| Age | Commit message (Collapse) | Author |
|---|
|
Add write_begin_get_folio() to simplify the common folio lookup logic
used by filesystem ->write_begin() implementations.
This helper wraps __filemap_get_folio() with common flags such as
FGP_WRITEBEGIN, conditional FGP_DONTCACHE, and set folio order based
on the write length.
Part of a series refactoring address_space_operations write_begin and
write_end callbacks to use struct kiocb for passing write context and
flags.
Signed-off-by: Taotao Chen <chentaotao@didiglobal.com>
Link: https://lore.kernel.org/20250716093559.217344-5-chentaotao@didiglobal.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Change the address_space_operations callbacks write_begin() and
write_end() to take struct kiocb * as the first argument instead of
struct file *.
Update all affected function prototypes, implementations, call sites,
and related documentation across VFS, filesystems, and block layer.
Part of a series refactoring address_space_operations write_begin and
write_end callbacks to use struct kiocb for passing write context and
flags.
Signed-off-by: Taotao Chen <chentaotao@didiglobal.com>
Link: https://lore.kernel.org/20250716093559.217344-4-chentaotao@didiglobal.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Refactors shmem_pwrite() to replace the ->write_begin/end logic
with a write_iter-based implementation using kiocb and iov_iter.
While kernel_write() was considered, it caused about 50% performance
regression. vfs_write() is not exported for kernel use. Therefore,
file->f_op->write_iter() is called directly with a synchronously
initialized kiocb to preserve performance and remove write_begin
usage.
Performance results use gem_pwrite on Intel CPU i7-10700
(average of 10 runs):
- ./gem_pwrite --run-subtest bench -s 16384
Before: 0.205s, After: 0.214s
- ./gem_pwrite --run-subtest bench -s 524288
Before: 6.1021s, After: 4.8047s
Part of a series refactoring address_space_operations write_begin and
write_end callbacks to use struct kiocb for passing write context and
flags.
Signed-off-by: Taotao Chen <chentaotao@didiglobal.com>
Link: https://lore.kernel.org/20250716093559.217344-3-chentaotao@didiglobal.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Replace the write_begin/write_end loop in
i915_gem_object_create_shmem_from_data() with call to kernel_write().
This function initializes shmem-backed GEM objects. kernel_write()
simplifies the code by removing manual folio handling.
Part of a series refactoring address_space_operations write_begin and
write_end callbacks to use struct kiocb for passing write context and
flags.
Signed-off-by: Taotao Chen <chentaotao@didiglobal.com>
Link: https://lore.kernel.org/20250716093559.217344-2-chentaotao@didiglobal.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Ensure that epoll instances can never form a graph deeper than
EP_MAX_NESTS+1 links.
Currently, ep_loop_check_proc() ensures that the graph is loop-free and
does some recursion depth checks, but those recursion depth checks don't
limit the depth of the resulting tree for two reasons:
- They don't look upwards in the tree.
- If there are multiple downwards paths of different lengths, only one of
the paths is actually considered for the depth check since commit
28d82dc1c4ed ("epoll: limit paths").
Essentially, the current recursion depth check in ep_loop_check_proc() just
serves to prevent it from recursing too deeply while checking for loops.
A more thorough check is done in reverse_path_check() after the new graph
edge has already been created; this checks, among other things, that no
paths going upwards from any non-epoll file with a length of more than 5
edges exist. However, this check does not apply to non-epoll files.
As a result, it is possible to recurse to a depth of at least roughly 500,
tested on v6.15. (I am unsure if deeper recursion is possible; and this may
have changed with commit 8c44dac8add7 ("eventpoll: Fix priority inversion
problem").)
To fix it:
1. In ep_loop_check_proc(), note the subtree depth of each visited node,
and use subtree depths for the total depth calculation even when a subtree
has already been visited.
2. Add ep_get_upwards_depth_proc() for similarly determining the maximum
depth of an upwards walk.
