| Age | Commit message (Collapse) | Author |
|---|
|
Justin Iurman says:
====================
net: fix lwtunnel reentry loops
When the destination is the same after the transformation, we enter a
lwtunnel loop. This is true for most of lwt users: ioam6, rpl, seg6,
seg6_local, ila_lwt, and lwt_bpf. It can happen in their input() and
output() handlers respectively, where either dst_input() or dst_output()
is called at the end. It can also happen in xmit() handlers.
Here is an example for rpl_input():
dump_stack_lvl+0x60/0x80
rpl_input+0x9d/0x320
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
[...]
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
lwtunnel_input+0x64/0xa0
ip6_sublist_rcv_finish+0x85/0x90
ip6_sublist_rcv+0x236/0x2f0
... until rpl_do_srh() fails, which means skb_cow_head() failed.
This series provides a fix at the core level of lwtunnel to catch such
loops when they're not caught by the respective lwtunnel users, and
handle the loop case in ioam6 which is one of the users. This series
also comes with a new selftest to detect some dst cache reference loops
in lwtunnel users.
====================
Link: https://patch.msgid.link/20250314120048.12569-1-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
As recently specified by commit 0ea09cbf8350 ("docs: netdev: add a note
on selftest posting") in net-next, the selftest is therefore shipped in
this series. However, this selftest does not really test this series. It
needs this series to avoid crashing the kernel. What it really tests,
thanks to kmemleak, is what was fixed by the following commits:
- commit c71a192976de ("net: ipv6: fix dst refleaks in rpl, seg6 and
ioam6 lwtunnels")
- commit 92191dd10730 ("net: ipv6: fix dst ref loops in rpl, seg6 and
ioam6 lwtunnels")
- commit c64a0727f9b1 ("net: ipv6: fix dst ref loop on input in seg6
lwt")
- commit 13e55fbaec17 ("net: ipv6: fix dst ref loop on input in rpl
lwt")
- commit 0e7633d7b95b ("net: ipv6: fix dst ref loop in ila lwtunnel")
- commit 5da15a9c11c1 ("net: ipv6: fix missing dst ref drop in ila
lwtunnel")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-4-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Fix the lwtunnel_output() reentry loop in ioam6_iptunnel when the
destination is the same after transformation. Note that a check on the
destination address was already performed, but it was not enough. This
is the example of a lwtunnel user taking care of loops without relying
only on the last resort detection offered by lwtunnel.
Fixes: 8cb3bf8bff3c ("ipv6: ioam: Add support for the ip6ip6 encapsulation")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-3-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch acts as a parachute, catch all solution, by detecting
recursion loops in lwtunnel users and taking care of them (e.g., a loop
between routes, a loop within the same route, etc). In general, such
loops are the consequence of pathological configurations. Each lwtunnel
user is still free to catch such loops early and do whatever they want
with them. It will be the case in a separate patch for, e.g., seg6 and
seg6_local, in order to provide drop reasons and update statistics.
Another example of a lwtunnel user taking care of loops is ioam6, which
has valid use cases that include loops (e.g., inline mode), and which is
addressed by the next patch in this series. Overall, this patch acts as
a last resort to catch loops and drop packets, since we don't want to
leak something unintentionally because of a pathological configuration
in lwtunnels.
The solution in this patch reuses dev_xmit_recursion(),
dev_xmit_recursion_inc(), and dev_xmit_recursion_dec(), which seems fine
considering the context.
Closes: https://lore.kernel.org/netdev/2bc9e2079e864a9290561894d2a602d6@akamai.com/
Closes: https://lore.kernel.org/netdev/Z7NKYMY7fJT5cYWu@shredder/
Fixes: ffce41962ef6 ("lwtunnel: support dst output redirect function")
Fixes: 2536862311d2 ("lwt: Add support to redirect dst.input")
Fixes: 14972cbd34ff ("net: lwtunnel: Handle fragmentation")
Signed-off-by: Justin Iurman <justin.iurman@uliege.be>
Link: https://patch.msgid.link/20250314120048.12569-2-justin.iurman@uliege.be
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Currently the API emac_update_hardware_stats() reads different ICSSG
stats without any lock protection.
This API gets called by .ndo_get_stats64() which is only under RCU
protection and nothing else. Add lock to this API so that the reading of
statistics happens during lock.
Fixes: c1e10d5dc7a1 ("net: ti: icssg-prueth: Add ICSSG Stats")
Signed-off-by: MD Danish Anwar <danishanwar@ti.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250314102721.1394366-1-danishanwar@ti.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ->send() operation frees skb so save the length before calling
->send() to avoid a use after free.
