summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-08-06mwifiex: improve uAP RX handlingAvinash Patil
1. Separate file for uAP RX handling. 2. If received packet is broadcast/multicast, send it to kernel as well as requeue it back to uAP TX queue. 3. If received packet is for associated STA (intra-BSS), requeue it back to uAP TX queue. 4. In all other cases (packets for AP or inter-BSS packets), pass packet to kernel to handle it accordingly. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: create list for associated stations in AP modeAvinash Patil
After station is associated an entry would be added to station list. This entry would have station specific information such as 11n support, AMSDU size. The entry would be deleted after deauthentication. All station entries would be deleted during BSS_IDLE event. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: separate file for handling AP eventsAvinash Patil
Route AP events handling to separate function defined in uap_event.c. AP specific event handling is removed from sta_event.c. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: update 11n status as per start_ap IEAvinash Patil
If HT IE is present in beacon_data of start_ap cfg80211 handler, enable 11n flag in AP. Disable 11n flag when stop_ap handler is called. Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: improve scan delay logic during Tx trafficAmitkumar Karwar
Earlier scan command was postponed by 20msec multiple times to give preference to Tx traffic until we find empty wmm queue. There is a corner case in which wmm queue becomes empty immediately after processing the packet(before 20msec) and there may be next packet coming after some time. In this case we should not resume scan operation. We will use new flag to check Tx traffic and resume scan operation only if there is no traffic for 200msec. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: update max_chan_per_scan correctly for SSID scanAmitkumar Karwar
As per recent patch "658f37b mwifiex: scan less channels..." less channels are scanned per scan command in associated state. Default number of channels per scan command for normal scan are already 4, but those are 14 for SSID specific scan operation. This code change in this patch is required for SSID specific scan. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: do le_to_cpu conversion for Rx packet header elementsAmitkumar Karwar
We do similar conversion for Tx packet header but it was missing for Rx packet header. Without this fix, Rx packet header won't be correctly parsed on big endian platform. Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: correction in MSDU padding logicYogesh Ashok Powar
Padding arithmetic will always work for MSDUs provided first MSDU ends on 4-byte boundary. Fixing it by making sure that all MSDU ends on 4-byte boundary. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: remove extra padding to AMSDUYogesh Ashok Powar
Since commit: fb3c19bc9687d972b83faf366b38ac807eca8f25, adding extra padding to AMSDU is redundant since same is being performed at mwifiex_11n_aggregate_pkt after forming the AMSDU packet. Fixing it by removing it. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06mwifiex: copy MSDU subframes correctlyYogesh Ashok Powar
All MSDU subframes, except the first one in AMSDU, were being written wrongly at the location of first MSDU frame. Fixing that by copying the MSDU at skb->tail of AMSDU. Signed-off-by: Yogesh Ashok Powar <yogeshp@marvell.com> Signed-off-by: Amitkumar Karwar <akarwar@marvell.com> Signed-off-by: Kiran Divekar <dkiran@marvell.com> Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06ath9k: fix indentation in ar9003_hw_set_power_per_rate_tableGabor Juhos
The current indentation is off by one tab. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06ath9k: optimize power level initialization for CTL_[25]GHT20Gabor Juhos
The first part of the power array is initialized in a loop and the last two values are initialized separately. Extend the loop to cover the last two items, and remove the separate initialization. Signed-off-by: Gabor Juhos <juhosg@openwrt.org> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06carl9170: Add support for NL80211_IFTYPE_MESH_POINT interfacesJavier Lopez
This patch contains following modifications: - Add mesh capabilities on fw.c to permit creation of mesh interfaces using this driver. - Modify carl9170_set_operating_mode, to use AP-style beaconing with mesh interfaces. - Allow beacon updates for NL80211_IFTYPE_MESH_POINT type in carl9170_handle_command_response. - Add NL80211_IFTYPE_MESH_POINT case on carl9170_op_add_interfaces to support mesh/ap/sta virtual interface combinations. Signed-off-by: Javier Lopez <jlopex@cozybit.com> Acked-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06b43: N-PHY: add overriding RF control for rev7+Rafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06b43: be more user friendly with PHY infoRafał Miłecki
First of all, use PHY names instead of magic numbers. It should make configuring kernel easier in case of not enabled PHY type support. Secondly, always print info about PHY. This is really basic info about hardware and quite important for the support level. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06b43: N-PHY: init 0x2057 radioRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06b43: N-PHY: finish 0x2056 radio setupRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06b43: add helper waiting for given value in radio regRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06b43: rename host flags definesRafał Miłecki
There are more than 3 registers on new hardware. Host flags handling has to be rewritten, as we can't use u128 type to handle all 5 regs. Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06p54pci: convert driver to use asynchronous firmware loadingLarry Finger
Drivers that load firmware from their probe routine have problems with the latest versions of udev as they get timeouts while waiting for user space to start. The problem is fixed by using request_firmware_nowait() and delaying the start of mac80211 until the firmware is loaded. To prevent the possibility of the driver being unloaded while the firmware loading callback is still active, a completion queue entry is used. Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Christian Lamparter <chunkeey@googlemail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06b43: N-PHY: add PHY rev7+ workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06b43: N-PHY: update workaroundsRafał Miłecki
