summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-07-24Merge tag 'ipsec-next-2025-07-23' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next Steffen Klassert says: ==================== pull request (net-next): ipsec-next 2025-07-23 1) Optimize to hold device only for the asynchronous decryption, where it is really needed. From Jianbo Liu. 2) Align our inbund SA lookup to RFC 4301. Only SPI and protocol should be used for an inbound SA lookup. From Aakash Kumar S. 3) Skip redundant statistics update for xfrm crypto offload. From Jianbo Liu. Please pull or let me know if there are problems. * tag 'ipsec-next-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next: xfrm: Skip redundant statistics update for crypto offload xfrm: Duplicate SPI Handling xfrm: hold device only for the asynchronous decryption ==================== Link: https://patch.msgid.link/20250723080402.3439619-1-steffen.klassert@secunet.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-24spi: Add driver for the RZ/V2H(P) RSPI IPFabrizio Castro
The Renesas RZ/V2H(P) RSPI IP supports 4-wire and 3-wire serial communications in both host role and target role. It can use a DMA, but the I/O can also be driven by the processor. RX-only, TX-only, and RX-TX operations are available in DMA mode, while in processor I/O mode it only RX-TX operations are supported. Add a driver to support 4-wire serial communications as host role in processor I/O mode. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Link: https://patch.msgid.link/20250704162036.468765-3-fabrizio.castro.jz@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-24spi: dt-bindings: Document the RZ/V2H(P) RSPIFabrizio Castro
Add dt-bindings for the RSPI IP found inside the Renesas RZ/V2H(P) SoC. Signed-off-by: Fabrizio Castro <fabrizio.castro.jz@renesas.com> Reviewed-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://patch.msgid.link/20250704162036.468765-2-fabrizio.castro.jz@renesas.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-24Merge tag 'asoc-v6.17' of ↵Takashi Iwai
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-next ASoC: Updates for v6.17 There's a few new drivers here and quite a lot of cleanup work from Morimoto-san but generally this has been quite a quiet release, resulting in a fairly small diffstat. Highlights include: - Refactoring of the Kconfig menus to be hopefully more consistant and easier to navigate. - Refactoring of the DAPM code, mainly hiding functionality that doesn't need to be exposed to drivers. - Removal of the unused upstream weak paths DAPM functionality. - Further work on the generic handling for SoundWire SDCA devices. - Cleanups of our usage of the PM autosuspend functions, this pulls in some PM core changes on a shared tag. - Support for AMD ACP7.2 and SoundWire on ACP 7.1, Fairphone 4 & 5, various Intel systems, Qualcomm QCS8275, Richtek RTQ9124 and TI TAS5753.
2025-07-24Merge branch 'for-linus' into for-nextTakashi Iwai
Merge the last-piece from 6.16 devel branch to sync the code base. Signed-off-by: Takashi Iwai <tiwai@suse.de>
2025-07-24MAINTAINERS: Add an entry for Amlogic spi driverXianwei Zhao
Add Amlogic spi entry to MAINTAINERS to clarify the maintainers. Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Link: https://patch.msgid.link/20250718-spisg-v5-3-b8f0f1eb93a2@amlogic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-24spi: Add Amlogic SPISG driverSunny Luo
Introduced support for the new SPI IP (SPISG) driver. The SPISG is a communication-oriented SPI controller from Amlogic,supporting three operation modes: PIO, block DMA, and scatter-gather DMA. Due to there is no FIFO, PIO mode can only transfer one word at a time, which is extremely slow. Therefore, this mode was not implemented. Signed-off-by: Sunny Luo <sunny.luo@amlogic.com> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Link: https://patch.msgid.link/20250718-spisg-v5-2-b8f0f1eb93a2@amlogic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-24spi: dt-bindings: Add binding document of Amlogic SPISG controllerSunny Luo
The SPISG is a new communication oriented SPI controller of Amlogic, which supports PIO, block DMA and scatter-gather DMA three operation modes. Signed-off-by: Sunny Luo <sunny.luo@amlogic.com> Acked-by: Conor Dooley <conor.dooley@microchip.com> Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com> Link: https://patch.msgid.link/20250718-spisg-v5-1-b8f0f1eb93a2@amlogic.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-24spi: spi-sg2044-nor: Add SPI-NOR controller for SG2042Zixian Zeng