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/c751531d-4af4-42fe-affe-6104b34b791d@stanley.mountain
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Otherwise gcc 13 generates conditional forward jumps (aka branch
mispredict by default) for build_open_flags() being succesfull.
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250320092331.1921700-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Merge the slab feature branch kfree_rcu_tiny for 6.15:
- Move the TINY_RCU kvfree_rcu() implementation from RCU to SLAB
subsystem and cleanup its integration.
|
|
Matthieu Baerts says:
====================
mptcp: pm: prep work for new ops and sysctl knobs
Here are a few cleanups, preparation work for the new PM ops, and sysctl
knobs.
- Patch 1: reorg: move generic NL code used by all PMs to pm_netlink.c.
- Patch 2: use kmemdup() instead of kmalloc + copy.
- Patch 3: small cleanup to use pm var instead of msk->pm.
- Patch 4: reorg: id_avail_bitmap is only used by the in-kernel PM.
- Patch 5: use struct_group to easily reset a subset of PM data vars.
- Patch 6: introduce the minimal skeleton for the new PM ops.
- Patch 7: register in-kernel and userspace PM ops.
- Patch 8: new net.mptcp.path_manager sysctl knob, deprecating pm_type.
- Patch 9: map the new path_manager sysctl knob with pm_type.
- Patch 10: map the old pm_type sysctl knob with path_manager.
- Patch 11: new net.mptcp.available_path_managers sysctl knob.
- Patch 12: new test to validate path_manager and pm_type mapping.
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
====================
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-0-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch checks if the newly added net.mptcp.path_manager is mapped
successfully from or to the old net.mptcp.pm_type in userspace_pm.sh.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-12-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similarly to net.mptcp.available_schedulers, this patch adds a new one
net.mptcp.available_path_managers to list the available path managers.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-11-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds a new proc_handler "proc_pm_type" for "pm_type" to
map old path manager sysctl "pm_type" to the newly added "path_manager".
path_manager pm_type
MPTCP_PM_TYPE_KERNEL -> "kernel"
MPTCP_PM_TYPE_USERSPACE -> "userspace"
It is important to add this to keep a compatibility with the now
deprecated pm_type sysctl knob.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-10-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch maps the newly added path manager sysctl "path_manager"
to the old one "pm_type".
path_manager pm_type
"kernel" -> MPTCP_PM_TYPE_KERNEL
"userspace" -> MPTCP_PM_TYPE_USERSPACE
others -> __MPTCP_PM_TYPE_NR
It is important to add this to keep a compatibility with the now
deprecated pm_type sysctl knob.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-9-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Similar to net.mptcp.scheduler, a new net.mptcp.path_manager sysctl knob
is added to determine which path manager will be used by each newly
created MPTCP socket by setting the name of it.
Dealing with an explicit name is easier than with a number, especially
when more PMs will be introduced.
This sysctl knob makes the old one "pm_type" deprecated.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-8-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch defines the original in-kernel netlink path manager as a
new struct mptcp_pm_ops named "mptcp_pm_kernel", and register it in
mptcp_pm_kernel_register(). And define the userspace path manager as
a new struct mptcp_pm_ops named "mptcp_pm_userspace", and register it
in mptcp_pm_init().
To ensure that there's always a valid path manager available, the default
path manager "mptcp_pm_kernel" will be skipped in mptcp_pm_unregister().
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-7-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to allow users to develop their own BPF-based path manager,
this patch defines a struct ops "mptcp_pm_ops" for an MPTCP path
manager, which contains a set of interfaces. Currently only init()
and release() interfaces are included, subsequent patches will add
others step by step.
Add a set of functions to register, unregister, find and validate a
given path manager struct ops.
"list" is used to add this path manager to mptcp_pm_list list when
it is registered. "name" is used to identify this path manager.
mptcp_pm_find() uses "name" to find a path manager on the list.
mptcp_pm_unregister is not used in this set, but will be invoked in
.unreg of struct bpf_struct_ops. mptcp_pm_validate() will be invoked
in .validate of struct bpf_struct_ops. That's why they are exported.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-6-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
This patch adds a "struct_group(reset, ...)" in struct mptcp_pm_data to
simplify the reset, and make sure we don't miss any.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-5-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
id_avail_bitmap of struct mptcp_pm_data is currently only used by the
in-kernel PM, so this patch moves its initialization operation under
the "if (pm_type == MPTCP_PM_TYPE_KERNEL)" condition.
Suggested-by: Matthieu Baerts <matttbe@kernel.org>
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-4-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The variable "pm" has been defined in mptcp_pm_fully_established()
and mptcp_pm_data_reset() as "msk->pm", so use "pm" directly instead
of using "msk->pm".