Signed-off-by: Rafał Miłecki <zajec5@gmail.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06brcmsmac: use ieee80211_channel_to_frequencyJohannes Berg
Instead of hard-coding almost the same functionality, just use ieee80211_channel_to_frequency() directly. Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06iwlwifi: disable greenfield transmissions as a workaroundJohannes Berg
There's a bug that causes the rate scaling to get stuck when it has to use single-stream rates with a peer that can do GF and SGI; the two are incompatible so we can't use them together, but that causes the algorithm to not work at all, it always rejects updates. Disable greenfield for now to prevent that problem. Cc: stable@vger.kernel.org Reviewed-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com> Tested-by: Cesar Eduardo Barros <cesarb@cesarb.net> Signed-off-by: Johannes Berg <johannes.berg@intel.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06rt61pci: fix NULL pointer dereference in config_lna_gainStanislaw Gruszka
We can not pass NULL libconf->conf->channel to rt61pci_config() as it is dereferenced unconditionally in rt61pci_config_lna_gain() subroutine. Resolves: https://bugzilla.kernel.org/show_bug.cgi?id=44361 Cc: stable@vger.kernel.org Reported-and-tested-by: <dolohow@gmail.com> Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06cfg80211: process pending events when unregistering net deviceDaniel Drake
libertas currently calls cfg80211_disconnected() when it is being brought down. This causes an event to be allocated, but since the wdev is already removed from the rdev by the time that the event processing work executes, the event is never processed or freed. http://article.gmane.org/gmane.linux.kernel.wireless.general/95666 Fix this leak, and other possible situations, by processing the event queue when a device is being unregistered. Thanks to Johannes Berg for the suggestion. Signed-off-by: Daniel Drake <dsd@laptop.org> Cc: stable@vger.kernel.org Reviewed-by: Johannes Berg <johannes@sipsolutions.net> Signed-off-by: John W. Linville <linville@tuxdriver.com>
2012-08-06Bluetooth: Refactor in hci_le_conn_complete_evtAndre Guedes
This patch moves the hci_conn check to begining of hci_le_conn_ complete_evt in order to improve code's readability and better error handling. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Lookup hci_conn in hci_le_conn_complete_evtAndre Guedes
This patch does a trivial code refactoring in hci_conn lookup in hci_le_conn_complete_evt. It performs the hci_conn lookup at the begining of the function since it is used by both flows (error and success). Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Find hci_conn by BT_CONNECT stateAndre Guedes
This patch changes hci_cs_le_create_conn to perform hci_conn lookup by state instead of bdaddr. Since we can have only one LE connection in BT_CONNECT state, we can perform LE hci_conn lookup by state. This way, we don't rely on hci_sent_cmd_data helper to find the hci_conn object. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Refactor hci_cs_le_create_connAndre Guedes
This patch does some code refactoring in hci_cs_le_create_conn function. The hci_conn object is only needed in case of failure, therefore hdev locking and hci_conn lookup were moved to if-statement scope. Also, the conn->state check was removed since we should always close the connection if it fails. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Remove unneeded codeAndre Guedes
This patch removes some unneeded code from hci_cs_le_create_conn. If the hci_conn is not found, it means this LE connection attempt was triggered by a thrid-party tool (e.g. hcitool). We should not create this new hci_conn in LE Create Connection command status event since it is already properly handled in LE Connection Complete event. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Fix hci_le_conn_complete_evtAndre Guedes
We need to check the 'Role' parameter from the LE Connection Complete Event in order to properly set 'out' and 'link_mode' fields from hci_conn structure. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Trivial refactoringAndre Guedes
This patch replaces the unlock-and-return statements by the goto statement. Signed-off-by: Andre Guedes <andre.guedes@openbossa.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in dtl1_cs.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in btwilink.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in btusb.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in btuart_cs.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in btsdio.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in btmrvl_sdio.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in bt3c_cs.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in bpa10x.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in bluecard_cs.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in bfusb.c fileSachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Use devm_kzalloc in bcm203x.c file.Sachin Kamat
devm_kzalloc() eliminates the need to free memory explicitly thereby saving some cleanup code. Signed-off-by: Sachin Kamat <sachin.kamat@linaro.org> Acked-by: Marcel Holtmann <marcel@holtmann.org> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Added /proc/net/sco via bt_procfs_init()Masatake YAMATO
Added /proc/net/sco via bt_procfs_init(). Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Added /proc/net/rfcomm via bt_procfs_init()Masatake YAMATO
Added /proc/net/rfcomm via bt_procfs_init(). Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Added /proc/net/l2cap via bt_procfs_init()Masatake YAMATO
Added /proc/net/l2cap via bt_procfs_init(). Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Added /proc/net/hidp via bt_procfs_init()Masatake YAMATO
Added /proc/net/hidp via bt_procfs_init(). Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Added /proc/net/hci via bt_procfs_init()Masatake YAMATO
Added /proc/net/hci via bt_procfs_init(). Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2012-08-06Bluetooth: Added /proc/net/cmtp via bt_procfs_init()Masatake YAMATO
Added /proc/net/cmtp via bt_procfs_init(). Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
generated by cgit (git 2.34.1) at 2025-10-02 07:07:18 +0000