summaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-12-19sfc: remove efx_writed_page_lockedAndy Moreton
From: Andy Moreton <andy.moreton@amd.com> efx_writed_page_locked is a workaround for Siena hardware that is not needed on later adapters, and has no callers. Remove it. Signed-off-by: Andy Moreton <andy.moreton@amd.com> Signed-off-by: Edward Cree <ecree.xilinx@gmail.com> Link: https://patch.msgid.link/20241218135930.2350358-1-edward.cree@amd.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: stmmac: Drop useless code related to ethtool rx-copybreakFurong Xu
After commit 2af6106ae949 ("net: stmmac: Introducing support for Page Pool"), the driver always copies frames to get a better performance, zero-copy for RX frames is no more, then these code turned to be useless and users of ethtool may get confused about the unhandled rx-copybreak parameter. This patch mostly reverts commit 22ad38381547 ("stmmac: do not perform zero-copy for rx frames") Signed-off-by: Furong Xu <0x1207@gmail.com> Link: https://patch.msgid.link/20241218083407.390509-1-0x1207@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: Document netmem driver supportMina Almasry
Document expectations from drivers looking to add support for device memory tcp or other netmem based features. Signed-off-by: Mina Almasry <almasrymina@google.com> Reviewed-by: Bagas Sanjaya <bagasdotme@gmail.com> Reviewed-by: Shannon Nelson <shannon.nelson@amd.com> Link: https://patch.msgid.link/20241217201206.2360389-1-almasrymina@google.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: airoha: Fix error path in airoha_probe()Lorenzo Bianconi
Do not run napi_disable() if airoha_hw_init() fails since Tx/Rx napi has not been started yet. In order to fix the issue, introduce airoha_qdma_stop_napi routine and remove napi_disable in airoha_hw_cleanup(). Fixes: 23020f049327 ("net: airoha: Introduce ethernet support for EN7581 SoC") Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org> Link: https://patch.msgid.link/20241216-airoha_probe-error-path-fix-v2-1-6b10e04e9a5c@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge branch 'net-add-and-use-phy_disable_eee'Jakub Kicinski
Heiner Kallweit says: ==================== net: add and use phy_disable_eee If a MAC driver doesn't support EEE, then the PHY shouldn't advertise it. Add phy_disable_eee() for this purpose, and use it in cpsw driver. ==================== Link: https://patch.msgid.link/5139374e-7151-4d0d-8ba9-9ec3d9b52f67@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: ethernet: ti: cpsw: disable PHY EEE advertisementHeiner Kallweit
It seems the cpsw MAC doesn't support EEE. See e.g. the commit message of ce2899428ec0 ("ARM: dts: am335x-baltos: disable EEE for Atheros 8035 PHY"). There are cases where this causes issues if the PHY's on both sides have negotiated EEE. As a workaround EEE modes of the PHY are marked broken in DT, effectively disabling EEE advertisement. Improve this by using new function phy_disable_eee() in the MAC driver. This properly disables EEE advertisement, and allows to remove the eee-broken-xxx properties from DT. As EEE is disabled anyway, we can remove also the set_eee ethtool op. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/d08a798e-8565-422c-b2ed-121794db077f@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: phy: add phy_disable_eeeHeiner Kallweit
If a MAC driver doesn't support EEE, then the PHY shouldn't advertise it. Add phy_disable_eee() for this purpose. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/fd51738c-dcd6-4d61-b8c5-faa6ac0f1026@gmail.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge tag 'wireless-next-2024-12-19' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next Kalle Valo says: ==================== wireless-next patches for v6.14 Multi-Link Operation implementation continues, both in stack and in drivers. Otherwise it has been relatively quiet. Major changes: cfg80211/mac80211 - define wiphy guard - get TX power per link - EHT 320 MHz channel support for mesh ath11k - QCA6698AQ support ath9k - RX inactivity detection rtl8xxxu - add more USB device IDs rtw88 - add more USB device IDs - enable USB RX aggregation and USB 3 to improve performance rtw89 - PowerSave flow for Multi-Link Operation * tag 'wireless-next-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (121 commits) wifi: wlcore: sysfs: constify 'struct bin_attribute' wifi: brcmfmac: clarify unmodifiable headroom log message wifi: brcmfmac: add missing header include for brcmf_dbg wifi: brcmsmac: add gain range check to wlc_phy_iqcal_gainparams_nphy() wifi: qtnfmac: fix spelling error in core.h wifi: rtw89: phy: add dummy C2H event handler for report of TAS power wifi: rtw89: 8851b: rfk: remove unnecessary assignment of return value of _dpk_dgain_read() wifi: rtw89: 8852c: rfk: refine target channel calculation in _rx_dck_channel_calc() wifi: rtlwifi: pci: wait for firmware loading before releasing memory wifi: rtlwifi: fix memory leaks and invalid access at probe error path wifi: rtlwifi: destroy workqueue at rtl_deinit_core wifi: rtlwifi: remove unused check_buddy_priv wifi: rtw89: 8922a: update format of RFK pre-notify H2C command v2 wifi: rtw89: regd: update regulatory map to R68-R51 wifi: rtw89: 8852c: disable ER SU when 4x HE-LTF and 0.8 GI capability differ wifi: rtw89: disable firmware training HE GI and LTF wifi: rtw89: ps: update data for firmware and settings for hardware before/after PS wifi: rtw89: ps: refactor channel info to firmware before entering PS wifi: rtw89: ps: refactor PS flow to support MLO wifi: mwifiex: decrease timeout waiting for host sleep from 10s to 5s ... ==================== Link: https://patch.msgid.link/20241219185709.774EDC4CECE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge tag 'wireless-2024-12-19' of ↵Jakub Kicinski
