| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount updates from Christian Brauner:
"This contains minor mount updates for this cycle:
- mnt->mnt_devname can never be NULL so simplify the code handling
that case
- Add a comment about concurrent changes during statmount() and
listmount()
- Update the STATMOUNT_SUPPORTED macro
- Convert mount flags to an enum"
* tag 'vfs-6.16-rc1.mount' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
statmount: update STATMOUNT_SUPPORTED macro
fs: convert mount flags to enum
->mnt_devname is never NULL
mount: add a comment about concurrent changes with statmount()/listmount()
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following batch contains Netfilter updates for net-next,
specifically 26 patches: 5 patches adding/updating selftests,
4 fixes, 3 PREEMPT_RT fixes, and 14 patches to enhance nf_tables):
1) Improve selftest coverage for pipapo 4 bit group format, from
Florian Westphal.
2) Fix incorrect dependencies when compiling a kernel without
legacy ip{6}tables support, also from Florian.
3) Two patches to fix nft_fib vrf issues, including selftest updates
to improve coverage, also from Florian Westphal.
4) Fix incorrect nesting in nft_tunnel's GENEVE support, from
Fernando F. Mancera.
5) Three patches to fix PREEMPT_RT issues with nf_dup infrastructure
and nft_inner to match in inner headers, from Sebastian Andrzej Siewior.
6) Integrate conntrack information into nft trace infrastructure,
from Florian Westphal.
7) A series of 13 patches to allow to specify wildcard netdevice in
netdev basechain and flowtables, eg.
table netdev filter {
chain ingress {
type filter hook ingress devices = { eth0, eth1, vlan* } priority 0; policy accept;
}
}
This also allows for runtime hook registration on NETDEV_{UN}REGISTER
event, from Phil Sutter.
netfilter pull request 25-05-23
* tag 'nf-next-25-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next: (26 commits)
selftests: netfilter: Torture nftables netdev hooks
netfilter: nf_tables: Add notifications for hook changes
netfilter: nf_tables: Support wildcard netdev hook specs
netfilter: nf_tables: Sort labels in nft_netdev_hook_alloc()
netfilter: nf_tables: Handle NETDEV_CHANGENAME events
netfilter: nf_tables: Wrap netdev notifiers
netfilter: nf_tables: Respect NETDEV_REGISTER events
netfilter: nf_tables: Prepare for handling NETDEV_REGISTER events
netfilter: nf_tables: Have a list of nf_hook_ops in nft_hook
netfilter: nf_tables: Pass nf_hook_ops to nft_unregister_flowtable_hook()
netfilter: nf_tables: Introduce nft_register_flowtable_ops()
netfilter: nf_tables: Introduce nft_hook_find_ops{,_rcu}()
netfilter: nf_tables: Introduce functions freeing nft_hook objects
netfilter: nf_tables: add packets conntrack state to debug trace info
netfilter: conntrack: make nf_conntrack_id callable without a module dependency
netfilter: nf_dup_netdev: Move the recursion counter struct netdev_xmit
netfilter: nft_inner: Use nested-BH locking for nft_pcpu_tun_ctx
netfilter: nf_dup{4, 6}: Move duplication check to task_struct
netfilter: nft_tunnel: fix geneve_opt dump
selftests: netfilter: nft_fib.sh: add type and oif tests with and without VRFs
...
====================
Link: https://patch.msgid.link/20250523132712.458507-1-pablo@netfilter.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Merge ACPI processor driver updates and ACPI CPPC library updates for
6.16-rc1:
- Clean up the initialization of CPU data structures in the ACPI
processor driver (Zhang Rui).
- Remove an obsolete comment regarding the C-states handling in the
ACPI processor driver (Giovanni Gherdovich).
- Simplify PCC shared memory region handling (Sudeep Holla).
- Rework and extend functions for reading CPPC register values and for
updating CPPC registers (Lifeng Zheng).
- Add three functions related to autonomous CPU performance state
selection to the CPPC library (Lifeng Zheng).
* acpi-processor:
ACPI: processor: idle: Remove redundant pr->power.count assignment
ACPI: processor: idle: Set pr->flags.power unconditionally
ACPI: processor: idle: Remove obsolete comment
* acpi-cppc:
ACPI: CPPC: Add three functions related to autonomous selection
ACPI: CPPC: Modify cppc_get_auto_sel_caps() to cppc_get_auto_sel()
ACPI: CPPC: Refactor register value get and set ABIs
ACPI: CPPC: Add cppc_set_reg_val()
ACPI: CPPC: Extract cppc_get_reg_val_in_pcc()
ACPI: CPPC: Rename cppc_get_perf() to cppc_get_reg_val()
ACPI: CPPC: Optimize cppc_get_perf()
ACPI: CPPC: Add IS_OPTIONAL_CPC_REG macro to judge if a cpc_reg is optional
ACPI: CPPC: Simplify PCC shared memory region handling
ACPI: PCC: Simplify PCC shared memory region handling
|
|
Merge updates related to the handling of static (data-only) ACPI tables
for 6.16-rc1:
- Add __nonstring annotations for unterminated strings in the static
ACPI tables parsing code (Kees Cook).
- Add support for parsing the MRRM ACPI table and sysfs files to
describe memory regions listed in it (Tony Luck, Anil Keshavamurthy).
- Remove an (explicitly) unused header file include from the VIOT ACPI
table parser file (Andy Shevchenko).