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-3-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Instead of using kmalloc() or kzalloc() to allocate an entry and
then immediately duplicate another entry to the newly allocated
one, kmemdup() helper can be used to simplify the code.
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-2-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The registration of mptcp_genl_family is useful for both the in-kernel
and the userspace PM. It should then be done in pm_netlink.c.
On the other hand, the registration of the in-kernel pernet subsystem is
specific to the in-kernel PM, and should stay there in pm_kernel.c.
Reviewed-by: Mat Martineau <martineau@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313-net-next-mptcp-pm-ops-intro-v1-1-f4e4a88efc50@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In architectures that use the polling bit, current_clr_polling() employs
smp_mb() to ensure that the clearing of the polling bit is visible to
other cores before checking TIF_NEED_RESCHED.
However, smp_mb() can be costly. Given that clear_bit() is an atomic
operation, replacing smp_mb() with smp_mb__after_atomic() is appropriate.
Many architectures implement smp_mb__after_atomic() as a lighter-weight
barrier compared to smp_mb(), leading to performance improvements.
For instance, on x86, smp_mb__after_atomic() is a no-op. This change
eliminates a smp_mb() instruction in the cpuidle wake-up path, saving
several CPU cycles and thereby reducing wake-up latency.
Architectures that do not use the polling bit will retain the original
smp_mb() behavior to ensure that existing dependencies remain unaffected.
Signed-off-by: Yujun Dong <yujundong@pascal-lab.net>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20241230141624.155356-1-yujundong@pascal-lab.net
|
|
With the device instance lock, there is now a possibility of a deadlock:
[ 1.211455] ============================================
[ 1.211571] WARNING: possible recursive locking detected
[ 1.211687] 6.14.0-rc5-01215-g032756b4ca7a-dirty #5 Not tainted
[ 1.211823] --------------------------------------------
[ 1.211936] ip/184 is trying to acquire lock:
[ 1.212032] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_set_allmulti+0x4e/0xb0
[ 1.212207]
[ 1.212207] but task is already holding lock:
[ 1.212332] ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.212487]
[ 1.212487] other info that might help us debug this:
[ 1.212626] Possible unsafe locking scenario:
[ 1.212626]
[ 1.212751] CPU0
[ 1.212815] ----
[ 1.212871] lock(&dev->lock);
[ 1.212944] lock(&dev->lock);
[ 1.213016]
[ 1.213016] *** DEADLOCK ***
[ 1.213016]
[ 1.213143] May be due to missing lock nesting notation
[ 1.213143]
[ 1.213294] 3 locks held by ip/184:
[ 1.213371] #0: ffffffff838b53e0 (rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x1b/0xa0
[ 1.213543] #1: ffffffff84e5fc70 (&net->rtnl_mutex){+.+.}-{4:4}, at: rtnl_nets_lock+0x37/0xa0
[ 1.213727] #2: ffff8881024a4c30 (&dev->lock){+.+.}-{4:4}, at: dev_open+0x50/0xb0
[ 1.213895]
[ 1.213895] stack backtrace:
[ 1.213991] CPU: 0 UID: 0 PID: 184 Comm: ip Not tainted 6.14.0-rc5-01215-g032756b4ca7a-dirty #5
[ 1.213993] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS Arch Linux 1.16.3-1-1 04/01/2014
[ 1.213994] Call Trace:
[ 1.213995] <TASK>
[ 1.213996] dump_stack_lvl+0x8e/0xd0
[ 1.214000] print_deadlock_bug+0x28b/0x2a0
[ 1.214020] lock_acquire+0xea/0x2a0
[ 1.214027] __mutex_lock+0xbf/0xd40
[ 1.214038] dev_set_allmulti+0x4e/0xb0 # real_dev->flags & IFF_ALLMULTI
[ 1.214040] vlan_dev_open+0xa5/0x170 # ndo_open on vlandev
[ 1.214042] __dev_open+0x145/0x270
[ 1.214046] __dev_change_flags+0xb0/0x1e0
[ 1.214051] netif_change_flags+0x22/0x60 # IFF_UP vlandev
[ 1.214053] dev_change_flags+0x61/0xb0 # for each device in group from dev->vlan_info
[ 1.214055] vlan_device_event+0x766/0x7c0 # on netdevsim0
[ 1.214058] notifier_call_chain+0x78/0x120
[ 1.214062] netif_open+0x6d/0x90
[ 1.214064] dev_open+0x5b/0xb0 # locks netdevsim0
[ 1.214066] bond_enslave+0x64c/0x1230
[ 1.214075] do_set_master+0x175/0x1e0 # on netdevsim0
[ 1.214077] do_setlink+0x516/0x13b0
[ 1.214094] rtnl_newlink+0xaba/0xb80
[ 1.214132] rtnetlink_rcv_msg+0x440/0x490
[ 1.214144] netlink_rcv_skb+0xeb/0x120
[ 1.214150] netlink_unicast+0x1f9/0x320
[ 1.214153] netlink_sendmsg+0x346/0x3f0
[ 1.214157] __sock_sendmsg+0x86/0xb0
[ 1.214160] ____sys_sendmsg+0x1c8/0x220
[ 1.214164] ___sys_sendmsg+0x28f/0x2d0
[ 1.214179] __x64_sys_sendmsg+0xef/0x140
[ 1.214184] do_syscall_64+0xec/0x1d0
[ 1.214190] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 1.214191] RIP: 0033:0x7f2d1b4a7e56
Device setup:
netdevsim0 (down)
^ ^
bond netdevsim1.100@netdevsim1 allmulticast=on (down)
When we enslave the lower device (netdevsim0) which has a vlan, we
propagate vlan's allmuti/promisc flags during ndo_open. This causes
(re)locking on of the real_dev.
