| Age | Commit message (Collapse) | Author |
|---|
|
Handle TDVMCALL for GetQuote to generate a TD-Quote.
GetQuote is a doorbell-like interface used by TDX guests to request VMM
to generate a TD-Quote signed by a service hosting TD-Quoting Enclave
operating on the host. A TDX guest passes a TD Report (TDREPORT_STRUCT) in
a shared-memory area as parameter. Host VMM can access it and queue the
operation for a service hosting TD-Quoting enclave. When completed, the
Quote is returned via the same shared-memory area.
KVM only checks the GPA from the TDX guest has the shared-bit set and drops
the shared-bit before exiting to userspace to avoid bleeding the shared-bit
into KVM's exit ABI. KVM forwards the request to userspace VMM (e.g. QEMU)
and userspace VMM queues the operation asynchronously. KVM sets the return
code according to the 'ret' field set by userspace to notify the TDX guest
whether the request has been queued successfully or not. When the request
has been queued successfully, the TDX guest can poll the status field in
the shared-memory area to check whether the Quote generation is completed
or not. When completed, the generated Quote is returned via the same
buffer.
Add KVM_EXIT_TDX as a new exit reason to userspace. Userspace is
required to handle the KVM exit reason as the initial support for TDX,
by reentering KVM to ensure that the TDVMCALL is complete. While at it,
add a note that KVM_EXIT_HYPERCALL also requires reentry with KVM_RUN.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
Tested-by: Mikko Ylinen <mikko.ylinen@linux.intel.com>
Acked-by: Kai Huang <kai.huang@intel.com>
[Adjust userspace API. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Add the new TDVMCALL status code TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED and
return it for unimplemented TDVMCALL subfunctions.
Returning TDVMCALL_STATUS_INVALID_OPERAND when a subfunction is not
implemented is vague because TDX guests can't tell the error is due to
the subfunction is not supported or an invalid input of the subfunction.
New GHCI spec adds TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED to avoid the
ambiguity. Use it instead of TDVMCALL_STATUS_INVALID_OPERAND.
Before the change, for common guest implementations, when a TDX guest
receives TDVMCALL_STATUS_INVALID_OPERAND, it has two cases:
1. Some operand is invalid. It could change the operand to another value
retry.
2. The subfunction is not supported.
For case 1, an invalid operand usually means the guest implementation bug.
Since the TDX guest can't tell which case is, the best practice for
handling TDVMCALL_STATUS_INVALID_OPERAND is stopping calling such leaf,
treating the failure as fatal if the TDVMCALL is essential or ignoring
it if the TDVMCALL is optional.
With this change, TDVMCALL_STATUS_SUBFUNC_UNSUPPORTED could be sent to
old TDX guest that do not know about it, but it is expected that the
guest will make the same action as TDVMCALL_STATUS_INVALID_OPERAND.
Currently, no known TDX guest checks TDVMCALL_STATUS_INVALID_OPERAND
specifically; for example Linux just checks for success.
