diff options
Diffstat (limited to 'tools/testing/selftests/nolibc')
| -rw-r--r-- | tools/testing/selftests/nolibc/Makefile | 343 | ||||
| -rw-r--r-- | tools/testing/selftests/nolibc/Makefile.include | 10 | ||||
| -rw-r--r-- | tools/testing/selftests/nolibc/Makefile.nolibc | 383 | ||||
| -rw-r--r-- | tools/testing/selftests/nolibc/nolibc-test.c | 53 | ||||
| -rwxr-xr-x | tools/testing/selftests/nolibc/run-tests.sh | 14 |
5 files changed, 464 insertions, 339 deletions
diff --git a/tools/testing/selftests/nolibc/Makefile b/tools/testing/selftests/nolibc/Makefile index 94176ffe4646..40f5c2908dda 100644 --- a/tools/testing/selftests/nolibc/Makefile +++ b/tools/testing/selftests/nolibc/Makefile @@ -1,341 +1,26 @@ # SPDX-License-Identifier: GPL-2.0 -# Makefile for nolibc tests -# we're in ".../tools/testing/selftests/nolibc" -ifeq ($(srctree),) -srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR))) -endif - -include $(srctree)/tools/scripts/utilities.mak -# We need this for the "__cc-option" macro. -include $(srctree)/scripts/Makefile.compiler - -ifneq ($(O),) -ifneq ($(call is-absolute,$(O)),y) -$(error Only absolute O= parameters are supported) -endif -objtree := $(O) -else -objtree ?= $(srctree) -endif - -ifeq ($(ARCH),) -include $(srctree)/scripts/subarch.include -ARCH = $(SUBARCH) -endif - -cc-option = $(call __cc-option, $(CC),$(CLANG_CROSS_FLAGS),$(1),$(2)) - -# XARCH extends the kernel's ARCH with a few variants of the same -# architecture that only differ by the configuration, the toolchain -# and the Qemu program used. It is copied as-is into ARCH except for -# a few specific values which are mapped like this: -# -# XARCH | ARCH | config -# -------------|-----------|------------------------- -# ppc | powerpc | 32 bits -# ppc64 | powerpc | 64 bits big endian -# ppc64le | powerpc | 64 bits little endian -# -# It is recommended to only use XARCH, though it does not harm if -# ARCH is already set. For simplicity, ARCH is sufficient for all -# architectures where both are equal. - -# configure default variants for target kernel supported architectures -XARCH_powerpc = ppc -XARCH_mips = mips32le -XARCH_riscv = riscv64 -XARCH = $(or $(XARCH_$(ARCH)),$(ARCH)) - -# map from user input variants to their kernel supported architectures -ARCH_armthumb = arm -ARCH_ppc = powerpc -ARCH_ppc64 = powerpc -ARCH_ppc64le = powerpc -ARCH_mips32le = mips -ARCH_mips32be = mips -ARCH_riscv32 = riscv -ARCH_riscv64 = riscv -ARCH_s390x = s390 -ARCH_sparc32 = sparc -ARCH_sparc64 = sparc -ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) -# kernel image names by architecture -IMAGE_i386 = arch/x86/boot/bzImage -IMAGE_x86_64 = arch/x86/boot/bzImage -IMAGE_x86 = arch/x86/boot/bzImage -IMAGE_arm64 = arch/arm64/boot/Image -IMAGE_arm = arch/arm/boot/zImage -IMAGE_armthumb = arch/arm/boot/zImage -IMAGE_mips32le = vmlinuz -IMAGE_mips32be = vmlinuz -IMAGE_ppc = vmlinux -IMAGE_ppc64 = vmlinux -IMAGE_ppc64le = arch/powerpc/boot/zImage -IMAGE_riscv = arch/riscv/boot/Image -IMAGE_riscv32 = arch/riscv/boot/Image -IMAGE_riscv64 = arch/riscv/boot/Image -IMAGE_s390x = arch/s390/boot/bzImage -IMAGE_s390 = arch/s390/boot/bzImage -IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi -IMAGE_sparc32 = arch/sparc/boot/image -IMAGE_sparc64 = arch/sparc/boot/image -IMAGE_m68k = vmlinux -IMAGE = $(objtree)/$(IMAGE_$(XARCH)) -IMAGE_NAME = $(notdir $(IMAGE)) +TEST_GEN_PROGS := nolibc-test -# default kernel configurations that appear to be usable -DEFCONFIG_i386 = defconfig -DEFCONFIG_x86_64 = defconfig -DEFCONFIG_x86 = defconfig -DEFCONFIG_arm64 = defconfig -DEFCONFIG_arm = multi_v7_defconfig -DEFCONFIG_armthumb = multi_v7_defconfig -DEFCONFIG_mips32le = malta_defconfig -DEFCONFIG_mips32be = malta_defconfig generic/eb.config -DEFCONFIG_ppc = pmac32_defconfig -DEFCONFIG_ppc64 = powernv_be_defconfig -DEFCONFIG_ppc64le = powernv_defconfig -DEFCONFIG_riscv = defconfig -DEFCONFIG_riscv32 = rv32_defconfig -DEFCONFIG_riscv64 = defconfig -DEFCONFIG_s390x = defconfig -DEFCONFIG_s390 = defconfig compat.config -DEFCONFIG_loongarch = defconfig -DEFCONFIG_sparc32 = sparc32_defconfig -DEFCONFIG_sparc64 = sparc64_defconfig -DEFCONFIG_m68k = virt_defconfig -DEFCONFIG = $(DEFCONFIG_$(XARCH)) +include ../lib.mk +include $(top_srcdir)/scripts/Makefile.compiler -EXTRACONFIG_m68k = -e CONFIG_BLK_DEV_INITRD -EXTRACONFIG = $(EXTRACONFIG_$(XARCH)) -EXTRACONFIG_arm = -e CONFIG_NAMESPACES -EXTRACONFIG_armthumb = -e CONFIG_NAMESPACES - -# optional tests to run (default = all) -TEST = - -# QEMU_ARCH: arch names used by qemu -QEMU_ARCH_i386 = i386 -QEMU_ARCH_x86_64 = x86_64 -QEMU_ARCH_x86 = x86_64 -QEMU_ARCH_arm64 = aarch64 -QEMU_ARCH_arm = arm -QEMU_ARCH_armthumb = arm -QEMU_ARCH_mips32le = mipsel # works with malta_defconfig -QEMU_ARCH_mips32be = mips -QEMU_ARCH_ppc = ppc -QEMU_ARCH_ppc64 = ppc64 -QEMU_ARCH_ppc64le = ppc64 -QEMU_ARCH_riscv = riscv64 -QEMU_ARCH_riscv32 = riscv32 -QEMU_ARCH_riscv64 = riscv64 -QEMU_ARCH_s390x = s390x -QEMU_ARCH_s390 = s390x -QEMU_ARCH_loongarch = loongarch64 -QEMU_ARCH_sparc32 = sparc -QEMU_ARCH_sparc64 = sparc64 -QEMU_ARCH_m68k = m68k -QEMU_ARCH = $(QEMU_ARCH_$(XARCH)) - -QEMU_ARCH_USER_ppc64le = ppc64le -QEMU_ARCH_USER = $(or $(QEMU_ARCH_USER_$(XARCH)),$(QEMU_ARCH_$(XARCH))) - -QEMU_BIOS_DIR = /usr/share/edk2/ -QEMU_BIOS_loongarch = $(QEMU_BIOS_DIR)/loongarch64/OVMF_CODE.fd - -ifneq ($(QEMU_BIOS_$(XARCH)),) -QEMU_ARGS_BIOS = -bios $(QEMU_BIOS_$(XARCH)) -endif - -# QEMU_ARGS : some arch-specific args to pass to qemu -QEMU_ARGS_i386 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_x86_64 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_x86 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_arm64 = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_arm = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_armthumb = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_mips32le = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_mips32be = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_riscv32 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_riscv64 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_s390x = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_s390 = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_sparc32 = -M SS-5 -m 256M -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_sparc64 = -M sun4u -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS_m68k = -M virt -append "console=ttyGF0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" -QEMU_ARGS = -m 1G $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_BIOS) $(QEMU_ARGS_EXTRA) - -# OUTPUT is only set when run from the main makefile, otherwise -# it defaults to this nolibc directory. -OUTPUT ?= $(CURDIR)/ - -ifeq ($(V),1) -Q= -else -Q=@ -endif +cc-option = $(call __cc-option, $(CC),,$(1),$(2)) -CFLAGS_i386 = $(call cc-option,-m32) -CFLAGS_arm = -marm -CFLAGS_armthumb = -mthumb -march=armv6t2 -CFLAGS_ppc = -m32 -mbig-endian -mno-vsx $(call cc-option,-mmultiple) -CFLAGS_ppc64 = -m64 -mbig-endian -mno-vsx $(call cc-option,-mmultiple) -CFLAGS_ppc64le = -m64 -mlittle-endian -mno-vsx $(call cc-option,-mabi=elfv2) -CFLAGS_s390x = -m64 -CFLAGS_s390 = -m31 -CFLAGS_mips32le = -EL -mabi=32 -fPIC -CFLAGS_mips32be = -EB -mabi=32 -CFLAGS_sparc32 = $(call cc-option,-m32) -ifeq ($(origin XARCH),command line) -CFLAGS_XARCH = $(CFLAGS_$(XARCH)) -endif -CFLAGS_STACKPROTECTOR ?= $(call cc-option,-mstack-protector-guard=global $(call cc-option,-fstack-protector-all)) -CFLAGS_SANITIZER ?= $(call cc-option,-fsanitize=undefined -fsanitize-trap=all) -CFLAGS ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 -W -Wall -Wextra \ - $(call cc-option,-fno-stack-protector) $(call cc-option,-Wmissing-prototypes) \ - $(CFLAGS_XARCH) $(CFLAGS_STACKPROTECTOR) $(CFLAGS_SANITIZER) $(CFLAGS_EXTRA) -LDFLAGS := +include Makefile.include -LIBGCC := -lgcc +CFLAGS = -nostdlib -nostdinc -static \ + -isystem $(top_srcdir)/tools/include/nolibc -isystem $(top_srcdir)/usr/include \ + $(CFLAGS_NOLIBC_TEST) -ifneq ($(LLVM),) -# Not needed for clang -LIBGCC := +ifeq ($(LLVM),) +LDLIBS := -lgcc endif -# Modify CFLAGS based on LLVM= -include $(srctree)/tools/scripts/Makefile.include - -# GCC uses "s390", clang "systemz" -CLANG_CROSS_FLAGS := $(subst --target=s390-linux,--target=systemz-linux,$(CLANG_CROSS_FLAGS)) - -REPORT ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{if (!f) printf("\n"); f++; print;} /\[SKIPPED\][\r]*$$/{s++} \ - END{ printf("\n%3d test(s): %3d passed, %3d skipped, %3d failed => status: ", p+s+f, p, s, f); \ - if (f || !p) printf("failure\n"); else if (s) printf("warning\n"); else printf("success\n");; \ - printf("\nSee all results in %s\n", ARGV[1]); }' +$(OUTPUT)/nolibc-test: nolibc-test.c nolibc-test-linkage.c | headers help: - @echo "Supported targets under selftests/nolibc:" - @echo " all call the \"run\" target below" - @echo " help this help" - @echo " sysroot create the nolibc sysroot here (uses \$$ARCH)" - @echo " nolibc-test build the executable (uses \$$CC and \$$CROSS_COMPILE)" - @echo " libc-test build an executable using the compiler's default libc instead" - @echo " run-user runs the executable under QEMU (uses \$$XARCH, \$$TEST)" - @echo " initramfs.cpio prepare the initramfs archive with nolibc-test" - @echo " initramfs prepare the initramfs tree with nolibc-test" - @echo " defconfig create a fresh new default config (uses \$$XARCH)" - @echo " kernel (re)build the kernel (uses \$$XARCH)" - @echo " kernel-standalone (re)build the kernel with the initramfs (uses \$$XARCH)" - @echo " run runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)" - @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)" - @echo " clean clean the sysroot, initramfs, build and output files" - @echo "" - @echo "The output file is \"run.out\". Test ranges may be passed using \$$TEST." - @echo "" - @echo "Currently using the following variables:" - @echo " ARCH = $(ARCH)" - @echo " XARCH = $(XARCH)" - @echo " CROSS_COMPILE = $(CROSS_COMPILE)" - @echo " CC = $(CC)" - @echo " OUTPUT = $(OUTPUT)" - @echo " TEST = $(TEST)" - @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$XARCH]" - @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$XARCH]" - @echo "" - -all: run - -sysroot: sysroot/$(ARCH)/include - -sysroot/$(ARCH)/include: - $(Q)rm -rf sysroot/$(ARCH) sysroot/sysroot - $(QUIET_MKDIR)mkdir -p sysroot - $(Q)$(MAKE) -C $(srctree) outputmakefile - $(Q)$(MAKE) -C $(srctree)/tools/include/nolibc ARCH=$(ARCH) OUTPUT=$(CURDIR)/sysroot/ headers_standalone headers_check - $(Q)mv sysroot/sysroot sysroot/$(ARCH) - -ifneq ($(NOLIBC_SYSROOT),0) -nolibc-test: nolibc-test.c nolibc-test-linkage.c sysroot/$(ARCH)/include - $(QUIET_CC)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ \ - -nostdlib -nostdinc -static -Isysroot/$(ARCH)/include nolibc-test.c nolibc-test-linkage.c $(LIBGCC) -else -nolibc-test: nolibc-test.c nolibc-test-linkage.c - $(QUIET_CC)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ \ - -nostdlib -static -include $(srctree)/tools/include/nolibc/nolibc.h nolibc-test.c nolibc-test-linkage.c $(LIBGCC) -endif - -libc-test: nolibc-test.c nolibc-test-linkage.c - $(QUIET_CC)$(HOSTCC) -o $@ nolibc-test.c nolibc-test-linkage.c - -# local libc-test -run-libc-test: libc-test - $(Q)./libc-test > "$(CURDIR)/run.out" || : - $(Q)$(REPORT) $(CURDIR)/run.out - -# local nolibc-test -run-nolibc-test: nolibc-test - $(Q)./nolibc-test > "$(CURDIR)/run.out" || : - $(Q)$(REPORT) $(CURDIR)/run.out - -# qemu user-land test -run-user: nolibc-test - $(Q)qemu-$(QEMU_ARCH_USER) ./nolibc-test > "$(CURDIR)/run.out" || : - $(Q)$(REPORT) $(CURDIR)/run.out - -initramfs.cpio: kernel nolibc-test - $(QUIET_GEN)echo 'file /init nolibc-test 755 0 0' | $(objtree)/usr/gen_init_cpio - > initramfs.cpio - -initramfs: nolibc-test - $(QUIET_MKDIR)mkdir -p initramfs - $(call QUIET_INSTALL, initramfs/init) - $(Q)cp nolibc-test initramfs/init - -defconfig: - $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(DEFCONFIG) - $(Q)if [ -n "$(EXTRACONFIG)" ]; then \ - $(srctree)/scripts/config --file $(objtree)/.config $(EXTRACONFIG); \ - $(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) olddefconfig < /dev/null; \ - fi - -kernel: | defconfig - $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) < /dev/null - -kernel-standalone: initramfs | defconfig - $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs < /dev/null - -# run the tests after building the kernel -run: kernel initramfs.cpio - $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(IMAGE)" -initrd initramfs.cpio -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" - $(Q)$(REPORT) $(CURDIR)/run.out - -# re-run the tests from an existing kernel -rerun: - $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(IMAGE)" -initrd initramfs.cpio -serial stdio $(QEMU_ARGS) > "$(CURDIR)/run.out" - $(Q)$(REPORT) $(CURDIR)/run.out - -# report with existing test log -report: - $(Q)$(REPORT) $(CURDIR)/run.out - -clean: - $(call QUIET_CLEAN, sysroot) - $(Q)rm -rf sysroot - $(call QUIET_CLEAN, nolibc-test) - $(Q)rm -f