- Improve logging around acpi_initialize_tables() (Bartosz Szczepanek).
* acpi-tables:
ACPI: MRRM: Fix default max memory region
ACPI: tables: Improve logging around acpi_initialize_tables()
ACPI: VIOT: Remove (explicitly) unused header
ACPI: Add documentation for exposing MRRM data
ACPI: MRRM: Add /sys files to describe memory ranges
ACPI: MRRM: Minimal parse of ACPI MRRM table
ACPI: tables: Add __nonstring annotations for unterminated strings
|
|
Merge ACPICA updates, including two upstream releases 20241212 and
20250404, for 6.16-rc1:
- Fix two ACPICA SLAB cache leaks (Seunghun Han).
- Add EINJv2 get error type action and define Error Injection Actions
in hex values to avoid inconsistencies between the specification and
the code (Zaid Alali).
- Fix typo in comments for SRAT structures (Adam Lackorzynski).
- Prevent possible loss of data in ACPICA because of u32 to u8
conversions (Saket Dumbre).
- Fix reading FFixedHW operation regions in ACPICA (Daniil Tatianin).
- Add support for printing AML arguments when the ACPICA debug level is
ACPI_LV_TRACE_POINT (Mario Limonciello).
- Drop a stale comment about the file content from actbl2.h (Sudeep
Holla).
- Apply pack(1) to union aml_resource (Tamir Duberstein).
- Fix overflow check in the ACPICA version of vsnprintf() (gldrk).
- Interpret SIDP structures in DMAR added revision 3.4 of the VT-d
specification (Alexey Neyman).
- Add typedef and other definitions related to MRRM to ACPICA (Tony
Luck).
- Add definitions for RIMT to ACPICA (Sunil V L).
- Fix spelling mistake "Incremement" -> "Increment" in the ACPICA
utilities code (Colin Ian King).
- Add typedef and other definitions for ERDT to ACPICA (Tony Luck).
- Introduce ACPI_NONSTRING and use it (Kees Cook, Ahmed Salem).
- Rename structure and field names of the RAS2 table in actbl2.h (Shiju
Jose).
- Fix up whitespace in acpica/utcache.c (Zhe Qiao).
- Avoid sequence overread in a call to strncmp() in ap_get_table_length()
and replace strncpy() with memcpy() in ACPICA in some places (Ahmed
Salem).
- Update copyright year in all ACPICA files (Saket Dumbre).
* acpica: (30 commits)
ACPICA: Update copyright year
ACPICA: Logfile: Changes for version 20250404
ACPICA: Replace strncpy() with memcpy()
ACPICA: Apply ACPI_NONSTRING in more places
ACPICA: Avoid sequence overread in call to strncmp()
ACPICA: Adjust the position of code lines
ACPICA: actbl2.h: ACPI 6.5: RAS2: Rename structure and field names of the RAS2 table
ACPICA: Apply ACPI_NONSTRING
ACPICA: Introduce ACPI_NONSTRING
ACPICA: actbl2.h: ERDT: Add typedef and other definitions
ACPICA: infrastructure: Add new DMT_BUF types and shorten a long name
ACPICA: Utilities: Fix spelling mistake "Incremement" -> "Increment"
ACPICA: MRRM: Some cleanups
ACPICA: actbl2: Add definitions for RIMT
ACPICA: actbl2.h: MRRM: Add typedef and other definitions
ACPICA: infrastructure: Add new header and ACPI_DMT_BUF26 types
ACPICA: Interpret SIDP structures in DMAR
ACPICA: utilities: Fix overflow check in vsnprintf()
ACPICA: Apply pack(1) to union aml_resource
ACPICA: Drop stale comment about the header file content
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs freezing updates from Christian Brauner:
"This contains various filesystem freezing related work for this cycle:
- Allow the power subsystem to support filesystem freeze for suspend
and hibernate.
Now all the pieces are in place to actually allow the power
subsystem to freeze/thaw filesystems during suspend/resume.
Filesystems are only frozen and thawed if the power subsystem does
actually own the freeze.
If the filesystem is already frozen by the time we've frozen all
userspace processes we don't care to freeze it again. That's
userspace's job once the process resumes. We only actually freeze
filesystems if we absolutely have to and we ignore other failures
to freeze.
We could bubble up errors and fail suspend/resume if the error
isn't EBUSY (aka it's already frozen) but I don't think that this
is worth it. Filesystem freezing during suspend/resume is
best-effort. If the user has 500 ext4 filesystems mounted and 4
fail to freeze for whatever reason then we simply skip them.
What we have now is already a big improvement and let's see how we
fare with it before making our lives even harder (and uglier) than
we have to.
- Allow efivars to support freeze and thaw
Allow efivarfs to partake to resync variable state during system
hibernation and suspend. Add freeze/thaw support.
This is a pretty straightforward implementation. We simply add
regular freeze/thaw support for both userspace and the kernel.
efivars is the first pseudofilesystem that adds support for
filesystem freezing and thawing.
