| Age | Commit message (Collapse) | Author |
|---|
|
In GMAC3_X, the timestamping configuration differs from GMAC4 in the
layout of the registers accessed to grab the number of snapshots in FIFO
as well as the register offset to grab the aux snapshot timestamp.
Introduce dedicated ops to configure timestamping on dwmac100 and
dwmac1000. The latency correction doesn't seem to exist on GMAC3, so its
corresponding operation isn't populated.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-6-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The PTP configuration for GMAC3_X differs from the other implementations
in several ways :
- There's only one external snapshot trigger
- The snapshot configuration is done through the PTP_TCR register,
whereas the other dwmac variants have a dedicated ACR (auxiliary
control reg) for that purpose
- The layout for the PTP_TCR register also differs, as bits 24/25 are
used for the snapshot configuration. These bits are reserved on other
variants.
On GMAC3_X, we also can't discover the number of snapshot triggers
automatically.
The GMAC3_X has one PPS output, however it's configuration isn't
supported yet so report 0 n_per_out for now.
Introduce a dedicated set of ptp_clock_info ops and configuration
parameters to reflect these differences specific to GMAC3_X.
This was tested on dwmac_socfpga.
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-5-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Some DWMAC variants such as dwmac1000 don't support discovering the
number of output pps and auxiliary snapshots. Allow these parameters to
be defined in default ptp_clock_info, and let them be updated only when
the feature discovery yielded a result.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-4-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The auxiliary snapshot configuration was found to differ depending on
the dwmac version. To prepare supporting this, allow specifying the
ptp_clock_info ops in the hwif array
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-3-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
The stmmac_ptp_clock_ops are copied into the stmmac_priv structure
before being registered to the PTP core. Some adjustments are made prior
to that, such as the number of snapshots or max adjustment parameters.
Instead of modifying the global definition, then copying into the local
private data, let's first copy then modify the local parameters.
Reviewed-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20241112170658.2388529-2-maxime.chevallier@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Matthieu Baerts says:
====================
mptcp: pm: a few more fixes
Three small fixes related to the MPTCP path-manager:
- Patch 1: correctly reflect the backup flag to the corresponding local
address entry of the userspace path-manager. A fix for v5.19.
- Patch 2: hold the PM lock when deleting an entry from the local
addresses of the userspace path-manager to avoid messing up with this
list. A fix for v5.19.
- Patch 3: use _rcu variant to iterate the in-kernel path-manager's
local addresses list, when under rcu_read_lock(). A fix for v5.17.
====================
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-0-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
In mptcp_pm_create_subflow_or_signal_addr(), rcu_read_(un)lock() are
used as expected to iterate over the list of local addresses, but
list_for_each_entry() was used instead of list_for_each_entry_rcu() in
__lookup_addr(). It is important to use this variant which adds the
required READ_ONCE() (and diagnostic checks if enabled).
Because __lookup_addr() is also used in mptcp_pm_nl_set_flags() where it
is called under the pernet->lock and not rcu_read_lock(), an extra
condition is then passed to help the diagnostic checks making sure
either the associated spin lock or the RCU lock is held.
Fixes: 86e39e04482b ("mptcp: keep track of local endpoint still available for each msk")
Cc: stable@vger.kernel.org
Reviewed-by: Geliang Tang <geliang@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-3-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
When traversing userspace_pm_local_addr_list and deleting an entry from
it in mptcp_pm_nl_remove_doit(), msk->pm.lock should be held.
This patch holds this lock before mptcp_userspace_pm_lookup_addr_by_id()
and releases it after list_move() in mptcp_pm_nl_remove_doit().
Fixes: d9a4594edabf ("mptcp: netlink: Add MPTCP_PM_CMD_REMOVE")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-2-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Just like in-kernel pm, when userspace pm does set_flags, it needs to send
out MP_PRIO signal, and also modify the flags of the corresponding address
entry in the local address list. This patch implements the missing logic.
Traverse all address entries on userspace_pm_local_addr_list to find the
local address entry, if bkup is true, set the flags of this entry with
FLAG_BACKUP, otherwise, clear FLAG_BACKUP.