Signed-off-by: Binbin Wu <binbin.wu@linux.intel.com>
[Return it for untrapped KVM_HC_MAP_GPA_RANGE. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux
Pull gpio fixes from Bartosz Golaszewski:
- correct the ACPI GPIO access mode in gpio-loongson-64bit
- only obtain the interrupt for a single instance of the chip
controlled by gpio-mlxbf3
- fix an invalid value return from probe() in gpio-pca953x
- add missing MODULE_DEVICE_TABLE() to gpio-spacemit
- update the HiSilicon GPIO driver maintainer entry
* tag 'gpio-fixes-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio: mlxbf3: only get IRQ for device instance 0
gpio: pca953x: fix wrong error probe return value
gpio: spacemit: Add missing MODULE_DEVICE_TABLE
gpio: loongson-64bit: Correct Loongson-7A2000 ACPI GPIO access mode
MAINTAINERS: Update HiSilicon GPIO driver maintainer
|
|
into HEAD
KVM/riscv fixes for 6.16, take #1
- Fix the size parameter check in SBI SFENCE calls
- Don't treat SBI HFENCE calls as NOPs
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD
KVM/arm64 fixes for 6.16, take #3
- Fix another set of FP/SIMD/SVE bugs affecting NV, and plugging some
missing synchronisation
- A small fix for the irqbypass hook fixes, tightening the check and
ensuring that we only deal with MSI for both the old and the new
route entry
- Rework the way the shadow LRs are addressed in a nesting
configuration, plugging an embarrassing bug as well as simplifying
the whole process
- Add yet another fix for the dreaded arch_timer_edge_cases selftest
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Pull sound fixes from Takashi Iwai:
"A collection of small fixes. All changes are device-specific at this
time:
- Fixes for Cirrus codecs with SoundWire, including firmware name
updates
- Fix for i.MX8 SoC DSP
- Usual HD-audio, USB-audio, and ASoC AMD quirks
- Fixes for legendary SoundBlaster AWE32 ISA device (a real one, we
still got a bug report after 25 years)
- Minor build fixes"
* tag 'sound-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (24 commits)
ALSA: hda/realtek: Enable headset Mic on Positivo P15X
ASoC: Intel: sof-function-topology-lib: Print out the unsupported dmic count
ASoC: doc: cs35l56: Add CS35L63 to the list of supported devices
ASoC: SOF: imx8: add core shutdown operation for imx8/imx8x
ALSA: hda/realtek: Add quirk for Asus GA605K
ALSA: hda/realtek: enable headset mic on Latitude 5420 Rugged
ASoC: amd: yc: update quirk data for HP Victus
ASoC: apple: mca: Drop default ARCH_APPLE in Kconfig
ALSA: usb-audio: Rename ALSA kcontrol PCM and PCM1 for the KTMicro sound card
ASoC: amd: yc: Add quirk for MSI Bravo 17 D7VF internal mic
ASoC: doc: cs35l56: Update to add new SoundWire firmware filename suffix
ASoC: cs35l56: Use SoundWire address as alternate firmware suffix on L56 B0
ASoC: cs35l56: Use SoundWire address as firmware name suffix for new silicon
ASoC: sdw_utils: Fix potential NULL pointer deref in is_sdca_endpoint_present()
ALSA: sb: Force to disable DMAs once when DMA mode is changed
ALSA: sb: Don't allow changing the DMA mode during operations
ALSA: hda/realtek: Add quirk for Asus GU605C
ALSA: hda/realtek: Fix built-in mic on ASUS VivoBook X513EA
ALSA: hda/realtek - Add mute LED support for HP Victus 16-s1xxx and HP Victus 15-fa1xxx
ALSA: ctxfi: Replace deprecated strcpy() with strscpy()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 fixes from Will Deacon:
"There's nothing major (even the vmalloc one is just suppressing a
potential warning) but all worth having, nonetheless.
- Suppress KASAN false positive in stack unwinding code
- Drop redundant reset of the GCS state on exec()
- Don't try to descend into a !present PMD when creating a huge
vmap() entry at the PUD level
- Fix a small typo in the arm64 booting Documentation"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64/ptrace: Fix stack-out-of-bounds read in regs_get_kernel_stack_nth()
arm64/gcs: Don't call gcs_free() during flush_gcs()
arm64: Restrict pagetable teardown to avoid false warning
docs: arm64: Fix ICC_SRE_EL2 register typo in booting.rst
|
|
It is possible when an inode is split into segments for multi-threaded
compression, and the tail extent of a segment could also be small.
Fixes: 1d191b4ca51d ("erofs: implement encoded extent metadata")
Signed-off-by: Gao Xiang <hsiangkao@linux.alibaba.com>
Link: https://lore.kernel.org/r/20250620153108.1368029-1-hsiangkao@linux.alibaba.com
|
|
A previous fix corrected the retry condition for when to continue a
current bundle, but it missed that the current (not the total) transfer
count also applies to the buffer put. If not, then for incrementally
consumed buffer rings repeated completions on the same request may end
up over consuming.
