summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2025-05-06arm64: dts: rockchip: Enable regulators for Radxa E20CChukun Pan
Enable pwm and fixed regulators for Radxa E20C. The pwm regulator is used to power the CPU and GPU. Note that the LPDDR4 voltage is 1.1V. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250401120020.976343-3-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-06arm64: dts: rockchip: Add pwm nodes for RK3528Chukun Pan
Add pwm nodes for RK3528. The PWM core on RK3528 is the same as RK3328, but the driver does not support interrupts yet. Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250401120020.976343-2-amadeus@jmu.edu.cn Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-05arm64: dts: rockchip: Add onboard EEPROM for Radxa E20CYao Zi
Radxa E20C ships an onboard I2C EEPROM for storing production information. Enable it in devicetree. Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250417120118.17610-6-ziyao@disroot.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-05arm64: dts: rockchip: Add I2C controllers for RK3528Yao Zi
Describe I2C controllers shipped by RK3528 in devicetree. For I2C-2, I2C-4 and I2C-7 which come with only a set of possible pins, a default pin configuration is included. Signed-off-by: Yao Zi <ziyao@disroot.org> Reviewed-by: Jonas Karlman <jonas@kwiboo.se> Link: https://lore.kernel.org/r/20250417120118.17610-5-ziyao@disroot.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-05arm64: dts: bcm: Add reference to RPi 2 (2nd rev)Stefan Wahren
This adds a reference to the dts of the Raspberry Pi 2 (2nd rev), so we don't need to maintain the content in arm64. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250418143307.59235-4-wahrenst@gmx.net Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-05-05ARM: dts: bcm: Add support for Raspberry Pi 2 (2nd rev)Stefan Wahren
The Raspberry Pi 2 (2nd rev) has the BCM2837 SoC instead of the BCM2836. Except of this the configuration of the board is same as the predecessor (no WLAN, no BT). Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Link: https://lore.kernel.org/r/20250418143307.59235-3-wahrenst@gmx.net Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-05-05dt-bindings: arm: bcm2835: Add Raspberry Pi 2 (2nd rev)Stefan Wahren
Add the Raspberry Pi 2 (2nd rev) based on BCM2837 to DT schema. Signed-off-by: Stefan Wahren <wahrenst@gmx.net> Acked-by: Rob Herring (Arm) <robh@kernel.org> Link: https://lore.kernel.org/r/20250418143307.59235-2-wahrenst@gmx.net Signed-off-by: Florian Fainelli <florian.fainelli@broadcom.com>
2025-05-05arm64: dts: rockchip: add RK3576 RNG nodeNicolas Frattaroli
The RK3576 has a hardware random number generator IP built into the SoC. Add it to the SoC's .dtsi, now that there's a binding and driver for it. Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Link: https://lore.kernel.org/r/20250430-rk3576-hwrng-v1-3-480c15b5843e@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-05arm64: dts: renesas: r9a09g047e57-smarc: Enable CAN TransceiverBiju Das
Enable TCAN1046V-Q1 CAN Transceiver populated on RZ/G3E SMARC EVK by modelling it as two instances of tcan1042. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250320164121.193857-4-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-05-05arm64: dts: renesas: r9a09g047e57-smarc: Enable CANFDBiju Das
Enable CANFD on the RZ/G3E SMARC EVK platform. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250320164121.193857-3-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-05-05arm64: dts: renesas: r9a09g047: Add CANFD nodeBiju Das
Add CANFD node to RZ/G3E ("R9A09G047") SoC DTSI. Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250320164121.193857-2-biju.das.jz@bp.renesas.com Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-05-05arm64: dts: rockchip: Switch to undeprecated qcom,calibration-variant on RK3399Krzysztof Kozlowski
The property qcom,ath10k-calibration-variant was deprecated in favor of recently introduced generic qcom,calibration-variant, common to all Qualcomm Atheros WiFi bindings. Change will affect out of tree users, like other projects, of this DTS. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Link: https://lore.kernel.org/r/20250501160208.96451-2-krzysztof.kozlowski@linaro.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-05arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-quartz64-bDiederik de Haas