Fixes: 892f396c8e68 ("mptcp: netlink: issue MP_PRIO signals from userspace PMs")
Cc: stable@vger.kernel.org
Signed-off-by: Geliang Tang <tanggeliang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20241112-net-mptcp-misc-6-12-pm-v1-1-b835580cefa8@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
genphy_c45_ethtool_get_eee
genphy_c45_eee_is_active() populates both bitmaps only if it returns
successfully. So we can avoid the overhead of the temporary bitmaps.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/b0832102-28ab-4223-b879-91fb1fc11278@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Simplify the function.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/f9a4623b-b94c-466c-8733-62057c6d9a17@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Make a minor change to eliminate a static checker warning. The type
of s->ifc is unsigned int, so the correct format specifier should be
%u instead of %d.
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20241113011142.290474-1-luoyifan@cmss.chinamobile.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Jan Stancek says:
====================
tools: ynl: two patches to ease building with rpmbuild
I'm looking to build and package ynl for Fedora and Centos Stream users.
Default rpmbuild has couple hardening options enabled by default [1][2],
which currently prevent ynl from building.
This series contains 2 small patches to address it.
[1] https://fedoraproject.org/wiki/Changes/Harden_All_Packages
[2] https://fedoraproject.org/wiki/Changes/PythonSafePath
====================
Link: https://patch.msgid.link/cover.1731399562.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Package build environments like Fedora rpmbuild introduced hardening
options (e.g. -pie -Wl,-z,now) by passing a -spec option to CFLAGS
and LDFLAGS.
ynl Makefiles currently override CFLAGS but not LDFLAGS, which leads
to a mismatch and build failure:
CC sample devlink
/usr/bin/ld: devlink.o: relocation R_X86_64_32 against symbol `ynl_devlink_family' can not be used when making a PIE object; recompile with -fPIE
/usr/bin/ld: failed to set dynamic section sizes: bad value
collect2: error: ld returned 1 exit status
Extend CFLAGS to support hardening options set by build environment.
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/265b2d5d3a6d4721a161219f081058ed47dc846a.1731399562.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
Python options like PYTHONSAFEPATH or -P [1] do not add script
directory to PYTHONPATH. ynl depends on this path to build and run.
[1] This option is default for Fedora rpmbuild since introduction of
https://fedoraproject.org/wiki/Changes/PythonSafePath
Signed-off-by: Jan Stancek <jstancek@redhat.com>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/b26537cdb6e1b24435b50b2ef81d71f31c630bc1.1731399562.git.jstancek@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next
Kalle Valo says:
====================
wireless-next patches for v6.13
Most likely the last -next pull request for v6.13. Most changes are in
Realtek and Qualcomm drivers, otherwise not really anything
noteworthy.
Major changes:
mac80211
* EHT 1024 aggregation size for transmissions
ath12k
* switch to using wiphy_lock() and remove ar->conf_mutex
* firmware coredump collection support
* add debugfs support for a multitude of statistics
ath11k
* dt: document WCN6855 hardware inputs
ath9k
* remove include/linux/ath9k_platform.h
ath5k
* Arcadyan ARV45XX AR2417 & Gigaset SX76[23] AR241[34]A support
rtw88:
* 8821au and 8812au USB adapters support
rtw89
* thermal protection
* firmware secure boot for WiFi 6 chip
* tag 'wireless-next-2024-11-13' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (154 commits)
Revert "wifi: iwlegacy: do not skip frames with bad FCS"
wifi: mac80211: pass MBSSID config by reference
wifi: mac80211: Support EHT 1024 aggregation size in TX
net: rfkill: gpio: Add check for clk_enable()
wifi: brcmfmac: Fix oops due to NULL pointer dereference in brcmf_sdiod_sglist_rw()
wifi: Switch back to struct platform_driver::remove()
wifi: ipw2x00: libipw_rx_any(): fix bad alignment
wifi: brcmfmac: release 'root' node in all execution paths
wifi: iwlwifi: mvm: don't call power_update_mac in fast suspend
wifi: iwlwifi: s/IWL_MVM_INVALID_STA/IWL_INVALID_STA
wifi: iwlwifi: bump minimum API version in BZ/SC to 92
wifi: iwlwifi: move IWL_LMAC_*_INDEX to fw/api/context.h
wifi: iwlwifi: be less noisy if the NIC is dead in S3
wifi: iwlwifi: mvm: tell iwlmei when we finished suspending
wifi: iwlwifi: allow fast resume on ax200
wifi: iwlwifi: mvm: support new initiator and responder command version
wifi: iwlwifi: mvm: use wiphy locked debugfs for low-latency
wifi: iwlwifi: mvm: MLO scan upon channel condition degradation
wifi: iwlwifi: mvm: support new versions of the wowlan APIs
wifi: iwlwifi: mvm: allow always calling iwl_mvm_get_bss_vif()
...
