summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-06-07Merge tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6 ↵Olof Johansson
into fixes From Shawn Guo, mxs fixes for 3.10: - Since the time we move to MULTI_IRQ_HANDLER, the 0x7f polling for no interrupt in icoll_handle_irq() becomes insane, because 0x7f is an valid interrupt number, the irq of gpio bank 0. That unnecessary polling results in the driver not detecting when irq 0x7f is active which makes the machine effectively dead lock. The fix removes the interrupt poll loop and allows usage of gpio0 interrupt without an infinite loop. * tag 'mxs-fixes-3.10' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: mxs: icoll: Fix interrupts gpio bank 0 Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-07Merge tag 'imx-fixes-3.10-2' of ↵Olof Johansson
git://git.linaro.org/people/shawnguo/linux-2.6 into fixes From Shawn Guo, imx fixes for 3.10, take 2: - One device tree fix for all spi node to have per clock added. The clock is needed by spi driver to calculate bit rate divisor. The spi node in the current device trees either does not have the clock or is defined as dummy clock, in which case the driver probe will fail or spi will run at a wrong bit rate. - Two imx6q clock fixes, which correct axi_sels and ldb_di_sels. * tag 'imx-fixes-3.10-2' of git://git.linaro.org/people/shawnguo/linux-2.6: ARM: imx: clk-imx6q: AXI clock select index is incorrect ARM: dts: imx: fix clocks for cspi ARM i.MX6q: fix for ldb_di_sels Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-07ARM: exynos: add debug_ll_io_init() call in exynos_init_io()Doug Anderson
If the early MMU mapping of the UART happens to get booted out of the TLB between the start of paging_init() and when we finally re-add the UART at the very end of s3c_init_cpu(), we'll get a hang at bootup if we've got early_printk enabled. Avoid this hang by calling debug_ll_io_init() early. Without this patch, you can reliably reproduce a hang when early printk is enabled by adding flush_tlb_all() at the start of exynos_init_io(). After this patch the hang goes away. Signed-off-by: Doug Anderson <dianders@chromium.org> Acked-by: Kukjin Kim <kgene.kim@samsung.com> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-07Merge tag 'renesas-fixes-for-v3.10' of ↵Olof Johansson
git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into fixes From Simon Horman, Renesas ARM based SoC fixes for v3.10: - Correction to USB OVC and PENC pin groupings on r8a7779 SoC. This avoids conflicts when the USB_OVCn pins are used by another function. This has been observed to be a problem in v3.10-rc1. - Update CMT clock rating for sh73a0 SoC to resolve boot failure on kzm9g-reference. This resolves a regression between v3.9 and v3.10-rc1. * tag 'renesas-fixes-for-v3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: ARM: shmobile: sh73a0: Update CMT clockevent rating to 80 sh-pfc: r8a7779: Don't group USB OVC and PENC pins Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-07ARM: EXYNOS: uncompress - print debug messages if DEBUG_LL is definedTushar Behera
Printing low-level debug messages make an assumption that the specified UART port has been preconfigured by the bootloader. Incorrectly specified UART port results in system getting stalled while printing the message "Uncompressing Linux... done, booting the kernel" This UART port number is specified through S3C_LOWLEVEL_UART_PORT. Since the UART port might different for different board, it is not possible to specify it correctly for every board that use a common defconfig file. Calling this print subroutine only when DEBUG_LL fixes the problem. By disabling DEBUG_LL in default config file, we would be able to boot multiple boards with different default UART ports. With this current approach, we miss the print "Uncompressing Linux... done, booting the kernel." when DEBUG_LL is not defined. Signed-off-by: Tushar Behera <tushar.behera@linaro.org> Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-07Merge tag 'vt8500/dts-3.11' of git://github.com/linux-wmt/linux-vtwm into ↵Olof Johansson