git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless Kalle Valo says: ==================== wireless fixes for v6.13-rc5 Few minor fixes this time, nothing special. * tag 'wireless-2024-12-19' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless: wifi: cw1200: Fix potential NULL dereference wifi: iwlwifi: mvm: Fix __counted_by usage in cfg80211_wowlan_nd_* MAINTAINERS: wifi: ath: add Jeff Johnson as maintainer wifi: iwlwifi: fix CRF name for Bz ==================== Link: https://patch.msgid.link/20241219185042.662B6C4CECE@smtp.kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: netlink: catch attempts to send empty messagesJakub Kicinski
syzbot can figure out a way to redirect a netlink message to a tap. Sending empty skbs to devices is not valid and we end up hitting a skb_assert_len() in __dev_queue_xmit(). Make catching these mistakes easier, assert the skb size directly in netlink core. Reviewed-by: Eric Dumazet <edumazet@google.com> Link: https://patch.msgid.link/20241218024400.824355-1-kuba@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: dsa: microchip: Add suspend/resume support to KSZ DSA driverTristram Ha
The KSZ DSA driver starts a timer to read MIB counters periodically to avoid count overrun. During system suspend this will give an error for not able to write to register as the SPI system returns an error when it is in suspend state. This implementation stops the timer when the system goes into suspend and restarts it when resumed. Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241218020311.70628-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19Merge branch ↵Jakub Kicinski
'net-dsa-microchip-fix-set_ageing_time-function-for-ksz9477-and-lan937x-switches' Tristram Ha says: ==================== net: dsa: microchip: Fix set_ageing_time function for KSZ9477 and LAN937X switches The aging count is not a simple number that is broken into two parts and programmed into 2 registers. These patches correct the programming for KSZ9477 and LAN937X switches. ==================== Link: https://patch.msgid.link/20241218020224.70590-1-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: dsa: microchip: Fix LAN937X set_ageing_time functionTristram Ha
The aging count is not a simple 20-bit value but comprises a 3-bit multiplier and a 20-bit second time. The code tries to use the original multiplier which is 4 as the second count is still 300 seconds by default. As the 20-bit number is now too large for practical use there is an option to interpret it as microseconds instead of seconds. Fixes: 2c119d9982b1 ("net: dsa: microchip: add the support for set_ageing_time") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241218020224.70590-3-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: dsa: microchip: Fix KSZ9477 set_ageing_time functionTristram Ha
The aging count is not a simple 11-bit value but comprises a 3-bit multiplier and an 8-bit second count. The code tries to use the original multiplier which is 4 as the second count is still 300 seconds by default. Fixes: 2c119d9982b1 ("net: dsa: microchip: add the support for set_ageing_time") Signed-off-by: Tristram Ha <tristram.ha@microchip.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Link: https://patch.msgid.link/20241218020224.70590-2-Tristram.Ha@microchip.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20drm: adv7511: Drop dsi single lane supportBiju Das
As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane. [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Reported-by: Hien Huynh <hien.huynh.px@renesas.com> Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Reviewed-by: Adam Ford <aford173@gmail.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-4-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-20dt-bindings: display: adi,adv7533: Drop single lane supportBiju Das
As per [1] and [2], ADV7535/7533 supports only 2-, 3-, or 4-lane. Drop unsupported 1-lane from bindings. [1] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7535.pdf [2] https://www.analog.com/media/en/technical-documentation/data-sheets/ADV7533.pdf Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Cc: stable@vger.kernel.org Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be> Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-3-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-20drm: adv7511: Fix use-after-free in adv7533_attach_dsi()Biju Das
The host_node pointer was assigned and freed in adv7533_parse_dt(), and later, adv7533_attach_dsi() uses the same. Fix this use-after-free issue by dropping of_node_put() in adv7533_parse_dt() and calling of_node_put() in error path of probe() and also in the remove(). Fixes: 1e4d58cd7f88 ("drm/bridge: adv7533: Create a MIPI DSI device") Cc: stable@vger.kernel.org Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com> Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com> Link: https://patchwork.freedesktop.org/patch/msgid/20241119192040.152657-2-biju.das.jz@bp.renesas.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-20drm/bridge: adv7511_audio: Update Audio InfoFrame properlyStefan Ekenberg
AUDIO_UPDATE bit (Bit 5 of MAIN register 0x4A) needs to be set to 1 while updating Audio InfoFrame information and then set to 0 when done. Otherwise partially updated Audio InfoFrames could be sent out. Two cases where this rule were not followed are fixed: - In adv7511_hdmi_hw_params() make sure AUDIO_UPDATE bit is updated before/after setting ADV7511_REG_AUDIO_INFOFRAME. - In audio_startup() use the correct register for clearing AUDIO_UPDATE bit. The problem with corrupted audio infoframes were discovered by letting a HDMI logic analyser check the output of ADV7535. Note that this patchs replaces writing REG_GC(1) with REG_INFOFRAME_UPDATE. Bit 5 of REG_GC(1) is positioned within field GC_PP[3:0] and that field doesn't control audio infoframe and is read- only. My conclusion therefore was that the author if this code meant to clear bit 5 of REG_INFOFRAME_UPDATE from the very beginning. Tested-by: Biju Das <biju.das.jz@bp.renesas.com> Fixes: 53c515befe28 ("drm/bridge: adv7511: Add Audio support") Signed-off-by: Stefan Ekenberg <stefan.ekenberg@axis.com> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241119-adv7511-audio-info-frame-v4-1-4ae68e76c89c@axis.com Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