Add support for SOPHGO SG2042 SPI-NOR flash controller. Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com> Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang Link: https://patch.msgid.link/20250720-sfg-spifmc-v4-3-033188ad801e@gmail.com Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-24spi: spi-sg2044-nor: Add configurable chip_infoZixian Zeng
SG2044 and SG2042 have similar SPI-NOR flash controller design, but have incompatibility which causes existing driver not working on SG2042: 1. SPI-NOR flash controller on SG2042 have no OPT register. 2. FIFO trigger level on SG2042 should be strictly less than 8. So introduce a new configurable chip_info structure to hold the different configuration. Link: https://github.com/sophgo/sophgo-doc/blob/main/SG2042/TRM/source/SPI-flash.rst Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com> Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang Link: https://patch.msgid.link/20250720-sfg-spifmc-v4-2-033188ad801e@gmail.com Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-24spi: dt-bindings: spi-sg2044-nor: Change SOPHGO SG2042Zixian Zeng
With further testing, directly using the spi-sg2044-nor driver on SG2042 does not work. SG2042 is found to lack full compatibility with SG2044. SG2044 has OPT register and it's necessary to write but SG2042 does not. Due to other possible hardware detail differences, it is better to bind SG2042 independently. Fixes: 8450f1e0d3d0 ("spi: dt-bindings: spi-sg2044-nor: Add SOPHGO SG2042") Signed-off-by: Zixian Zeng <sycamoremoon376@gmail.com> Acked-by: Rob Herring (Arm) <robh@kernel.org> Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang Link: https://patch.msgid.link/20250720-sfg-spifmc-v4-1-033188ad801e@gmail.com Reviewed-by: Chen Wang <unicorn_wang@outlook.com> & Tested-by: Chen Wang Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-24erofs: support to readahead dirent blocks in erofs_readdir()Chao Yu
This patch supports to readahead more blocks in erofs_readdir(), it can enhance readdir performance in large direcotry. readdir test in a large directory which contains 12000 sub-files. files_per_second Before: 926385.54 After: 2380435.562 Meanwhile, let's introduces a new sysfs entry to control readahead bytes to provide more flexible policy for readahead of readdir(). - location: /sys/fs/erofs/<disk>/dir_ra_bytes - default value: 16384 - disable readahead: set the value to 0 Signed-off-by: Chao Yu <chao@kernel.org> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250721021352.2495371-1-chao@kernel.org [ Gao Xiang: minor styling adjustment. ] Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2025-07-24erofs: implement metadata compressionBo Liu (OpenAnolis)
Thanks to the meta buffer infrastructure, metadata-compressed inodes are just read from the metabox inode instead of the blockdevice (or backing file) inode. The same is true for shared extended attributes. When metadata compression is enabled, inode numbers are divided from on-disk NIDs because of non-LTS 32-bit application compatibility. Co-developed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Bo Liu (OpenAnolis) <liubo03@inspur.com> Acked-by: Chao Yu <chao@kernel.org> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250722003229.2121752-1-hsiangkao@linux.alibaba.com
2025-07-24erofs: add on-disk definition for metadata compressionGao Xiang
Filesystem metadata has a high degree of redundancy, so it should compress well in the general case. Although metadata compression can increase overall I/O latency, many users care more about minimized image sizes than extreme runtime performance. Let's implement metadata compression in response to user requests [1]. Actually, it's quite simple to implement metadata compression: since EROFS already supports per-inode compression, we can simply treat a special inode (called `the metabox inode`) as a container for compressed inode metadata. Since EROFS supports multiple algorithms, users can even specify LZ4 for metadata and LZMA for data. To better support incremental builds, the MSB of NIDs indicates where the inode metadata is located: if bit 63 is set, the inode itself should be read from `the metabox inode`. Optionally, shared xattrs can also be kept in `the metabox inode` if COMPAT_SHARED_EA_IN_METABOX is set. [1] https://issues.redhat.com/browse/RHEL-75783 Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Acked-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20250717070804.1446345-2-hsiangkao@linux.alibaba.com
2025-07-24erofs: fix build error with CONFIG_EROFS_FS_ZIP_ACCEL=yBo Liu (OpenAnolis)