3. In ep_loop_check(), use these values to limit the total path length
between epoll nodes to EP_MAX_NESTS edges.
Fixes: 22bacca48a17 ("epoll: prevent creating circular epoll structures")
Cc: stable@vger.kernel.org
Signed-off-by: Jann Horn <jannh@google.com>
Link: https://lore.kernel.org/20250711-epoll-recursion-fix-v1-1-fb2457c33292@google.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
evict_inodes() uses list_for_each_entry_safe() to iterate sb->s_inodes
list. However, since we use i_lru list entry for our local temporary
list of inodes to destroy, the inode is guaranteed to stay in
sb->s_inodes list while we hold sb->s_inode_list_lock. So there is no
real need for safe iteration variant and we can use
list_for_each_entry() just fine.
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/20250709090635.26319-2-jack@suse.cz
Reviewed-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Since [1], it is possible for filesystems to have blocksize > PAGE_SIZE
of the system.
Remove the assumption and make the check generic for all blocksizes in
generic_check_addressable().
[1] https://lore.kernel.org/linux-xfs/20240822135018.1931258-1-kernel@pankajraghav.com/
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/20250630104018.213985-1-p.raghav@samsung.com
Reviewed-by: Zhang Yi <yi.zhang@huawei.com>
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
All filesystems will already check the max and min value of their block
size during their initialization. __getblk_slow() is a very low-level
function to have these checks. Remove them and only check for logical
block size alignment.
As this check with logical block size alignment might never trigger, add
WARN_ON_ONCE() to the check. As WARN_ON_ONCE() will already print the
stack, remove the call to dump_stack().
Suggested-by: Matthew Wilcox <willy@infradead.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/20250626113223.181399-1-p.raghav@samsung.com
Reviewed-by: Baokun Li <libaokun1@huawei.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When sysctl_nr_open is set to a very high value (for example, 1073741816
as set by systemd), processes attempting to use file descriptors near
the limit can trigger massive memory allocation attempts that exceed
INT_MAX, resulting in a WARNING in mm/slub.c:
WARNING: CPU: 0 PID: 44 at mm/slub.c:5027 __kvmalloc_node_noprof+0x21a/0x288
This happens because kvmalloc_array() and kvmalloc() check if the
requested size exceeds INT_MAX and emit a warning when the allocation is
not flagged with __GFP_NOWARN.
Specifically, when nr_open is set to 1073741816 (0x3ffffff8) and a
process calls dup2(oldfd, 1073741880), the kernel attempts to allocate:
- File descriptor array: 1073741880 * 8 bytes = 8,589,935,040 bytes
- Multiple bitmaps: ~400MB
- Total allocation size: > 8GB (exceeding INT_MAX = 2,147,483,647)
Reproducer:
1. Set /proc/sys/fs/nr_open to 1073741816:
# echo 1073741816 > /proc/sys/fs/nr_open
2. Run a program that uses a high file descriptor:
#include <unistd.h>
#include <sys/resource.h>
int main() {
struct rlimit rlim = {1073741824, 1073741824};
setrlimit(RLIMIT_NOFILE, &rlim);
dup2(2, 1073741880); // Triggers the warning
return 0;
}
3. Observe WARNING in dmesg at mm/slub.c:5027
systemd commit a8b627a introduced automatic bumping of fs.nr_open to the
maximum possible value. The rationale was that systems with memory
control groups (memcg) no longer need separate file descriptor limits
since memory is properly accounted. However, this change overlooked
that:
1. The kernel's allocation functions still enforce INT_MAX as a maximum
size regardless of memcg accounting
2. Programs and tests that legitimately test file descriptor limits can
inadvertently trigger massive allocations
3. The resulting allocations (>8GB) are impractical and will always fail
systemd's algorithm starts with INT_MAX and keeps halving the value
until the kernel accepts it. On most systems, this results in nr_open
being set to 1073741816 (0x3ffffff8), which is just under 1GB of file
descriptors.