The simplicity comes from the fact that we simply always resync
variable state after efivarfs has been frozen. It doesn't matter
whether that's because of suspend, userspace initiated freeze or
hibernation. Efivars is simple enough that it doesn't matter that
we walk all dentries. There are no directories and there aren't
insane amounts of entries and both freeze/thaw are already
heavy-handed operations. If userspace initiated a freeze/thaw cycle
they would need CAP_SYS_ADMIN in the initial user namespace (as
that's where efivarfs is mounted) so it can't be triggered by
random userspace. IOW, we really really don't care"
* tag 'vfs-6.16-rc1.super' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
f2fs: fix freezing filesystem during resize
kernfs: add warning about implementing freeze/thaw
efivarfs: support freeze/thaw
power: freeze filesystems during suspend/resume
libfs: export find_next_child()
super: add filesystem freezing helpers for suspend and hibernate
gfs2: pass through holder from the VFS for freeze/thaw
super: use common iterator (Part 2)
super: use a common iterator (Part 1)
super: skip dying superblocks early
super: simplify user_get_super()
super: remove pointless s_root checks
fs: allow all writers to be frozen
locking/percpu-rwsem: add freezable alternative to down_read
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next
Steffen Klassert says:
====================
1) Remove some unnecessary strscpy_pad() size arguments.
From Thorsten Blum.
2) Correct use of xso.real_dev on bonding offloads.
Patchset from Cosmin Ratiu.
3) Add hardware offload configuration to XFRM_MSG_MIGRATE.
From Chiachang Wang.
4) Refactor migration setup during cloning. This was
done after the clone was created. Now it is done
in the cloning function itself.
From Chiachang Wang.
5) Validate assignment of maximal possible SEQ number.
Prevent from setting to the maximum sequrnce number
as this would cause for traffic drop.
From Leon Romanovsky.
6) Prevent configuration of interface index when offload
is used. Hardware can't handle this case.i
From Leon Romanovsky.
7) Always use kfree_sensitive() for SA secret zeroization.
From Zilin Guan.
ipsec-next-2025-05-23
* tag 'ipsec-next-2025-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/klassert/ipsec-next:
xfrm: use kfree_sensitive() for SA secret zeroization
xfrm: prevent configuration of interface index when offload is used
xfrm: validate assignment of maximal possible SEQ number
xfrm: Refactor migration setup during the cloning process
xfrm: Migrate offload configuration
bonding: Fix multiple long standing offload races
bonding: Mark active offloaded xfrm_states
xfrm: Add explicit dev to .xdo_dev_state_{add,delete,free}
xfrm: Remove unneeded device check from validate_xmit_xfrm
xfrm: Use xdo.dev instead of xdo.real_dev
net/mlx5: Avoid using xso.real_dev unnecessarily
xfrm: Remove unnecessary strscpy_pad() size arguments
====================
Link: https://patch.msgid.link/20250523075611.3723340-1-steffen.klassert@secunet.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-05-22
this is a pull request of 22 patches for net-next/main.
The series by Biju Das contains 19 patches and adds RZ/G3E CANFD
support to the rcar_canfd driver.
The patch by Vincent Mailhol adds a struct data_bittiming_params to
group FD parameters as a preparation patch for CAN-XL support.
Felix Maurer's patch imports tst-filter from can-tests into the kernel
self tests and Vincent Mailhol adds support for physical CAN
interfaces.
linux-can-next-for-6.16-20250522
* tag 'linux-can-next-for-6.16-20250522' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
selftests: can: test_raw_filter.sh: add support of physical interfaces
selftests: can: Import tst-filter from can-tests
can: dev: add struct data_bittiming_params to group FD parameters
can: rcar_canfd: Add RZ/G3E support
can: rcar_canfd: Enhance multi_channel_irqs handling
can: rcar_canfd: Add external_clk variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add sh variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add struct rcanfd_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add shared_can_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add ch_interface_mode variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add {nom,data}_bittiming variables to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_cftml variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_aflpn variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add rnc_field_width variable to struct rcar_canfd_hw_info
can: rcar_canfd: Update RCANFD_GAFLCFG macro
can: rcar_canfd: Add rcar_canfd_setrnc()
can: rcar_canfd: Drop the mask operation in RCANFD_GAFLCFG_SETRNC macro
can: rcar_canfd: Update RCANFD_GERFL_ERR macro
can: rcar_canfd: Drop RCANFD_GAFLCFG_GETRNC macro
can: rcar_canfd: Use of_get_available_child_by_name()
...
====================
Link: https://patch.msgid.link/20250522084128.501049-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Send link events one after another otherwise new message
is overwriting the message which is being processed by PF.
Fixes: a88e0f936ba9 ("octeontx2: Detect the mbox up or down message via register")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/1747823443-404-1-git-send-email-sbhatta@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Clean Rust documentation section headers to use plural names.
Suggested-by: Miguel Ojeda <ojeda@kernel.org>
Link: https://github.com/Rust-for-Linux/linux/issues/1110
Signed-off-by: Patrick Miller <paddymills@proton.me>
Link: https://lore.kernel.org/r/20241002022749.390836-1-paddymills@proton.me
[ Removed the `init` one that doesn't apply anymore and
reworded slightly. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull misc vfs updates from Christian Brauner:
"This contains the usual selections of misc updates for this cycle.
Features:
- Use folios for symlinks in the page cache
FUSE already uses folios for its symlinks. Mirror that conversion
in the generic code and the NFS code. That lets us get rid of a few
folio->page->folio conversions in this path, and some of the few
remaining users of read_cache_page() / read_mapping_page()
- Try and make a few filesystem operations killable on the VFS
inode->i_mutex level
- Add sysctl vfs_cache_pressure_denom for bulk file operations
Some workloads need to preserve more dentries than we currently
allow through out sysctl interface
A HDFS servers with 12 HDDs per server, on a HDFS datanode startup
involves scanning all files and caching their metadata (including
dentries and inodes) in memory. Each HDD contains approximately 2
million files, resulting in a total of ~20 million cached dentries
after initialization
To minimize dentry reclamation, they set vfs_cache_pressure to 1.