Reported-by: Roy Tang (ErgoniaTrading) <royonia@ergonia.io>
Cc: stable@vger.kernel.org
Fixes: 3a08988123c8 ("io_uring/net: only retry recv bundle for a full transfer")
Link: https://github.com/axboe/liburing/issues/1423
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Ringneck
The Haikou Video Demo adapter has a proprietary connector for a camera
module which has an OV5675 camera sensor and a companion DW9714 focus
lens driver.
This adds support for the camera module on PX30 Ringneck module fitted
on a Haikou devkit with the Haikou Video Demo adapter.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-3-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
This will make it slightly easier for Device Trees (and Overlays) to
link the ISP controller to a video input such as a CSI camera while also
bringing it closer to what's been done already for the DSI controller.
Suggested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-2-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
dtc complains with the following message for DTSes which use the ISP:
arch/arm64/boot/dts/rockchip/px30.dtsi:1272.19-1276.6: Warning (graph_child_address): /isp@ff4a0000/ports/port@0: graph node has single child node 'endpoint@0', #address-cells/#size-cells are not necessary
Typically, it is expected from the device DTS(I) to update the SoC DTSI
nodes if they have more than one endpoint, so let's assume there's only
one endpoint in port@0 by default, instead of forcing board DTS(I)s to
/delete-property/ address-cells and size-cells to make dtc happy.
Because PX30 PP1516/EVB's endpoint@0 is the only endpoint and
considering its parent node now has no address-cells property, dtc
complains (same messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #address-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (avoid_default_addr_size): /isp@ff4a0000/ports/port@0/endpoint@0: Relying on default #size-cells value
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (avoid_unnecessary_addr_size): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (unique_unit_address_if_enabled): Failed prerequisite 'avoid_default_addr_size'
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#address-cells' is -1, must be 1
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-451.6: Warning (graph_endpoint): /isp@ff4a0000/ports/port@0/endpoint@0: graph node '#size-cells' is -1, must be 0
arch/arm64/boot/dts/rockchip/px30-pp1516-ltk050h3146w-a2.dtb: Warning (graph_child_address): Failed prerequisite 'graph_endpoint'
so we fix that by removing the reg property. dtc still complains (same
messages for PX30 EVB):
arch/arm64/boot/dts/rockchip/px30-pp1516.dtsi:447.29-450.6: Warning (unit_address_vs_reg): /isp@ff4a0000/ports/port@0/endpoint@0: node has a unit name, but no reg or ranges property
so we also remove the @0 suffix off the node name.
Fixes: 8df7b4537dfb ("arm64: dts: rockchip: add isp node for px30")
Fixes: 474a77395be2 ("arm64: dts: rockchip: hook up camera on px30-evb")
Fixes: 56198acdbf0d ("arm64: dts: rockchip: add px30-pp1516 base dtsi and board variants")
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250610-ringneck-haikou-video-demo-cam-v2-1-de1bf87e0732@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Positivo P15X is equipped with ALC269VC, and needs a fix to make
the headset mic to work.
Also must to limits the internal microphone boost.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://patch.msgid.link/20250619191215.17203-1-edson.drosdeck@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound into for-linus
ASoC: Fixes for v6.16
A relatively large collection of fixes and updates that came in since
the merge window. Of note are a couple of Cirrus ones which change the
firmware naming for some newly added devices, and a fix from Laurentiu
for issues booting firmwares on the DSPs on i.MX8 SoCs.
|
|
Pull block fixes from Jens Axboe:
- Two fixes for aoe which fixes issues dating back to when this driver
was converted to blk-mq
- Fix for ublk, checking for valid queue depth and count values before
setting up a device
* tag 'block-6.16-20250619' of git://git.kernel.dk/linux:
ublk: santizize the arguments from userspace when adding a device
aoe: defer rexmit timer downdev work to workqueue
aoe: clean device rq_list in aoedev_downdev()
|
|
Pull io_uring fixes from Jens Axboe:
- Two fixes for error injection failures. One fixes a task leak issue
introduced in this merge window, the other an older issue with
handling allocation of a mapped buffer.