While processes rarely use file descriptors near this limit in normal
operation, certain selftests (like
tools/testing/selftests/core/unshare_test.c) and programs that test file
descriptor limits can trigger this issue.
Fix this by adding a check in alloc_fdtable() to ensure the requested
allocation size does not exceed INT_MAX. This causes the operation to
fail with -EMFILE instead of triggering a kernel warning and avoids the
impractical >8GB memory allocation request.
Fixes: 9cfe015aa424 ("get rid of NR_OPEN and introduce a sysctl_nr_open")
Cc: stable@vger.kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
Link: https://lore.kernel.org/20250629074021.1038845-1-sashal@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
block_write_end() looks like it can be used as a ->write_end()
implementation. However, it can't as it does not unlock nor put
the folio. Since it does not use the 'file', 'mapping' nor 'fsdata'
arguments, remove them.
Signed-off-by: "Matthew Wilcox (Oracle)" <willy@infradead.org>
Link: https://lore.kernel.org/20250624132130.1590285-1-willy@infradead.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Use sysfs_emit() instead of snprintf() in version_show() function to
follow the preferred kernel API.
Signed-off-by: Ankit Chauhan <ankitchauhan2065@gmail.com>
Link: https://lore.kernel.org/20250619031536.19352-1-ankitchauhan2065@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
When running almost any select()/poll() workload intense enough,
KCSAN is likely to report data races around using 'triggered' flag
of 'struct poll_wqueues'. For example, running 'find /' on a tty
console may trigger the following:
BUG: KCSAN: data-race in poll_schedule_timeout / pollwake
write to 0xffffc900030cfb90 of 4 bytes by task 97 on cpu 5:
pollwake+0xd1/0x130
__wake_up_common_lock+0x7f/0xd0
n_tty_receive_buf_common+0x776/0xc30
n_tty_receive_buf2+0x3d/0x60
tty_ldisc_receive_buf+0x6b/0x100
tty_port_default_receive_buf+0x63/0xa0
flush_to_ldisc+0x169/0x3c0
process_scheduled_works+0x6fe/0xf40
worker_thread+0x53b/0x7b0
kthread+0x4f8/0x590
ret_from_fork+0x28c/0x450
ret_from_fork_asm+0x1a/0x30
read to 0xffffc900030cfb90 of 4 bytes by task 5802 on cpu 4:
poll_schedule_timeout+0x96/0x160
do_sys_poll+0x966/0xb30
__se_sys_ppoll+0x1c3/0x210
__x64_sys_ppoll+0x71/0x90
x64_sys_call+0x3079/0x32b0
do_syscall_64+0xfa/0x3b0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
According to Jan, "there's no practical issue here because it is hard
to imagine how the compiler could compile the above code using some
intermediate values stored into 'triggered' or multiple fetches from
'triggered'". Nevertheless, silence KCSAN by using WRITE_ONCE() in
__pollwake() and READ_ONCE() in poll_schedule_timeout(), respectively.
Link: https://lore.kernel.org/linux-fsdevel/bwx72orsztfjx6aoftzzkl7wle3hi4syvusuwc7x36nw6t235e@bjwrosehblty
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Link: https://lore.kernel.org/20250620063059.1800689-1-dmantipov@yandex.ru
Acked-by: Marco Elver <elver@google.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
VFS has switched to i_rwsem for ten years now (9902af79c01a: parallel
lookups actual switch to rwsem), but the VFS documentation and comments
still has references to i_mutex.
Signed-off-by: Junxuan Liao <ljx@cs.wisc.edu>
Link: https://lore.kernel.org/72223729-5471-474a-af3c-f366691fba82@cs.wisc.edu
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Commit e1defc4ff0cf ("block: Do away with the notion of hardsect_size")
changed hardsect_size to logical block size. The comment on top still
says hardsect_size.
Remove the comment as the code is pretty clear. While we are at it,
format the relevant code.