Propagate allmulti/promisc on flags change, not on the open. There
is a slight semantics change that vlans that are down now propagate
the flags, but this seems unlikely to result in the real issues.
Reproducer:
echo 0 1 > /sys/bus/netdevsim/new_device
dev_path=$(ls -d /sys/bus/netdevsim/devices/netdevsim0/net/*)
dev=$(echo $dev_path | rev | cut -d/ -f1 | rev)
ip link set dev $dev name netdevsim0
ip link set dev netdevsim0 up
ip link add link netdevsim0 name netdevsim0.100 type vlan id 100
ip link set dev netdevsim0.100 allmulticast on down
ip link add name bond1 type bond mode 802.3ad
ip link set dev netdevsim0 down
ip link set dev netdevsim0 master bond1
ip link set dev bond1 up
ip link show
Reported-by: syzbot+b0c03d76056ef6cd12a6@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/netdev/Z9CfXjLMKn6VLG5d@mini-arch/T/#m15ba130f53227c883e79fb969687d69d670337a0
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250313100657.2287455-1-sdf@fomichev.me
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
1. predict the file was found
2. explicitly compare the ref to "one", ignoring the dead zone
The latter arguably improves the behavior to begin with. Suppose the
count turned bad -- the previously used ref routine is going to check
for it and return 0, indicating the count does not necessitate taking
->f_pos_lock. But there very well may be several users.
i.e. not paying for special-casing the dead zone improves semantics.
While here spell out each condition in a dedicated if statement. This
has no effect on generated code.
Sizes are as follows (in bytes; gcc 13, x86-64):
stock: 321
likely(): 298
likely()+ref: 280
Signed-off-by: Mateusz Guzik <mjguzik@gmail.com>
Link: https://lore.kernel.org/r/20250319215801.1870660-1-mjguzik@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Add GPIO interrupt controller device.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250311-irqchip-gpio-a4-a5-v5-4-ca4cc276c18c@amlogic.com
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
Add GPIO interrupt controller device.