====================
Link: https://patch.msgid.link/20241113172918.A8A11C4CEC3@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
|
|
eb284f4b3781 drm/nouveau/dp: Honor GSP link training retry timeouts
tried to fix a problem with panel retires, however it appears
the auxch also needs the same treatment, so add the same retry
wrapper around it.
This fixes some eDP panels after a suspend/resume cycle.
Fixes: eb284f4b3781 ("drm/nouveau/dp: Honor GSP link training retry timeouts")
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111034126.2028401-2-airlied@gmail.com
|
|
The upper layer transfer functions expect EBUSY as a return
for when retries should be done.
Fix the AUX error translation, but also check for both errors
in a few places.
Fixes: eb284f4b3781 ("drm/nouveau/dp: Honor GSP link training retry timeouts")
Cc: stable@vger.kernel.org
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241111034126.2028401-1-airlied@gmail.com
|
|
When this code moved to non-coherent allocator the sync was put too
early for some firmwares which called the setup function, move the
sync down after the setup function.
Reported-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Tested-by: Diogo Ivo <diogo.ivo@tecnico.ulisboa.pt>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Fixes: 9b340aeb26d5 ("nouveau/firmware: use dma non-coherent allocator")
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241114004603.3095485-1-airlied@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 SoC updates for v6.13
It contains:
- DT bindings update for the SAM9X7 TCB block
* tag 'at91-soc-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
dt-bindings: microchip: atmel,at91rm9200-tcb: add sam9x7 compatible
Link: https://lore.kernel.org/r/20241113182050.2176500-3-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/dt
Microchip AT91 device tree updates for v6.13
It contains:
- device tree support for the Microchip SAM9X7 SoC and the Microchip
SAM9X75 Curiosity board
- enable power monitor support for SAM9X60-EK, SAMA5D2-ICP,
SAMA7G45 Curiosity, SAMA7G5-EK boards
- updates the uart nodes with missing properties
- device tree cleanups
* tag 'at91-dt-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: microchip: sam9x75_curiosity: add sam9x75 curiosity board
dt-bindings: arm: add sam9x75 curiosity board
ARM: dts: at91: sam9x7: add device tree for SoC
ARM: dts: microchip: Rename LED sub nodes name
ARM: dts: microchip: Rename the pmic node
ARM: dts: microchip: Rename the eeprom nodename
ARM: dts: microchip: sama7g5ek: Add power monitor support
ARM: dts: microchip: sama7g54_curiosity: Add power monitor support
ARM: dts: microchip: sama5d2_icp: Add power monitor support
ARM: dts: microchip: sam9x60ek: Add power monitor support
ARM: dts: microchip: Unify rng node names
ARM: dts: microchip: Add trng labels for all at91 SoCs
ARM: dts: microchip: sam9x60: Add missing property atmel,usart-mode
Link: https://lore.kernel.org/r/20241113182050.2176500-2-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Alexei Starovoitov says:
====================
bpf: range_tree for bpf arena
From: Alexei Starovoitov <ast@kernel.org>
Introduce range_tree (interval tree plus rbtree) to track
unallocated ranges in bpf arena and replace maple_tree with it.
This is a step towards making bpf_arena|free_alloc_pages non-sleepable.
The previous approach to reuse drm_mm to replace maple_tree reached
dead end, since sizeof(struct drm_mm_node) = 168 and
sizeof(struct maple_node) = 256 while
sizeof(struct range_node) = 64 introduced in this patch.