Reviewed-by: "Martin K. Petersen" <martin.petersen@oracle.com>
Signed-off-by: Pankaj Raghav <p.raghav@samsung.com>
Link: https://lore.kernel.org/20250618075821.111459-1-p.raghav@samsung.com
Reviewed-by: Daniel Gomez <da.gomez@samsung.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
The macro takes a parameter called "p" but references "fc" internally.
This happens to compile as long as callers pass a variable named fc,
but breaks otherwise. Rename the first parameter to “fc” to match the
usage and to be consistent with warnfc() / errorfc().
Fixes: a3ff937b33d9 ("prefix-handling analogues of errorf() and friends")
Signed-off-by: RubenKelevra <rubenkelevra@gmail.com>
Link: https://lore.kernel.org/20250617230927.1790401-1-rubenkelevra@gmail.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
all users of 'struct renamedata' have the dentry for the old and new
directories, and often have no use for the inode except to store it in
the renamedata.
This patch changes struct renamedata to hold the dentry, rather than
the inode, for the old and new directories, and changes callers to
match. The names are also changed from a _dir suffix to _parent. This
is consistent with other usage in namei.c and elsewhere.
This results in the removal of several local variables and several
dereferences of ->d_inode at the cost of adding ->d_inode dereferences
to vfs_rename().
Acked-by: Miklos Szeredi <miklos@szeredi.hu>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: NeilBrown <neil@brown.name>
Link: https://lore.kernel.org/174977089072.608730.4244531834577097454@noble.neil.brown.name
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
that thing is callable only as ->i_op->getattr() instance and only
for directory inodes (/proc/*/fd and /proc/*/task/*/fd)
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/20250615003321.GC3011112@ZenIV
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Link: https://lore.kernel.org/20250615003216.GB3011112@ZenIV
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Currently the function that does this takes a struct file_lock, but
__locks_wake_up_blocks() deals with both locks and leases. Currently
this works because both file_lock and file_lease have the file_lock_core
at the beginning of the struct, but it's fragile to rely on that.
Add a new locks_wake_up_waiter() function and call that from
__locks_wake_up_blocks().
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Link: https://lore.kernel.org/20250602-filelock-6-16-v1-1-7da5b2c930fd@kernel.org
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
Rather than have the caller set the FMODE_NOWAIT flags for both output
files, move it to create_pipe_files() where other f_mode flags are set
anyway with stream_open(). With that, both __do_pipe_flags() and
io_pipe() can remove the manual setting of the NOWAIT flags.
No intended functional changes, just a code cleanup.
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Link: https://lore.kernel.org/1f0473f8-69f3-4eb1-aa77-3334c6a71d24@kernel.dk
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
'implemenation' --> 'implementation'.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Link: https://lore.kernel.org/20250530173204.3611576-1-andriy.shevchenko@linux.intel.com
Signed-off-by: Christian Brauner <brauner@kernel.org>
|
|
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux
Pull turbostat updates from Len Brown:
- Add initial DMR support, which required smarter RAPL probe
- Fix AMD MSR RAPL energy reporting
- Add RAPL power limit configuration output
- Minor fixes
* tag 'turbostat-2025.06.08' of git://git.kernel.org/pub/scm/linux/kernel/git/lenb/linux:
tools/power turbostat: version 2025.06.08
tools/power turbostat: Add initial support for BartlettLake
tools/power turbostat: Add initial support for DMR
tools/power turbostat: Dump RAPL sysfs info
tools/power turbostat: Avoid probing the same perf counters
tools/power turbostat: Allow probing RAPL with platform_features->rapl_msrs cleared
tools/power turbostat: Clean up add perf/msr counter logic
tools/power turbostat: Introduce add_msr_counter()
tools/power turbostat: Remove add_msr_perf_counter_()
tools/power turbostat: Remove add_cstate_perf_counter_()
tools/power turbostat: Remove add_rapl_perf_counter_()
tools/power turbostat: Quit early for unsupported RAPL counters
tools/power turbostat: Always check rapl_joules flag
tools/power turbostat: Fix AMD package-energy reporting
tools/power turbostat: Fix RAPL_GFX_ALL typo
tools/power turbostat: Add Android support for MSR device handling
tools/power turbostat.8: pm_domain wording fix
tools/power turbostat.8: fix typo: idle_pct should be pct_idle
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer cleanup from Thomas Gleixner:
"The delayed from_timer() API cleanup:
The renaming to the timer_*() namespace was delayed due massive
conflicts against Linux-next. Now that everything is upstream finish
the conversion"
* tag 'timers-cleanups-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
treewide, timers: Rename from_timer() to timer_container_of()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 fixes from Thomas Gleixner:
"A small set of x86 fixes:
- Cure IO bitmap inconsistencies
A failed fork cleans up all resources of the newly created thread
via exit_thread(). exit_thread() invokes io_bitmap_exit() which
does the IO bitmap cleanups, which unfortunately assume that the
cleanup is related to the current task, which is obviously bogus.