- Fix for a syzbot issue that triggers a kmalloc warning on attempting
an allocation that's too large
- Fix for an error injection failure causing a double put of a task,
introduced in this merge window
* tag 'io_uring-6.16-20250619' of git://git.kernel.dk/linux:
io_uring: fix potential page leak in io_sqe_buffer_register()
io_uring/sqpoll: don't put task_struct on tctx setup failure
io_uring: remove duplicate io_uring_alloc_task_context() definition
io_uring: fix task leak issue in io_wq_create()
io_uring/rsrc: validate buffer count with offset for cloning
|
|
Pull drm fixes from Dave Airlie:
"Bit of an uptick in fixes for rc3, msm and amdgpu leading the way,
with i915/xe/nouveau with a few each and then some scattered misc
bits, nothing looks too crazy:
msm:
- Display:
- Fixed DP output on SDM845
- Fixed 10nm DSI PLL init
- GPU:
- SUBMIT ioctl error path leak fixes
- drm half of stall-on-fault fixes
- a7xx: Missing CP_RESET_CONTEXT_STATE
- Skip GPU component bind if GPU is not in the device table
i915:
- Fix MIPI vtotal programming off by one on Broxton
- Fix PMU code for GCOV and AutoFDO enabled build
xe:
- A workaround update
- Fix memset on iomem
- Fix early wedge on GuC Load failure
amdgpu:
- DP tunneling fix
- LTTPR fix
- DSC fix
- DML2.x ABGR16161616 fix
- RMCM fix
- Backlight fixes
- GFX11 kicker support
- SDMA reset fixes
- VCN 5.0.1 fix
- Reset fix
- Misc small fixes
amdkfd:
- SDMA reset fix
- Fix race in GWS scheduling
nouveau:
- update docs reference
- fix backlight name buffer size
- fix UAF in r535 gsp rpc msg
- fix undefined shift
mgag200:
- drop export header
ast:
- drop export header
malidp:
- drop informational error
ssd130x:
- fix clear columns
etnaviv:
- scheduler locking fix
v3d:
- null pointer crash fix"
* tag 'drm-fixes-2025-06-20' of https://gitlab.freedesktop.org/drm/kernel: (50 commits)
drm/xe: Fix early wedge on GuC load failure
drm/xe: Fix memset on iomem
drm/xe/bmg: Update Wa_16023588340
drm/amdgpu/sdma5.2: init engine reset mutex
drm/amdkfd: Fix race in GWS queue scheduling
drm/amdgpu/sdma5: init engine reset mutex
drm/amdgpu: switch job hw_fence to amdgpu_fence
drm/amdgpu: Fix SDMA UTC_L1 handling during start/stop sequences
drm/amdgpu: Release reset locks during failures
drm/amd/display: Check dce_hwseq before dereferencing it
drm/amdgpu: VCN v5_0_1 to prevent FW checking RB during DPG pause
drm/amdgpu: Use logical instance ID for SDMA v4_4_2 queue operations
drm/amdgpu: Fix SDMA engine reset with logical instance ID
drm/amdgpu: add kicker fws loading for gfx11/smu13/psp13
drm/amdgpu: Add kicker device detection
drm/amd/display: Export full brightness range to userspace
drm/amd/display: Only read ACPI backlight caps once
drm/amd/display: Fix RMCM programming seq errors
drm/amd/display: Fix mpv playback corruption on weston
drm/amd/display: Add more checks for DSC / HUBP ONO guarantees
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto fixes from Herbert Xu:
"This fixes a regression in ahash (broken fallback finup) and
reinstates a Kconfig option to control the extra self-tests"
* tag 'v6.16-p5' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: ahash - Fix infinite recursion in ahash_def_finup
crypto: testmgr - reinstate kconfig control over full self-tests
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi fix from Mark Brown:
"One fix here from Thierry, fixing crashes caused by attempting to do
cache sync operations on uncached memory on Tegra platforms"
* tag 'spi-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: tegra210-qspi: Remove cache operations
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator fix from Mark Brown:
"One patch here from Heiko which fixes stability issues on some
Rockchip platforms by implementing soft start support and providing
startup time information for their regulators"
* tag 'regulator-fix-v6.16-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: fan53555: add enable_time support and soft-start times
|
|
https://gitlab.freedesktop.org/drm/xe/kernel into drm-fixes
Driver Changes:
- A workaround update (Vinay)
- Fix memset on iomem (Lucas)
- Fix early wedge on GuC Load failure (Daniele)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aFQ03kNzhbiNK7gW@fedora
|
|
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes
drm-misc-fixes for v6.16-rc3:
- vivante scheduler fix.