next/dt From Tony Prisk, vt8500 devicetree updates for 3.11. * tag 'vt8500/dts-3.11' of git://github.com/linux-wmt/linux-vtwm: dts: vt8500: Correct reference clock on WM8850 SoCs dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files dts: vt8500: Populate missing PLL nodes dts: clk: vt8500: Update SoC dtsi to use WM8850 PLL clocks dts: vt8500: Update serial nodes and disable by default in SoC files dts: vt8500: Add devicetree support for WM8750 SoC and APC8750 board dts: vt8500: Fix invalid/missing cpu nodes for soc files. Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-07Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dtOlof Johansson
From Lorenzo Pieralisi, this is a series of patches that cleans up the CPU nodes in most of the SoC dtsi files to conform to the standard bindings. * 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp: ARM: dts: sunxi: cpus/cpu nodes dts updates ARM: dts: spear: cpus/cpu nodes dts updates ARM: dts: sh7372: cpus/cpu nodes dts updates ARM: dts: r8a7740: cpus/cpu nodes dts updates ARM: dts: pxa2xx: cpus/cpu nodes dts updates ARM: dts: prima2: cpus/cpu node dts updates ARM: dts: picoxcell: cpus/cpu nodes dts updates ARM: dts: omap: cpus/cpu nodes dts updates ARM: dts: lpc32xx: cpus/cpu nodes dts updates ARM: dts: imx: cpus/cpu nodes dts updates ARM: dts: exynos5440: cpus/cpu nodes dts updates ARM: dts: at91: cpus/cpu node dts updates ARM: dts: armada-370-xp: cpus/cpu node dts updates ARM: dts: am33xx: cpus/cpu nodes dts updates Signed-off-by: Olof Johansson <olof@lixom.net>
2013-06-07Merge tag 'rdma-for-linus' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband Pull infiniband fixes from Roland Dreier: - qib RCU/lockdep fix - iser device removal fix, plus doc fixes * tag 'rdma-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/roland/infiniband: IB/qib: Fix lockdep splat in qib_alloc_lkey() MAINTAINERS: Add entry for iSCSI Extensions for RDMA (iSER) initiator IB/iser: Add Mellanox copyright IB/iser: Fix device removal flow
2013-06-07Merge tag 'vfio-v3.10-rc5' of git://github.com/awilliam/linux-vfioLinus Torvalds
Pull vfio fix from Alex Williamson: "fix rmmod crash" * tag 'vfio-v3.10-rc5' of git://github.com/awilliam/linux-vfio: vfio: fix crash on rmmod
2013-06-07Merge tag 'ecryptfs-3.10-rc5-msync' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs Pull ecryptfs fixes from Tyler Hicks: - Fixes how eCryptfs handles msync to sync both the upper and lower file - A couple of MAINTAINERS updates * tag 'ecryptfs-3.10-rc5-msync' of git://git.kernel.org/pub/scm/linux/kernel/git/tyhicks/ecryptfs: eCryptfs: Check return of filemap_write_and_wait during fsync Update eCryptFS maintainers ecryptfs: fixed msync to flush data
2013-06-07kobject: sanitize argument for format stringKees Cook
Unlike kobject_set_name(), the kset_create_and_add() interface does not provide a way to use format strings, so make sure that the interface cannot be abused accidentally. It looks like all current callers use static strings, so there's no existing flaw. Signed-off-by: Kees Cook <keescook@chromium.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07sysfs_notify is only possible on file attributesNick Dyer
If sysfs_notify is called on a binary attribute, bad things can happen, so prevent it. Note, no in-kernel usage of this is currently present, but in the future, it's good to be safe. Changes in V2: - Also ignore sysfs_notify on dirs, links - Use WARN_ON rather than silently failing - Compiled and tested (huge apologies about first submission) Signed-off-by: Nick Dyer <nick.dyer@itdev.co.uk> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2013-06-07Merge branch 'for-3.10' of git://git.samba.org/sfrench/cifs-2.6Linus Torvalds
Pull CIFS fix from Steve French: "Fix one byte buffer overrun with prefixpaths on cifs mounts which can cause a problem with mount depending on the string length" * 'for-3.10' of git://git.samba.org/sfrench/cifs-2.6: cifs: fix off-by-one bug in build_unc_path_to_root
2013-06-07net_sched: qdisc_get_rtab() must check data[] arrayEric Dumazet