Not only it's smaller, but the algorithm splits and merges
adjacent ranges. Ultimate performance doesn't matter.
The main objective of range_tree is to work in context
where kmalloc/kfree are not safe. It achieves that via bpf_mem_alloc.
====================
Link: https://patch.msgid.link/20241108025616.17625-1-alexei.starovoitov@gmail.com
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
|
|
Add a test that verifies specific behavior of arena range tree
algorithm and adjust existing big_alloc1 test due to use
of global data in arena.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20241108025616.17625-3-alexei.starovoitov@gmail.com
|
|
Introduce range_tree data structure and use it in bpf arena to track
ranges of allocated pages. range_tree is a large bitmap that is
implemented as interval tree plus rbtree. The contiguous sequence of
bits represents unallocated pages.
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Link: https://lore.kernel.org/bpf/20241108025616.17625-2-alexei.starovoitov@gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux into soc/defconfig
Microchip AT91 defconfig updates for v6.13
It contains:
- enable PAC1934 power monitor driver for the Microchip AT91 defconfigs
* tag 'at91-defconfig-6.13' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: configs: at91: enable PAC1934 driver as module
Link: https://lore.kernel.org/r/20241113182050.2176500-1-claudiu.beznea@tuxon.dev
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm
Pull power management fix from Rafael Wysocki:
"Fix a locking issue in the asymmetric CPU capacity setup code in the
intel_pstate driver that may lead to a deadlock if CPU online/offline
runs in parallel with the code in question, which is unlikely but not
impossible (Rafael Wysocki)"
* tag 'pm-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: intel_pstate: Rearrange locking in hybrid_init_cpu_capacity_scaling()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull tpm fixes from Jarkko Sakkinen:
"Two bug fixes for TPM bus encryption (the remaining reported issues in
the feature)"
* tag 'tpmdd-next-6.12-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd:
tpm: Disable TPM on tpm2_create_primary() failure
tpm: Opt-in in disable PCR integrity protection
|
|
seq_printf is costly. For each block device, 19 decimal values are
yielded in /proc/diskstats via seq_printf. On a system with 16 logical
block devices, profiling for open/read/close sequences shows seq_printf
took ~75% samples of diskstats_show:
diskstats_show(92.626% 2269372/2450040)
seq_printf(76.026% 1725313/2269372)
vsnprintf(99.163% 1710866/1725313)
format_decode(26.597% 455040/1710866)
number(19.554% 334542/1710866)
memcpy_orig(4.183% 71570/1710866)
...
srso_return_thunk(0.009% 148/1725313)
part_stat_read_all(8.030% 182236/2269372)
One million rounds of open/read/close /proc/diskstats takes:
real 0m37.687s
user 0m0.264s
sys 0m32.911s
On average, each sequence tooks ~0.032ms
With this patch, most decimal values are yield via seq_put_decimal_ull,
performance is significantly improved:
real 0m20.792s
user 0m0.316s
sys 0m20.463s
On average, each sequence tooks ~0.020ms, a ~37.5% improvement.
Signed-off-by: David Wang <00107082@163.com>
Link: https://lore.kernel.org/r/20241108054500.4251-1-00107082@163.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Cross-merge bpf fixes after downstream PR.
In particular to bring the fix in
commit aa30eb3260b2 ("bpf: Force checkpoint when jmp history is too long").
The follow up verifier work depends on it.
And the fix in
commit 6801cf7890f2 ("selftests/bpf: Use -4095 as the bad address for bits iterator").
It's fixing instability of BPF CI on s390 arch.
No conflicts.
Adjacent changes in:
Auto-merging arch/Kconfig
Auto-merging kernel/bpf/helpers.c
Auto-merging kernel/bpf/memalloc.c
Auto-merging kernel/bpf/verifier.c
Auto-merging mm/slab_common.c
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
|
|
The variable is never referenced in the code, just remove it.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241111061514.3257-1-zhujun2@cmss.chinamobile.com
|
|
These variables are never referenced in the code, just remove them.
