +IMAGE_arm = arch/arm/boot/zImage +IMAGE_armthumb = arch/arm/boot/zImage +IMAGE_mips32le = vmlinuz +IMAGE_mips32be = vmlinuz +IMAGE_mipsn32le = vmlinuz +IMAGE_mipsn32be = vmlinuz +IMAGE_mips64le = vmlinuz +IMAGE_mips64be = vmlinuz +IMAGE_ppc = vmlinux +IMAGE_ppc64 = vmlinux +IMAGE_ppc64le = arch/powerpc/boot/zImage +IMAGE_riscv = arch/riscv/boot/Image +IMAGE_riscv32 = arch/riscv/boot/Image +IMAGE_riscv64 = arch/riscv/boot/Image +IMAGE_s390x = arch/s390/boot/bzImage +IMAGE_s390 = arch/s390/boot/bzImage +IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi +IMAGE_sparc32 = arch/sparc/boot/image +IMAGE_sparc64 = arch/sparc/boot/image +IMAGE_m68k = vmlinux +IMAGE_sh4 = arch/sh/boot/zImage +IMAGE = $(objtree)/$(IMAGE_$(XARCH)) +IMAGE_NAME = $(notdir $(IMAGE)) + +# default kernel configurations that appear to be usable +DEFCONFIG_i386 = defconfig +DEFCONFIG_x86_64 = defconfig +DEFCONFIG_x32 = defconfig +DEFCONFIG_x86 = defconfig +DEFCONFIG_arm64 = defconfig +DEFCONFIG_arm = multi_v7_defconfig +DEFCONFIG_armthumb = multi_v7_defconfig +DEFCONFIG_mips32le = malta_defconfig +DEFCONFIG_mips32be = malta_defconfig generic/eb.config +DEFCONFIG_mipsn32le = malta_defconfig generic/64r2.config +DEFCONFIG_mipsn32be = malta_defconfig generic/64r6.config generic/eb.config +DEFCONFIG_mips64le = malta_defconfig generic/64r6.config +DEFCONFIG_mips64be = malta_defconfig generic/64r2.config generic/eb.config +DEFCONFIG_ppc = pmac32_defconfig +DEFCONFIG_ppc64 = powernv_be_defconfig +DEFCONFIG_ppc64le = powernv_defconfig +DEFCONFIG_riscv = defconfig +DEFCONFIG_riscv32 = rv32_defconfig +DEFCONFIG_riscv64 = defconfig +DEFCONFIG_s390x = defconfig +DEFCONFIG_s390 = defconfig compat.config +DEFCONFIG_loongarch = defconfig +DEFCONFIG_sparc32 = sparc32_defconfig +DEFCONFIG_sparc64 = sparc64_defconfig +DEFCONFIG_m68k = virt_defconfig +DEFCONFIG_sh4 = rts7751r2dplus_defconfig +DEFCONFIG = $(DEFCONFIG_$(XARCH)) + +EXTRACONFIG_x32 = -e CONFIG_X86_X32_ABI +EXTRACONFIG_arm = -e CONFIG_NAMESPACES +EXTRACONFIG_armthumb = -e CONFIG_NAMESPACES +EXTRACONFIG_m68k = -e CONFIG_BLK_DEV_INITRD +EXTRACONFIG_sh4 = -e CONFIG_BLK_DEV_INITRD -e CONFIG_CMDLINE_FROM_BOOTLOADER +EXTRACONFIG = $(EXTRACONFIG_$(XARCH)) + +# optional tests to run (default = all) +TEST = + +# QEMU_ARCH: arch names used by qemu +QEMU_ARCH_i386 = i386 +QEMU_ARCH_x86_64 = x86_64 +QEMU_ARCH_x32 = x86_64 +QEMU_ARCH_x86 = x86_64 +QEMU_ARCH_arm64 = aarch64 +QEMU_ARCH_arm = arm +QEMU_ARCH_armthumb = arm +QEMU_ARCH_mips32le = mipsel # works with malta_defconfig +QEMU_ARCH_mips32be = mips +QEMU_ARCH_mipsn32le = mips64el +QEMU_ARCH_mipsn32be = mips64 +QEMU_ARCH_mips64le = mips64el +QEMU_ARCH_mips64be = mips64 +QEMU_ARCH_ppc = ppc +QEMU_ARCH_ppc64 = ppc64 +QEMU_ARCH_ppc64le = ppc64 +QEMU_ARCH_riscv = riscv64 +QEMU_ARCH_riscv32 = riscv32 +QEMU_ARCH_riscv64 = riscv64 +QEMU_ARCH_s390x = s390x +QEMU_ARCH_s390 = s390x +QEMU_ARCH_loongarch = loongarch64 +QEMU_ARCH_sparc32 = sparc +QEMU_ARCH_sparc64 = sparc64 +QEMU_ARCH_m68k = m68k +QEMU_ARCH_sh4 = sh4 +QEMU_ARCH = $(QEMU_ARCH_$(XARCH)) + +QEMU_ARCH_USER_ppc64le = ppc64le +QEMU_ARCH_USER_mipsn32le = mipsn32el +QEMU_ARCH_USER_mipsn32be = mipsn32 +QEMU_ARCH_USER = $(or $(QEMU_ARCH_USER_$(XARCH)),$(QEMU_ARCH_$(XARCH))) + +QEMU_BIOS_DIR = /usr/share/edk2/ +QEMU_BIOS_loongarch = $(QEMU_BIOS_DIR)/loongarch64/OVMF_CODE.fd + +ifneq ($(QEMU_BIOS_$(XARCH)),) +QEMU_ARGS_BIOS = -bios $(QEMU_BIOS_$(XARCH)) +endif + +# QEMU_ARGS : some arch-specific args to pass to qemu +QEMU_ARGS_i386 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_x86_64 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_x32 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_x86 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_arm64 = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_arm = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_armthumb = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips32le = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips32be = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mipsn32le = -M malta -cpu 5KEc -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mipsn32be = -M malta -cpu I6400 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips64le = -M malta -cpu I6400 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips64be = -M malta -cpu 5KEc -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv32 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv64 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_s390x = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_s390 = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_sparc32 = -M SS-5 -m 256M -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_sparc64 = -M sun4u -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_m68k = -M virt -append "console=ttyGF0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_sh4 = -M r2d -serial file:/dev/stdout -append "console=ttySC1,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS = -m 1G $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_BIOS) $(QEMU_ARGS_EXTRA) + +# OUTPUT is only set when run from the main makefile, otherwise +# it defaults to this nolibc directory. +OUTPUT ?= $(CURDIR)/ + +ifeq ($(V),1) +Q= +else +Q=@ +endif + +CFLAGS_i386 = $(call cc-option,-m32) +CFLAGS_x32 = -mx32 +CFLAGS_arm = -marm +CFLAGS_armthumb = -mthumb -march=armv6t2 +CFLAGS_ppc = -m32 -mbig-endian -mno-vsx $(call cc-option,-mmultiple) +CFLAGS_ppc64 = -m64 -mbig-endian -mno-vsx $(call cc-option,-mmultiple) +CFLAGS_ppc64le = -m64 -mlittle-endian -mno-vsx $(call cc-option,-mabi=elfv2) +CFLAGS_s390x = -m64 +CFLAGS_s390 = -m31 +CFLAGS_mips32le = -EL -mabi=32 -fPIC +CFLAGS_mips32be = -EB -mabi=32 +CFLAGS_mipsn32le = -EL -mabi=n32 -fPIC -march=mips64r2 +CFLAGS_mipsn32be = -EB -mabi=n32 -march=mips64r6 +CFLAGS_mips64le = -EL -mabi=64 -march=mips64r6 +CFLAGS_mips64be = -EB -mabi=64 -march=mips64r2 +CFLAGS_sparc32 = $(call cc-option,-m32) +CFLAGS_sh4 = -ml -m4 +ifeq ($(origin XARCH),command line) +CFLAGS_XARCH = $(CFLAGS_$(XARCH)) +endif + +include Makefile.include + +CFLAGS ?= $(CFLAGS_NOLIBC_TEST) $(CFLAGS_XARCH) $(CFLAGS_EXTRA) +LDFLAGS := + +LIBGCC := -lgcc + +ifeq ($(ARCH),x86) +# Not needed on x86, probably not present for x32 +LIBGCC := +endif + +ifneq ($(LLVM),) +# Not needed for clang +LIBGCC := +endif + +# Modify CFLAGS based on LLVM= +include $(srctree)/tools/scripts/Makefile.include + +REPORT ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{if (!f) printf("\n"); f++; print;} /\[SKIPPED\][\r]*$$/{s++} \ + /^Total number of errors:/{done++} \ + END{ printf("\n%3d test(s): %3d passed, %3d skipped, %3d failed => status: ", p+s+f, p, s, f); \ + if (f || !p || !done) printf("failure\n"); else if (s) printf("warning\n"); else printf("success\n");; \ + printf("\nSee all results in %s\n", ARGV[1]); }' + +help: + @echo "Supported targets under selftests/nolibc:" + @echo " all call the \"run\" target below" + @echo " help this help" + @echo " sysroot create the nolibc sysroot here (uses \$$ARCH)" + @echo " nolibc-test build the executable (uses \$$CC and \$$CROSS_COMPILE)" + @echo " libc-test build an executable using the compiler's default libc instead" + @echo " run-user runs the executable under QEMU (uses \$$XARCH, \$$TEST)" + @echo " initramfs.cpio prepare the initramfs archive with nolibc-test" + @echo " initramfs prepare the initramfs tree with nolibc-test" + @echo " defconfig create a fresh new default config (uses \$$XARCH)" + @echo " kernel (re)build the kernel (uses \$$XARCH)" + @echo " kernel-standalone (re)build the kernel with the initramfs (uses \$$XARCH)" + @echo " run runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)" + @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)" + @echo " clean clean the sysroot, initramfs, build and output files" + @echo "" + @echo "The output file is \"run.out\". Test ranges may be passed using \$$TEST." + @echo "" + @echo "Currently using the following variables:" + @echo " ARCH = $(ARCH)" + @echo " XARCH = $(XARCH)" + @echo " CROSS_COMPILE = $(CROSS_COMPILE)" + @echo " CC = $(CC)" + @echo " OUTPUT = $(OUTPUT)" + @echo " TEST = $(TEST)" + @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$XARCH]" + @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$XARCH]" + @echo "" + +all: run + +sysroot: sysroot/$(ARCH)/include + +sysroot/$(ARCH)/include: + $(Q)rm -rf sysroot/$(ARCH) sysroot/sysroot + $(QUIET_MKDIR)mkdir -p sysroot + $(Q)$(MAKE) -C $(srctree) outputmakefile + $(Q)$(MAKE) -C $(srctree)/tools/include/nolibc ARCH=$(ARCH) OUTPUT=$(CURDIR)/sysroot/ headers_standalone headers_check + $(Q)mv sysroot/sysroot sysroot/$(ARCH) + +ifneq ($(NOLIBC_SYSROOT),0) +nolibc-test: nolibc-test.c nolibc-test-linkage.c sysroot/$(ARCH)/include + $(QUIET_CC)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ \ + -nostdlib -nostdinc -static -Isysroot/$(ARCH)/include nolibc-test.c nolibc-test-linkage.c $(LIBGCC) +else +nolibc-test: nolibc-test.c nolibc-test-linkage.c + $(QUIET_CC)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ \ + -nostdlib -static -include $(srctree)/tools/include/nolibc/nolibc.h nolibc-test.c nolibc-test-linkage.c $(LIBGCC) +endif + +libc-test: nolibc-test.c nolibc-test-linkage.c + $(QUIET_CC)$(HOSTCC) -o $@ nolibc-test.c nolibc-test-linkage.c + +# local libc-test +run-libc-test: libc-test + $(Q)./libc-test > "$(CURDIR)/run.out" || : + $(Q)$(REPORT) $(CURDIR)/run.out + +# local nolibc-test +run-nolibc-test: nolibc-test + $(Q)./nolibc-test > "$(CURDIR)/run.out" || : + $(Q)$(REPORT) $(CURDIR)/run.out + +# qemu user-land test +run-user: nolibc-test + $(Q)qemu-$(QEMU_ARCH_USER) ./nolibc-test > "$(CURDIR)/run.out" || : + $(Q)$(REPORT) $(CURDIR)/run.out + +initramfs.cpio: kernel nolibc-test + $(QUIET_GEN)echo 'file /init nolibc-test 755 0 0' | $(objtree)/usr/gen_init_cpio - > initramfs.cpio + +initramfs: nolibc-test + $(QUIET_MKDIR)mkdir -p initramfs + $(call QUIET_INSTALL, initramfs/init) + $(Q)cp nolibc-test initramfs/init + +defconfig: + $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(DEFCONFIG) + $(Q)if [ -n "$(EXTRACONFIG)" ]; then \ + $(srctree)/scripts/config --file $(objtree)/.config $(EXTRACONFIG); \ + $(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) olddefconfig < /dev/null; \ + fi + +kernel: + $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) < /dev/null + +kernel-standalone: initramfs + $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs < /dev/null + +# run the tests after building the kernel +run: kernel initramfs.cpio + $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(IMAGE)" -initrd initramfs.cpio -serial file:/dev/stdout $(QEMU_ARGS) > "$(CURDIR)/run.out" + $(Q)$(REPORT) $(CURDIR)/run.out + +# re-run the tests from an existing kernel +rerun: + $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(IMAGE)" -initrd initramfs.cpio -serial file:/dev/stdout $(QEMU_ARGS) > "$(CURDIR)/run.out" + $(Q)$(REPORT) $(CURDIR)/run.out + +# report with existing test log +report: + $(Q)$(REPORT) $(CURDIR)/run.out + +clean: + $(call QUIET_CLEAN, sysroot) + $(Q)rm -rf sysroot + $(call QUIET_CLEAN, nolibc-test) + $(Q)rm -f nolibc-test + $(call QUIET_CLEAN, libc-test) + $(Q)rm -f libc-test + $(call QUIET_CLEAN, initramfs.cpio) + $(Q)rm -rf initramfs.cpio + $(call QUIET_CLEAN, initramfs) + $(Q)rm -rf initramfs + $(call QUIET_CLEAN, run.out) + $(Q)rm -rf run.out + +.PHONY: sysroot/$(ARCH)/include |