nolibc-test - $(call QUIET_CLEAN, libc-test) - $(Q)rm -f libc-test - $(call QUIET_CLEAN, initramfs.cpio) - $(Q)rm -rf initramfs.cpio - $(call QUIET_CLEAN, initramfs) - $(Q)rm -rf initramfs - $(call QUIET_CLEAN, run.out) - $(Q)rm -rf run.out + @echo "For the custom nolibc testsuite use '$(MAKE) -f Makefile.nolibc'; available targets:" + @$(MAKE) -f Makefile.nolibc help -.PHONY: sysroot/$(ARCH)/include +.PHONY: help diff --git a/tools/testing/selftests/nolibc/Makefile.include b/tools/testing/selftests/nolibc/Makefile.include new file mode 100644 index 000000000000..66287fafbbe0 --- /dev/null +++ b/tools/testing/selftests/nolibc/Makefile.include @@ -0,0 +1,10 @@ +# SPDX-License-Identifier: GPL-2.0 + +__CFLAGS_STACKPROTECTOR = $(call cc-option,-fstack-protector-all) $(call cc-option,-mstack-protector-guard=global) +_CFLAGS_STACKPROTECTOR ?= $(call try-run, \ + echo 'void foo(void) {}' | $(CC) -x c - -o - -S $(CLANG_CROSS_FLAGS) $(__CFLAGS_STACKPROTECTOR) | grep -q __stack_chk_guard, \ + $(__CFLAGS_STACKPROTECTOR)) +_CFLAGS_SANITIZER ?= $(call cc-option,-fsanitize=undefined -fsanitize-trap=all) +CFLAGS_NOLIBC_TEST ?= -Os -fno-ident -fno-asynchronous-unwind-tables -std=c89 -W -Wall -Wextra \ + $(call cc-option,-fno-stack-protector) $(call cc-option,-Wmissing-prototypes) \ + $(_CFLAGS_STACKPROTECTOR) $(_CFLAGS_SANITIZER) diff --git a/tools/testing/selftests/nolibc/Makefile.nolibc b/tools/testing/selftests/nolibc/Makefile.nolibc new file mode 100644 index 000000000000..0fb759ba992e --- /dev/null +++ b/tools/testing/selftests/nolibc/Makefile.nolibc @@ -0,0 +1,383 @@ +# SPDX-License-Identifier: GPL-2.0 +# Makefile for nolibc tests +# we're in ".../tools/testing/selftests/nolibc" +ifeq ($(srctree),) +srctree := $(patsubst %/tools/testing/selftests/,%,$(dir $(CURDIR))) +endif + +include $(srctree)/tools/scripts/utilities.mak +# We need this for the "__cc-option" macro. +include $(srctree)/scripts/Makefile.compiler + +ifneq ($(O),) +ifneq ($(call is-absolute,$(O)),y) +$(error Only absolute O= parameters are supported) +endif +objtree := $(O) +else +objtree ?= $(srctree) +endif + +ifeq ($(ARCH),) +include $(srctree)/scripts/subarch.include +ARCH = $(SUBARCH) +endif + +cc-option = $(call __cc-option, $(CC),$(CLANG_CROSS_FLAGS),$(1),$(2)) + +# XARCH extends the kernel's ARCH with a few variants of the same +# architecture that only differ by the configuration, the toolchain +# and the Qemu program used. It is copied as-is into ARCH except for +# a few specific values which are mapped like this: +# +# XARCH | ARCH | config +# -------------|-----------|------------------------- +# ppc | powerpc | 32 bits +# ppc64 | powerpc | 64 bits big endian +# ppc64le | powerpc | 64 bits little endian +# +# It is recommended to only use XARCH, though it does not harm if +# ARCH is already set. For simplicity, ARCH is sufficient for all +# architectures where both are equal. + +# configure default variants for target kernel supported architectures +XARCH_powerpc = ppc +XARCH_mips = mips32le +XARCH_riscv = riscv64 +XARCH = $(or $(XARCH_$(ARCH)),$(ARCH)) + +# map from user input variants to their kernel supported architectures +ARCH_x32 = x86 +ARCH_armthumb = arm +ARCH_ppc = powerpc +ARCH_ppc64 = powerpc +ARCH_ppc64le = powerpc +ARCH_mips32le = mips +ARCH_mips32be = mips +ARCH_mipsn32le = mips +ARCH_mipsn32be = mips +ARCH_mips64le = mips +ARCH_mips64be = mips +ARCH_riscv32 = riscv +ARCH_riscv64 = riscv +ARCH_s390x = s390 +ARCH_sparc32 = sparc +ARCH_sparc64 = sparc +ARCH_sh4 = sh +ARCH := $(or $(ARCH_$(XARCH)),$(XARCH)) + +# kernel image names by architecture +IMAGE_i386 = arch/x86/boot/bzImage +IMAGE_x86_64 = arch/x86/boot/bzImage +IMAGE_x32 = arch/x86/boot/bzImage +IMAGE_x86 = arch/x86/boot/bzImage +IMAGE_arm64 = arch/arm64/boot/Image +IMAGE_arm = arch/arm/boot/zImage +IMAGE_armthumb = arch/arm/boot/zImage +IMAGE_mips32le = vmlinuz +IMAGE_mips32be = vmlinuz +IMAGE_mipsn32le = vmlinuz +IMAGE_mipsn32be = vmlinuz +IMAGE_mips64le = vmlinuz +IMAGE_mips64be = vmlinuz +IMAGE_ppc = vmlinux +IMAGE_ppc64 = vmlinux +IMAGE_ppc64le = arch/powerpc/boot/zImage +IMAGE_riscv = arch/riscv/boot/Image +IMAGE_riscv32 = arch/riscv/boot/Image +IMAGE_riscv64 = arch/riscv/boot/Image +IMAGE_s390x = arch/s390/boot/bzImage +IMAGE_s390 = arch/s390/boot/bzImage +IMAGE_loongarch = arch/loongarch/boot/vmlinuz.efi +IMAGE_sparc32 = arch/sparc/boot/image +IMAGE_sparc64 = arch/sparc/boot/image +IMAGE_m68k = vmlinux +IMAGE_sh4 = arch/sh/boot/zImage +IMAGE = $(objtree)/$(IMAGE_$(XARCH)) +IMAGE_NAME = $(notdir $(IMAGE)) + +# default kernel configurations that appear to be usable +DEFCONFIG_i386 = defconfig +DEFCONFIG_x86_64 = defconfig +DEFCONFIG_x32 = defconfig +DEFCONFIG_x86 = defconfig +DEFCONFIG_arm64 = defconfig +DEFCONFIG_arm = multi_v7_defconfig +DEFCONFIG_armthumb = multi_v7_defconfig +DEFCONFIG_mips32le = malta_defconfig +DEFCONFIG_mips32be = malta_defconfig generic/eb.config +DEFCONFIG_mipsn32le = malta_defconfig generic/64r2.config +DEFCONFIG_mipsn32be = malta_defconfig generic/64r6.config generic/eb.config +DEFCONFIG_mips64le = malta_defconfig generic/64r6.config +DEFCONFIG_mips64be = malta_defconfig generic/64r2.config generic/eb.config +DEFCONFIG_ppc = pmac32_defconfig +DEFCONFIG_ppc64 = powernv_be_defconfig +DEFCONFIG_ppc64le = powernv_defconfig +DEFCONFIG_riscv = defconfig +DEFCONFIG_riscv32 = rv32_defconfig +DEFCONFIG_riscv64 = defconfig +DEFCONFIG_s390x = defconfig +DEFCONFIG_s390 = defconfig compat.config +DEFCONFIG_loongarch = defconfig +DEFCONFIG_sparc32 = sparc32_defconfig +DEFCONFIG_sparc64 = sparc64_defconfig +DEFCONFIG_m68k = virt_defconfig +DEFCONFIG_sh4 = rts7751r2dplus_defconfig +DEFCONFIG = $(DEFCONFIG_$(XARCH)) + +EXTRACONFIG_x32 = -e CONFIG_X86_X32_ABI +EXTRACONFIG_arm = -e CONFIG_NAMESPACES +EXTRACONFIG_armthumb = -e CONFIG_NAMESPACES +EXTRACONFIG_m68k = -e CONFIG_BLK_DEV_INITRD +EXTRACONFIG_sh4 = -e CONFIG_BLK_DEV_INITRD -e CONFIG_CMDLINE_FROM_BOOTLOADER +EXTRACONFIG = $(EXTRACONFIG_$(XARCH)) + +# optional tests to run (default = all) +TEST = + +# QEMU_ARCH: arch names used by qemu +QEMU_ARCH_i386 = i386 +QEMU_ARCH_x86_64 = x86_64 +QEMU_ARCH_x32 = x86_64 +QEMU_ARCH_x86 = x86_64 +QEMU_ARCH_arm64 = aarch64 +QEMU_ARCH_arm = arm +QEMU_ARCH_armthumb = arm +QEMU_ARCH_mips32le = mipsel # works with malta_defconfig +QEMU_ARCH_mips32be = mips +QEMU_ARCH_mipsn32le = mips64el +QEMU_ARCH_mipsn32be = mips64 +QEMU_ARCH_mips64le = mips64el +QEMU_ARCH_mips64be = mips64 +QEMU_ARCH_ppc = ppc +QEMU_ARCH_ppc64 = ppc64 +QEMU_ARCH_ppc64le = ppc64 +QEMU_ARCH_riscv = riscv64 +QEMU_ARCH_riscv32 = riscv32 +QEMU_ARCH_riscv64 = riscv64 +QEMU_ARCH_s390x = s390x +QEMU_ARCH_s390 = s390x +QEMU_ARCH_loongarch = loongarch64 +QEMU_ARCH_sparc32 = sparc +QEMU_ARCH_sparc64 = sparc64 +QEMU_ARCH_m68k = m68k +QEMU_ARCH_sh4 = sh4 +QEMU_ARCH = $(QEMU_ARCH_$(XARCH)) + +QEMU_ARCH_USER_ppc64le = ppc64le +QEMU_ARCH_USER_mipsn32le = mipsn32el +QEMU_ARCH_USER_mipsn32be = mipsn32 +QEMU_ARCH_USER = $(or $(QEMU_ARCH_USER_$(XARCH)),$(QEMU_ARCH_$(XARCH))) + +QEMU_BIOS_DIR = /usr/share/edk2/ +QEMU_BIOS_loongarch = $(QEMU_BIOS_DIR)/loongarch64/OVMF_CODE.fd + +ifneq ($(QEMU_BIOS_$(XARCH)),) +QEMU_ARGS_BIOS = -bios $(QEMU_BIOS_$(XARCH)) +endif + +# QEMU_ARGS : some arch-specific args to pass to qemu +QEMU_ARGS_i386 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_x86_64 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_x32 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_x86 = -M pc -append "console=ttyS0,9600 i8042.noaux panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_arm64 = -M virt -cpu cortex-a53 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_arm = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_armthumb = -M virt -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips32le = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips32be = -M malta -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mipsn32le = -M malta -cpu 5KEc -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mipsn32be = -M malta -cpu I6400 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips64le = -M malta -cpu I6400 -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_mips64be = -M malta -cpu 5KEc -append "panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc = -M g3beige -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc64 = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_ppc64le = -M powernv -append "console=hvc0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv32 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_riscv64 = -M virt -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_s390x = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_s390 = -M s390-ccw-virtio -append "console=ttyS0 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_loongarch = -M virt -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_sparc32 = -M SS-5 -m 256M -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_sparc64 = -M sun4u -append "console=ttyS0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_m68k = -M virt -append "console=ttyGF0,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS_sh4 = -M r2d -serial file:/dev/stdout -append "console=ttySC1,115200 panic=-1 $(TEST:%=NOLIBC_TEST=%)" +QEMU_ARGS = -m 1G $(QEMU_ARGS_$(XARCH)) $(QEMU_ARGS_BIOS) $(QEMU_ARGS_EXTRA) + +# OUTPUT is only set when run from the main makefile, otherwise +# it defaults to this nolibc directory. +OUTPUT ?= $(CURDIR)/ + +ifeq ($(V),1) +Q= +else +Q=@ +endif + +CFLAGS_i386 = $(call cc-option,-m32) +CFLAGS_x32 = -mx32 +CFLAGS_arm = -marm +CFLAGS_armthumb = -mthumb -march=armv6t2 +CFLAGS_ppc = -m32 -mbig-endian -mno-vsx $(call cc-option,-mmultiple) +CFLAGS_ppc64 = -m64 -mbig-endian -mno-vsx $(call cc-option,-mmultiple) +CFLAGS_ppc64le = -m64 -mlittle-endian -mno-vsx $(call cc-option,-mabi=elfv2) +CFLAGS_s390x = -m64 +CFLAGS_s390 = -m31 +CFLAGS_mips32le = -EL -mabi=32 -fPIC +CFLAGS_mips32be = -EB -mabi=32 +CFLAGS_mipsn32le = -EL -mabi=n32 -fPIC -march=mips64r2 +CFLAGS_mipsn32be = -EB -mabi=n32 -march=mips64r6 +CFLAGS_mips64le = -EL -mabi=64 -march=mips64r6 +CFLAGS_mips64be = -EB -mabi=64 -march=mips64r2 +CFLAGS_sparc32 = $(call cc-option,-m32) +CFLAGS_sh4 = -ml -m4 +ifeq ($(origin XARCH),command line) +CFLAGS_XARCH = $(CFLAGS_$(XARCH)) +endif + +include Makefile.include + +CFLAGS ?= $(CFLAGS_NOLIBC_TEST) $(CFLAGS_XARCH) $(CFLAGS_EXTRA) +LDFLAGS := + +LIBGCC := -lgcc + +ifeq ($(ARCH),x86) +# Not needed on x86, probably not present for x32 +LIBGCC := +endif + +ifneq ($(LLVM),) +# Not needed for clang +LIBGCC := +endif + +# Modify CFLAGS based on LLVM= +include $(srctree)/tools/scripts/Makefile.include + +REPORT ?= awk '/\[OK\][\r]*$$/{p++} /\[FAIL\][\r]*$$/{if (!f) printf("\n"); f++; print;} /\[SKIPPED\][\r]*$$/{s++} \ + /^Total number of errors:/{done++} \ + END{ printf("\n%3d test(s): %3d passed, %3d skipped, %3d failed => status: ", p+s+f, p, s, f); \ + if (f || !p || !done) printf("failure\n"); else if (s) printf("warning\n"); else printf("success\n");; \ + printf("\nSee all results in %s\n", ARGV[1]); }' + +help: + @echo "Supported targets under selftests/nolibc:" + @echo " all call the \"run\" target below" + @echo " help this help" + @echo " sysroot create the nolibc sysroot here (uses \$$ARCH)" + @echo " nolibc-test build the executable (uses \$$CC and \$$CROSS_COMPILE)" + @echo " libc-test build an executable using the compiler's default libc instead" + @echo " run-user runs the executable under QEMU (uses \$$XARCH, \$$TEST)" + @echo " initramfs.cpio prepare the initramfs archive with nolibc-test" + @echo " initramfs prepare the initramfs tree with nolibc-test" + @echo " defconfig create a fresh new default config (uses \$$XARCH)" + @echo " kernel (re)build the kernel (uses \$$XARCH)" + @echo " kernel-standalone (re)build the kernel with the initramfs (uses \$$XARCH)" + @echo " run runs the kernel in QEMU after building it (uses \$$XARCH, \$$TEST)" + @echo " rerun runs a previously prebuilt kernel in QEMU (uses \$$XARCH, \$$TEST)" + @echo " clean clean the sysroot, initramfs, build and output files" + @echo "" + @echo "The output file is \"run.out\". Test ranges may be passed using \$$TEST." + @echo "" + @echo "Currently using the following variables:" + @echo " ARCH = $(ARCH)" + @echo " XARCH = $(XARCH)" + @echo " CROSS_COMPILE = $(CROSS_COMPILE)" + @echo " CC = $(CC)" + @echo " OUTPUT = $(OUTPUT)" + @echo " TEST = $(TEST)" + @echo " QEMU_ARCH = $(if $(QEMU_ARCH),$(QEMU_ARCH),UNKNOWN_ARCH) [determined from \$$XARCH]" + @echo " IMAGE_NAME = $(if $(IMAGE_NAME),$(IMAGE_NAME),UNKNOWN_ARCH) [determined from \$$XARCH]" + @echo "" + +all: run + +sysroot: sysroot/$(ARCH)/include + +sysroot/$(ARCH)/include: + $(Q)rm -rf sysroot/$(ARCH) sysroot/sysroot + $(QUIET_MKDIR)mkdir -p sysroot + $(Q)$(MAKE) -C $(srctree) outputmakefile + $(Q)$(MAKE) -C $(srctree)/tools/include/nolibc ARCH=$(ARCH) OUTPUT=$(CURDIR)/sysroot/ headers_standalone headers_check + $(Q)mv sysroot/sysroot sysroot/$(ARCH) + +ifneq ($(NOLIBC_SYSROOT),0) +nolibc-test: nolibc-test.c nolibc-test-linkage.c sysroot/$(ARCH)/include + $(QUIET_CC)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ \ + -nostdlib -nostdinc -static -Isysroot/$(ARCH)/include nolibc-test.c nolibc-test-linkage.c $(LIBGCC) +else +nolibc-test: nolibc-test.c nolibc-test-linkage.c + $(QUIET_CC)$(CC) $(CFLAGS) $(LDFLAGS) -o $@ \ + -nostdlib -static -include $(srctree)/tools/include/nolibc/nolibc.h nolibc-test.c nolibc-test-linkage.c $(LIBGCC) +endif + +libc-test: nolibc-test.c nolibc-test-linkage.c + $(QUIET_CC)$(HOSTCC) -o $@ nolibc-test.c nolibc-test-linkage.c + +# local libc-test +run-libc-test: libc-test + $(Q)./libc-test > "$(CURDIR)/run.out" || : + $(Q)$(REPORT) $(CURDIR)/run.out + +# local nolibc-test +run-nolibc-test: nolibc-test + $(Q)./nolibc-test > "$(CURDIR)/run.out" || : + $(Q)$(REPORT) $(CURDIR)/run.out + +# qemu user-land test +run-user: nolibc-test + $(Q)qemu-$(QEMU_ARCH_USER) ./nolibc-test > "$(CURDIR)/run.out" || : + $(Q)$(REPORT) $(CURDIR)/run.out + +initramfs.cpio: kernel nolibc-test + $(QUIET_GEN)echo 'file /init nolibc-test 755 0 0' | $(objtree)/usr/gen_init_cpio - > initramfs.cpio + +initramfs: nolibc-test + $(QUIET_MKDIR)mkdir -p initramfs + $(call QUIET_INSTALL, initramfs/init) + $(Q)cp nolibc-test initramfs/init + +defconfig: + $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(DEFCONFIG) + $(Q)if [ -n "$(EXTRACONFIG)" ]; then \ + $(srctree)/scripts/config --file $(objtree)/.config $(EXTRACONFIG); \ + $(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) olddefconfig < /dev/null; \ + fi + +kernel: + $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) < /dev/null + +kernel-standalone: initramfs + $(Q)$(MAKE) -C $(srctree) ARCH=$(ARCH) CC=$(CC) CROSS_COMPILE=$(CROSS_COMPILE) $(IMAGE_NAME) CONFIG_INITRAMFS_SOURCE=$(CURDIR)/initramfs < /dev/null + +# run the tests after building the kernel +run: kernel initramfs.cpio + $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(IMAGE)" -initrd initramfs.cpio -serial file:/dev/stdout $(QEMU_ARGS) > "$(CURDIR)/run.out" + $(Q)$(REPORT) $(CURDIR)/run.out + +# re-run the tests from an existing kernel +rerun: + $(Q)qemu-system-$(QEMU_ARCH) -display none -no-reboot -kernel "$(IMAGE)" -initrd initramfs.cpio -serial file:/dev/stdout $(QEMU_ARGS) > "$(CURDIR)/run.out" + $(Q)$(REPORT) $(CURDIR)/run.out + +# report with existing test log +report: + $(Q)$(REPORT) $(CURDIR)/run.out + +clean: + $(call QUIET_CLEAN, sysroot) + $(Q)rm -rf sysroot + $(call QUIET_CLEAN, nolibc-test) + $(Q)rm -f nolibc-test + $(call QUIET_CLEAN, libc-test) + $(Q)rm -f libc-test + $(call QUIET_CLEAN, initramfs.cpio) + $(Q)rm -rf initramfs.cpio + $(call QUIET_CLEAN, initramfs) + $(Q)rm -rf initramfs + $(call QUIET_CLEAN, run.out) + $(Q)rm -rf run.out + +.PHONY: sysroot/$(ARCH)/include diff --git a/tools/testing/selftests/nolibc/nolibc-test.c b/tools/testing/selftests/nolibc/nolibc-test.c index dbe13000fb1a..a297ee0d6d07 100644 --- a/tools/testing/selftests/nolibc/nolibc-test.c +++ b/tools/testing/selftests/nolibc/nolibc-test.c @@ -877,7 +877,12 @@ int test_file_stream(void) return 0; } -int test_fork(void) +enum fork_type { + FORK_STANDARD, + FORK_VFORK, +}; + +int test_fork(enum fork_type type) { int status; pid_t pid; @@ -886,14 +891,23 @@ int test_fork(void) fflush(stdout); fflush(stderr); - pid = fork(); + switch (type) { + case FORK_STANDARD: + pid = fork(); + break; + case FORK_VFORK: + pid = vfork(); + break; + default: + return 1; + } switch (pid) { case -1: return 1; case 0: - exit(123); + _exit(123); default: pid = waitpid(pid, &status, 0); @@ -1330,7 +1344,7 @@ int run_syscall(int min, int max) CASE_TEST(dup3_m1); tmp = dup3(-1, 100, 0); EXPECT_SYSER(1, tmp, -1, EBADF); if (tmp != -1) close(tmp); break; CASE_TEST(execve_root); EXPECT_SYSER(1, execve("/", (char*[]){ [0] = "/", [1] = NULL }, NULL), -1, EACCES); break; CASE_TEST(file_stream); EXPECT_SYSZR(1, test_file_stream()); break; - CASE_TEST(fork); EXPECT_SYSZR(1, test_fork()); break; + CASE_TEST(fork); EXPECT_SYSZR(1, test_fork(FORK_STANDARD)); break; CASE_TEST(getdents64_root); EXPECT_SYSNE(1, test_getdents64("/"), -1); break; CASE_TEST(getdents64_null); EXPECT_SYSER(1, test_getdents64("/dev/null"), -1, ENOTDIR); break; CASE_TEST(directories); EXPECT_SYSZR(proc, test_dirent()); break; @@ -1349,6 +1363,7 @@ int run_syscall(int min, int max) CASE_TEST(mmap_bad); EXPECT_PTRER(1, mmap(NULL, 0, PROT_READ, MAP_PRIVATE, 