Signed-off-by: Xianwei Zhao <xianwei.zhao@amlogic.com>
Link: https://lore.kernel.org/r/20250311-irqchip-gpio-a4-a5-v5-3-ca4cc276c18c@amlogic.com
[narmstrong: fix commit to apply without pinctrl node]
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
|
|
'rockchip', 's390', 'core', 'intel/vt-d' and 'amd/amd-vi' into next
|
|
We have recently seen report of lockdep circular lock dependency warnings
on platforms like Skylake and Kabylake:
======================================================
WARNING: possible circular locking dependency detected
6.14.0-rc6-CI_DRM_16276-gca2c04fe76e8+ #1 Not tainted
------------------------------------------------------
swapper/0/1 is trying to acquire lock:
ffffffff8360ee48 (iommu_probe_device_lock){+.+.}-{3:3},
at: iommu_probe_device+0x1d/0x70
but task is already holding lock:
ffff888102c7efa8 (&device->physical_node_lock){+.+.}-{3:3},
at: intel_iommu_init+0xe75/0x11f0
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #6 (&device->physical_node_lock){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
intel_iommu_init+0xe75/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #5 (dmar_global_lock){++++}-{3:3}:
down_read+0x43/0x1d0
enable_drhd_fault_handling+0x21/0x110
cpuhp_invoke_callback+0x4c6/0x870
cpuhp_issue_call+0xbf/0x1f0
__cpuhp_setup_state_cpuslocked+0x111/0x320
__cpuhp_setup_state+0xb0/0x220
irq_remap_enable_fault_handling+0x3f/0xa0
apic_intr_mode_init+0x5c/0x110
x86_late_time_init+0x24/0x40
start_kernel+0x895/0xbd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xbf/0x110
common_startup_64+0x13e/0x141
-> #4 (cpuhp_state_mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
__cpuhp_setup_state_cpuslocked+0x67/0x320
__cpuhp_setup_state+0xb0/0x220
page_alloc_init_cpuhp+0x2d/0x60
mm_core_init+0x18/0x2c0
start_kernel+0x576/0xbd0
x86_64_start_reservations+0x18/0x30
x86_64_start_kernel+0xbf/0x110
common_startup_64+0x13e/0x141
-> #3 (cpu_hotplug_lock){++++}-{0:0}:
__cpuhp_state_add_instance+0x4f/0x220
iova_domain_init_rcaches+0x214/0x280
iommu_setup_dma_ops+0x1a4/0x710
iommu_device_register+0x17d/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #2 (&domain->iova_cookie->mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
iommu_setup_dma_ops+0x16b/0x710
iommu_device_register+0x17d/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #1 (&group->mutex){+.+.}-{3:3}:
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
__iommu_probe_device+0x24c/0x4e0
probe_iommu_group+0x2b/0x50
bus_for_each_dev+0x7d/0xe0
iommu_device_register+0xe1/0x260
intel_iommu_init+0xda4/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
-> #0 (iommu_probe_device_lock){+.+.}-{3:3}:
__lock_acquire+0x1637/0x2810
lock_acquire+0xc9/0x300
__mutex_lock+0xb4/0xe40
mutex_lock_nested+0x1b/0x30
iommu_probe_device+0x1d/0x70
intel_iommu_init+0xe90/0x11f0
pci_iommu_init+0x13/0x70
do_one_initcall+0x62/0x3f0
kernel_init_freeable+0x3da/0x6a0
kernel_init+0x1b/0x200
ret_from_fork+0x44/0x70
ret_from_fork_asm+0x1a/0x30
other info that might help us debug this:
Chain exists of:
iommu_probe_device_lock --> dmar_global_lock -->
&device->physical_node_lock
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(&device->physical_node_lock);
lock(dmar_global_lock);
lock(&device->physical_node_lock);
lock(iommu_probe_device_lock);
*** DEADLOCK ***
This driver uses a global lock to protect the list of enumerated DMA
remapping units. It is necessary due to the driver's support for dynamic
addition and removal of remapping units at runtime.
Two distinct code paths require iteration over this remapping unit list:
- Device registration and probing: the driver iterates the list to
register each remapping unit with the upper layer IOMMU framework
and subsequently probe the devices managed by that unit.
- Global configuration: Upper layer components may also iterate the list
to apply configuration changes.
The lock acquisition order between these two code paths was reversed. This
caused lockdep warnings, indicating a risk of deadlock. Fix this warning
by releasing the global lock before invoking upper layer interfaces for
device registration.
Fixes: b150654f74bf ("iommu/vt-d: Fix suspicious RCU usage")
Closes: https://lore.kernel.org/linux-iommu/SJ1PR11MB612953431F94F18C954C4A9CB9D32@SJ1PR11MB6129.namprd11.prod.outlook.com/
Tested-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Link: https://lore.kernel.org/r/20250317035714.1041549-1-baolu.lu@linux.intel.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Don't overwrite an IRTE that is posting IRQs to a vCPU with a posted MSI
entry if the host IRQ affinity happens to change. If/when the IRTE is
reverted back to "host mode", it will be reconfigured as a posted MSI or
remapped entry as appropriate.
Drop the "mode" field, which doesn't differentiate between posted MSIs and
posted vCPUs, in favor of a dedicated posted_vcpu flag. Note! The two
posted_{msi,vcpu} flags are intentionally not mutually exclusive; an IRTE
can transition between posted MSI and posted vCPU.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250315025135.2365846-3-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Add a helper to take care of reconfiguring an IRTE to deliver IRQs to the
host, i.e. not to a vCPU, and use the helper when an IRTE's vCPU affinity
is nullified, i.e. when KVM puts an IRTE back into "host" mode. Because
posted MSIs use an ephemeral IRTE, using modify_irte() puts the IRTE into
full remapped mode, i.e. unintentionally disables posted MSIs on the IRQ.