fix build err: ld.lld: error: undefined symbol: crypto_req_done referenced by decompressor_crypto.c fs/erofs/decompressor_crypto.o:(z_erofs_crypto_decompress) in archive vmlinux.a referenced by decompressor_crypto.c fs/erofs/decompressor_crypto.o:(z_erofs_crypto_decompress) in archive vmlinux.a ld.lld: error: undefined symbol: crypto_acomp_decompress referenced by decompressor_crypto.c fs/erofs/decompressor_crypto.o:(z_erofs_crypto_decompress) in archive vmlinux.a ld.lld: error: undefined symbol: crypto_alloc_acomp referenced by decompressor_crypto.c fs/erofs/decompressor_crypto.o:(z_erofs_crypto_enable_engine) in archive vmlinux.a Reported-by: kernel test robot <lkp@intel.com> Closes: https://lore.kernel.org/oe-kbuild-all/202507161032.QholMPtn-lkp@intel.com/ Fixes: b4a29efc5146 ("erofs: support DEFLATE decompression by using Intel QAT") Signed-off-by: Bo Liu (OpenAnolis) <liubo03@inspur.com> Link: https://lore.kernel.org/r/20250718033039.3609-1-liubo03@inspur.com Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2025-07-24erofs: remove ENOATTR definitionGao Xiang
ENOATTR is not defined in Linux; use ENODATA instead. Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250717042317.1218597-1-hsiangkao@linux.alibaba.com
2025-07-24erofs: refine erofs_iomap_begin()Gao Xiang
- Avoid calling erofs_map_dev() for unmapped extents; - Assign `iomap->addr` for inline extents too (since they have physical location). Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250716092254.3826715-1-hsiangkao@linux.alibaba.com
2025-07-24erofs: unify meta buffers in z_erofs_fill_inode()Gao Xiang
There is no need to keep additional local metabufs since we already have one in `struct erofs_map_blocks`. This was actually a leftover when applying meta buffers to zmap operations, see commit 09c543798c3c ("erofs: use meta buffers for zmap operations"). Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250716064152.3537457-1-hsiangkao@linux.alibaba.com
2025-07-24erofs: remove need_kmap in erofs_read_metabuf()Gao Xiang
- need_kmap is always true except for a ztailpacking case; thus, just open-code that one; - The upcoming metadata compression will add a new boolean, so simplify this first. Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Reviewed-by: Chao Yu <chao@kernel.org> Link: https://lore.kernel.org/r/20250714090907.4095645-1-hsiangkao@linux.alibaba.com
2025-07-24erofs: do sanity check on m->type in z_erofs_load_compact_lcluster()Chao Yu
All below functions will do sanity check on m->type, let's move sanity check to z_erofs_load_compact_lcluster() for cleanup. - z_erofs_map_blocks_fo - z_erofs_get_extent_compressedlen - z_erofs_get_extent_decompressedlen - z_erofs_extent_lookback Reviewed-by: Hongbo Li <lihongbo22@huawei.com> Signed-off-by: Chao Yu <chao@kernel.org> Reviewed-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250708110928.3110375-1-chao@kernel.org Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
2025-07-24erofs: get rid of {get,put}_page() for ztailpacking dataGao Xiang
The compressed data for the ztailpacking feature is fetched from the metadata inode (e.g., bd_inode), which is folio-based. Therefore, the folio interface should be used instead. Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com> Link: https://lore.kernel.org/r/20250626085459.339830-1-hsiangkao@linux.alibaba.com
2025-07-24regulator: Kconfig: Fix spelling mistake "regualtor" -> "regulator"Colin Ian King
There is a spelling mistake in the REGULATOR_RT4803 config. Fix it. Signed-off-by: Colin Ian King <colin.i.king@gmail.com> Link: https://patch.msgid.link/20250724113113.143009-1-colin.i.king@gmail.com Signed-off-by: Mark Brown <broonie@kernel.org>
2025-07-24Merge tag 'ib-mfd-gpio-power-soc-v6.17' of ↵Bartosz Golaszewski
git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd into gpio/for-next Immutable branch between MFD, GPIO, Power and SoC due for the v6.17 merge window
2025-07-24Merge tag 'usb-serial-6.17-rc1-2' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB serial device id for 6.17-rc1 Here's a new modem device id. This has been in linux-next with no reported issues. * tag 'usb-serial-6.17-rc1-2' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: option: add Foxconn T99W709
2025-07-24Merge tag 'usb-serial-6.17-rc1' of ↵Greg Kroah-Hartman
ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial into usb-next Johan writes: USB serial updates for 6.17-rc1 Here are the USB serial updates for 6.17-rc1, including - switch to new gpiolib interface that can return errors All have been in linux-next with no reported issues. * tag 'usb-serial-6.17-rc1' of ssh://gitolite.kernel.org/pub/scm/linux/kernel/git/johan/usb-serial: USB: serial: cp210x: use new GPIO line value setter callbacks USB: serial: ftdi_sio: use new GPIO line value setter callbacks
2025-07-24Merge tag 'ipsec-2025-07-23' of ↵Paolo Abeni
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec Steffen Klassert says: ==================== pull request (net): ipsec 2025-07-23 1) Premption fixes for xfrm_state_find. From Sabrina Dubroca. 2) Initialize offload path also for SW IPsec GRO. This fixes a performance regression on SW IPsec offload. From Leon Romanovsky. 3) Fix IPsec UDP GRO for IKE packets. From Tobias Brunner, 4) Fix transport header setting for IPcomp after decompressing. From Fernando Fernandez Mancera. 5) Fix use-after-free when xfrmi_changelink tries to change collect_md for a xfrm interface. From Eyal Birger . 6) Delete the special IPcomp x->tunnel state along with the state x to avoid refcount problems. From Sabrina Dubroca. Please pull or let me know if there are problems. * tag 'ipsec-2025-07-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec: Revert "xfrm: destroy xfrm_state synchronously on net exit path" xfrm: delete x->tunnel as we delete x xfrm: interface: fix use-after-free after changing collect_md xfrm interface xfrm: ipcomp: adjust transport header after decompressing xfrm: Set transport header to fix UDP GRO handling xfrm: always initialize offload path xfrm: state: use a consistent pcpu_id in xfrm_state_find xfrm: state: initialize state_ptrs earlier in xfrm_state_find ==================== Link: https://patch.msgid.link/20250723075417.3432644-1-steffen.klassert@secunet.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2025-07-24mfd: mt6397: Do not use generic name for keypad sub-devicesDmitry Torokhov
Do not use "mtk-pmic-keys" when creating sub-device for the keypad to make sure the keypad driver will only bind to the sub-device if it has support for the variant/has matching compatible. Cc: stable@vger.kernel.org Fixes: 6e31bb8d3a63 ("mfd: mt6397: Add initial support for MT6328") Fixes: de58cee8c6b8 ("mfd: mt6397-core: Add MT6357 PMIC support") Fixes: 4a901e305011 ("mfd: mt6397-core: Add resources for PMIC keys for MT6359") Reported-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com> Tested-by: Louis-Alexis Eyraud <louisalexis.eyraud@collabora.com> # on Link: https://lore.kernel.org/r/r4k3pgd3ew3ypne7ernxuzwgniiyvzosbce4cfajbcu7equblt@yato35tjb3lw Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: axp20x: Set explicit ID for regulator cell if no IRQ line is presentChen-Yu Tsai
Originally an explicit ID for the AXP313/AXP323 regulator was set to avoid a conflict with the primary AXP717 PMIC on Allwinner A523 family boards. This didn't entirely work since on some or all of these boards, the interrupt line on this secondary PMIC was left unconnected, and thus the driver would fall back to the generic "no interrupt; only regulators" case, which didn't have the explicit ID set, thus undoing the intended fix. Also set an explicit ID for the regulator cell in the no IRQ generic fall back case. This fixes the conflict for the AXP717 + AXP313/AXP323 case. For the actual single PMIC with no IRQ connected case, the ID does not affect functionality, only the device naming of the regulator cell, and by extension the name and path under sysfs. Fixes: 249abf9b1e25 ("mfd: axp20x: Set explicit ID for AXP313 regulator") Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20250701163652.252010-1-wens@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: mt6370: Fix the interrupt naming typoChiYuan Huang
Modify the lowercase character to uppercase. Signed-off-by: ChiYuan Huang <cy_huang@richtek.com> Link: https://lore.kernel.org/r/a6ab943f4660e39b8112ff58fa97af0507cd89e9.1752026324.git.cy_huang@richtek.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: rk8xx-core: Allow to customize RK806 reset modeQuentin Schulz