- v3d null pointer crash fix.
- fix backlight, booting GSP-RM, and potential integer shift overflow in nouveau.
- fix compiler warnings about unused linux/export.h
- fix malidp unknown modifier spam.
- fix for ssd130x.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://lore.kernel.org/r/d44bab7b-01f8-45a8-a7f4-5d3d563d2f9d@linux.intel.com
|
|
Add power-domain nodes for the power controller on RK3528.
Only PD_GPU can fully be powered down. PD_RKVDEC, PD_RKVENC, PD_VO and
PD_VPU are idle only power domains used by miscellaneous devices.
Because multiple of the miscellaneous device types currently complain
about the use of a power-domains prop, only PD_GPU is enabled.
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250518220707.669515-5-jonas@kwiboo.se
[changed to using numeric values, until the next merge-window]
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The ArmSoM Sige5 has several USB ports: a Type-A USB 3 port (USB2 lines
going through a hub), a Type-A USB 2.0 port (also going through a hub),
a Type-C DC input port that has absolutely no USB data connection and a
Type-C port with USB3.2 Gen1x1 that's also the maskrom programming port.
Enable these ports, and set the device role to be host for the host
ports.
The data capable Type-C USB port uses a fusb302 for data role switching.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250619-rk3576-sige5-usb-v5-2-9069a7e750e1@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add support for the Broadcom based WiFi/Bluetooth module (BW3752-50B1)
found in ArmSoM Sige5 boards version 1.2. This includes SDIO connected
WiFi with OOB interrupt support, as well as UART connected Bluetooth
with its respective interrupts.
PCM support for Bluetooth SCO audio is left out for now. It is connected
to SAI2 in M0 pin mode in case someone needs to enable it.
Note that v1.1 boards used a Realtek based module which is incompatible
with these DT nodes, so v1.1 would need a different overlay.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-4-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
ArmSoM Sige5 uses a soldered-on WiFi/BT module with WiFi on SDIO and BT
on UART. However, board v1.1 uses a Realtek based BL-M8852BS2, while
v1.2 uses a Broadcom based BW3752-50B1. They use the same pins and
controllers, but require different DT properties to enable.
Thankfully, the WiFi part at least works without explicitly listing it in
the device tree, albeit without OOB interrupt functionality.
Add required device tree nodes that do not depend on the board version so
that at least the WiFi module can appear on the SDIO bus.
WiFi OOB interrupt and Bluetooth function support are not enabled here, as
they require module specific properties.
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-3-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
RK3576 has one more SD/MMC controller than are currently listed in its
.dtsi, with the missing one intended as an SDIO controller. Add the
missing node (tested with the onboard WiFi module on ArmSoM Sige5 v1.2)
Signed-off-by: Alexey Charkov <alchark@gmail.com>
Link: https://lore.kernel.org/r/20250614-sige5-updates-v2-2-3bb31b02623c@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Enable gpu for rk3576 evb.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Link: https://lore.kernel.org/r/20250618063609.690332-1-andyshrk@163.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Fix a few issues in the panel section of the PinePhone Pro DTS:
- add the second part of the Himax HX8394 LCD panel controller
compatible
- as proposed by Diederik de Haas, reuse the mipi_out and ports
definitions from rk3399-base.dtsi instead of redefining them
- add a pinctrl for the LCD_RST signal for LCD1, derived from
LCD1_RST, which is on GPIO4_D1, as documented on pages 11
and 16 of the PinePhone Pro schematic
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Reviewed-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250619-dtb_fixes-v3-1-9cb02ddd8ce4@bootlin.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add bootph-all property to sysinfo EEPROM on Renesas R-Car Gen3
Salvator-X(S), ULCB, Condor, Ebisu, Draak boards. The sysinfo
EEPROM is used by U-Boot early on, mark it using the bootph-all
property. No functional change for the Linux kernel, this only
reduces the divergence of DTs between U-Boot and Linux.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250608215212.1619182-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The Sparrow Hawk board supplies the PCIe controller input clock and PCIe
bus clock from separate outputs of the Renesas 9FGV0441 clock generator.