2024-12-19KVM: x86/mmu: Treat TDP MMU faults as spurious if access is already allowedSean Christopherson
Treat slow-path TDP MMU faults as spurious if the access is allowed given the existing SPTE to fix a benign warning (other than the WARN itself) due to replacing a writable SPTE with a read-only SPTE, and to avoid the unnecessary LOCK CMPXCHG and subsequent TLB flush. If a read fault races with a write fault, fast GUP fails for any reason when trying to "promote" the read fault to a writable mapping, and KVM resolves the write fault first, then KVM will end up trying to install a read-only SPTE (for a !map_writable fault) overtop a writable SPTE. Note, it's not entirely clear why fast GUP fails, or if that's even how KVM ends up with a !map_writable fault with a writable SPTE. If something else is going awry, e.g. due to a bug in mmu_notifiers, then treating read faults as spurious in this scenario could effectively mask the underlying problem. However, retrying the faulting access instead of overwriting an existing SPTE is functionally correct and desirable irrespective of the WARN, and fast GUP _can_ legitimately fail with a writable VMA, e.g. if the Accessed bit in primary MMU's PTE is toggled and causes a PTE value mismatch. The WARN was also recently added, specifically to track down scenarios where KVM is unnecessarily overwrites SPTEs, i.e. treating the fault as spurious doesn't regress KVM's bug-finding capabilities in any way. In short, letting the WARN linger because there's a tiny chance it's due to a bug elsewhere would be excessively paranoid. Fixes: 1a175082b190 ("KVM: x86/mmu: WARN and flush if resolving a TDP MMU fault clears MMU-writable") Reported-by: Lei Yang <leiyang@redhat.com> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=219588 Tested-by: Lei Yang <leiyang@redhat.com> Link: https://lore.kernel.org/r/20241218213611.3181643-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-12-19KVM: SVM: Allow guest writes to set MSR_AMD64_DE_CFG bitsSean Christopherson
Drop KVM's arbitrary behavior of making DE_CFG.LFENCE_SERIALIZE read-only for the guest, as rejecting writes can lead to guest crashes, e.g. Windows in particular doesn't gracefully handle unexpected #GPs on the WRMSR, and nothing in the AMD manuals suggests that LFENCE_SERIALIZE is read-only _if it exists_. KVM only allows LFENCE_SERIALIZE to be set, by the guest or host, if the underlying CPU has X86_FEATURE_LFENCE_RDTSC, i.e. if LFENCE is guaranteed to be serializing. So if the guest sets LFENCE_SERIALIZE, KVM will provide the desired/correct behavior without any additional action (the guest's value is never stuffed into hardware). And having LFENCE be serializing even when it's not _required_ to be is a-ok from a functional perspective. Fixes: 74a0e79df68a ("KVM: SVM: Disallow guest from changing userspace's MSR_AMD64_DE_CFG value") Fixes: d1d93fa90f1a ("KVM: SVM: Add MSR-based feature support for serializing LFENCE") Reported-by: Simon Pilkington <simonp.git@mailbox.org> Closes: https://lore.kernel.org/all/52914da7-a97b-45ad-86a0-affdf8266c61@mailbox.org Cc: Tom Lendacky <thomas.lendacky@amd.com> Cc: stable@vger.kernel.org Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Link: https://lore.kernel.org/r/20241211172952.1477605-1-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-12-19KVM: x86: Play nice with protected guests in complete_hypercall_exit()Sean Christopherson
Use is_64_bit_hypercall() instead of is_64_bit_mode() to detect a 64-bit hypercall when completing said hypercall. For guests with protected state, e.g. SEV-ES and SEV-SNP, KVM must assume the hypercall was made in 64-bit mode as the vCPU state needed to detect 64-bit mode is unavailable. Hacking the sev_smoke_test selftest to generate a KVM_HC_MAP_GPA_RANGE hypercall via VMGEXIT trips the WARN: ------------[ cut here ]------------ WARNING: CPU: 273 PID: 326626 at arch/x86/kvm/x86.h:180 complete_hypercall_exit+0x44/0xe0 [kvm] Modules linked in: kvm_amd kvm ... [last unloaded: kvm] CPU: 273 UID: 0 PID: 326626 Comm: sev_smoke_test Not tainted 6.12.0-smp--392e932fa0f3-feat #470 Hardware name: Google Astoria/astoria, BIOS 0.20240617.0-0 06/17/2024 RIP: 0010:complete_hypercall_exit+0x44/0xe0 [kvm] Call Trace: <TASK> kvm_arch_vcpu_ioctl_run+0x2400/0x2720 [kvm] kvm_vcpu_ioctl+0x54f/0x630 [kvm] __se_sys_ioctl+0x6b/0xc0 do_syscall_64+0x83/0x160 entry_SYSCALL_64_after_hwframe+0x76/0x7e </TASK> ---[ end trace 0000000000000000 ]--- Fixes: b5aead0064f3 ("KVM: x86: Assume a 64-bit hypercall for guests with protected state") Cc: stable@vger.kernel.org Cc: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Nikunj A Dadhania <nikunj@amd.com> Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com> Reviewed-by: Binbin Wu <binbin.wu@linux.intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Link: https://lore.kernel.org/r/20241128004344.4072099-2-seanjc@google.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-12-19KVM: SVM: Disable AVIC on SNP-enabled system without HvInUseWrAllowed featureSuravee Suthikulpanit