The Quartz64 Model B has a Winbound 25Q64DWZPIG SPI flash chip, identified as 'U13' on the component placement schematic. In the Quartz 64 Model-B Schematic from 20220124 on page 17, we can see that the VCC connector is connected to VCCIO_FLASH and page 4 shows that that in turn is connected to the VCCIO2 domain. That domain uses vcc_1v8 as its power source. This fixes the following warning: spi-nor spi4.0: supply vcc not found, using dummy regulator Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20250503152917.138648-3-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-05arm64: dts: rockchip: Add phy-supply to gmac0 on NanoPi R5SDiederik de Haas
According to paragraph "7.16. Power" of the RTL8211F-CG datasheet, gmac0 needs to have a 3.3V power supply. On page 22 of the NanoPi R5S version 2204, that is identified as VCC_GEPHY_3V3 which is connected to the VCC_3V3 power source. This fixes the following warning: rk_gmac-dwmac fe2a0000.ethernet: supply phy not found, using dummy regulator Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20250503152917.138648-2-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-05ARM: dts: rockchip: enable Mali gpu on rk3066 marsboardHeiko Stuebner
The rk3066 contains a Mali400 GPU, so enable it. There is no individual (or even controllable) supply for the GPU on the board. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250503201043.990933-3-heiko@sntech.de
2025-05-05ARM: dts: rockchip: enable hdmi on rk3066 marsboardHeiko Stuebner
The marsboard does have a regular hdmi-a connector and can simply use the already existing infrastructure (rk3066-hdmi) for display output. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250503201043.990933-2-heiko@sntech.de
2025-05-05Revert "ARM: dts: rockchip: drop grf reference from rk3036 hdmi"Andy Yan
This reverts commit 1580ccb6ed9dc76b8ff3e2d8912e8215c8b0fa6d. The HSYNC/VSYNC polarity of rk3036 HDMI are controlled by GRF. Without the polarity configuration in GRF, it can be observed from the HDMI protocol analyzer that the H/V front/back timing output by RK3036 HDMI are currently not in line with the specifications. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin Link: https://lore.kernel.org/r/20250422070455.432666-7-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-05ARM: dts: rockchip: Add ref clk for hdmiAndy Yan
The RK3036 HDMI DDC bus requires it's PHY's reference clock to be enabled first before normal DDC communication can be carried out. Signed-off-by: Andy Yan <andy.yan@rock-chips.com> Tested-by: Heiko Stuebner <heiko@sntech.de> #rk3036-kylin Link: https://lore.kernel.org/r/20250422070455.432666-6-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-01arm64: dts: rockchip: fix usb-c port functionality on rk3588-nanopc-t6John Clark
The USB-C port on the NanoPC-T6 was not providing VBUS (vbus5v0_typec regulator disabled, gpio-58 out lo) due to misconfiguration. The original setup with regulator-always-on and regulator-boot-on forced the port on, masking the issue, but removing these properties revealed that the fusb302 driver was not enabling the regulator dynamically. Changes: - Removed regulator-always-on and regulator-boot-on from vbus5v0_typec and vbus5v0_usb to allow driver control. - Changed power-role from "source" to "dual" in the usb-c-connector to support OTG functionality. - Added pd-revision = /bits/ 8 <0x2 0x0 0x1 0x2> to the FUSB302MPX node to specify USB Power Delivery (PD) Revision 2.0, Version 1.2, ensuring the driver correctly advertises PD capabilities and negotiates power roles (source/sink). - Added op-sink-microwatt and sink-pdos for proper sink mode configuration (1W min, 15W max). - Added typec-power-opmode = "1.5A" to enable 1.5A fallback for non-PD USB-C devices, aligning with the 5V/2A hardware limit. - Set try-power-role to "source" to prioritize VBUS enablement. - Adjusted usb_host0_xhci dr_mode from "host" to "otg" and added usb-role-switch for dual-role support. Testing: - Verified VBUS (5V) delivery to a sink device (USB thumb drive). - Confirmed USB host mode with lsusb detecting connected devices. - Validated USB device mode with adb devices when connected to a PC. - Tested dual-role (OTG) functionality with try-power-role set to "source" and "sink"; "source" prioritizes faster VBUS activation. - Validated functionality with a mobile device, including USB Power Delivery, file transfer, USB tethering, MIDI, and image transfer. - Tested USB-C Ethernet adapter compatibility in host mode. - Tested USB-C hub compatibility in host mode. Signed-off-by: John Clark <inindev@gmail.com> Link: https://lore.kernel.org/r/20250422210345.196050-1-inindev@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-01arm64: dts: rockchip: Enable bluetooth of AP6611s on OrangePI5 Max/UltraJimmy Hon