qdisc_get_rtab() should check not only the keys in struct tc_ratespec, but also the full data[] array. "tc ... linklayer atm " only perturbs values in the 256 slots array. Signed-off-by: Eric Dumazet <edumazet@google.com> Signed-off-by: David S. Miller <davem@davemloft.net>
2013-06-07Merge tag 'omap-fixes-b-for-3.10-rc' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/pjw/omap-pending into omap-for-v3.10/fixes More OMAP hwmod and clock fixes for v3.10-rc. Fixes the AM33xx UART2. Also fixes some CCF-related breakage on OMAP36xx/37xx, affecting DSS at the very least. Basic test logs for this branch are here: http://www.pwsan.com/omap/testlogs/fixes_b_v3.10-rc/20130606093449/
2013-06-07Merge branch 'dts-fixes-for-3.10' of ↵Tony Lindgren
git://git.kernel.org/pub/scm/linux/kernel/git/bcousson/linux-omap-dt into omap-for-v3.10/fixes
2013-06-08dmatest: do not allow to interrupt ongoing testsAndy Shevchenko
When user interrupts ongoing transfers the dmatest may end up with console lockup, oops, or data mismatch. This patch prevents user to abort any ongoing test. Documentation is updated accordingly. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Reported-by: Will Deacon <will.deacon@arm.com> Tested-by: Will Deacon <will.deacon@arm.com> Signed-off-by: Vinod Koul <vinod.koul@intel.com>
2013-06-07Merge tag 'sound-3.10' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound Pull sound fixes from Takashi Iwai: - A pile of small regression fix patches for HD-audio VIA codecs - Quirks for HD-aduio and USB-audio devices - A trivial SIS7019 error path fix * tag 'sound-3.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio - Fix invalid volume resolution on Logitech HD webcam c270 ALSA: usb-audio - Apply Logitech QuickCam Pro 9000 quirk only to audio iface ALSA: hda/via - Clean up duplicated codes ALSA: hda/via - Fix wrongly cleared pins after suspend on VT1802 ALSA: hda - Add keep_eapd_on flag to generic parser ALSA: hda - Allow setting automute/automic hooks after parsing ALSA: hda/via - Disable broken dynamic power control ALSA: usb-audio: fix Roland/Cakewalk UM-3G support ALSA: hda - Add headset quirk for two Dell machines ALSA: hda - add dock support for Thinkpad T431s ALSA: sis7019: fix error return code in sis_chip_create()
2013-06-07Merge tag 'pm+acpi-3.10-rc5' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm Pull power management and ACPI fixes from Rafael J Wysocki: - Fix for an ACPI PM regression causing Toshiba P870-303 to crash during boot from Rafael J Wysocki. - ACPI fix for an issue causing some drivers to attempt to bind to devices they shouldn't touch from Aaron Lu. - Fix for a recent cpufreq regression related to a possible race with CPU offline from Michael Wang. - ACPI cpufreq regression fix for an issue causing turbo frequencies to be underutilized in some cases from Ross Lagerwall. - cpufreq-cpu0 driver fix related to incorrect clock ACPI usage from Guennadi Liakhovetski. - HP WMI driver fix for an issue causing GPS initialization and poweroff failures on HP Elitebook 6930p from Lan Tianyu. - APEI (ACPI Platform Error Interface) fix for an issue in the error code path in ghes_probe() from Wei Yongjun. - New ACPI video driver blacklist entries for HP m4 and HP Pavilion g6 from Alex Hung and Ash Willis. * tag 'pm+acpi-3.10-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization cpufreq: cpufreq-cpu0: use the exact frequency for clk_set_rate() cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work() ACPI / scan: do not match drivers against objects having scan handlers ACPI / APEI: fix error return code in ghes_probe() acpi-cpufreq: set current frequency based on target P-State ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6 ACPI / video: ignore BIOS initial backlight value for HP m4 x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup()
2013-06-07hwmon: (adm1021) Strengthen chip detection for ADM1021, LM84 and MAX1617Guenter Roeck
On a system with both MAX1617 and JC42 sensors, JC42 sensors can be misdetected as LM84. Strengthen detection sufficiently enough to avoid this misdetection. Also improve detection for ADM1021. Modeled after chip detection code in sensors-detect command. Cc: stable@vger.kernel.org Signed-off-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Jean Delvare <khali@linux-fr.org> Acked-by: Jean Delvare <khali@linux-fr.org>