Make it work correctly
- A lockdep fix in the resctrl code removed the clearing of the
command buffer in two places, which keeps stale error messages
around. Bring them back.
- Remove unused trace events"
* tag 'x86-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
fs/resctrl: Restore the rdt_last_cmd_clear() calls after acquiring rdtgroup_mutex
x86/iopl: Cure TIF_IO_BITMAP inconsistencies
x86/fpu: Remove unused trace events
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull timer fix from Thomas Gleixner:
"Add the missing seq_file forward declaration in the timer namespace
header"
* tag 'timers-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timens: Add struct seq_file forward declaration
|
|
Add initial DMR support, which required smarter RAPL probe
Fix AMD MSR RAPL energy reporting
Add RAPL power limit configuration output
Minor fixes
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add initial support for BartlettLake.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Add initial support for DMR.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
for example:
intel-rapl:1: psys 28.0s:100W 976.0us:100W
intel-rapl:0: package-0 28.0s:57W,max:15W 2.4ms:57W
intel-rapl:0/intel-rapl:0:0: core disabled
intel-rapl:0/intel-rapl:0:1: uncore disabled
intel-rapl-mmio:0: package-0 28.0s:28W,max:15W 2.4ms:57W
[lenb: simplified format]
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
squish me
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
For the RAPL package energy status counter, Intel and AMD share the same
perf_subsys and perf_name, but with different MSR addresses.
Both rapl_counter_arch_infos[0] and rapl_counter_arch_infos[1] are
introduced to describe this counter for different Vendors.
As a result, the perf counter is probed twice, and causes a failure in
in get_rapl_counters() because expected_read_size and actual_read_size
don't match.
Fix the problem by skipping the already probed counter.
Note, this is not a perfect fix. For example, if different
vendors/platforms use the same MSR value for different purpose, the code
can be fooled when it probes a rapl_counter_arch_infos[] entry that does
not belong to the running Vendor/Platform.
In a long run, better to put rapl_counter_arch_infos[] into the
platform_features so that this becomes Vendor/Platform specific.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
cleared
platform_features->rapl_msrs describes the RAPL MSRs supported. While
RAPL Perf counters can be exposed from different kernel backend drivers,
e.g. RAPL MSR I/F driver, or RAPL TPMI I/F driver.
Thus, turbostat should first blindly probe all the available RAPL Perf
counters, and falls back to the RAPL MSR counters if they are listed in
platform_features->rapl_msrs.
With this, platforms that don't have RAPL MSRs can clear the
platform_features->rapl_msrs bits and use RAPL Perf counters only.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Increase the code readability by moving the no_perf/no_msr flag and the
cai->perf_name/cai->msr sanity checks into the counter probe functions.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
probe_rapl_msr() is reused for probing RAPL MSR counters, cstate MSR
counters and MPERF/APERF/SMI MSR counters, thus its name is misleading.
