| Age | Commit message (Collapse) | Author |
|---|
|
dce110_fill_display_configs
Also needed by DCE 6.
This way the code that gathers this info can be shared between
different DCE versions and doesn't have to be repeated.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8107432dff37db26fcb641b6cebeae8981cd73a0)
Cc: stable@vger.kernel.org
|
|
dce110_fill_display_configs
dce110_fill_display_configs is shared between DCE 6-11, and
finding the first CRTC and its line time is relevant to DCE 6 too.
Move the code to find it from DCE 11 specific code.
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 4ab09785f8d5d03df052827af073d5c508ff5f63)
Cc: stable@vger.kernel.org
|
|
Adjust the nominal (and performance) clocks for DCE 8-10,
and set them to 625 MHz, which is the value used by the legacy
display code in amdgpu_atombios_get_clock_info.
This was tested with Hawaii, Tonga and Fiji.
These GPUs can output 4K 60Hz (10-bit depth) at 625 MHz.
The extra 15% clock was added as a workaround for a Polaris issue
which uses DCE 11, and should not have been used on DCE 8-10 which
are already hardcoded to the highest possible display clock.
Unfortunately, the extra 15% was mistakenly copied and kept
even on code paths which don't affect Polaris.
This commit fixes that and also adds a check to make sure
not to exceed the maximum DCE 8-10 display clock.
Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris")
Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1ae45b5d4f371af8ae51a3827d0ec9fe27eeb867)
|
|
The extra 15% clock was added as a workaround for a Polaris issue
which uses DCE 11, and should not have been used on DCE 6 which
is already hardcoded to the highest possible display clock.
Unfortunately, the extra 15% was mistakenly copied and kept
even on code paths which don't affect Polaris.
This commit fixes that and also adds a check to make sure
not to exceed the maximum DCE 6 display clock.
Fixes: 8cd61c313d8b ("drm/amd/display: Raise dispclk value for Polaris")
Fixes: dc88b4a684d2 ("drm/amd/display: make clk mgr soc specific")
Fixes: 3ecb3b794e2c ("drm/amd/display: dc/clk_mgr: add support for SI parts (v2)")
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Rodrigo Siqueira <siqueira@igalia.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 427980c1cbd22bb256b9385f5ce73c0937562408)
Cc: stable@vger.kernel.org
|
|
The function mod_hdcp_hdcp1_create_session() calls the function
get_first_active_display(), but does not check its return value.
The return value is a null pointer if the display list is empty.
This will lead to a null pointer dereference.
Add a null pointer check for get_first_active_display() and return
MOD_HDCP_STATUS_DISPLAY_NOT_FOUND if the function return null.
This is similar to the commit c3e9826a2202
("drm/amd/display: Add null pointer check for get_first_active_display()").
Fixes: 2deade5ede56 ("drm/amd/display: Remove hdcp display state with mst fix")
Signed-off-by: Chenyuan Yang <chenyuan0y@gmail.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5e43eb3cd731649c4f8b9134f857be62a416c893)
|
|
[WHY & HOW]
IPS & self-fresh feature can cause vblank counter resets between
vblank disable and enable.
It may cause system stuck due to wait the vblank counter.
Call the drm_crtc_vblank_restore() during vblank enable to estimate
missed vblanks by using timestamps and update the vblank counter in
DRM.
It can make the vblank counter increase smoothly and resolve this issue.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 34d66bc7ff10e146a4cec76cf286979740a10954)
Cc: stable@vger.kernel.org
|
|
[WHY]
Although unlikely drm_atomic_get_new_connector_state() or
drm_atomic_get_old_connector_state() can return NULL.
[HOW]
Check returns before dereference.
Cc: Mario Limonciello <mario.limonciello@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Dan Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 1e5e8d672fec9f2ab352be121be971877bff2af9)
Cc: stable@vger.kernel.org
|
|
Take into account the limits from the vbios. Ported
from the SMU13 code.