2013-06-07ASoC: tlv320aic3x: Remove deadlock from snd_soc_dapm_put_volsw_aic3x()Andreas Irestål
When calling snd_soc_dapm_sync(), it eventually tries to lock the same mutex already locked in snd_soc_dapm_put_volsw_aic3x() and a deadlock occurs. By moving the mutex unlock to just before snd_soc_dapm_sync(), this deadlock is prevented. This problem was introduced in Linux 3.5 Signed-off-by: Andreas Irestål <Andreas.Irestal@axis.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-07netfilter: nfnetlink_queue: fix missing HW protocolPablo Neira Ayuso
Locally generated IPv4 and IPv6 traffic gets skb->protocol unset, thus passing zero. ip6tables -I OUTPUT -j NFQUEUE libmnl/examples/netfilter# ./nf-queue 0 & ping6 ::1 packet received (id=1 hw=0x0000 hook=3) ^^^^^^ Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
2013-06-07ARM: OMAP4: hwmod data: Clean up the data fileSricharan R
- The IO resource information like dma request lines, irq number and ocp address space can be populated via dt blob. So such data is stripped from OMAP4 SOC hwmod data file. - The devices which are still missing the device tree bindings, address space entries are not removed yet. When such devices add the dt bindings, respective address space data can be deleted. - Also other unnecessary hwmods like firewalls are removed as a part of this. Since emif was getting registered only because of this firewalls links, the mpu->emif direct link is added now. The above update, results in reduction of about ~1650 lines of code. Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Acked-by: Benoit Cousson <benoit.cousson@linaro.org> Acked-by: Paul Walmsley <paul@pwsan.com> [tony@atomide.com: updated for omap44xx_usb_phy_and_pll_addrs, dropped mcspi and mmc changes to avoid regressions on omap4sdp] Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-07ncpfs: fix rmdir returns Device or resource busyDave Chiluk
1d2ef5901483004d74947bbf78d5146c24038fe7 caused a regression in ncpfs such that directories could no longer be removed. This was because ncp_rmdir checked to see if a dentry could be unhashed before allowing it to be removed. Since 1d2ef5901483004d74947bbf78d5146c24038fe7 introduced a change that incremented dentry->d_count causing it to always be greater than 1 unhash would always fail. Thus causing the error path in ncp_rmdir to always be taken. Removing this error path is safe as unhashing is still accomplished by calls to dput from vfs_rmdir. Signed-off-by: Dave Chiluk <chiluk@canonical.com> Signed-off-by: Petr Vandrovec <petr@vandrovec.name> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
2013-06-07Merge branch 'am33xx' into omap-for-v3.11/cleanupTony Lindgren
2013-06-07ARM: AM33XX: hwmod data: irq, dma and addr info clean upVaibhav Hiremath
AM33XX only supports DT boot mode and with addition of extracting module resources like, irq, dma and address space from DT block, so now we can remove duplicate information from hwmod data file. This patch cleanups-up/deletes, - All references to "omap_hwmod_irq_info" data. - All references to "omap_hwmod_dma_info" data. - References to "omap_hwmod_addr_space" of the modules for which DT node is available with required address space information. - For the modules where "sysc" field is not applicable, we don't need module address space, so remove them as well. - The hwmod like firewall etc which are not useful are also deleted. This cleanup gets us around ~1100 LOC of negative diff. Patch is boot tested on AM335x-EVM along with below modules - - Matrix-keypad - Volume up/down keys - Ethernet - RTC - WDT Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com> Signed-off-by: Sricharan R <r.sricharan@ti.com> Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com> Acked-by: Paul Walmsley <paul@pwsan.com> Signed-off-by: Tony Lindgren <tony@atomide.com>
2013-06-07ASoC: dapm: Treat DAI widgets like AIF widgets for powerMark Brown