Similar to add_perf_counter(), introduce add_msr_counter() to probe a
counter via MSR. Introduce wrapper function add_rapl_msr_counter() at
the same time to add extra check for Zero return value for specified
RAPL counters.
No functional change intended.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
As the only caller of add_msr_perf_counter_(), add_msr_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_msr_perf_counter_() and move all the logic to
add_msr_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
As the only caller of add_cstate_perf_counter_(),
add_cstate_perf_counter() just gives extra debug output on top. There is
no need to keep both functions.
Remove add_cstate_perf_counter_() and move all the logic to
add_cstate_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
As the only caller of add_rapl_perf_counter_(), add_rapl_perf_counter()
just gives extra debug output on top. There is no need to keep both
functions.
Remove add_rapl_perf_counter_() and move all the logic to
add_rapl_perf_counter().
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Quit early for unsupported RAPL counters.
No functional change.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
rapl_joules bit should always be checked even if
platform_features->rapl_msrs is not set or no_msr flag is used.
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
commit 05a2f07db888 ("tools/power turbostat: read RAPL counters via
perf") that adds support to read RAPL counters via perf defines the
notion of a RAPL domain_id which is set to physical_core_id on
platforms which support per_core_rapl counters (Eg: AMD processors
Family 17h onwards) and is set to the physical_package_id on all the
other platforms.
However, the physical_core_id is only unique within a package and on
platforms with multiple packages more than one core can have the same
physical_core_id and thus the same domain_id. (For eg, the first cores
of each package have the physical_core_id = 0). This results in all
these cores with the same physical_core_id using the same entry in the
rapl_counter_info_perdomain[]. Since rapl_perf_init() skips the
perf-initialization for cores whose domain_ids have already been
visited, cores that have the same physical_core_id always read the
perf file corresponding to the physical_core_id of the first package
and thus the package-energy is incorrectly reported to be the same
value for different packages.
Note: This issue only arises when RAPL counters are read via perf and
not when they are read via MSRs since in the latter case the MSRs are
read separately on each core.
Fix this issue by associating each CPU with rapl_core_id which is
unique across all the packages in the system.
Fixes: 05a2f07db888 ("tools/power turbostat: read RAPL counters via perf")
Signed-off-by: Gautham R. Shenoy <gautham.shenoy@amd.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
Fix typo in the currently unused RAPL_GFX_ALL macro definition.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
It uses /dev/msrN device paths on Android instead of /dev/cpu/N/msr,
updates error messages and permission checks to reflect the Android
device path, and wraps platform-specific code with #if defined(ANDROID)
to ensure correct behavior on both Android and non-Android systems.
These changes improve compatibility and usability of turbostat on
Android devices.
Signed-off-by: Kaushlendra Kumar <kaushlendra.kumar@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
turbostat.8: clarify that uncore "domains" are Power Management domains,
aka pm_domains.
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
idle_pct should be pct_idle
Signed-off-by: Len Brown <len.brown@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 perf fix from Thomas Gleixner:
"A single fix for the x86 performance counters on Intel CPUs:
The MSR offset calculations for fixed performance counters are stored
at the wrong index in the configuration array causing the general
purpose counter MSR offset to be overwritten, so both the general
purpose and the fixed counters offsets are incorrect.
Correct the array index calculation to fix that"
* tag 'perf-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel: Fix incorrect MSR index calculations in intel_pmu_config_acr()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull irq fix from Thomas Gleixner:
"A single fix for the PCI/MSI code:
The conversion to per device MSI domains created a MSI domain with
size 1 instead of sizing it to the maximum possible number of MSI
interrupts for the device. This "worked" as the subsequent allocations
resized the domain, but the recent change to move the prepare() call
into the domain creation path broke this works by chance mechanism.