Orange Pi 5 Max and Ultra has onboard AP6611s with Bluetooth 5.3 connected via UART7. The chip reports as: [ 3.747864] Bluetooth: hci0: BCM: chip id 3 [ 3.750021] Bluetooth: hci0: BCM: features 0x0f [ 3.775923] Bluetooth: hci0: SYN43711A0 [ 3.775930] Bluetooth: hci0: BCM (001.001.030) build 0000 Signed-off-by: Jimmy Hon <honyuenkwun@gmail.com> Link: https://lore.kernel.org/r/20250427182019.1862-1-honyuenkwun@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-05-01arm64: dts: apple: Add PMIC NVMEMHector Martin
Add device tree entries for NVMEM cells present on the PMIC Signed-off-by: Hector Martin <marcan@marcan.st> Reviewed-by: Nick Chan <towinchenmi@gmail.com> Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io> Co-developed-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com> Reviewed-by: Neal Gompa <neal@gompa.dev> Link: https://lore.kernel.org/r/20250423-spmi-nvmem-v3-3-2985aa722ddc@gmail.com Signed-off-by: Sven Peter <sven@svenpeter.dev>
2025-04-29arm64: dts: rockchip: add SATA nodes to RK3576Nicolas Frattaroli
The Rockchip RK3576 features two SATA nodes. The first, sata0, is behind combphy0, which muxes between pcie0 and sata0. The second, sata1, is behind combphy1, which muxes between pcie1, sata1 and usb_drd1_dwc3. I've only been able to test sata0 on my board, but it appears to work just fine. Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Link: https://lore.kernel.org/r/20250424-rk3576-sata-v1-2-23ee89c939fe@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3588-rock-5bDiederik de Haas
The Radxa Rock 5B component placement document identifies the SPI Nor Flash chip as 'U4300' which is described on page 25 of the Schematic v1.45. There we can see that the VCC connector is connected to the VCC_3V3_S3 power source. This fixes the following warning: spi-nor spi5.0: supply vcc not found, using dummy regulator Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20250425092601.56549-5-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-pinetab2Diederik de Haas
As described on page 37 of PineTab2 Schematic-20230417, the SPI Flash's VCC connector is connected to VCCIO_FLASH and according to page 6 of that same schematic, that belongs to the VCC_1V8 power source. This fixes the following warning: spi-nor spi4.0: supply vcc not found, using dummy regulator Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20250425092601.56549-4-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-rockpro64Diederik de Haas
As described on page 16 of the RockPro64 schematics for both v2.0 and v2.1, the SPI Flash's VCC connector is connected to the VCC_3V0 power source. This fixes the following warning: spi-nor spi1.0: supply vcc not found, using dummy regulator Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20250425092601.56549-3-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3328-rock64Diederik de Haas
As described on page 6 of the Rock64 schematics for both v2.0 and v3.0 the SPI Flash's VCC connector is connected to the VCC_IO power source. This fixes the following warning: spi-nor spi0.0: supply vcc not found, using dummy regulator Signed-off-by: Diederik de Haas <didi.debian@cknow.org> Link: https://lore.kernel.org/r/20250425092601.56549-2-didi.debian@cknow.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add vcc supply to spi flash on rk3399-roc-pcMarkus Reichl
Add vcc supply to the spi-nor flash chip on rk3399-roc-pc boards according to the board schematics ROC-3399-PC-V10-A-20180804 to avoid warnings in dmesg output. Signed-off-by: Markus Reichl <m.reichl@fivetechno.de> Link: https://lore.kernel.org/r/20250411140223.1069-1-m.reichl@fivetechno.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: enable pcie on Sige5Nicolas Frattaroli
The ArmSoM Sige5 board exposes PCIe controller 0 on its M.2 slot on the bottom of the board. Enable the necessary nodes for it, and also add the correct pins for both the power enable GPIO and the PCIe reset GPIO. Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Link: https://lore.kernel.org/r/20250414-rk3576-sige5-pcie-v1-1-0e950a96f392@collabora.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add HDMI support for roc-rk3576-pcHeiko Stuebner
Enable HDMI and VOP nodes for the roc-rk3576-pc board. Signed-off-by: Heiko Stuebner <heiko@sntech.de> Link: https://lore.kernel.org/r/20250414183745.1352470-1-heiko@sntech.de
2025-04-28arm64: dts: rockchip: Enable HDMI0 audio output for Indiedroid NovaChris Morgan