The RK806 PMIC has a bitfield for configuring the restart/reset behavior (which I assume Rockchip calls "function") whenever the PMIC is reset either programmatically (c.f. DEV_RST in the datasheet) or via PWRCTRL or RESETB pins. For RK806, the following values are possible for RST_FUN: 0b00 means "Restart PMU" 0b01 means "Reset all the power off reset registers, forcing the state to switch to ACTIVE mode" 0b10 means "Reset all the power off reset registers, forcing the state to switch to ACTIVE mode, and simultaneously pull down the RESETB PIN for 5mS before releasing" 0b11 means the same as for 0b10 just above. This adds the appropriate logic in the driver to parse the new rockchip,reset-mode DT property to pass this information. It just happens that the values in the binding match the values to write in the bitfield so no mapping is necessary. If it is missing, the register is left untouched and relies either on the silicon default or on whatever was set earlier in the boot stages (e.g. the bootloader). Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Link: https://lore.kernel.org/r/20250627-rk8xx-rst-fun-v4-2-ce05d041b45f@cherry.de Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24dt-bindings: mfd: rk806: Allow to customize PMIC reset modeQuentin Schulz
The RK806 PMIC allows to configure its reset/restart behavior whenever the PMIC is reset either programmatically or via some external pins (e.g. PWRCTRL or RESETB). The following modes exist: - 0; restart PMU, - 1; reset all power off reset registers and force state to switch to ACTIVE mode, - 2; same as mode 1 and also pull RESETB pin down for 5ms, For example, some hardware may require a full restart (mode 0) in order to function properly as regulators are shortly interrupted in this mode. This is the case for RK3588 Jaguar and RK3588 Tiger which have a companion microcontroller running on an independent power supply and monitoring the PMIC power rail to know the state of the main system. When it detects a restart, it resets its own IPs exposed to the main system as if to simulate its own reset. Failing to perform this fake reset of the microcontroller may break things (e.g. watchdog not automatically disabled, buzzer still running until manually disabled, leftover configuration from previous main system state, etc...). Some other systems may be depending on the power rails to not be interrupted even for a small amount of time[1]. This allows to specify how the PMIC should perform on the hardware level and may differ between hardware designs, so a DT property seems warranted. I unfortunately do not see how this could be made generic enough to make it a non-vendor property. [1] https://lore.kernel.org/linux-rockchip/2577051.irdbgypaU6@workhorse/ Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250627-rk8xx-rst-fun-v4-1-ce05d041b45f@cherry.de Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: syscon: atmel-smc: Don't use "proxy" headersAndy Shevchenko
Update header inclusions to follow IWYU (Include What You Use) principle. Note that kernel.h is discouraged to be included as it's written at the top of that file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250627164414.1043434-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: madera: Don't use "proxy" headersAndy Shevchenko
Update header inclusions to follow IWYU (Include What You Use) principle. Note that kernel.h is discouraged to be included as it's written at the top of that file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250626154544.324724-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: wm8350-core: Don't use "proxy" headersAndy Shevchenko
Update header inclusions to follow IWYU (Include What You Use) principle. Note that kernel.h is discouraged to be included as it's written at the top of that file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250626155951.325683-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24dt-bindings: mfd: samsung,s2mps11: Add comment about interrupts propertiesAndré Draszik
Document why the binding uses oneOf when specifying just one of the interrupt properties is supposed to be enough. dtschema's fixups.py has special treatment of the interrupts and interrupts-extended properties, but that appears to work at the top level only. Elsewhere, an explicit oneOf is required. Signed-off-by: André Draszik <andre.draszik@linaro.org> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250627-s2mpg10-binding-comment-v1-1-f37e5187f0fd@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: davinci_voicecodec: Don't use "proxy" headersAndy Shevchenko
Update header inclusions to follow IWYU (Include What You Use) principle. Note that kernel.h is discouraged to be included as it's written at the top of that file. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20250626154354.324439-1-andriy.shevchenko@linux.intel.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: pcf50633: Remove the header file core.hDr. David Alan Gilbert