Size the domain properly at creation time"
* tag 'irq-urgent-2025-06-08' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
PCI/MSI: Size device MSI domain with the maximum number of vectors
|
|
Pull mount fixes from Al Viro:
"Various mount-related bugfixes:
- split the do_move_mount() checks in subtree-of-our-ns and
entire-anon cases and adapt detached mount propagation selftest for
mount_setattr
- allow clone_private_mount() for a path on real rootfs
- fix a race in call of has_locked_children()
- fix move_mount propagation graph breakage by MOVE_MOUNT_SET_GROUP
- make sure clone_private_mnt() caller has CAP_SYS_ADMIN in the right
userns
- avoid false negatives in path_overmount()
- don't leak MNT_LOCKED from parent to child in finish_automount()
- do_change_type(): refuse to operate on unmounted/not ours mounts"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
do_change_type(): refuse to operate on unmounted/not ours mounts
clone_private_mnt(): make sure that caller has CAP_SYS_ADMIN in the right userns
selftests/mount_setattr: adapt detached mount propagation test
do_move_mount(): split the checks in subtree-of-our-ns and entire-anon cases
fs: allow clone_private_mount() for a path on real rootfs
fix propagation graph breakage by MOVE_MOUNT_SET_GROUP move_mount(2)
finish_automount(): don't leak MNT_LOCKED from parent to child
path_overmount(): avoid false negatives
fs/fhandle.c: fix a race in call of has_locked_children()
|
|
git://git.samba.org/sfrench/cifs-2.6
Pull more smb client updates from Steve French:
- multichannel/reconnect fixes
- move smbdirect (smb over RDMA) defines to fs/smb/common so they will
be able to be used in the future more broadly, and a documentation
update explaining setting up smbdirect mounts
- update email address for Paulo
* tag '6.16-rc-part2-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
MAINTAINERS, mailmap: Update Paulo Alcantara's email address
cifs: add documentation for smbdirect setup
cifs: do not disable interface polling on failure
cifs: serialize other channels when query server interfaces is pending
cifs: deal with the channel loading lag while picking channels
smb: client: make use of common smbdirect_socket_parameters
smb: smbdirect: introduce smbdirect_socket_parameters
smb: client: make use of common smbdirect_socket
smb: smbdirect: add smbdirect_socket.h
smb: client: make use of common smbdirect.h
smb: smbdirect: add smbdirect.h with public structures
smb: client: make use of common smbdirect_pdu.h
smb: smbdirect: add smbdirect_pdu.h with protocol definitions
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull more tracing fixes from Steven Rostedt:
- Fix regression of waiting a long time on updating trace event filters
When the faultable trace points were added, it needed task trace RCU
synchronization.
This was added to the tracepoint_synchronize_unregister() function.
The filter logic always called this function whenever it updated the
trace event filters before freeing the old filters. This increased
the time of "trace-cmd record" from taking 13 seconds to running over
2 minutes to complete.
Move the freeing of the filters to call_rcu*() logic, which brings
the time back down to 13 seconds.
- Fix ring_buffer_subbuf_order_set() error path lock protection
The error path of the ring_buffer_subbuf_order_set() released the
mutex too early and allowed subsequent accesses to setting the
subbuffer size to corrupt the data and cause a bug.
By moving the mutex locking to the end of the error path, it prevents
the reentrant access to the critical data and also allows the
function to convert the taking of the mutex over to the guard()
logic.
- Remove unused power management clock events
The clock events were added in 2010 for power management. In 2011 arm
used them. In 2013 the code they were used in was removed. These
events have been wasting memory since then.
- Fix sparse warnings
There was a few places that sparse warned about trace_events_filter.c
where file->filter was referenced directly, but it is annotated with
an __rcu tag. Use the helper functions and fix them up to use
rcu_dereference() properly.
* tag 'trace-v6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Add rcu annotation around file->filter accesses
tracing: PM: Remove unused clock events
ring-buffer: Fix buffer locking in ring_buffer_subbuf_order_set()
tracing: Fix regression of filter waiting a long time on RCU synchronization
|
|
Move this API to the canonical timer_*() namespace.
[ tglx: Redone against pre rc1 ]
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/all/aB2X0jCKQO56WdMt@gmail.com
|