Make available HDMI audio for the HDMI0 port. Signed-off-by: Chris Morgan <macromorgan@hotmail.com> Link: https://lore.kernel.org/r/20250415174711.72891-1-macroalpha82@gmail.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add rk3588 evb2 boardChaoyi Chen
General features for rk3588 evb2 board: - Rockchip RK3588 - LPDDR4/4X - eMMC5.1 - RK806-2x2pcs + DiscretePower - 1x HDMI2.1 TX / HDMI2.0 RX - 1x full size DisplayPort - 3x USB3.0 Host - 1x USB2.0 Host - WIFI/BT Tested with HDMI/GPU/USB2.0/USB3.0/WIFI module. Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com> Link: https://lore.kernel.org/r/20250418014757.336-3-kernel@airkyi.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28dt-bindings: arm: rockchip: Add rk3588 evb2 boardChaoyi Chen
Add devicetree binding for the rk3588 evb2 board. Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com> Acked-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250418014757.336-2-kernel@airkyi.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add pcie1 slot for rk3576 evb1 boardShawn Lin
PCIe1 and usb_drd1_dwc3 is sharing the same PHY on RK3576 platform. For pcie1 slot and USB interface, there is a swich IC labelled as Dial_Switch_1 on evb1 board. If we need to make pcie1 slot work for this board, we should first disable usb_drd1_dwc3 and then set Dial_Switch_1 to low state. Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> Link: https://lore.kernel.org/r/1745371359-30443-1-git-send-email-shawn.lin@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Enable eDP display for Cool Pi GenBookAndy Yan
Cool Pi CM5 GenBook equipped with a 1080P eDP panel, the panel connected on board with 30/40 pin connector. There is no hpd hooked up on the board, so we need to set hpd-absent-delay-ms in dts. Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20250426071554.1305042-2-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add eDP1 dt node for rk3588Andy Yan
Add eDP1 dt node for RK3588 SoC Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20250426071554.1305042-1-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: enable HDMI out audio on Khadas Edge2Jacobe Zang
Enable HDMI out audio on the Khadas Edge2. Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> Link: https://lore.kernel.org/r/20250424-edge-v1-3-314aad01d9ab@wesion.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add HDMI & VOP2 to Khadas Edge2Jacobe Zang
Enable HDMI display output on Khadas Edge2. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> Link: https://lore.kernel.org/r/20250424-edge-v1-2-314aad01d9ab@wesion.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: Add bluetooth support to Khadas Edge2Jacobe Zang
This commit adds the RTS signal, specifies the compatible Broadcom chip, its clock source, interrupts, GPIOs for wakeup and shutdown, maximum speed, pinctrl settings, and power supplies. Signed-off-by: Muhammed Efe Cetin <efectn@protonmail.com> Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com> Link: https://lore.kernel.org/r/20250424-edge-v1-1-314aad01d9ab@wesion.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-28arm64: dts: rockchip: add overlay for tiger-haikou video-demo adapterHeiko Stuebner
This adds support for the video-demo-adapter DEVKIT ADDON CAM-TS-A01 (https://embedded.cherry.de/product/development-kit/) for the Haikou devkit with Tiger RK3588 SoM. The Video Demo adapter is an adapter connected to the fake PCIe slot labeled "Video Connector" on the Haikou devkit. It's main feature is a Leadtek DSI-display with touchscreen and a camera (that is not supported yet). To drive these components a number of additional regulators are grouped on the adapter as well as a PCA9670 gpio-expander to provide the needed additional gpio-lines. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Dragan Simic <dsimic@manjaro.org> # Makefile Tested-by: Quentin Schulz <quentin.schulz@cherry.de> Link: https://lore.kernel.org/r/20250226140942.3825223-4-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-26ARM: dts: rockchip: Drop redundant CPU "clock-latency"Rob Herring (Arm)
The "clock-latency" property is part of the deprecated opp-v1 binding and is redundant if the opp-v2 table has equal or larger values in any "clock-latency-ns". Add any missing "clock-latency-ns" properties and remove "clock-latency". Signed-off-by: "Rob Herring (Arm)" <robh@kernel.org> Link: https://lore.kernel.org/r/20250410-dt-cpu-schema-v2-10-63d7dc9ddd0a@kernel.org Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-26arm64: dts: rockchip: add dsi controller nodes on rk3588Heiko Stuebner