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4352
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Reviewed-by: Kenneth Feng <kenneth.feng@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 203cc7f1dd86f2c8de5c3c6182f19adac7c9c206)
Cc: stable@vger.kernel.org
|
|
This reverts commits:
commit 1f26214d268b ("drm/amd/display: Add HPO encoder support to Replay")
commit 3bfce48b109f ("drm/amd/display: Add support for Panel Replay on DP1 eDP (panel_inst=1)")
due to visual confirm issue.
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Gabe Teeger <gabe.teeger@amd.com>
Signed-off-by: Wayne Lin <wayne.lin@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 92f68f6a1b297633159a3f3759e4dfc7e5b58abb)
|
|
To pick up the changes in this cset:
7d9896e9f6d02d8a vhost: Reintroduce kthread API and add mode selection
333c515d189657c9 vhost-net: allow configuring extended features
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/vhost.h include/uapi/linux/vhost.h
Please see tools/include/uapi/README for further details.
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Jason Wang <jasowang@redhat.com>
Cc: kvm@vger.kernel.org
Cc: virtualization@lists.linux.dev
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
b1fabef37bd504f3 prctl: Introduce PR_MTE_STORE_ONLY
a2fc422ed75748ee syscall_user_dispatch: Add PR_SYS_DISPATCH_INCLUSIVE_ON
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/prctl.h include/uapi/linux/prctl.h
Please see tools/include/uapi/README for further details.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
76fdb7eb4e1c9108 uapi: export PROCFS_ROOT_INO
ca115d7e754691c0 tree-wide: s/struct fileattr/struct file_kattr/g
be7efb2d20d67f33 fs: introduce file_getattr and file_setattr syscalls
9eb22f7fedfc9eb1 fs: add ioctl to query metadata and protection info capabilities
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fs.h include/uapi/linux/fs.h
Please see tools/include/uapi/README for further details.
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
3941e37f62fe2c3c uapi/fcntl: add FD_PIDFS_ROOT
cd5d2006327b6d84 uapi/fcntl: add FD_INVALID
67fcec2919e4ed31 fcntl/pidfd: redefine PIDFD_SELF_THREAD_GROUP
a4c746f06853f91d uapi/fcntl: mark range as reserved
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/perf/trace/beauty/include/uapi/linux/fcntl.h include/uapi/linux/fcntl.h
Please see tools/include/uapi/README for further details.
Cc: Christian Brauner <brauner@kernel.org>
Cc: linux-fsdevel@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
be7efb2d20d67f33 fs: introduce file_getattr and file_setattr syscalls
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/asm-generic/unistd.h include/uapi/asm-generic/unistd.h
diff -u tools/scripts/syscall.tbl scripts/syscall.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_32.tbl arch/x86/entry/syscalls/syscall_32.tbl
diff -u tools/perf/arch/x86/entry/syscalls/syscall_64.tbl arch/x86/entry/syscalls/syscall_64.tbl
diff -u tools/perf/arch/powerpc/entry/syscalls/syscall.tbl arch/powerpc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/s390/entry/syscalls/syscall.tbl arch/s390/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/mips/entry/syscalls/syscall_n64.tbl arch/mips/kernel/syscalls/syscall_n64.tbl
diff -u tools/perf/arch/arm/entry/syscalls/syscall.tbl arch/arm/tools/syscall.tbl
diff -u tools/perf/arch/sh/entry/syscalls/syscall.tbl arch/sh/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/sparc/entry/syscalls/syscall.tbl arch/sparc/kernel/syscalls/syscall.tbl
diff -u tools/perf/arch/xtensa/entry/syscalls/syscall.tbl arch/xtensa/kernel/syscalls/syscall.tbl
Please see tools/include/uapi/README for further details.