Despite this configuration, memory pressure conditions can still
trigger reclamation of up to 50% of cached dentries, reducing the
cache from 20 million to approximately 10 million entries. During
the subsequent cache rebuild period, any HDFS datanode restart
operation incurs substantial latency penalties until full cache
recovery completes
To maintain service stability, more dentries need to be preserved
during memory reclamation. The current minimum reclaim ratio (1/100
of total dentries) remains too aggressive for such workload. This
patch introduces vfs_cache_pressure_denom for more granular cache
pressure control
The configuration [vfs_cache_pressure=1,
vfs_cache_pressure_denom=10000] effectively maintains the full 20
million dentry cache under memory pressure, preventing datanode
restart performance degradation
- Avoid some jumps in inode_permission() using likely()/unlikely()
- Avid a memory access which is most likely a cache miss when
descending into devcgroup_inode_permission()
- Add fastpath predicts for stat() and fdput()
- Anonymous inodes currently don't come with a proper mode causing
issues in the kernel when we want to add useful VFS debug assert.
Fix that by giving them a proper mode and masking it off when we
report it to userspace which relies on them not having any mode
- Anonymous inodes currently allow to change inode attributes because
the VFS falls back to simple_setattr() if i_op->setattr isn't
implemented. This means the ownership and mode for every single
user of anon_inode_inode can be changed. Block that as it's either
useless or actively harmful. If specific ownership is needed the
respective subsystem should allocate anonymous inodes from their
own private superblock
- Raise SB_I_NODEV and SB_I_NOEXEC on the anonymous inode superblock
- Add proper tests for anonymous inode behavior
- Make it easy to detect proper anonymous inodes and to ensure that
we can detect them in codepaths such as readahead()
Cleanups:
- Port pidfs to the new anon_inode_{g,s}etattr() helpers
- Try to remove the uselib() system call
- Add unlikely branch hint return path for poll
- Add unlikely branch hint on return path for core_sys_select
- Don't allow signals to interrupt getdents copying for fuse
- Provide a size hint to dir_context for during readdir()
- Use writeback_iter directly in mpage_writepages
- Update compression and mtime descriptions in initramfs
documentation
- Update main netfs API document
- Remove useless plus one in super_cache_scan()
- Remove unnecessary NULL-check guards during setns()
- Add separate separate {get,put}_cgroup_ns no-op cases
Fixes:
- Fix typo in root= kernel parameter description
- Use KERN_INFO for infof()|info_plog()|infofc()
- Correct comments of fs_validate_description()
- Mark an unlikely if condition with unlikely() in
vfs_parse_monolithic_sep()
- Delete macro fsparam_u32hex()
- Remove unused and problematic validate_constant_table()
- Fix potential unsigned integer underflow in fs_name()
- Make file-nr output the total allocated file handles"
* tag 'vfs-6.16-rc1.misc' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (43 commits)
fs: Pass a folio to page_put_link()
nfs: Use a folio in nfs_get_link()
fs: Convert __page_get_link() to use a folio
fs/read_write: make default_llseek() killable
fs/open: make do_truncate() killable
fs/open: make chmod_common() and chown_common() killable
include/linux/fs.h: add inode_lock_killable()
readdir: supply dir_context.count as readdir buffer size hint
vfs: Add sysctl vfs_cache_pressure_denom for bulk file operations
fuse: don't allow signals to interrupt getdents copying
Documentation: fix typo in root= kernel parameter description
include/cgroup: separate {get,put}_cgroup_ns no-op case
kernel/nsproxy: remove unnecessary guards
fs: use writeback_iter directly in mpage_writepages
fs: remove useless plus one in super_cache_scan()
fs: add S_ANON_INODE
fs: remove uselib() system call
device_cgroup: avoid access to ->i_rdev in the common case in devcgroup_inode_permission()
fs/fs_parse: Remove unused and problematic validate_constant_table()
fs: touch up predicts in inode_permission()
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs mount api conversions from Christian Brauner:
"This converts the bfs and omfs filesystems to the new mount api"
* tag 'vfs-6.16-rc1.mount.api' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
omfs: convert to new mount API
bfs: convert bfs to use the new mount api
|
|
Commit dbd5058ba60c ("rust: make pin-init its own crate") moved all
items from pin-init into the pin-init crate, including the
`assert_pinned!` macro.
Thus fix the path of the sole user of the `assert_pinned!` macro.
This occurrence was missed in the commit above, since it is in a macro
rule that has no current users (although binder is a future user).
Cc: stable@kernel.org
Fixes: dbd5058ba60c ("rust: make pin-init its own crate")
Signed-off-by: Benno Lossin <lossin@kernel.org>
Link: https://lore.kernel.org/r/20250525173450.853413-1-lossin@kernel.org
[ Reworded slightly as discussed in the list. - Miguel ]
Signed-off-by: Miguel Ojeda <ojeda@kernel.org>
|
|
Jakub suggests:
> I have a different request :) Matt, once this ends up in net-next
> (end of this week) could you refactor it to use nlmsg_payload() ?
> It doesn't exist in net but this is exactly why it was added.
This refactors the additions to both mctp_dump_addrinfo(), and
mctp_rtm_getneigh() - two cases where we're calling nlh_data() on an
an incoming netlink message, without a prior nlmsg_parse().