The patches to remove all of the pieces of the pcf50633 have gone in and we're left with the header. Remove it. The pcf50633 was used as part of the OpenMoko devices but the support for its main chip was recently removed in: commit 61b7f8920b17 ("ARM: s3c: remove all s3c24xx support") See https://lore.kernel.org/all/Z8z236h4B5A6Ki3D@gallifrey/ Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org> Link: https://lore.kernel.org/r/20250701145625.204048-1-linux@treblig.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: tps65219: Remove another unused field from 'struct tps65219'Christophe JAILLET
The 'chip_id' field from 'struct tps65219' is unused. Remove it. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/f20443e6e13b0b101648a41010a19ee56589fa0b.1750530460.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: tps65219: Remove an unused field from 'struct tps65219'Christophe JAILLET
Since commit 3df4c6367520 ("mfd: tps65219: Add support for soft shutdown via sys-off API"), the 'nb' field from 'struct tps65219' is unused. Remove it. Also remove the now useless #include <linux/notifier.h> for the same reason. Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/8a264c3a92b8e62c1dadd374f2685030e042eb08.1750530460.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: tps65219: Constify struct regmap_irq_sub_irq_map and tps65219_chip_dataChristophe JAILLET
'struct regmap_irq_sub_irq_map' and 'struct tps65219_chip_data' are not modified in this driver. Constifying these structures moves some data to a read-only section, so increases overall security. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 27804 10016 256 38076 94bc drivers/mfd/tps65219.o After: ===== text data bss dec hex filename 27893 9792 256 37941 9435 drivers/mfd/tps65219.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Link: https://lore.kernel.org/r/117946696551de41b706ea9b973a7ccaacea5178.1750530460.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: rohm-bd71828: Constify some structuresChristophe JAILLET
Several structures are not modified in this driver. Constifying them moves some data to a read-only section, so increases overall security, especially when the structure holds some function pointers. This is the case for 'gpio_keys_platform_data' and 'mfd_cell'. On a x86_64, with allmodconfig: Before: ====== text data bss dec hex filename 18321 13952 192 32465 7ed1 drivers/mfd/rohm-bd71828.o After: ===== text data bss dec hex filename 22897 9376 192 32465 7ed1 drivers/mfd/rohm-bd71828.o Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Link: https://lore.kernel.org/r/037e28e587ae899da9acdb45c606d75ec61f858b.1750501700.git.christophe.jaillet@wanadoo.fr Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24dt-bindings: mfd: fsl,imx8qxp-csr: Remove binding documentationLiu Ying
commit b0a5cde57cf1 ("dt-bindings: mfd: Explain lack of child dependency in simple-mfd") pointed out that it's a mistake for a child device of a simple MFD device to depend on the simple MFD device's clock resources. fsl,imx8qxp-csr.yaml happens to make that mistake. To fix that, remove fsl,imx8qxp-csr.yaml and use "simple-pm-bus" and "syscon" as the CSR node's compatible strings in the examples of fsl,imx8qxp-pixel-link-msi-bus.yaml to replace the wrong compatible strings which include "simple-mfd" and "fsl,imx8qxp-mipi-lvds-csr". Since fsl,imx8qxp-pixel-link-msi-bus.yaml as the last user of the CSR compatible strings no longer uses them, it's safe to remove the fsl,imx8qxp-csr.yaml binding documentation. Fixes: 9b2c55b5403f ("dt-bindings: mfd: Add i.MX8qm/qxp Control and Status Registers module binding") Fixes: c08645ea215c ("dt-bindings: bus: Add Freescale i.MX8qxp pixel link MSI bus binding") Signed-off-by: Liu Ying <victor.liu@nxp.com> Reviewed-by: Frank Li <Frank.Li@nxp.com> Link: https://lore.kernel.org/r/20250620022537.3072877-1-victor.liu@nxp.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: axp20x: Set explicit ID for AXP313 regulatorChen-Yu Tsai
On newer boards featuring the A523 SoC, the AXP323 (related to the AXP313) is paired with the AXP717 and serves as a secondary PMIC providing additional regulator outputs. However the MFD cells are all registered with PLATFORM_DEVID_NONE, which causes the regulator cells to conflict with each other. Commit e37ec3218870 ("mfd: axp20x: Allow multiple regulators") attempted to fix this by switching to PLATFORM_DEVID_AUTO so that the device names would all be different, however that broke IIO channel mapping, which is also tied to the device names. As a result the change was later reverted. Instead, here we attempt to make sure the AXP313/AXP323 regulator cell does not conflict by explicitly giving it an ID number. This was previously done for the AXP809+AXP806 pair used with the A80 SoC. Signed-off-by: Chen-Yu Tsai <wens@csie.org> Link: https://lore.kernel.org/r/20250619173207.3367126-1-wens@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: Use dev_fwnode() instead of of_fwnode_handle()Jiri Slaby (SUSE)