Cc: Arnd Bergmann <arnd@arndb.de>
CC: linux-api@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
69bf2053608423cb powerpc: Drop GPL boilerplate text with obsolete FSF address
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/powerpc/include/uapi/asm/kvm.h arch/powerpc/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
efe676a1a7554219 arm64: proton-pack: Add new CPUs 'k' values for branch mitigation
e18c09b204e81702 arm64: Add support for HIP09 Spectre-BHB mitigation
a9b5bd81b294d30a arm64: cputype: Add MIDR_CORTEX_A76AE
53a52a0ec7680287 arm64: cputype: Add comments about Qualcomm Kryo 5XX and 6XX cores
401c3333bb2396aa arm64: cputype: Add QCOM_CPU_PART_KRYO_3XX_GOLD
86edf6bdcf0571c0 smccc/kvm_guest: Enable errata based on implementation CPUs
0bc9a9e85fcf4ffb KVM: arm64: Work around x1e's CNTVOFF_EL2 bogosity
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/arm64/include/asm/cputype.h arch/arm64/include/asm/cputype.h
But the following two changes cannot be applied since they introduced
new build errors in util/arm-spe.c. So it still has the warning after
this change.
c8c2647e69bedf80 arm64: Make _midr_in_range_list() an exported function
e3121298c7fcaf48 arm64: Modify _midr_range() functions to read MIDR/REVIDR internally
Please see tools/include/uapi/README for further details.
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
perf build: [WIP] Fix arm-spe build errors
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
7b306dfa326f7011 x86/sev: Evict cache lines during SNP memory validation
65f55a30176662ee x86/CPU/AMD: Add CPUID faulting support
d8010d4ba43e9f79 x86/bugs: Add a Transient Scheduler Attacks mitigation
a3c4f3396b82849a x86/msr-index: Add AMD workload classification MSRs
17ec2f965344ee3f KVM: VMX: Allow guest to set DEBUGCTL.RTM_DEBUG if RTM is supported
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
diff -u tools/arch/x86/include/asm/msr-index.h arch/x86/include/asm/msr-index.h
Please see tools/include/uapi/README for further details.
Cc: x86@kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
5ccaeedb489b41ce cfi: add C CFI type macro
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/cfi_types.h include/linux/cfi_types.h
Please see tools/include/uapi/README for further details.
Cc: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
To pick up the changes in this cset:
104ea1c84b91c9f4 bits: unify the non-asm GENMASK*()
6d4471252ccc1722 bits: split the definition of the asm and non-asm GENMASK*()
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/linux/bits.h include/linux/bits.h
Please see tools/include/uapi/README for further details.
Cc: Yury Norov <yury.norov@gmail.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
bdev_nr_sectors() == 0 is a pattern used for block devices that have
been hot removed, don't spam the log about them.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20250818101102.1604551-1-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Use vfs_getattr_nosec() in lo_calculate_size() for getting the file
size, rather than just read the cached inode size via i_size_read().
This provides better results than cached inode data, particularly for
network filesystems where metadata may be stale.
Signed-off-by: Rajeev Mishra <rajeevm@hpe.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250818184821.115033-3-rajeevm@hpe.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
Renamed get_size to lo_calculate_size and merged the logic from get_size
and get_loop_size into a single function. Update all callers to use
lo_calculate_size. This is done in preparation for improving the size
detection logic.
Signed-off-by: Rajeev Mishra <rajeevm@hpe.com>
Reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20250818184821.115033-2-rajeevm@hpe.com
[axboe: massage commit message]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
To pick up the changes in this cset:
f55ce5a6cd33211c KVM: arm64: Expose new KVM cap for cacheable PFNMAP
28224ef02b56fcee KVM: TDX: Report supported optional TDVMCALLs in TDX capabilities
4580dbef5ce0f95a KVM: TDX: Exit to userspace for SetupEventNotifyInterrupt
25e8b1dd4883e6c2 KVM: TDX: Exit to userspace for GetTdVmCallInfo
cf207eac06f661fb KVM: TDX: Handle TDG.VP.VMCALL<GetQuote>
This addresses these perf build warnings:
Warning: Kernel ABI header differences:
diff -u tools/include/uapi/linux/kvm.h include/uapi/linux/kvm.h
diff -u tools/arch/x86/include/uapi/asm/kvm.h arch/x86/include/uapi/asm/kvm.h
Please see tools/include/uapi/README for further details.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: kvm@vger.kernel.org
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
There's an environment that caused the following build error. Include
"debug.h" (under util directory) to fix it.