Even though they are virtual widgets DAI widgets still get counted for the DAPM context power management so we can't just use the active state to check if they should be powered as they may not be part of a complete path. Instead split them into input and output widgets and do the same power checks as we perform on AIFs. Reported-by: Stephen Warren <swarren@nvidia.com> Tested-by: Stephen Warren <swarren@nvidia.com> Signed-off-by: Mark Brown <broonie@linaro.org>
2013-06-07Merge branch 'pm-fixes'Rafael J. Wysocki
* pm-fixes: cpufreq: cpufreq-cpu0: use the exact frequency for clk_set_rate() cpufreq: protect 'policy->cpus' from offlining during __gov_queue_work() acpi-cpufreq: set current frequency based on target P-State
2013-06-07Merge branch 'acpi-fixes'Rafael J. Wysocki
* acpi-fixes: ACPI / PM: Do not execute _PS0 for devices without _PSC during initialization ACPI / scan: do not match drivers against objects having scan handlers ACPI / APEI: fix error return code in ghes_probe() ACPI / video: ignore BIOS initial backlight value for HP Pavilion g6 ACPI / video: ignore BIOS initial backlight value for HP m4 x86 / platform / hp_wmi: Fix bluetooth_rfkill misuse in hp_wmi_rfkill_setup()
2013-06-07ACPI / PM: Do not execute _PS0 for devices without _PSC during initializationRafael J. Wysocki
Commit b378549 (ACPI / PM: Do not power manage devices in unknown initial states) added code to force devices without _PSC, but having _PS0 defined in the ACPI namespace, into ACPI power state D0 by executing _PS0 for them. That turned out to break Toshiba P870-303, however, so revert that code. References: https://bugzilla.kernel.org/show_bug.cgi?id=58201 Reported-and-tested-by: Jerome Cantenot <jerome.cantenot@gmail.com> Tracked-down-by: Lan Tianyu <tianyu.lan@intel.com> Cc: 3.9+ <stable@vger.kernel.org> Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
2013-06-07ARM: shmobile: marzen: keep local function as staticKuninori Morimoto
marzen_init_late() should be static Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: bockw: add SDHI0 supportKuninori Morimoto
This patch is directly accessing to PUPR4 register which can control SDHI0 CD/WP pin pull-up setting. It should be replaced in the future. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: marzen: Use INTC External IRQ pin driver for SMSCSimon Horman
Update the marzen board to use the INTC External IRQ pin driver for SMSC. This code was originally posted by Magnus Damm as part of "ARM: shmobile: INTC External IRQ pin driver on r8a7779" but somehow omitted when I applied that patch. Cc: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: lager: support GPIO switchesSimon Horman
The lager board has pins 1 - 4 of SW2 wired up to GPIO pins. This patch allows access to those pins as KEYS 1 - 4 using gpio-keys. Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: lager: Add GPIO LEDsSimon Horman
The board has 3 LEDs connected to GPIOs. Add a led-gpio device to support them. Based on "ARM: shmobile: marzen: Add GPIO LEDs" by Laurent Pinchart. Cc: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: bockw: add dummy regulators for SMSCKuninori Morimoto
SMSC driver will try to get regulator if .config had CONFIG_REGULATOR, and, shmobile_defconfig has it. SMSC driver on Bock-W board will be failed if it doens't have dummy regulator settings. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: bockw: add CN9 SCIF/RCAN selection dipswitch explanationKuninori Morimoto
Debug serial (= SCIF0) is connected to CN9 upper side, and it is shared by RCAN. This patch adds SCIF/RCAN dipswitch explanation on comment area for developers. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: kzm9g: add AS3711 PMIC platform dataGuennadi Liakhovetski
KZM9G uses an AS3711 PMIC to supply power to the CPU and the LCD backlight. The PMIC on the board is pre-programmed to supply correct voltages to the CPU, power supply to the backlight has to be turned on at run-time. The latter is currently performed by a hard-coded I2C command sequence in the board file. This patch removes the backlight hack and instead adds an I2C device to instantiate the AS3711 MFD driver, which will add a regulator device to dynamically adjust CPU voltages and a backlight device. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski@gmx.de> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: kzm9d: resigser smsc911x platform device with id -1Simon Horman