Signed-off-by: Zhu Jun <zhujun2@cmss.chinamobile.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20241111062312.3541-1-zhujun2@cmss.chinamobile.com
|
|
When the SIGNED condition is met, the variable `var` should be cast to
`long long` instead of `unsigned long long`.
Signed-off-by: Luo Yifan <luoyifan@cmss.chinamobile.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Reviewed-by: Quentin Monnet <qmo@kernel.org>
Link: https://lore.kernel.org/bpf/20241112073701.283362-1-luoyifan@cmss.chinamobile.com
|
|
https://git.linaro.org/people/daniel.lezcano/linux into timers/core
Pull clocksource/event updates from Daniel Lezcano:
- Remove unused dw_apb_clockevent_[pause|resume|stop] functions as
they are unused since 2021 (David Alan Gilbert)
- Make the sp804 driver user selectable as they may be unused on some
platforms (Mark Brown)
- Don't fail if the ti-dm does not describe an interrupt in the DT as
this could be a normal situation if the PWM is used (Judith Mendez)
- Always use cluster 0 counter as a clocksource on a multi-cluster
system to prevent problems related to the time shifting between
clusters if multiple per cluster clocksource is used (Paul Burton)
- Move the RaLink system tick counter from the arch directory to the
clocksource directory (Sergio Paracuellos)
- Convert the owl-timer bindings into yaml schema (Ivaylo Ivanov)
- Fix child node refcount handling on the TI DM by relying on the
__free annotation to automatically release the refcount on the node
(Javier Carrasco)
- Remove pointless cast in the GPX driver as PTR_ERR already does that
(Tang Bin)
- Use of_property_present() for non-boolean properties where it is
possible in the different drivers (Rob Herring)
Link: https://lore.kernel.org/lkml/8d402321-96f1-47f7-9347-a850350d60de@linaro.org
|
|
Some applications require Vout to be higher than the detectable voltage
range of the Vsense pin for a given rail. In such applications, a voltage
divider may be placed between Vout and the Vsense pin, but this results
in erroneous telemetry being read back from the part. This change adds
support for a voltage divider to be defined in the devicetree for a (or
multiple) specific rail(s) for a supported digital multiphase device and
for the applicable Vout telemetry to be scaled based on the voltage
divider configuration.
This change copies the implementation of the vout-voltage-divider
devicetree property defined in the maxim,max20730 bindings schema since
it is the best fit for the use case of scaling hwmon PMBus telemetry. The
generic voltage-divider property used by many iio drivers was determined
to be a poor fit because that schema is tied directly to iio and the
isl68137 driver is not an iio driver.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Message-ID: <8c2d048f87282bcf66313afbf5e923d8fc17b4d7.1731439797.git.grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Add devicetree bindings to support declaring optional voltage dividers to
the rail outputs of supported digital multiphase regulators. Some
applications require Vout to exceed the voltage range that the Vsense pin
can detect. This binding definition allows users to define the
characteristics of a voltage divider placed between Vout and the Vsense
pin for any rail powered by the device.
These bindings copy the vout-voltage-divider property defined in the
maxim,max20730 bindings schema since it is the best fit for the use case
of scaling hwmon PMBus telemetry. The generic voltage-divider property
used by many iio drivers was determined to be a poor fit because that
schema is tied directly to iio for the purpose of scaling io-channel
voltages and the isl68137 driver is not an iio driver.
New schema file named isil,isl68137.yaml to align with the corresponding
driver name and pre-existing bindings ported from trivial bindings.
However, all new device bindings use renesas as the vendor prefix
since Renesas acquired Intersil and now maintains all documentation
for the devices.
Signed-off-by: Grant Peltier <grantpeltier93@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Message-ID: <f7ac200e982961ff733de27a5c4505c04d68b6f3.1731439797.git.grantpeltier93@gmail.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
It's possible to build a kernel with tmp108 built-in but i3c support
in a loadable module, but that results in a link failure:
x86_64-linux-ld: drivers/hwmon/tmp108.o: in function `p3t1085_i3c_probe':
tmp108.c:(.text+0x5f9): undefined reference to `i3cdev_to_dev'
Add a Kconfig dependency to ensure only the working configurations
are allowed.