For the neigh.c case, we cannot hit the failure where the nlh does not
contain a full ndmsg at present, as the core handler
(net/core/neighbour.c, neigh_get()) has already validated the size
through neigh_valid_req_get(), and would have failed the get operation
before the MCTP hander is called.
However, relying on that is a bit fragile, so apply the nlmsg_payload
refector here too.
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Link: https://patch.msgid.link/20250521-mctp-nlmsg-payload-v2-1-e85df160c405@codeconstruct.com.au
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
'add-the-capability-to-consume-sram-for-hwfd-descriptor-queue-in-airoha_eth-driver'
Lorenzo Bianconi says:
====================
Add the capability to consume SRAM for hwfd descriptor queue in airoha_eth driver
In order to improve packet processing and packet forwarding
performances, EN7581 SoC supports consuming SRAM instead of DRAM for hw
forwarding descriptors queue. For downlink hw accelerated traffic
request to consume SRAM memory for hw forwarding descriptors queue.
Moreover, in some configurations QDMA blocks require a contiguous block
of system memory for hwfd buffers queue. Introduce the capability to
allocate hw buffers forwarding queue via the reserved-memory DTS
property instead of running dmam_alloc_coherent().
v2: https://lore.kernel.org/r/20250509-airopha-desc-sram-v2-0-9dc3d8076dfb@kernel.org
v1: https://lore.kernel.org/r/20250507-airopha-desc-sram-v1-0-d42037431bfa@kernel.org
====================
Link: https://patch.msgid.link/20250521-airopha-desc-sram-v3-0-a6e9b085b4f0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In order to improve packet processing and packet forwarding
performances, EN7581 SoC supports consuming SRAM instead of DRAM for
hw forwarding descriptors queue.
For downlink hw accelerated traffic request to consume SRAM memory
for hw forwarding descriptors queue.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250521-airopha-desc-sram-v3-4-a6e9b085b4f0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
In some configurations QDMA blocks require a contiguous block of
system memory for hwfd buffers queue. Introduce the capability to allocate
hw buffers forwarding queue via the reserved-memory DTS property instead of
running dmam_alloc_coherent().
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250521-airopha-desc-sram-v3-3-a6e9b085b4f0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since hfwd descriptor and buffer queues are allocated via
dmam_alloc_coherent() we do not need to store their references
in airoha_qdma struct. This patch does not introduce any logical changes,
just code clean-up.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250521-airopha-desc-sram-v3-2-a6e9b085b4f0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Introduce memory-region and memory-region-names properties for the
ethernet node available on EN7581 SoC in order to reserve system memory
for hw forwarding buffers queue used by the QDMA modules.
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://patch.msgid.link/20250521-airopha-desc-sram-v3-1-a6e9b085b4f0@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Jiawen Wu says:
====================
Support phylink and link/gpio irqs for AML 25G/10G devices, and complete
PTP and SRIOV.
====================
Link: https://patch.msgid.link/
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since .mac_link_up and .mac_link_down are changed for AML 25G/10G NICs,
the SR-IOV related function should be invoked in these new functions, to
bring VFs link up.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/BA8B302B7AAB6EA6+20250521064402.22348-10-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Support PTP clock and 1PPS output signal for AML devices.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/F2F6E5E8899D2C20+20250521064402.22348-9-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The new added mailbox commands require a new released firmware version.
Otherwise, a lot of logs "Unknown FW command" would be printed. And the
devices may not work properly. So add the test command in the probe
function.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/18283F17BE0FA335+20250521064402.22348-8-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For AML 25G/10G devices, some of the information returned from
phylink_ethtool_ksettings_get() is not correct, since there is a
fixed-link mode. So add additional corrections.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/C94BF867617C544D+20250521064402.22348-7-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The driver needs to handle GPIO interrupts to identify SFP module and
configure PHY by sending mailbox messages to firmware.
Since the SFP module needs to wait for ready to get information when it
is inserted, workqueue is added to handle delayed tasks. And each SW-FW
interaction takes time to wait, so they are processed in the workqueue
instead of IRQ handler function.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/399624AF221E8E28+20250521064402.22348-6-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
There is a new PHY attached to AML 25G/10G NIC, which is different from
SP 10G/1G NIC. But the PHY configuration is handed over to firmware, and
also I2C is controlled by firmware. So the different PHYLINK fixed-link
mode is added for these devices.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/987B973A5929CD48+20250521064402.22348-5-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
For the following patches to support PHYLINK for AML 25G devices,
separate MAC type wx_mac_aml40 to maintain the driver of 40G devices.
Because 40G devices will complete support later, not now.
And this patch makes the 25G devices use some PHYLINK interfaces, but it
is not yet create PHYLINK and cannot be used on its own. It is just
preparation for the next patches.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/592B1A6920867D0C+20250521064402.22348-4-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Most of the different code that requires MAC type in the common library
is due to NGBE only supports a few queues and pools, unlike TXGBE, which
supports 128 queues and 64 pools. This difference accounts for most of
the hardware configuration differences in the driver code. So add a flag
bit "WX_FLAG_MULTI_64_FUNC" for them to clean-up the driver code.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/C731132E124D75E5+20250521064402.22348-3-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
Since AML devices are going to reuse some definitions, remove the "SP"
qualifier from these definitions.