Describe this split bus configuration in the board DT.
The topology looks as follows:
____________ _____________
| R-Car PCIe | | PCIe device |
| | | |
| PCIe RX<|==================|>PCIe TX |
| PCIe TX<|==================|>PCIe RX |
| | | |
| PCIe CLK<|======.. ..======|>PCIe CLK |
'------------' || || '-------------'
|| ||
____________ || ||
| 9FGV0441 | || ||
| | || ||
| CLK DIF0<|======'' ||
| CLK DIF1<|==========''
| CLK DIF2<|
| CLK DIF3<|
'------------'
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/20250607194541.79176-3-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Add nodes which describe the root ports in the PCIe controller DT nodes.
This can be used together with the pwrctrl driver to control clock and
power supply to a PCIe slot. For example usage, refer to the Sparrow
Hawk board.
Acked-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Link: https://lore.kernel.org/20250607194541.79176-2-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci into renesas-dts-for-v6.17
Merge slot clock support for PCI slots, which is a depdendency for
replacing the ad-hoc description of the split PCIe clock on Sparrow Hawk
by a proper hardware description.
|
|
On R-Car E3, Classical CAN0/1 and CAN-FD share the same sets of pins, so
only one of them can be used at the same time.
Add support for using CAN0 instead of CAN-FD channel 0 on Ebisu.
By default, only CAN-FD channel 0 is enabled, as before.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/612b999870dd64789041e4b0e9c568389b3fb95e.1749048320.git.geert+renesas@glider.be
|
|
The external RTC clock is populated on the RZ/N1D module, so describe it
and add a reference to the RTC node.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250604084211.28090-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable USB2.0 support on the RZ/V2N EVK board, CN2 connector on the EVK
supports host/function operation.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250528140453.181851-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
The Renesas RZ/V2N (R9A09G056) SoC features a single-channel USB2.0
interface with host and peripheral (function) support.
Add the ECHI, OHCI, USB2.0 PHY and reset control nodes for USB2.0
channel in R9A09G056 SoC DTSI.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250528140453.181851-2-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Sort DTS alphabetically. Fix up the placement of &rcar_sound {}.
No functional change.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250525160336.82960-1-marek.vasut+renesas@mailbox.org
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable the debug LEDs connected via the I2C GPIO extender.
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250522080112.26050-2-wsa+renesas@sang-engineering.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Enable USB2.0 support on the RZ/V2H EVK board, CN3 supports
host only operation and CN2 supports host/function operation.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250515183104.330964-3-prabhakar.mahadev-lad.rj@bp.renesas.com
Link: https://lore.kernel.org/20250613152216.201957-1-prabhakar.mahadev-lad.rj@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from wireless.
The ath12k fix to avoid FW crashes requires adding support for a
number of new FW commands so it's quite large in terms of LoC. The
rest is relatively small.
Current release - fix to a fix:
- ptp: fix breakage after ptp_vclock_in_use() rework
Current release - regressions:
- openvswitch: allocate struct ovs_pcpu_storage dynamically, static
allocation may exhaust module loader limit on smaller systems
Previous releases - regressions:
- tcp: fix tcp_packet_delayed() for peers with no selective ACK
support
Previous releases - always broken:
- wifi: ath12k: don't activate more links than firmware supports
- tcp: make sure sockets open via passive TFO have valid NAPI ID
- eth: bnxt_en: update MRU and RSS table of RSS contexts on queue
reset, prevent Rx queues from silently hanging after queue reset
- NFC: uart: set tty->disc_data only in success path"
* tag 'net-6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (59 commits)
net: airoha: Differentiate hwfd buffer size for QDMA0 and QDMA1
net: airoha: Compute number of descriptors according to reserved memory size
tools: ynl: fix mixing ops and notifications on one socket
net: atm: fix /proc/net/atm/lec handling
net: atm: add lec_mutex
mlxbf_gige: return EPROBE_DEFER if PHY IRQ is not available
net: airoha: Always check return value from airoha_ppe_foe_get_entry()
NFC: nci: uart: Set tty->disc_data only in success path
calipso: Fix null-ptr-deref in calipso_req_{set,del}attr().