Fixes: c40655e33106 ("hwmon: (tmp108) Add support for I3C device")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Message-ID: <20241113175615.2442851-1-arnd@kernel.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
|
|
Fix the following drm_WARN:
[953.586396] xe 0000:00:02.0: [drm] Missing outer runtime PM protection
...
<4> [953.587090] ? xe_pm_runtime_get_noresume+0x8d/0xa0 [xe]
<4> [953.587208] guc_exec_queue_add_msg+0x28/0x130 [xe]
<4> [953.587319] guc_exec_queue_fini+0x3a/0x40 [xe]
<4> [953.587425] xe_exec_queue_destroy+0xb3/0xf0 [xe]
<4> [953.587515] xe_oa_release+0x9c/0xc0 [xe]
Suggested-by: John Harrison <john.c.harrison@intel.com>
Suggested-by: Matthew Brost <matthew.brost@intel.com>
Fixes: e936f885f1e9 ("drm/xe/oa/uapi: Expose OA stream fd")
Cc: stable@vger.kernel.org
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20241109032003.3093811-1-ashutosh.dixit@intel.com
(cherry picked from commit b107c63d2953907908fd0cafb0e543b3c3167b75)
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
|
|
This patch fixes an issue in the function xenbus_dev_probe(). In the
xenbus_dev_probe() function, within the if (err) branch at line 313, the
program incorrectly returns err directly without releasing the resources
allocated by err = drv->probe(dev, id). As the return value is non-zero,
the upper layers assume the processing logic has failed. However, the probe
operation was performed earlier without a corresponding remove operation.
Since the probe actually allocates resources, failing to perform the remove
operation could lead to problems.
To fix this issue, we followed the resource release logic of the
xenbus_dev_remove() function by adding a new block fail_remove before the
fail_put block. After entering the branch if (err) at line 313, the
function will use a goto statement to jump to the fail_remove block,
ensuring that the previously acquired resources are correctly released,
thus preventing the reference count leak.
This bug was identified by an experimental static analysis tool developed
by our team. The tool specializes in analyzing reference count operations
and detecting potential issues where resources are not properly managed.
In this case, the tool flagged the missing release operation as a
potential problem, which led to the development of this patch.
Fixes: 4bac07c993d0 ("xen: add the Xenbus sysfs and virtual device hotplug driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Reviewed-by: Juergen Gross <jgross@suse.com>
Message-ID: <20241105130919.4621-1-chenqiuji666@gmail.com>
Signed-off-by: Juergen Gross <jgross@suse.com>
|
|
The earlier bug fix misplaced the error-label when dealing with the
tpm2_create_primary() return value, which the original completely ignored.
Cc: stable@vger.kernel.org
Reported-by: Christoph Anton Mitterer <calestyo@scientia.org>
Closes: https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=1087331
Fixes: cc7d8594342a ("tpm: Rollback tpm2_load_null()")
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
The initial HMAC session feature added TPM bus encryption and/or integrity
protection to various in-kernel TPM operations. This can cause performance
bottlenecks with IMA, as it heavily utilizes PCR extend operations.
In order to mitigate this performance issue, introduce a kernel
command-line parameter to the TPM driver for disabling the integrity
protection for PCR extend operations (i.e. TPM2_PCR_Extend).
Cc: James Bottomley <James.Bottomley@HansenPartnership.com>
Link: https://lore.kernel.org/linux-integrity/20241015193916.59964-1-zohar@linux.ibm.com/
Fixes: 6519fea6fd37 ("tpm: add hmac checks to tpm2_pcr_extend()")
Tested-by: Mimi Zohar <zohar@linux.ibm.com>
Co-developed-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Co-developed-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
|
|
LIFO ordering for batched completions is a bit unexpected and also
defeats some merging optimizations in e.g. the XFS buffered write
code. Now that we can easily add the request to the tail of the list
do that.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-7-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Add requests to the tail of the list instead of the front so that they
are queued up in submission order.