Signed-off-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/8EF712EC14B8FF70+20250521064402.22348-2-jiawenwu@trustnetic.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull final writepage conversion from Christian Brauner:
"This converts vboxfs from ->writepage() to ->writepages().
This was the last user of the ->writepage() method. So remove
->writepage() completely and all references to it"
* tag 'vfs-6.16-rc1.writepage' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
fs: Remove aops->writepage
mm: Remove swap_writepage() and shmem_writepage()
ttm: Call shmem_writeout() from ttm_backup_backup_page()
i915: Use writeback_iter()
shmem: Add shmem_writeout()
writeback: Remove writeback_use_writepage()
migrate: Remove call to ->writepage
vboxsf: Convert to writepages
9p: Add a migrate_folio method
|
|
The KSZ9477 switch driver uses the XPCS driver to operate its SGMII
port. However there are some hardware bugs in the KSZ9477 SGMII
module so workarounds are needed. There was a proposal to update the
XPCS driver to accommodate KSZ9477, but the new code is not generic
enough to be used by other vendors. It is better to do all these
workarounds inside the KSZ9477 driver instead of modifying the XPCS
driver.
There are 3 hardware issues. The first is the MII_ADVERTISE register
needs to be write once after reset for the correct code word to be
sent. The XPCS driver disables auto-negotiation first before
configuring the SGMII/1000BASE-X mode and then enables it back. The
KSZ9477 driver then writes the MII_ADVERTISE register before enabling
auto-negotiation. In 1000BASE-X mode the MII_ADVERTISE register will
be set, so KSZ9477 driver does not need to write it.
The second issue is the MII_BMCR register needs to set the exact speed
and duplex mode when running in SGMII mode. During link polling the
KSZ9477 will check the speed and duplex mode are different from
previous ones and update the MII_BMCR register accordingly.
The last issue is 1000BASE-X mode does not work with auto-negotiation
on. The cause is the local port hardware does not know the link is up
and so network traffic is not forwarded. The workaround is to write 2
additional bits when 1000BASE-X mode is configured.
Note the SGMII interrupt in the port cannot be masked. As that
interrupt is not handled in the KSZ9477 driver the SGMII interrupt bit
will not be set even when the XPCS driver sets it.
Signed-off-by: Tristram Ha <tristram.ha@microchip.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Link: https://patch.msgid.link/20250520230720.23425-1-Tristram.Ha@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs
Pull vfs directory lookup updates from Christian Brauner:
"This contains cleanups for the lookup_one*() family of helpers.
We expose a set of functions with names containing "lookup_one_len"
and others without the "_len". This difference has nothing to do with
"len". It's rater a historical accident that can be confusing.
The functions without "_len" take a "mnt_idmap" pointer. This is found
in the "vfsmount" and that is an important question when choosing
which to use: do you have a vfsmount, or are you "inside" the
filesystem. A related question is "is permission checking relevant
here?".
nfsd and cachefiles *do* have a vfsmount but *don't* use the non-_len
functions. They pass nop_mnt_idmap and refuse to work on filesystems
which have any other idmap.
This work changes nfsd and cachefile to use the lookup_one family of
functions and to explictily pass &nop_mnt_idmap which is consistent
with all other vfs interfaces used where &nop_mnt_idmap is explicitly
passed.
The remaining uses of the "_one" functions do not require permission
checks so these are renamed to be "_noperm" and the permission
checking is removed.
This series also changes these lookup function to take a qstr instead
of separate name and len. In many cases this simplifies the call"
* tag 'vfs-6.16-rc1.async.dir' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs:
VFS: change lookup_one_common and lookup_noperm_common to take a qstr
Use try_lookup_noperm() instead of d_hash_and_lookup() outside of VFS
VFS: rename lookup_one_len family to lookup_noperm and remove permission check
cachefiles: Use lookup_one() rather than lookup_one_len()
nfsd: Use lookup_one() rather than lookup_one_len()
VFS: improve interface for lookup_one functions
|
|
Syzkaller, courtesy of syzbot, identified an error (see report [1]) in
aqc111 driver, caused by incomplete sanitation of usb read calls'
results. This problem is quite similar to the one fixed in commit
920a9fa27e78 ("net: asix: add proper error handling of usb read errors").
For instance, usbnet_read_cmd() may read fewer than 'size' bytes,
even if the caller expected the full amount, and aqc111_read_cmd()
will not check its result properly. As [1] shows, this may lead
to MAC address in aqc111_bind() being only partly initialized,
triggering KMSAN warnings.
Fix the issue by verifying that the number of bytes read is
as expected and not less.
[1] Partial syzbot report:
BUG: KMSAN: uninit-value in is_valid_ether_addr include/linux/etherdevice.h:208 [inline]
BUG: KMSAN: uninit-value in usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830
is_valid_ether_addr include/linux/etherdevice.h:208 [inline]
usbnet_probe+0x2e57/0x4390 drivers/net/usb/usbnet.c:1830
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:-1 [inline]
really_probe+0x4d1/0xd90 drivers/base/dd.c:658
__driver_probe_device+0x268/0x380 drivers/base/dd.c:800
...
Uninit was stored to memory at:
dev_addr_mod+0xb0/0x550 net/core/dev_addr_lists.c:582
__dev_addr_set include/linux/netdevice.h:4874 [inline]
eth_hw_addr_set include/linux/etherdevice.h:325 [inline]
aqc111_bind+0x35f/0x1150 drivers/net/usb/aqc111.c:717
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
...