MAINTAINERS: Remove Shannon Nelson from MAINTAINERS file
net: lan743x: fix potential out-of-bounds write in lan743x_ptp_io_event_clock_get()
eth: fbnic: avoid double free when failing to DMA-map FW msg
tcp: fix passive TFO socket having invalid NAPI ID
selftests: net: add test for passive TFO socket NAPI ID
selftests: net: add passive TFO test binary
selftests: netdevsim: improve lib.sh include in peer.sh
tipc: fix null-ptr-deref when acquiring remote ip of ethernet bearer
Octeontx2-pf: Fix Backpresure configuration
net: ftgmac100: select FIXED_PHY
net: ethtool: remove duplicate defines for family info
...
|
|
Memory allocated for the ECC engine conf is not released during spinand
cleanup. Below kmemleak trace is seen for this memory leak:
unreferenced object 0xffffff80064f00e0 (size 8):
comm "swapper/0", pid 1, jiffies 4294937458
hex dump (first 8 bytes):
00 00 00 00 00 00 00 00 ........
backtrace (crc 0):
kmemleak_alloc+0x30/0x40
__kmalloc_cache_noprof+0x208/0x3c0
spinand_ondie_ecc_init_ctx+0x114/0x200
nand_ecc_init_ctx+0x70/0xa8
nanddev_ecc_engine_init+0xec/0x27c
spinand_probe+0xa2c/0x1620
spi_mem_probe+0x130/0x21c
spi_probe+0xf0/0x170
really_probe+0x17c/0x6e8
__driver_probe_device+0x17c/0x21c
driver_probe_device+0x58/0x180
__device_attach_driver+0x15c/0x1f8
bus_for_each_drv+0xec/0x150
__device_attach+0x188/0x24c
device_initial_probe+0x10/0x20
bus_probe_device+0x11c/0x160
Fix the leak by calling nanddev_ecc_engine_cleanup() inside
spinand_cleanup().
Signed-off-by: Pablo Martin-Gomez <pmartin-gomez@freebox.fr>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- ltc4282: Avoid repeated register write operation
- occ: Fix unaligned accesses, and rework attribute registration to
reduce stack usage
- ftsteutates: Fix TOCTOU race
* tag 'hwmon-for-v6.16-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (ltc4282) avoid repeated register write
hwmon: (occ) fix unaligned accesses
hwmon: (occ) Rework attribute registration for stack usage
hwmon: (ftsteutates) Fix TOCTOU race in fts_read()
|
|
Lorenzo Bianconi says:
====================
net: airoha: Improve hwfd buffer/descriptor queues setup
Compute the number of hwfd buffers/descriptors according to the reserved
memory size if provided via DTS.
Reduce the required hwfd buffers queue size for QDMA1.
v3: https://lore.kernel.org/20250618-airoha-hw-num-desc-v3-0-18a6487cd75e@kernel.org
v1: https://lore.kernel.org/20250615-airoha-hw-num-desc-v1-0-8f88daa4abd7@kernel.org
====================
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-0-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
EN7581 SoC allows configuring the size and the number of buffers in
hwfd payload queue for both QDMA0 and QDMA1.
In order to reduce the required DRAM used for hwfd buffers queues and
decrease the memory footprint, differentiate hwfd buffer size for QDMA0
and QDMA1 and reduce hwfd buffer size to 1KB for QDMA1 (WAN) while
maintaining 2KB for QDMA0 (LAN).
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-2-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In order to not exceed the reserved memory size for hwfd buffers,
compute the number of hwfd buffers/descriptors according to the
reserved memory size and the size of each hwfd buffer (2KB).