Remove the re-reordering in blk_mq_dispatch_plug_list, virtio_queue_rqs
and nvme_queue_rqs now that the list is ordered as expected.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-6-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Replace the semi-open coded request list helpers with a proper rq_list
type that mirrors the bio_list and has head and tail pointers. Besides
better type safety this actually allows to insert at the tail of the
list, which will be useful soon.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-5-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Unused now.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-4-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_flush_plug_list submits requests in the reverse order that they
were submitted, which leads to a rather suboptimal I/O pattern
especially in rotational devices. Fix this by rewriting virtio_queue_rqs
so that it always pops the requests from the passed in request list, and
then adds them to the head of a local submit list. This actually
simplifies the code a bit as it removes the complicated list splicing,
at the cost of extra updates of the rq_next pointer. As that should be
cache hot anyway it should be an easy price to pay.
Fixes: 0e9911fa768f ("virtio-blk: support mq_ops->queue_rqs()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
blk_mq_flush_plug_list submits requests in the reverse order that they
were submitted, which leads to a rather suboptimal I/O pattern especially
in rotational devices. Fix this by rewriting nvme_queue_rqs so that it
always pops the requests from the passed in request list, and then adds
them to the head of a local submit list. This actually simplifies the
code a bit as it removes the complicated list splicing, at the cost of
extra updates of the rq_next pointer. As that should be cache hot
anyway it should be an easy price to pay.
Fixes: d62cbcf62f2f ("nvme: add support for mq_ops->queue_rqs()")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20241113152050.157179-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Call blk_validate_limits on the queue limits used for zone append
splitting so that calculated values get filled in and any stacking
conflicts get cought.
Without this there isn't a max_zone_append_sectors limits as of commit
559218d43ec9 ("block: pre-calculate max_zone_append_sectors").
Fixes: 559218d43ec9 ("block: pre-calculate max_zone_append_sectors")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241113084541.34315-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
While block drivers do the validation as part of committing them to the
queue, users that use the limit outside of a block device context have
to validate the limits and fill in the calculated values as well.
So far btrfs is the only user of queue limits without a block device,
and it has gotten away with that more or less by accident. But with
commit 559218d43ec9 ("block: pre-calculate max_zone_append_sectors")
this became fatal for setups that have small max zone append size,
as it won't be limited now.
Export blk_validate_limits so that it can be called directly from btrfs.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20241113084541.34315-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
e1000_down calls netif_queue_set_napi, which assumes that RTNL is held.
There are a few paths for e1000_down to be called in e1000 where RTNL is
not currently being held:
- e1000_shutdown (pci shutdown)
- e1000_suspend (power management)
- e1000_reinit_locked (via e1000_reset_task delayed work)
- e1000_io_error_detected (via pci error handler)
Hold RTNL in three places to fix this issue:
- e1000_reset_task: igc, igb, and e100e all hold rtnl in this path.
- e1000_io_error_detected (pci error handler): e1000e and ixgbe hold
rtnl in this path. A patch has been posted for igc to do the same
[1].
- __e1000_shutdown (which is called from both e1000_shutdown and
e1000_suspend): igb, ixgbe, and e1000e all hold rtnl in the same
path.
The other paths which call e1000_down seemingly hold RTNL and are OK:
- e1000_close (ndo_stop)
- e1000_change_mtu (ndo_change_mtu)
Based on the above analysis and mailing list discussion [2], I believe
adding rtnl in the three places mentioned above is correct.
Fixes: 8f7ff18a5ec7 ("e1000: Link NAPI instances to queues and IRQs")
Reported-by: Dmitry Antipov <dmantipov@yandex.ru>
Closes: https://lore.kernel.org/netdev/8cf62307-1965-46a0-a411-ff0080090ff9@yandex.ru/
Link: https://lore.kernel.org/netdev/20241022215246.307821-3-jdamato@fastly.com/ [1]
Link: https://lore.kernel.org/netdev/ZxgVRX7Ne-lTjwiJ@LQ3V64L9R2/ [2]
Signed-off-by: Joe Damato <jdamato@fastly.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
|
tx_queue_lock and stats_lock are declared and initialized, but never
used. Remove them.
Signed-off-by: Wander Lairson Costa <wander@redhat.com>
Reviewed-by: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
|