Uninit was stored to memory at:
ether_addr_copy include/linux/etherdevice.h:305 [inline]
aqc111_read_perm_mac drivers/net/usb/aqc111.c:663 [inline]
aqc111_bind+0x794/0x1150 drivers/net/usb/aqc111.c:713
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
usb_probe_interface+0xd01/0x1310 drivers/usb/core/driver.c:396
call_driver_probe drivers/base/dd.c:-1 [inline]
...
Local variable buf.i created at:
aqc111_read_perm_mac drivers/net/usb/aqc111.c:656 [inline]
aqc111_bind+0x221/0x1150 drivers/net/usb/aqc111.c:713
usbnet_probe+0xbe6/0x4390 drivers/net/usb/usbnet.c:1772
Reported-by: syzbot+3b6b9ff7b80430020c7b@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=3b6b9ff7b80430020c7b
Tested-by: syzbot+3b6b9ff7b80430020c7b@syzkaller.appspotmail.com
Fixes: df2d59a2ab6c ("net: usb: aqc111: Add support for getting and setting of MAC address")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Link: https://patch.msgid.link/20250520113240.2369438-1-n.zhandarovich@fintech.ru
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
|
|
The function max14577_reg_get_current_limit() calls the function
max14577_read_reg(), but does not check its return value. A proper
implementation can be found in max14577_get_online().
Add a error check for the max14577_read_reg() and return error code
if the function fails.
Fixes: b0902bbeb768 ("regulator: max14577: Add regulator driver for Maxim 14577")
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Link: https://patch.msgid.link/20250526025627.407-1-vulab@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
'struct thermal_zone_device_ops' could be left unmodified in this driver.
Constifying this structure moves some data to a read-only section, so
increases overall security, especially when the structure holds some
function pointers.
While at it, also constify a struct thermal_zone_params.
On a x86_64, with allmodconfig:
Before:
======
text data bss dec hex filename
26422 12584 512 39518 9a5e drivers/platform/x86/acerhdf.o
After:
=====
text data bss dec hex filename
26646 12360 512 39518 9a5e drivers/platform/x86/acerhdf.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/e502fadf2c6b24fc4ec3a7880533f7ca68429720.1748177235.git.christophe.jaillet@wanadoo.fr
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
|
|
xfstests generic/482 tests the file system consistency after each
FUA operation. It fails when run on exfat.
exFAT clears the volume dirty flag with a FUA operation during sync.
Since s_lock is not held when data is being written to a file, sync
can be executed at the same time. When data is being written to a
file, the FAT chain is updated first, and then the file size is
updated. If sync is executed between updating them, the length of the
FAT chain may be inconsistent with the file size.
To avoid the situation where the file system is inconsistent but the
volume dirty flag is cleared, this commit moves the clearing of the
volume dirty flag from exfat_fs_sync() to exfat_put_super(), so that
the volume dirty flag is not cleared until unmounting. After the
move, there is no additional action during sync, so exfat_fs_sync()
can be deleted.
Reviewed-by: Sungjong Seo <sj1557.seo@samsung.com>
Signed-off-by: Yuezhang Mo <Yuezhang.Mo@sony.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
The double free could happen in the following path.
exfat_create_upcase_table()
exfat_create_upcase_table() : return error
exfat_free_upcase_table() : free ->vol_utbl
exfat_load_default_upcase_table : return error
exfat_kill_sb()
delayed_free()
exfat_free_upcase_table() <--------- double free
This patch set ->vol_util as NULL after freeing it.
Reported-by: Jianzhou Zhao <xnxc22xnxc22@qq.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
|
|
Adjust the enabling/disabling steps of the DP audio SDP splitting
according to a recent Bspec update. This moves the enabling to the audio
codec enable sequence after the transcoder is enabled and disables SDP
splitting explicitly during the audio disable sequence.
Bspec requires waiting for a vblank event after the transcoder is
enabled and before SDP splitting is enabled. There is no need for an
explicit wait for this, since after the transcoder is enabled this
vblank event is guaranteed to have happened via a flip done wait (see
intel_atomic_commit_tail() -> drm_atomic_helper_wait_for_flip_done()).
The bspec update is for LNL+ only, but the HW team clarified that this
has been always the intended sequence on all platforms and bspec will be
updated everywhere accordingly.
The way SDP splitting was originally enabled matched the version of
bspec at that time. Adding here the Fixes: line still, since this
change fixes a FIFO underrun on PTL during output enabling when DSC is
enabled.
Bspec: 49283, 68943
Fixes: 8853750dbad8 ("drm/i915: Enable SDP split for DP2.0")
Cc: Vinod Govindapillai <vinod.govindapillai@intel.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Vinod Govindapillai <vinod.govindapillai@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Link: https://lore.kernel.org/r/20250520142219.1688401-1-imre.deak@intel.com
(cherry picked from commit 56764c845aa5be14cd53702fc9f2da23e25857de)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
|
|
The doctest example uses a function only available for CONFIG_OF and so
the build with doc tests fails when it isn't enabled.
error[E0599]: no function or associated item named `from_of_cpumask`
found for struct `rust_doctest_kernel_alloc_kbox_rs_4::kernel::opp::Table`
in the current scope
Fix this by making the doctest depend on CONFIG_OF.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505260856.ZQWHW2xT-lkp@intel.com/
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Link: https://patch.msgid.link/a80bfedcb4d94531dc27d3b48062db5042078e88.1748237646.git.viresh.kumar@linaro.org
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm
Merge operating performance points (OPP) updates for 6.16 from Viresh
Kumar:
"- OPP: Add dev_pm_opp_set_level() (Praveen Talari).