On SNP-enabled system, VMRUN marks AVIC Backing Page as in-use while the guest is running for both secure and non-secure guest. Any hypervisor write to the in-use vCPU's AVIC backing page (e.g. to inject an interrupt) will generate unexpected #PF in the host. Currently, attempt to run AVIC guest would result in the following error: BUG: unable to handle page fault for address: ff3a442e549cc270 #PF: supervisor write access in kernel mode #PF: error_code(0x80000003) - RMP violation PGD b6ee01067 P4D b6ee02067 PUD 10096d063 PMD 11c540063 PTE 80000001149cc163 SEV-SNP: PFN 0x1149cc unassigned, dumping non-zero entries in 2M PFN region: [0x114800 - 0x114a00] ... Newer AMD system is enhanced to allow hypervisor to modify the backing page for non-secure guest on SNP-enabled system. This enhancement is available when the CPUID Fn8000_001F_EAX bit 30 is set (HvInUseWrAllowed). This table describes AVIC support matrix w.r.t. SNP enablement: | Non-SNP system | SNP system ----------------------------------------------------- Non-SNP guest | AVIC Activate | AVIC Activate iff | | HvInuseWrAllowed=1 ----------------------------------------------------- SNP guest | N/A | Secure AVIC Therefore, check and disable AVIC in kvm_amd driver when the feature is not available on SNP-enabled system. See the AMD64 Architecture Programmer’s Manual (APM) Volume 2 for detail. (https://www.amd.com/content/dam/amd/en/documents/processor-tech-docs/ programmer-references/40332.pdf) Fixes: 216d106c7ff7 ("x86/sev: Add SEV-SNP host initialization support") Signed-off-by: Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Link: https://lore.kernel.org/r/20241104075845.7583-1-suravee.suthikulpanit@amd.com Signed-off-by: Sean Christopherson <seanjc@google.com>
2024-12-19Merge branch 'bnxt_en-driver-update'Jakub Kicinski
Michael Chan says: ==================== bnxt_en: Driver update The first patch configures context memory for RoCE resources based on FW limits. The next 4 patches restrict certain ethtool operations when they are not supported. The last patch adds Pavan Chebbi as co-maintainer of the driver. v1: https://lore.kernel.org/20241215205943.2341612-1-michael.chan@broadcom.com ==================== Link: https://patch.msgid.link/20241217182620.2454075-1-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19MAINTAINERS: bnxt_en: Add Pavan Chebbi as co-maintainerMichael Chan
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-7-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Skip reading PXP registers during ethtool -d if unsupportedMichael Chan
Newer firmware does not allow reading the PXP registers during ethtool -d, so skip the firmware call in that case. Userspace (bnxt.c) always expects the register block to be populated so zeroes will be returned instead. Reviewed-by: Ajit Khaparde <ajit.khaparde@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Somnath Kotur <somnath.kotur@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-6-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Skip MAC loopback selftest if it is unsupported by FWMichael Chan
Call the new HWRM_PORT_MAC_QCAPS to check if mac loopback is supported. Skip the MAC loopback ethtool self test if it is not supported. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Andy Gospodarek <andrew.gospodarek@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com> Link: https://patch.msgid.link/20241217182620.2454075-5-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Skip PHY loopback ethtool selftest if unsupported by FWMichael Chan
Skip PHY loopback selftest if firmware advertises that it is unsupported in the HWRM_PORT_PHY_QCAPS call. Only show PHY loopback test result to be 0 if the test has run and passes. Do the same for external loopback to be consistent. Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-4-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Do not allow ethtool -m on an untrusted VFMichael Chan
Block all ethtool module operations on an untrusted VF. The firmware won't allow it and will return error. Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-3-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19bnxt_en: Use FW defined resource limits for RoCEHongguang Gao
If FW supports setting resource limits for RoCE, then just use the FW limits instead of using some fixed values in the driver. These limits will be used to allocate context memory for QP, SRQ, AH, and MR resources for RoCE. Reviewed-by: Damodharam Ammepalli <damodharam.ammepalli@broadcom.com> Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com> Signed-off-by: Hongguang Gao <hongguang.gao@broadcom.com> Signed-off-by: Selvin Xavier <selvin.xavier@broadcom.com> Signed-off-by: Michael Chan <michael.chan@broadcom.com> Link: https://patch.msgid.link/20241217182620.2454075-2-michael.chan@broadcom.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19net: phy: micrel: Dynamically control external clock of KSZ PHYWei Fang
On the i.MX6ULL-14x14-EVK board, enet1_ref and enet2_ref are used as the clock sources for two external KSZ PHYs. However, after closing the two FEC ports, the clk_enable_count of the enet1_ref and enet2_ref clocks is not 0. The root cause is that since the commit 985329462723 ("net: phy: micrel: use devm_clk_get_optional_enabled for the rmii-ref clock"), the external clock of KSZ PHY has been enabled when the PHY driver probes, and it can only be disabled when the PHY driver is removed. This causes the clock to continue working when the system is suspended or the network port is down. Although Heiko explained in the commit message that the patch was because some clock suppliers need to enable the clock to get the valid clock rate , it seems that the simple fix is to disable the clock after getting the clock rate to solve the current problem. This is indeed true, but we need to admit that Heiko's patch has been applied for more than a year, and we cannot guarantee whether there are platforms that only enable rmii-ref in the KSZ PHY driver during this period. If this is the case, disabling rmii-ref will cause RMII on these platforms to not work. Secondly, commit 99ac4cbcc2a5 ("net: phy: micrel: allow usage of generic ethernet-phy clock") just simply enables the generic clock permanently, which seems like the generic clock may only be enabled in the PHY driver. If we simply disable the generic clock, RMII may not work. If we keep it as it is, the platform using the generic clock will have the same problem as the i.MX6ULL platform. To solve this problem, the clock is