Fixes: ed1e48ea4370 ("iommu/vt-d: Enable posted mode for device MSIs")
Cc: stable@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Jacob Pan <jacob.jun.pan@linux.intel.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/r/20250315025135.2365846-2-seanjc@google.com
Signed-off-by: Lu Baolu <baolu.lu@linux.intel.com>
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
If kzalloc() fails, accessing cfg->supports_bypass causes a null pointer dereference.
Fix by checking for NULL immediately after allocation and returning -ENOMEM.
Fixes: 3bc0102835f6 ("iommu: apple-dart: Allow mismatched bypass support")
Signed-off-by: Qasim Ijaz <qasdev00@gmail.com>
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Link: https://lore.kernel.org/r/20250314230102.11008-1-qasdev00@gmail.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
The global dma_dev trick was mostly because the old domain_alloc op
provided no context, so no way to know which IOMMU was to own the
pagetable, or if a suitable one even existed at all. In the new
multi-instance world with domain_alloc_paging this is no longer a
concern - now we know that the given device must be associated with a
valid IOMMU instance which provided the op to call in the first place,
and therefore that instance can and should be the pagetable owner. To
avoid worrying about the lifetime and stability of the rk_domain->iommus
list, and keep the lookups simple and efficient, we'll still stash a
dma_dev pointer, but now it's accurately per-domain.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/25dc948a7d35c8142c5719ac22bc523f8524d006.1741886382.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Currently Rockchip calls iommu_device_register() before it's finished
setting up the hardware and driver state, and as such it now gets
unhappy in various ways when registration starts working the way it was
always intended to, and probing client devices straight away. Reorder
the operations to ensure that what we're registering is a prepared and
functional IOMMU instance.
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/e69532f00bf49d98322b96788edb7e2e305e4006.1741886382.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Now that DT-based probing is finally happening in the right order again,
it reveals an issue in Rockchip's of_xlate, which can now be called
during registration, but is using the global dma_dev which is only
assigned later. However, this makes little sense when we're already
looking up the correct IOMMU device, who should logically be the owner
of the devm allocation anyway.
Reported-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Marek Szyprowski <m.szyprowski@samsung.com>
Tested-by: Anders Roxell <anders.roxell@linaro.org>
Fixes: bcb81ac6ae3c ("iommu: Get DT/ACPI parsing into the proper probe path")
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Tested-by: Quentin Schulz <quentin.schulz@cherry.de>
Tested-by: Dang Huynh <danct12@riseup.net>
Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/771e91cf16b3048e93f657153b76905665878fa2.1741886382.git.robin.murphy@arm.com
Signed-off-by: Joerg Roedel <jroedel@suse.de>
|
|
Jacob Keller says:
====================
net: ptp: fix egregious supported flag checks
In preparation for adding .supported_extts_flags and
.supported_perout_flags to the ptp_clock_info structure, fix a couple of
places where drivers get existing flag gets grossly incorrect.
The igb driver claims 82580 supports strictly validating PTP_RISING_EDGE
and PTP_FALLING_EDGE, but doesn't actually check the flags. Fix the driver
to require that the request match both edges, as this is implied by the
datasheet description.
The renesas driver also claims to support strict flag checking, but does
not actually check the flags either. I do not have the data sheet for this
device, so I do not know what edge it timestamps. For simplicity, just
reject all requests with PTP_STRICT_FLAGS. This essentially prevents the
PTP_EXTTS_REQUEST2 ioctl from working. Updating to correctly validate the
flags will require someone who has the hardware to confirm the behavior.
The lan743x driver supports (and strictly validates) that the request is
either PTP_RISING_EDGE or PTP_FALLING_EDGE but not both. However, it does
not check the flags are one of the known valid flags. Thus, requests for
PTP_EXT_OFF (and any future flag) will be accepted and misinterpreted. Add
the appropriate check to reject unsupported PTP_EXT_OFF requests and future
proof against new flags.
The broadcom PHY driver checks that PTP_PEROUT_PHASE is not set. This
appears to be an attempt at rejecting unsupported flags. It is not robust
against flag additions such as the PTP_PEROUT_ONE_SHOT, or anything added
in the future. Fix this by instead checking against the negation of the
supported PTP_PEROUT_DUTY_CYCLE instead.
The ptp_ocp driver supports PTP_PEROUT_PHASE and PTP_PEROUT_DUTY_CYCLE, but
does not check unsupported flags. Add the appropriate check to ensure
PTP_PEROUT_ONE_SHOT and any future flags are rejected as unsupported.
These are changes compile-tested, but I do not have hardware to validate the
behavior.