Fixes: 3a1ce9e3d01b ("net: airoha: Add the capability to allocate hwfd buffers via reserved-memory")
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250619-airoha-hw-num-desc-v4-1-49600a9b319a@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless
Johannes Berg says:
====================
More fixes:
- ath12k
- avoid busy-waiting
- activate correct number of links
- iwlwifi
- iwldvm regression (lots of warnings)
- iwlmld merge damage regression (crash)
- fix build with some old gcc versions
- carl9170: don't talk to device w/o FW [syzbot]
- ath6kl: remove bad FW WARN [syzbot]
- ieee80211: use variable-length arrays [syzbot]
- mac80211
- remove WARN on delayed beacon update [syzbot]
- drop OCB frames with invalid source [syzbot]
* tag 'wireless-2025-06-18' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
wifi: iwlwifi: Fix incorrect logic on cmd_ver range checking
wifi: iwlwifi: dvm: restore n_no_reclaim_cmds setting
wifi: iwlwifi: cfg: Limit cb_size to valid range
wifi: iwlwifi: restore missing initialization of async_handlers_list (again)
wifi: ath6kl: remove WARN on bad firmware input
wifi: carl9170: do not ping device which has failed to load firmware
wifi: ath12k: don't wait when there is no vdev started
wifi: ath12k: don't use static variables in ath12k_wmi_fw_stats_process()
wifi: ath12k: avoid burning CPU while waiting for firmware stats
wifi: ath12k: fix documentation on firmware stats
wifi: ath12k: don't activate more links than firmware supports
wifi: ath12k: update link active in case two links fall on the same MAC
wifi: ath12k: support WMI_MLO_LINK_SET_ACTIVE_CMDID command
wifi: ath12k: update freq range for each hardware mode
wifi: ath12k: parse and save sbs_lower_band_end_freq from WMI_SERVICE_READY_EXT2_EVENTID event
wifi: ath12k: parse and save hardware mode info from WMI_SERVICE_READY_EXT_EVENTID event for later use
wifi: ath12k: Avoid CPU busy-wait by handling VDEV_STAT and BCN_STAT
wifi: mac80211: don't WARN for late channel/color switch
wifi: mac80211: drop invalid source address OCB frames
wifi: remove zero-length arrays
====================
Link: https://patch.msgid.link/20250618210642.35805-6-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The multi message support loosened the connection between the request
and response handling, as we can now submit multiple requests before
we start processing responses. Passing the attr set to NlMsgs decoding
no longer makes sense (if it ever did), attr set may differ message
by messsage. Isolate the part of decoding responsible for attr-set
specific interpretation and call it once we identified the correct op.
Without this fix performing SET operation on an ethtool socket, while
being subscribed to notifications causes:
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1096, in _op
# Exception| return self._ops(ops)[0]
# Exception| ~~~~~~~~~^^^^^
# File "tools/net/ynl/pyynl/lib/ynl.py", line 1040, in _ops
# Exception| nms = NlMsgs(reply, attr_space=op.attr_set)
# Exception| ^^^^^^^^^^^
The value of op we use on line 1040 is stale, it comes form the previous
loop. If a notification comes before a response we will update op to None
and the next iteration thru the loop will break with the trace above.
Fixes: 6fda63c45fe8 ("tools/net/ynl: fix cli.py --subscribe feature")
Fixes: ba8be00f68f5 ("tools/net/ynl: Add multi message support to ynl")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250618171746.1201403-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Eric Dumazet says:
====================
net: atm: protect dev_lec[] with a mutex
Based on an initial syzbot report.
First patch is adding lec_mutex to address the report.
Second patch protects /proc/net/atm/lec operations.
We probably should delete this driver, it seems quite broken.
====================
Link: https://patch.msgid.link/20250618140844.1686882-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
/proc/net/atm/lec must ensure safety against dev_lec[] changes.
It appears it had dev_put() calls without prior dev_hold(),
leading to imbalance and UAF.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com> # Minor atm contributor
Link: https://patch.msgid.link/20250618140844.1686882-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