enabled when phy_driver::resume() is called, and the clock is disabled when phy_driver::suspend() is called. Since phy_driver::resume() and phy_driver::suspend() are not called in pairs, an additional clk_enable flag is added. When phy_driver::suspend() is called, the clock is disabled only if clk_enable is true. Conversely, when phy_driver::resume() is called, the clock is enabled if clk_enable is false. The changes that introduced the problem were only a few lines, while the current fix is about a hundred lines, which seems out of proportion, but it is necessary because kszphy_probe() is used by multiple KSZ PHYs and we need to fix all of them. Fixes: 985329462723 ("net: phy: micrel: use devm_clk_get_optional_enabled for the rmii-ref clock") Fixes: 99ac4cbcc2a5 ("net: phy: micrel: allow usage of generic ethernet-phy clock") Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Reviewed-by: Florian Fainelli <florian.fainelli@broadcom.com> Link: https://patch.msgid.link/20241217063500.1424011-1-wei.fang@nxp.com Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-20Merge tag 'drm-misc-fixes-2024-12-19' of ↵Dave Airlie
https://gitlab.freedesktop.org/drm/misc/kernel into drm-fixes drm-misc-fixes for v6.13-rc4: - udma-buf fixes related to sealing. - dma-buf build warning fix when debugfs is not enabled. - Assorted drm/panel fixes. - Correct error return in drm_dp_tunnel_mgr_create. - Fix even more divide by zero in drm_mode_vrefresh. - Fix FBDEV dependencies in Kconfig. - Documentation fix for drm_sched_fini. - IVPU NULL pointer, memory leak and WARN fix. Signed-off-by: Dave Airlie <airlied@redhat.com> From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Link: https://patchwork.freedesktop.org/patch/msgid/d0763051-87b7-483e-89e0-a9f993383450@linux.intel.com
2024-12-19io_uring: check if iowq is killed before queuingPavel Begunkov
task work can be executed after the task has gone through io_uring termination, whether it's the final task_work run or the fallback path. In this case, task work will find ->io_wq being already killed and null'ed, which is a problem if it then tries to forward the request to io_queue_iowq(). Make io_queue_iowq() fail requests in this case. Note that it also checks PF_KTHREAD, because the user can first close a DEFER_TASKRUN ring and shortly after kill the task, in which case ->iowq check would race. Cc: stable@vger.kernel.org Fixes: 50c52250e2d74 ("block: implement async io_uring discard cmd") Fixes: 773af69121ecc ("io_uring: always reissue from task_work context") Reported-by: Will <willsroot@protonmail.com> Signed-off-by: Pavel Begunkov <asml.silence@gmail.com> Link: https://lore.kernel.org/r/63312b4a2c2bb67ad67b857d17a300e1d3b078e8.1734637909.git.asml.silence@gmail.com Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-12-19Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/netJakub Kicinski
Cross-merge networking fixes after downstream PR (net-6.13-rc4). No conflicts. Adjacent changes: drivers/net/ethernet/renesas/rswitch.h 32fd46f5b69e ("net: renesas: rswitch: remove speed from gwca structure") 922b4b955a03 ("net: renesas: rswitch: rework ts tags management") Signed-off-by: Jakub Kicinski <kuba@kernel.org>
2024-12-19smb: fix bytes written value in /proc/fs/cifs/StatsBharath SM
With recent netfs apis changes, the bytes written value was not getting updated in /proc/fs/cifs/Stats. Fix this by updating tcon->bytes in write operations. Fixes: 3ee1a1fc3981 ("cifs: Cut over to using netfslib") Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-12-19Merge tag 'net-6.13-rc4' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net Pull networking fixes from Paolo Abeni: "Including fixes from can and netfilter. Current release - regressions: - rtnetlink: try the outer netns attribute in rtnl_get_peer_net() - rust: net::phy fix module autoloading Current release - new code bugs: - phy: avoid undefined behavior in *_led_polarity_set() - eth: octeontx2-pf: fix netdev memory leak in rvu_rep_create() Previous releases - regressions: - smc: check sndbuf_space again after NOSPACE flag is set in smc_poll - ipvs: fix clamp() of ip_vs_conn_tab on small memory systems - dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic - eth: - tun: fix tun_napi_alloc_frags() - ionic: no double destroy workqueue - idpf: trigger SW interrupt when exiting wb_on_itr mode - rswitch: rework ts tags management - team: fix feature exposure when no ports are present Previous releases - always broken: - core: fix repeated netlink messages in queue dump - mdiobus: fix an OF node reference leak - smc: check iparea_offset and ipv6_prefixes_cnt when receiving proposal msg - can: fix missed interrupts with m_can_pci - eth: oa_tc6: fix infinite loop error when tx credits becomes 0" * tag 'net-6.13-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (45 commits) net: mctp: handle skb cleanup on sock_queue failures net: mdiobus: fix an OF node reference leak octeontx2-pf: fix error handling of devlink port in rvu_rep_create() octeontx2-pf: fix netdev memory leak in rvu_rep_create() psample: adjust size if rate_as_probability is set netdev-genl: avoid empty messages in queue dump net: dsa: restore dsa_software_vlan_untag() ability to operate on VLAN-untagged traffic selftests: openvswitch: fix tcpdump execution net: usb: qmi_wwan: add Quectel RG255C net: phy: avoid undefined behavior in *_led_polarity_set() netfilter: ipset: Fix for recursive locking warning ipvs: Fix clamp() of ip_vs_conn_tab on small memory systems can: m_can: fix missed interrupts with m_can_pci can: m_can: set init flag earlier in probe rtnetlink: Try the outer netns attribute in rtnl_get_peer_net(). net: netdevsim: fix nsim_pp_hold_write() idpf: trigger SW interrupt when exiting wb_on_itr mode idpf: add support for SW triggered interrupts qed: fix possible uninit pointer read in qed_mcp_nvm_info_populate() net: ethernet: bgmac-platform: fix an OF node reference leak ...