There are a number of other drivers which enable periodic output or
external timestamp requests, but which do not check flags at all. We could
go through each of these drivers one-by-one and meticulously add a flag
check. Instead, these drivers will be covered only by the upcoming
.supported_extts_flags and .supported_perout_flags checks in a net-next
series.
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
====================
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-0-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ptp_ocp_signal_from_perout() function supports PTP_PEROUT_DUTY_CYCLE
and PTP_PEROUT_PHASE. It does not support PTP_PEROUT_ONE_SHOT, but does not
reject a request with such an unsupported flag.
Add the appropriate check to ensure that unsupported requests are rejected
both for PTP_PEROUT_ONE_SHOT as well as any future flags.
Fixes: 1aa66a3a135a ("ptp: ocp: Program the signal generators via PTP_CLK_REQ_PEROUT")
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-5-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In bcm_ptp_perout_locked, the driver rejects requests which have
PTP_PEROUT_PHASE set. This appears to be an attempt to reject any
unsupported flags. Unfortunately, this only checks one flag, but does not
protect against PTP_PEROUT_ONE_SHOT, or any future flags which may be
added.
Fix the check to ensure that no flag other than the supported
PTP_PEROUT_DUTY_CYCLE is set.
Fixes: 7bfe91efd525 ("net: phy: Add support for 1PPS out and external timestamps")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-4-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The lan743x_ptp_io_event_cap_en() function checks that the given request
sets only one of PTP_RISING_EDGE or PTP_FALLING_EDGE, but not both.
However, this driver does not check whether other flags (such as
PTP_EXT_OFF) are set, nor whether any future unrecognized flags are set.
Fix this by adding the appropriate check to the lan743x_ptp_io_extts()
function.
Fixes: 60942c397af6 ("net: lan743x: Add support for PTP-IO Event Input External Timestamp (extts)")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-3-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The ravb_ptp_extts() function checks the flags coming from the
PTP_EXTTS_REQUEST ioctl, to ensure that future flags are not accepted on
accident.
This was updated to 'honor' the PTP_STRICT_FLAGS in commit 6138e687c7b6
("ptp: Introduce strict checking of external time stamp options.").
However, the driver does not *actually* validate the flags.
I originally fixed this driver to reject future flags in commit
592025a03b34 ("renesas: reject unsupported external timestamp flags"). It
is still unclear whether this hardware timestamps the rising, falling, or
both edges of the input signal.
Accepting requests with PTP_STRICT_FLAGS is a bug, as this could lead to
users mistakenly assuming a request with PTP_RISING_EDGE actually
timestamps the rising edge only.
Reject requests with PTP_STRICT_FLAGS (and hence all PTP_EXTTS_REQUEST2
requests) until someone with access to the datasheet or hardware knowledge
can confirm the timestamping behavior and update this driver.
Fixes: 6138e687c7b6 ("ptp: Introduce strict checking of external time stamp options.")
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-2-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The igb_ptp_feature_enable_82580 function correctly checks that unknown
flags are not passed to the function. However, it does not actually check
PTP_RISING_EDGE or PTP_FALLING_EDGE when configuring the external timestamp
function.
The data sheet for the 82580 product says:
Upon a change in the input level of one of the SDP pins that was
configured to detect Time stamp events using the TSSDP register, a time
stamp of the system time is captured into one of the two auxiliary time
stamp registers (AUXSTMPL/H0 or AUXSTMPL/H1).
For example to define timestamping of events in the AUXSTMPL0 and
AUXSTMPH0 registers, Software should:
1. Set the TSSDP.AUX0_SDP_SEL field to select the SDP pin that detects
the level change and set the TSSDP.AUX0_TS_SDP_EN bit to 1.
2. Set the TSAUXC.EN_TS0 bit to 1 to enable timestamping
The same paragraph is in the i350 and i354 data sheets.
The wording implies that the time stamps are captured at any level change.
There does not appear to be any way to only timestamp one edge of the
signal.
Reject requests which do not set both PTP_RISING_EDGE and PTP_FALLING_EDGE
when operating under PTP_STRICT_FLAGS mode via PTP_EXTTS_REQUEST2.
Fixes: 38970eac41db ("igb: support EXTTS on 82580/i354/i350")
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250312-jk-net-fixes-supported-extts-flags-v2-1-ea930ba82459@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Gerhard Engleder says:
====================
Support loopback mode speed selection
Previously to commit 6ff3cddc365b ("net: phylib: do not disable autoneg
for fixed speeds >= 1G") it was possible to select the speed of the
loopback mode by configuring a fixed speed before enabling the loopback
mode. Now autoneg is always enabled for >= 1G and a fixed speed of >= 1G
requires successful autoneg. Thus, the speed of the loopback mode depends
on the link partner for >= 1G. There is no technical reason to depend on
the link partner for loopback mode. With this behavior the loopback mode
is less useful for testing.