As the kzm9d only has one smsc911x device it may be registered as a platform device with id -1. This allows the kzm9d board to access the smsc911x device when CONFIG_REGULATOR (and CONFIG_REGULATOR_FIXED_VOLTAGE) are set. The motivation for which is twofold: using regulators seems to be generally a good thing; it will move the kzm9d defconfig one step closer to being able to be consolidated with other shmobile defconfigs. An alternate but so far untested approach would be to update the definition of dummy_supplies in board-kzm9d.c to use "smsc911x.0" instead of "smsc911x". Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: bockw: define FPGA address and rename iomem variableKuninori Morimoto
Bock-W board will needs more board specific ioremap() method. This patch tidyup current FPGA specific settings Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: ape6evm: MP clock parent become EXTAL2Kuninori Morimoto
The orignal commit 3263e09d287fbaa8a9424b5e69396599a3bbd518 (ARM: shmobile: Initial r8a73a4 SoC support V3) put MP clock parent as EXTAL2, but its code was removed on DIV6 clock support commit. This patch makes it consistent. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07Merge branches 'pinmux' and 'soc' into boards-baseSimon Horman
Conflicts: arch/arm/mach-shmobile/Kconfig arch/arm/mach-shmobile/include/mach/r8a7778.h arch/arm/mach-shmobile/setup-r8a7778.c
2013-06-07ARM: shmobile: sh73a0: div4 clocks must check the kick bit before changing rateGuennadi Liakhovetski
According to the datasheet, it is not allowed to change div4 clock rates if an earlier rate change operation is still in progress, as indicated by a set kick bit. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: sh73a0: do not overwrite all div4 clock operationsGuennadi Liakhovetski
An earlier commit "ARM: shmobile: sh73a0: add support for adjusting CPU frequency" intended to replace some clock operations only for the Z-clock, instead it replaced them for all div4 clocks, since all div4 clocks share the same copy of clock operations. Fix this by using a separate clock operations structure for Z-clock. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: sh73a0: Always use shmobile_setup_delay()Magnus Damm
Break out the function sh73a0_init_delay() that now gets called both for the C version of the code and the DT -reference boards. This way we handle both cases in the same way. Allows us to boot with TWD only in the kernel configuration for C board code. TWD is not yet enabled in the case of DT -reference - this due to a dependency on CCF. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: sh73a0: add CPUFreq supportGuennadi Liakhovetski
This patch enables the use of the generic cpufreq-cpu0 driver on sh73a0. Providing a regulator, a list of OPPs in DT, combined with a virtual cpufreq-cpu0 platform device and a clock, attached to it is everything, the cpufreq-cpu0 driver needs. The first sh73a0 platform, implementing such CPUFreq support is kzm9g-reference. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: sh73a0: add support for adjusting CPU frequencyGuennadi Liakhovetski
On SH73A0 the output of PLL0 is supplied to two dividers, feeding clock to the CPU core and SGX. Lower CPU frequencies allow the use of lower supply voltages and thus reduce power consumption. Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a7790: add TPU PWM supportLaurent Pinchart
Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a7790: Make private clock arrays staticLaurent Pinchart
Both clock-r8a7740.c and clock-r8a7790.c define a div4_clks array as non-static. Compiling support for both SoCs thus result in a symbol redefinition. Fix it by defining the arrays as static. Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-06-07ARM: shmobile: r8a7790: add div6 clocksKuninori Morimoto
DIV6 clocks control SD*/MMC* core clocks. Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
generated by cgit (git 2.34.1) at 2025-10-03 12:18:11 +0000