2024-12-19Merge tag 'mmc-v6.13-rc2' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc Pull MMC fixes from Ulf Hansson: - mtk-sd: Cleanup the wakeup configuration in error/remove-path - sdhci-tegra: Correct quirk for ADMA2 length * tag 'mmc-v6.13-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: mmc: mtk-sd: disable wakeup in .remove() and in the error path of .probe() mmc: sdhci-tegra: Remove SDHCI_QUIRK_BROKEN_ADMA_ZEROLEN_DESC quirk
2024-12-19Merge tag 'pwm/for-6.13-rc4-fixes' of ↵Linus Torvalds
git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux Pull pwm fix from Uwe Kleine-König: "Fix regression in pwm-stm32 driver when converting to new waveform support Fabrice Gasnier found and fixed a regression I introduced with v6.13-rc1 when converting the stm32 pwm driver to support the new waveform stuff. On some hardware variants this completely broke the driver" * tag 'pwm/for-6.13-rc4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: pwm: stm32: Fix complementary output in round_waveform_tohw()
2024-12-19Merge tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbdLinus Torvalds
Pull smb server fixes from Steve French: - Two fixes for better handling maximum outstanding requests - Fix simultaneous negotiate protocol race * tag 'v6.13-rc3-ksmbd-server-fixes' of git://git.samba.org/ksmbd: ksmbd: conn lock to serialize smb2 negotiate ksmbd: fix broken transfers when exceeding max simultaneous operations ksmbd: count all requests in req_running counter
2024-12-19PCI/bwctrl: Enable only if more than one speed is supportedLukas Wunner
If a PCIe port only supports a single speed, enabling bandwidth control is pointless: There's no need to monitor autonomous speed changes, nor can the speed be changed. Not enabling it saves a small amount of memory and compute resources, but also fixes a boot hang reported by Niklas: It occurs when enabling bandwidth control on Downstream Ports of Intel JHL7540 "Titan Ridge 2018" Thunderbolt controllers. The ports only support 2.5 GT/s in accordance with USB4 v2 sec 11.2.1, so the present commit works around the issue. PCIe r6.2 sec 8.2.1 prescribes that: "A device must support 2.5 GT/s and is not permitted to skip support for any data rates between 2.5 GT/s and the highest supported rate." Consequently, bandwidth control is currently only disabled if a port doesn't support higher speeds than 2.5 GT/s. However the Implementation Note in PCIe r6.2 sec 7.5.3.18 cautions: "It is strongly encouraged that software primarily utilize the Supported Link Speeds Vector instead of the Max Link Speed field, so that software can determine the exact set of supported speeds on current and future hardware. This can avoid software being confused if a future specification defines Links that do not require support for all slower speeds." In other words, future revisions of the PCIe Base Spec may allow gaps in the Supported Link Speeds Vector. To be future-proof, don't just check whether speeds above 2.5 GT/s are supported, but rather check whether *more than one* speed is supported. Fixes: 665745f27487 ("PCI/bwctrl: Re-add BW notification portdrv as PCIe BW controller") Closes: https://lore.kernel.org/r/db8e457fcd155436449b035e8791a8241b0df400.camel@kernel.org Link: https://lore.kernel.org/r/3564908a9c99fc0d2a292473af7a94ebfc8f5820.1734428762.git.lukas@wunner.de Reported-by: Niklas Schnelle <niks@kernel.org> Tested-by: Niklas Schnelle <niks@kernel.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Jonathan Cameron <Jonthan.Cameron@huawei.com> Reviewed-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-12-19PCI: Honor Max Link Speed when determining supported speedsLukas Wunner
The Supported Link Speeds Vector in the Link Capabilities 2 Register indicates the *supported* link speeds. The Max Link Speed field in the Link Capabilities Register indicates the *maximum* of those speeds. pcie_get_supported_speeds() neglects to honor the Max Link Speed field and will thus incorrectly deem higher speeds as supported. Fix it. One user-visible issue addressed here is an incorrect value in the sysfs attribute "max_link_speed". But the main motivation is a boot hang reported by Niklas: Intel JHL7540 "Titan Ridge 2018" Thunderbolt controllers supports 2.5-8 GT/s speeds, but indicate 2.5 GT/s as maximum. Ilpo recalls seeing this on more devices. It can be explained by the controller's Downstream Ports supporting 8 GT/s if an Endpoint is attached, but limiting to 2.5 GT/s if the port interfaces to a PCIe Adapter, in accordance with USB4 v2 sec 11.2.1: "This section defines the functionality of an Internal PCIe Port that interfaces to a PCIe Adapter. [...] The Logical sub-block shall update the PCIe configuration registers with the following characteristics: [...] Max Link Speed field in the Link Capabilities Register set to 0001b (data rate of 2.5 GT/s only). Note: These settings do not represent actual throughput. Throughput is implementation specific and based on the USB4 Fabric performance." The present commit is not sufficient on its own to fix Niklas' boot hang, but it is a prerequisite: A subsequent commit will fix the boot hang by enabling bandwidth control only if more than one speed is supported. The GENMASK() macro used herein specifies 0 as lowest bit, even though the Supported Link Speeds Vector ends at bit 1. This is done on purpose to avoid a GENMASK(0, 1) macro if Max Link Speed is zero. That macro would be invalid as the lowest bit is greater than the highest bit. Ilpo has witnessed a zero Max Link Speed on Root Complex Integrated Endpoints in particular, so it does occur in practice. (The Link Capabilities Register is optional on RCiEPs per PCIe r6.2 sec 7.5.3.) Fixes: d2bd39c0456b ("PCI: Store all PCIe Supported Link Speeds") Closes: https://lore.kernel.org/r/70829798889c6d779ca0f6cd3260a765780d1369.camel@kernel.org Link: https://lore.kernel.org/r/fe03941e3e1cc42fb9bf4395e302bff53ee2198b.1734428762.git.lukas@wunner.de Reported-by: Niklas Schnelle <niks@kernel.org> Tested-by: Niklas Schnelle <niks@kernel.org> Signed-off-by: Lukas Wunner <lukas@wunner.de> Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org> Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