The RK3588 comes with two DSI2 controllers based on a new Synopsis IP. Add the necessary nodes for them. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # RK3588 EVB1 Link: https://lore.kernel.org/r/20250226140942.3825223-3-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-26arm64: dts: rockchip: add mipi dcphy nodes to rk3588Heiko Stuebner
Add the two MIPI-DC-phy nodes to the RK3588, that will be used by the DSI2 controllers and hopefully in some future also for camera input. Signed-off-by: Heiko Stuebner <heiko.stuebner@cherry.de> Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com> Tested-by: Sebastian Reichel <sebastian.reichel@collabora.com> # RK3588 EVB1 Link: https://lore.kernel.org/r/20250226140942.3825223-2-heiko@sntech.de Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-24arm64: dts: renesas: r8a779h0: Add ISP core function blockNiklas Söderlund
The first ISP instance on V4M has both a channel select and core function block, describe the core region in addition to the existing cs region. While at it update the second ISP to match the new bindings and add the reg-names and interrupt-names property. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250423163113.2961049-5-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-24arm64: dts: renesas: r8a779g0: Add ISP core function blockNiklas Söderlund
All ISP instances on V4H have both a channel select and core function block, describe the core region in addition to the existing cs region. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250423163113.2961049-4-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-24arm64: dts: renesas: r8a779a0: Add ISP core function blockNiklas Söderlund
All ISP instances on V3U have both a channel select and core function block, describe the core region in addition to the existing cs region. The interrupt number already described intended to reflect the cs function but did incorrectly describe the core block. This was not noticed until now as the driver do not make use of the interrupt for the cs block. Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Reviewed-by: Jacopo Mondi <jacopo.mondi@ideasonboard.com> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250423163113.2961049-3-niklas.soderlund+renesas@ragnatech.se Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-24arm64: dts: renesas: r8a779g3: Add Retronix R-Car V4H Sparrow Hawk board supportMarek Vasut
Add Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0 (R8A779G3) SoC. This is a single-board computer with single gigabit ethernet, DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports, micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD, debug UART and JTAG. Tested-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250420173829.200553-4-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-24dt-bindings: soc: renesas: Document Retronix R-Car V4H Sparrow Hawk board ↵Marek Vasut
support Document Retronix R-Car V4H Sparrow Hawk board based on Renesas R-Car V4H ES3.0 (R8A779G3) SoC. This is a single-board computer with single gigabit ethernet, DSI-to-eDP bridge, DSI and two CSI2 interfaces, audio codec, two CANFD ports, micro SD card slot, USB PD supply, USB 3.0 ports, M.2 Key-M slot for NVMe SSD, debug UART and JTAG. Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Link: https://lore.kernel.org/20250420173829.200553-3-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-24dt-bindings: vendor-prefixes: Add Retronix Technology Inc.Marek Vasut
Add vendor prefix for Retronix Technology Inc. https://www.retronix.com.tw/en/about.html Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Tested-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> Link: https://lore.kernel.org/20250420173829.200553-2-marek.vasut+renesas@mailbox.org Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2025-04-22arm64: dts: rockchip: Add rk3576 pcie nodesKever Yang
rk3576 has two pcie controllers, both are pcie2x1 work with naneng-combphy. Signed-off-by: Kever Yang <kever.yang@rock-chips.com> Tested-by: Shawn Lin <Shawn.lin@rock-chips.com> Reviewed-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com> Link: https://lore.kernel.org/r/20250414145110.11275-3-kever.yang@rock-chips.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
2025-04-22arm64: dts: rockchip: Enable HDMI audio outputs for Cool Pi CM5 EVBAndy Yan
Enable audio outputs for two HDMI ports on Cool Pi CM5 EVB Signed-off-by: Andy Yan <andyshrk@163.com> Link: https://lore.kernel.org/r/20250419121326.388298-3-andyshrk@163.com Signed-off-by: Heiko Stuebner <heiko@sntech.de>
generated by cgit (git 2.34.1) at 2025-09-11 11:31:02 +0000