- Introduce scope-based cleanup headers and mutex locking guards in OPP
core (Viresh Kumar).
- switch to use kmemdup_array() (Zhang Enpei)."
* tag 'opp-updates-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/vireshk/pm:
OPP: switch to use kmemdup_array()
OPP: Add dev_pm_opp_set_level()
OPP: Use mutex locking guards
OPP: Define and use scope-based cleanup helpers
OPP: Use scope-based OF cleanup helpers
OPP: Return opp_table from dev_pm_opp_get_opp_table_ref()
OPP: Return opp from dev_pm_opp_get()
OPP: Remove _get_opp_table_kref()
|
|
KASAN reported out of bounds access - cs_dsp_ctl_cache_init_multiple_offsets().
The code uses mock_coeff_template.length_bytes (4 bytes) for register value
allocations. But later, this length is set to 8 bytes which causes
test code failures.
As fix, just remove the lenght override, keeping the original value 4
for all operations.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250523154151.1252585-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
KASAN reported out of bounds access - cs_dsp_mock_wmfw_add_info(),
because the source string length was rounded up to the allocation size.
Cc: Simon Trimmer <simont@opensource.cirrus.com>
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Cc: Richard Fitzgerald <rf@opensource.cirrus.com>
Cc: patches@opensource.cirrus.com
Cc: stable@vger.kernel.org
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Reviewed-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Link: https://patch.msgid.link/20250523155814.1256762-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
In memory bound systems, a large number of warnings for failing this
allocation repeatedly may mask any real issues in the system
during memory pressure being reported in dmesg. Change this to
warning only once.
Signed-off-by: Usama Arif <usamaarif642@gmail.com>
Reported-by: Vlad Poenaru <vlad.wing@gmail.com>
Closes: https://lore.kernel.org/all/17fab2d6-5a74-4573-bcc3-b75951508f0a@gmail.com/
Reviewed-by: Shakeel Butt <shakeel.butt@linux.dev>
Reviewed-by: SeongJae Park <sj@kernel.org>
Acked-by: Harry Yoo <harry.yoo@oracle.com>
Signed-off-by: Vlastimil Babka <vbabka@suse.cz>
|
|
Lower the I2C2 bus clock frequency on the RZ/G3E SMARC SoM from 1MHz to
400kHz to improve compatibility with a wider range of I2C peripherals.
As the GreenPAK device is programmed to operate at 400kHz, the previous
1MHz setting was too aggressive, causing it to experience timing issues.
Fixes: f7a98e256ee3 ("arm64: dts: renesas: rzg3e-smarc-som: Add I2C2 device pincontrol")
Signed-off-by: John Madieu <john.madieu.xa@bp.renesas.com>
Reviewed-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/20250518220812.1480696-1-john.madieu.xa@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
|
|
Commit 3c8260ce7663 ("mtd: rawnand: brcmnand: exec_op implementation")
removed legacy interface functions, breaking < v5.0 controllers support.
In order to fix older controllers we need to add an alternative exec_op
implementation which doesn't rely on low level registers.
Fixes: 3c8260ce7663 ("mtd: rawnand: brcmnand: exec_op implementation")
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Reviewed-by: David Regan <dregan@broadcom.com>
Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com>
Reviewed-by: William Zhang <william.zhang@broadcom.com>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
sunxi_nfc_hw_ecc_write_chunk
The function sunxi_nfc_hw_ecc_write_chunk() calls the
sunxi_nfc_hw_ecc_write_chunk(), but does not call the configuration
function sunxi_nfc_randomizer_config(). Consequently, the randomization
might not conduct correctly, which will affect the lifespan of NAND flash.
A proper implementation can be found in sunxi_nfc_hw_ecc_write_page_dma().
Add the sunxi_nfc_randomizer_config() to config randomizer.
Fixes: 4be4e03efc7f ("mtd: nand: sunxi: add randomizer support")
Cc: stable@vger.kernel.org # v4.6
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
|
|
neigh_connected_output()
Replace kfree_skb() used in neigh_resolve_output() and
neigh_connected_output() with kfree_skb_reason().
Following new skb drop reason is added:
/* failed to fill the device hard header */
SKB_DROP_REASON_NEIGH_HH_FILLFAIL
Signed-off-by: Qiu Yutan <qiu.yutan@zte.com.cn>
Signed-off-by: Jiang Kun <jiang.kun2@zte.com.cn>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Reviewed-by: Xu Xin <xu.xin16@zte.com.cn>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Use prime 3 for length to make offset slowly drift away.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Acked-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
Add new -z argument to specify max IOV size. By default, use
single large IOV.
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Reviewed-by: Mina Almasry <almasrymina@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
sendmsg() with a single iov becomes ITER_UBUF, sendmsg() with multiple
iovs becomes ITER_IOVEC. iter_iov_len does not return correct
value for UBUF, so teach to treat UBUF differently.
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Pavel Begunkov <asml.silence@gmail.com>
Cc: Mina Almasry <almasrymina@google.com>
Fixes: bd61848900bf ("net: devmem: Implement TX path")
Signed-off-by: Stanislav Fomichev <stfomichev@gmail.com>
Acked-by: Mina Almasry <almasrymina@google.com>
Reviewed-by: Pavel Begunkov <asml.silence@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
|