2024-12-19io_uring/register: limit ring resizing to DEFER_TASKRUNJens Axboe
With DEFER_TASKRUN, we know the ring can't be both waited upon and resized at the same time. This is important for CQ resizing. Allowing SQ ring resizing is more trivial, but isn't the interesting use case. Hence limit ring resizing in general to DEFER_TASKRUN only for now. This isn't a huge problem as CQ ring resizing is generally the most useful on networking type of workloads where it can be hard to size the ring appropriately upfront, and those should be using DEFER_TASKRUN for better performance. Fixes: 79cfe9e59c2a ("io_uring/register: add IORING_REGISTER_RESIZE_RINGS") Signed-off-by: Jens Axboe <axboe@kernel.dk>
2024-12-19workqueue: Do not warn when cancelling WQ_MEM_RECLAIM work from ↵Tvrtko Ursulin
!WQ_MEM_RECLAIM worker After commit 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") amdgpu started seeing the following warning: [ ] workqueue: WQ_MEM_RECLAIM sdma0:drm_sched_run_job_work [gpu_sched] is flushing !WQ_MEM_RECLAIM events:amdgpu_device_delay_enable_gfx_off [amdgpu] ... [ ] Workqueue: sdma0 drm_sched_run_job_work [gpu_sched] ... [ ] Call Trace: [ ] <TASK> ... [ ] ? check_flush_dependency+0xf5/0x110 ... [ ] cancel_delayed_work_sync+0x6e/0x80 [ ] amdgpu_gfx_off_ctrl+0xab/0x140 [amdgpu] [ ] amdgpu_ring_alloc+0x40/0x50 [amdgpu] [ ] amdgpu_ib_schedule+0xf4/0x810 [amdgpu] [ ] ? drm_sched_run_job_work+0x22c/0x430 [gpu_sched] [ ] amdgpu_job_run+0xaa/0x1f0 [amdgpu] [ ] drm_sched_run_job_work+0x257/0x430 [gpu_sched] [ ] process_one_work+0x217/0x720 ... [ ] </TASK> The intent of the verifcation done in check_flush_depedency is to ensure forward progress during memory reclaim, by flagging cases when either a memory reclaim process, or a memory reclaim work item is flushed from a context not marked as memory reclaim safe. This is correct when flushing, but when called from the cancel(_delayed)_work_sync() paths it is a false positive because work is either already running, or will not be running at all. Therefore cancelling it is safe and we can relax the warning criteria by letting the helper know of the calling context. Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com> Fixes: fca839c00a12 ("workqueue: warn if memory reclaim tries to flush !WQ_MEM_RECLAIM workqueue") References: 746ae46c1113 ("drm/sched: Mark scheduler work queues with WQ_MEM_RECLAIM") Cc: Tejun Heo <tj@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Lai Jiangshan <jiangshanlai@gmail.com> Cc: Alex Deucher <alexander.deucher@amd.com> Cc: Christian König <christian.koenig@amd.com Cc: Matthew Brost <matthew.brost@intel.com> Cc: <stable@vger.kernel.org> # v4.5+ Signed-off-by: Tejun Heo <tj@kernel.org>
2024-12-19smb: client: fix TCP timers deadlock after rmmodEnzo Matsumiya
Commit ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.") fixed a netns UAF by manually enabled socket refcounting (sk->sk_net_refcnt=1 and sock_inuse_add(net, 1)). The reason the patch worked for that bug was because we now hold references to the netns (get_net_track() gets a ref internally) and they're properly released (internally, on __sk_destruct()), but only because sk->sk_net_refcnt was set. Problem: (this happens regardless of CONFIG_NET_NS_REFCNT_TRACKER and regardless if init_net or other) Setting sk->sk_net_refcnt=1 *manually* and *after* socket creation is not only out of cifs scope, but also technically wrong -- it's set conditionally based on user (=1) vs kernel (=0) sockets. And net/ implementations seem to base their user vs kernel space operations on it. e.g. upon TCP socket close, the TCP timers are not cleared because sk->sk_net_refcnt=1: (cf. commit 151c9c724d05 ("tcp: properly terminate timers for kernel sockets")) net/ipv4/tcp.c: void tcp_close(struct sock *sk, long timeout) { lock_sock(sk); __tcp_close(sk, timeout); release_sock(sk); if (!sk->sk_net_refcnt) inet_csk_clear_xmit_timers_sync(sk); sock_put(sk); } Which will throw a lockdep warning and then, as expected, deadlock on tcp_write_timer(). A way to reproduce this is by running the reproducer from ef7134c7fc48 and then 'rmmod cifs'. A few seconds later, the deadlock/lockdep warning shows up. Fix: We shouldn't mess with socket internals ourselves, so do not set sk_net_refcnt manually. Also change __sock_create() to sock_create_kern() for explicitness. As for non-init_net network namespaces, we deal with it the best way we can -- hold an extra netns reference for server->ssocket and drop it when it's released. This ensures that the netns still exists whenever we need to create/destroy server->ssocket, but is not directly tied to it. Fixes: ef7134c7fc48 ("smb: client: Fix use-after-free of network namespace.") Cc: stable@vger.kernel.org Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-12-19smb: client: Deduplicate "select NETFS_SUPPORT" in KconfigDragan Simic