0, 0), MAP_FAILED, EINVAL); break; CASE_TEST(munmap_bad); EXPECT_SYSER(1, munmap(NULL, 0), -1, EINVAL); break; CASE_TEST(mmap_munmap_good); EXPECT_SYSZR(1, test_mmap_munmap()); break; + CASE_TEST(nanosleep); ts.tv_nsec = -1; EXPECT_SYSER(1, nanosleep(&ts, NULL), -1, EINVAL); break; CASE_TEST(open_tty); EXPECT_SYSNE(1, tmp = open("/dev/null", O_RDONLY), -1); if (tmp != -1) close(tmp); break; CASE_TEST(open_blah); EXPECT_SYSER(1, tmp = open("/proc/self/blah", O_RDONLY), -1, ENOENT); if (tmp != -1) close(tmp); break; CASE_TEST(openat_dir); EXPECT_SYSZR(1, test_openat()); break; @@ -1374,6 +1389,7 @@ int run_syscall(int min, int max) CASE_TEST(uname_fault); EXPECT_SYSER(1, uname(NULL), -1, EFAULT); break; CASE_TEST(unlink_root); EXPECT_SYSER(1, unlink("/"), -1, EISDIR); break; CASE_TEST(unlink_blah); EXPECT_SYSER(1, unlink("/proc/self/blah"), -1, ENOENT); break; + CASE_TEST(vfork); EXPECT_SYSZR(1, test_fork(FORK_VFORK)); break; CASE_TEST(wait_child); EXPECT_SYSER(1, wait(&tmp), -1, ECHILD); break; CASE_TEST(waitpid_min); EXPECT_SYSER(1, waitpid(INT_MIN, &tmp, WNOHANG), -1, ESRCH); break; CASE_TEST(waitpid_child); EXPECT_SYSER(1, waitpid(getpid(), &tmp, WNOHANG), -1, ECHILD); break; @@ -1413,7 +1429,7 @@ int run_stdlib(int min, int max) * Add some more chars after the \0, to test functions that overwrite the buffer set * the \0 at the exact right position. */ - char buf[10] = "test123456"; + char buf[11] = "test123456"; buf[4] = '\0'; @@ -1646,6 +1662,28 @@ int test_strerror(void) return 0; } +static int test_printf_error(void) +{ + int fd, ret, saved_errno; + + fd = open("/dev/full", O_RDWR); + if (fd == -1) + return 1; + + errno = 0; + ret = dprintf(fd, "foo"); + saved_errno = errno; + close(fd); + + if (ret != -1) + return 2; + + if (saved_errno != ENOSPC) + return 3; + + return 0; +} + static int run_printf(int min, int max) { int test; @@ -1675,6 +1713,7 @@ static int run_printf(int min, int max) CASE_TEST(width_trunc); EXPECT_VFPRINTF(25, " ", "%25d", 1); break; CASE_TEST(scanf); EXPECT_ZR(1, test_scanf()); break; CASE_TEST(strerror); EXPECT_ZR(1, test_strerror()); break; + CASE_TEST(printf_error); EXPECT_ZR(1, test_printf_error()); break; case __LINE__: return ret; /* must be last */ /* note: do not set any defaults so as to permit holes above */ @@ -1762,12 +1801,14 @@ int prepare(void) if (stat("/dev/.", &stat_buf) == 0 || mkdir("/dev", 0755) == 0) { if (stat("/dev/console", &stat_buf) != 0 || stat("/dev/null", &stat_buf) != 0 || - stat("/dev/zero", &stat_buf) != 0) { + stat("/dev/zero", &stat_buf) != 0 || + stat("/dev/full", &stat_buf) != 0) { /* try devtmpfs first, otherwise fall back to manual creation */ if (mount("/dev", "/dev", "devtmpfs", 0, 0) != 0) { mknod("/dev/console", 0600 | S_IFCHR, makedev(5, 1)); mknod("/dev/null", 0666 | S_IFCHR, makedev(1, 3)); mknod("/dev/zero", 0666 | S_IFCHR, makedev(1, 5)); + mknod("/dev/full", 0666 | S_IFCHR, makedev(1, 7)); } } } diff --git a/tools/testing/selftests/nolibc/run-tests.sh b/tools/testing/selftests/nolibc/run-tests.sh index 8277599e6441..e8af1fb505cf 100755 --- a/tools/testing/selftests/nolibc/run-tests.sh +++ b/tools/testing/selftests/nolibc/run-tests.sh @@ -18,15 +18,16 @@ test_mode=system werror=1 llvm= all_archs=( - i386 x86_64 + i386 x86_64 x32 arm64 arm armthumb - mips32le mips32be + mips32le mips32be mipsn32le mipsn32be mips64le mips64be ppc ppc64 ppc64le riscv32 riscv64 s390x s390 loongarch sparc32 sparc64 m68k + sh4 ) archs="${all_archs[@]}" @@ -114,6 +115,7 @@ crosstool_arch() { mips*) echo mips;; s390*) echo s390;; sparc*) echo sparc64;; + x32*) echo x86_64;; *) echo "$1";; esac } @@ -169,7 +171,7 @@ test_arch() { if [ "$werror" -ne 0 ]; then CFLAGS_EXTRA="$CFLAGS_EXTRA -Werror" fi - MAKE=(make -j"${nproc}" XARCH="${arch}" CROSS_COMPILE="${cross_compile}" LLVM="${llvm}" O="${build_dir}") + MAKE=(make -f Makefile.nolibc -j"${nproc}" XARCH="${arch}" CROSS_COMPILE="${cross_compile}" LLVM="${llvm}" O="${build_dir}") case "$test_mode" in 'system') @@ -187,7 +189,11 @@ test_arch() { echo "Unsupported configuration" return fi - if [ "$arch" = "m68k" ] && [ "$llvm" = "1" ]; then + if [ "$arch" = "m68k" -o "$arch" = "sh4" ] && [ "$llvm" = "1" ]; then + echo "Unsupported configuration" + return + fi + if [ "$arch" = "x32" ] && [ "$test_mode" = "user" ]; then echo "Unsupported configuration" return fi |