Allow PHYs to support optional speed selection for the loopback mode.
This support is implemented for the generic loopback support and for PHY
drivers, which obviously support speed selection for loopback mode.
Additionally, loopback support according to the data sheet is added to
the KSZ9031 PHY.
Extend phy_loopback() to signal link up and down if speed changes,
because a new link speed requires link up signalling.
Use this loopback speed selection in the tsnep driver to select the
loopback mode speed depending the previously active speed. User space
tests with 100 Mbps and 1 Gbps loopback are possible again.
====================
Link: https://patch.msgid.link/20250312203010.47429-1-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use 100 Mbps only if the PHY is configured to this speed. Otherwise use
always the maximum speed of 1000 Mbps.
Also remove explicit setting of carrier on and link mode after loopback.
This is not needed anymore, because phy_loopback() with selected speed
signals the link and the speed to the MAC.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-6-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Use genphy_loopback() to disable loopback like ksz9031_set_loopback().
This way disable loopback is implemented only once within
genphy_loopback() and the set_loopback() implementations look similar.
Also fix comment about msleep() in the out-of loopback case which is not
executed in the out-of loopback case.
Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-5-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The KSZ9031 PHYs requires full duplex for loopback mode. Add PHY
specific set_loopback() to ensure this.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250312203010.47429-4-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
phy_loopback() leaves it to the PHY driver to select the speed of the
loopback mode. Thus, the speed of the loopback mode depends on the PHY
driver in use.
Add support for speed selection to phy_loopback() to enable loopback
with defined speeds. Ensure that link up is signaled if speed changes
as speed is not allowed to change during link up. Link down and up is
necessary for a new speed.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Link: https://patch.msgid.link/20250312203010.47429-3-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
PHY drivers support loopback mode, but it is not possible to select the
speed of the loopback mode. The speed is chosen by the set_loopback()
operation of the PHY driver. Same is valid for genphy_loopback().
There are PHYs that support loopback with different speeds. Extend
set_loopback() to make loopback speed selection possible.
Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250312203010.47429-2-gerhard@engleder-embedded.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The comments for EXT_SVADE are a bit confusing. Clarify it.
Signed-off-by: Chao Du <duchao@eswincomputing.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Link: https://lore.kernel.org/r/20250221025929.31678-1-duchao@eswincomputing.com
Signed-off-by: Anup Patel <anup@brainfault.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt into soc/dt
Minor improvements inDTS for v6.15
1. ARM Cirrus EP7211: Align GPIO node name to match what bindings
expect.
2. Loongson 2K1000: Drop incorrect spidev description, by pretending to
have there something else. This will have impact on the users of
DTS, because spidev will stop working, however no counter-proposals
of fixing this or even explaining this were proposed for half a year
after the patch was posted. Therefore drop incorrect hardware
description, hoping affected users will come if proper one, if needed.
* tag 'dt-cleanup-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux-dt:
loongarch: dts: remove non-existent DAC from 2k1000-ref
ARM: dts: cirrus: ep7211: Align GPIO hog name with bindings
Link: https://lore.kernel.org/r/20250316144221.18240-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
ARM: tegra: Device tree changes for v6.15-rc1
This contains a few patches that add some missing, display-related nodes
on Tegra114 and Tegra124, as well as a small fix in the display clock
used for DSI on Tegra114 and the addition of a light sensor found on the
ASUS TF101.
* tag 'tegra-for-6.15-arm-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tf101: Add al3000a illuminance sensor node
ARM: tegra: Add DSI-A and DSI-B nodes on Tegra124
ARM: tegra: Add HDA node on Tegra114
ARM: tegra: Add ARM PMU node on Tegra114
ARM: tegra: Switch DSI-B clock parent to PLLD on Tegra114
Link: https://lore.kernel.org/r/20250307162332.3451523-4-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Since the i and pool->chunk_size variables are of type 'u32',
their product can wrap around and then be cast to 'u64'.
This can lead to two different XDP buffers pointing to the same
memory area.
Found by InfoTeCS on behalf of Linux Verification Center
(linuxtesting.org) with SVACE.
Fixes: 94033cd8e73b ("xsk: Optimize for aligned case")
Cc: stable@vger.kernel.org
Signed-off-by: Ilia Gavrilov <Ilia.Gavrilov@infotecs.ru>
Link: https://patch.msgid.link/20250313085007.3116044-1-Ilia.Gavrilov@infotecs.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