Repeating automatically selected options in Kconfig files is redundant, so let's delete repeated "select NETFS_SUPPORT" that was added accidentally. Fixes: 69c3c023af25 ("cifs: Implement netfslib hooks") Signed-off-by: Dragan Simic <dsimic@manjaro.org> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-12-19smb: use macros instead of constants for leasekey size and default cifsattrs ↵Bharath SM
value Replace default hardcoded value for cifsAttrs with ATTR_ARCHIVE macro Use SMB2_LEASE_KEY_SIZE macro for leasekey size in smb2_lease_break Signed-off-by: Bharath SM <bharathsm@microsoft.com> Signed-off-by: Steve French <stfrench@microsoft.com>
2024-12-19drm/sched: Fix drm_sched_fini() docu generationBagas Sanjaya
Commit baf4afc5831438 ("drm/sched: Improve teardown documentation") added a list of drm_sched_fini()'s problems. The list triggers htmldocs warning (but renders correctly in htmldocs output): Documentation/gpu/drm-mm:571: ./drivers/gpu/drm/scheduler/sched_main.c:1359: ERROR: Unexpected indentation. Separate the list from the preceding paragraph by a blank line to fix the warning. While at it, also end the aforementioned paragraph by a colon. Fixes: baf4afc58314 ("drm/sched: Improve teardown documentation") Reported-by: Stephen Rothwell <sfr@canb.auug.org.au> Closes: https://lore.kernel.org/r/20241108175655.6d3fcfb7@canb.auug.org.au/ Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com> [phasta: Adjust commit message] Signed-off-by: Philipp Stanner <phasta@kernel.org> Link: https://patchwork.freedesktop.org/patch/msgid/20241217034915.62594-1-bagasdotme@gmail.com
2024-12-19Merge branch 'net-fib_rules-add-flow-label-selector-support'Paolo Abeni
Ido Schimmel says: ==================== net: fib_rules: Add flow label selector support In some deployments users would like to encode path information into certain bits of the IPv6 flow label, the UDP source port and the DSCP and use this information to route packets accordingly. Redirecting traffic to a routing table based on the flow label is not currently possible with Linux as FIB rules cannot match on it despite the flow label being available in the IPv6 flow key. This patchset extends FIB rules to match on the flow label with a mask. Future patches will add mask attributes to L4 ports and DSCP matches. Patches #1-#5 gradually extend FIB rules to match on the flow label. Patches #6-#7 allow user space to specify a flow label in route get requests. This is useful for both debugging and testing. Patch #8 adjusts the fib6_table_lookup tracepoint to print the flow label to the trace buffer for better observability. Patch #9 extends the FIB rule selftest with flow label test cases while utilizing the route get functionality from patch #6. ==================== Link: https://patch.msgid.link/20241216171201.274644-1-idosch@nvidia.com Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19selftests: fib_rule_tests: Add flow label selector match testsIdo Schimmel
Add tests for the new FIB rule flow label selector. Test both good and bad flows and with both input and output routes. # ./fib_rule_tests.sh IPv6 FIB rule tests [...] TEST: rule6 check: flowlabel redirect to table [ OK ] TEST: rule6 check: flowlabel no redirect to table [ OK ] TEST: rule6 del by pref: flowlabel redirect to table [ OK ] TEST: rule6 check: iif flowlabel redirect to table [ OK ] TEST: rule6 check: iif flowlabel no redirect to table [ OK ] TEST: rule6 del by pref: iif flowlabel redirect to table [ OK ] TEST: rule6 check: flowlabel masked redirect to table [ OK ] TEST: rule6 check: flowlabel masked no redirect to table [ OK ] TEST: rule6 del by pref: flowlabel masked redirect to table [ OK ] TEST: rule6 check: iif flowlabel masked redirect to table [ OK ] TEST: rule6 check: iif flowlabel masked no redirect to table [ OK ] TEST: rule6 del by pref: iif flowlabel masked redirect to table [ OK ] [...] Tests passed: 268 Tests failed: 0 Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19tracing: ipv6: Add flow label to fib6_table_lookup tracepointIdo Schimmel
The different parameters affecting the IPv6 route lookup are printed to the trace buffer by the fib6_table_lookup tracepoint. Add the IPv6 flow label for better observability as it can affect the route lookup both in terms of multipath hash calculation and policy based routing (FIB rules). Example: # echo 1 > /sys/kernel/tracing/events/fib6/fib6_table_lookup/enable # ip -6 route get ::1 flowlabel 0x12345 ipproto udp sport 12345 dport 54321 &> /dev/null # cat /sys/kernel/tracing/trace_pipe ip-358 [010] ..... 44.897484: fib6_table_lookup: table 255 oif 0 iif 1 proto 17 ::/12345 -> ::1/54321 flowlabel 0x12345 tos 0 scope 0 flags 0 ==> dev lo gw :: err 0 Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
2024-12-19netlink: specs: Add route flow label attributeIdo Schimmel
Add the new flow label attribute to the spec. Example: # ip link add name dummy1 up type dummy # ip -6 route add default table 254 dev dummy1 # ip -6 route add default table 10 dev dummy1 # ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_rule.yaml \ --do newrule \ --json '{"family": 10, "priority": 1, "flowlabel": 10, "flowlabel-mask": 255, "action": 1, "table": 10}' None $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_route.yaml \ --do getroute \ --json '{"rtm-family": 10, "rta-flowlabel": 1}' --output-json \ | jq '.["rta-table"]' 254 $ ./tools/net/ynl/cli.py --spec Documentation/netlink/specs/rt_route.yaml \ --do getroute \ --json '{"rtm-family": 10, "rta-flowlabel": 10}' --output-json \ | jq '.["rta-table"]' 10 Reviewed-by: Petr Machata <petrm@nvidia.com> Signed-off-by: Ido Schimmel <idosch@nvidia.com> Reviewed-by: Guillaume Nault <gnault@redhat.com> Signed-off-by: Paolo Abeni <pabeni@redhat.com>
generated by cgit (git 2.34.1) at 2025-09-14 15:42:17 +0000