irq_domain_create_simple() takes fwnode as the first argument. It can be extracted from the struct device using dev_fwnode() helper instead of using of_node with of_fwnode_handle(). So use the dev_fwnode() helper. Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250611104348.192092-13-jirislaby@kernel.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: stm32-timers: Fix build warnings about export.hAntonio Borneo
After commit a934a57a42f6 ("scripts/misc-check: check missing #include <linux/export.h> when W=1") and commit 7d95680d64ac ("scripts/misc-check: check unnecessary #include <linux/export.h> when W=1") we get the build warning with W=1: drivers/mfd/stm32-timers.c: warning: EXPORT_SYMBOL() is used, but #include <linux/export.h> is missing Fix it. Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com> Acked-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com> Link: https://lore.kernel.org/r/20250610124855.269158-6-antonio.borneo@foss.st.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: twl6030-irq: Remove unused twl6030_mmc_card_detect*Dr. David Alan Gilbert
twl6030_mmc_card_detect() and twl6030_mmc_card_detect_config() have been unused since 2013's commit b2ff4790612b ("ARM: OMAP2+: Remove legacy omap4_twl6030_hsmmc_init") Remove them. Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org> Link: https://lore.kernel.org/r/20250607202232.265344-1-linux@treblig.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24dt-bindings: mfd: Convert lpc1850-creg-clk, pc1850-dmamux and ↵Frank Li
phy-lpc18xx-usb-otg to YAML format Combine the following separate plain text based bindings to YAML: lpc1850-creg-clk.txt pc1850-dmamux.txt phy-lpc18xx-usb-otg.txt Additional changes: - remove label in example. - remove dmamux consumer in example. - remove clock consumer in example. Signed-off-by: Frank Li <Frank.Li@nxp.com> Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250602143612.943516-1-Frank.Li@nxp.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24dt-bindings: mfd: convert mxs-lradc bindings to json-schemaDario Binacchi
Convert the Freescale MXS Low-Resoulution ADC (LRADC) device tree binding documentation to json-schema. The clocks and #io-channel-cells properties have also been added; They are present in the respective SoC DTSI files but were missing from the old mxs-lradc.txt file. Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> Reviewed-by: Conor Dooley <conor.dooley@microchip.com> Link: https://lore.kernel.org/r/20250530160748.2476088-2-dario.binacchi@amarulasolutions.com Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: Constify reg_sequence and regmap_irqKrzysztof Kozlowski
Static 'struct reg_sequence' array, 'struct regmap_irq_sub_irq_map' and 'struct regmap_irq_chip ' are not modified so can be changed to const for more safety. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Matti Vaittinen <mazziesaccount@gmail.com> Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com> Link: https://lore.kernel.org/r/20250528194416.567127-2-krzysztof.kozlowski@linaro.org Signed-off-by: Lee Jones <lee@kernel.org>
2025-07-24mfd: cros_ec: Separate charge-control probing from USB-PDThomas Weißschuh
The charge-control subsystem in the ChromeOS EC is not strictly tied to its USB-PD subsystem. Since commit 7613bc0d116a ("mfd: cros_ec: Don't load charger with UCSI") the presence of EC_FEATURE_UCSI_PPM would inhibit the probing of the charge-control driver. Furthermore recent versions of the EC firmware in Framework laptops hard-disable EC_FEATURE_USB_PD to avoid probing cros-usbpd-charger, which then also breaks cros-charge-control. Instead use the dedicated EC_FEATURE_CHARGER. Cc: stable@vger.kernel.org Link: https://github.com/FrameworkComputer/EmbeddedController/commit/1d7bcf1d50137c8c01969eb65880bc83e424597e Fixes: 555b5fcdb844 ("mfd: cros_ec: Register charge control subdevice") Signed-off-by: Thomas Weißschuh <linux@weissschuh.net> Reviewed-by: Tzung-Bi Shih <tzungbi@kernel.org> Tested-by: Tom Vincent <linux@tlvince.com> Link: https://lore.kernel.org/r/20250521-cros-ec-mfd-chctl-probe-v1-1-6ebfe3a6efa7@weissschuh.net Signed-off-by: Lee Jones <lee@kernel.org>
generated by cgit (git 2.34.1) at 2025-09-14 13:43:42 +0000