arch/x86/tests/topdown.c: In function 'event_cb':
arch/x86/tests/topdown.c:53:25: error: implicit declaration of function 'pr_debug'
[-Werror=implicit-function-declaration]
53 | pr_debug("Broken topdown information for '%s'\n", evsel__name(evsel));
| ^~~~~~~~
cc1: all warnings being treated as errors
Link: https://lore.kernel.org/r/20250815164122.289651-1-namhyung@kernel.org
Fixes: 5b546de9cc177936 ("perf topdown: Use attribute to see an event is a topdown metic or slots")
Reported-by: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
|
|
`devm_gpiod_get_optional()` may return non-NULL error pointer on failure.
Check its return value using `IS_ERR()` and propagate the error if
necessary.
Fixes: df6e71256c84 ("iio: pressure: bmp280: Explicitly mark GPIO optional")
Signed-off-by: Salah Triki <salah.triki@gmail.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20250818092740.545379-2-salah.triki@gmail.com
Cc: <Stable@vger.kernel.org>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
|
|
gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux into block-6.17
Pull MD fixes from Yu:
"- Add a legacy_async_del_gendisk mode, to prevent a user tools
regression. New user tools releases will not use such a mode, the old
release with a new kernel now will have warning about deprecated
behavior, and we prepare to remove this legacy mode after about a
year later.
- The rename in kernel causing user tools build failure, revert the
rename in mdp_superblock_s.
- Fix a regression that interrupted resync can be shown as recover from
mdstat or sysfs."
* tag 'md-6.17-20250819' of gitolite.kernel.org:pub/scm/linux/kernel/git/mdraid/linux:
md: fix sync_action incorrect display during resync
md: add helper rdev_needs_recovery()
md: keep recovery_cp in mdp_superblock_s
md: add legacy_async_del_gendisk mode
|
|
Modify the standby configuration
Signed-off-by: Zhang Yi <zhangyi@everest-semi.com>
Link: https://patch.msgid.link/20250815024729.3051-1-zhangyi@everest-semi.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Occasionally, the exit latency of the idle state selected by the menu
governor may exceed the PM QoS CPU wakeup latency limit. Namely, if the
scheduler tick has been stopped already and predicted_ns is greater than
the tick period length, the governor may return an idle state whose exit
latency exceeds latency_req because that decision is made before
checking the current idle state's exit latency.
For instance, say that there are 3 idle states, 0, 1, and 2. For idle
states 0 and 1, the exit latency is equal to the target residency and
the values are 0 and 5 us, respectively. State 2 is deeper and has the
exit latency and target residency of 200 us and 2 ms (which is greater
than the tick period length), respectively.
Say that predicted_ns is equal to TICK_NSEC and the PM QoS latency
limit is 20 us. After the first two iterations of the main loop in
menu_select(), idx becomes 1 and in the third iteration of it the target
residency of the current state (state 2) is greater than predicted_ns.
State 2 is not a polling one and predicted_ns is not less than TICK_NSEC,
so the check on whether or not the tick has been stopped is done. Say
that the tick has been stopped already and there are no imminent timers
(that is, delta_tick is greater than the target residency of state 2).
In that case, idx becomes 2 and it is returned immediately, but the exit
latency of state 2 exceeds the latency limit.
Address this issue by modifying the code to compare the exit latency of
the current idle state (idle state i) with the latency limit before
comparing its target residency with predicted_ns, which allows one
more exit_latency_ns check that becomes redundant to be dropped.
However, after the above change, latency_req cannot take the predicted_ns
value any more, which takes place after commit 38f83090f515 ("cpuidle:
menu: Remove iowait influence"), because it may cause a polling state
to be returned prematurely.
In the context of the previous example say that predicted_ns is 3000 and
the PM QoS latency limit is still 20 us. Additionally, say that idle
state 0 is a polling one. Moving the exit_latency_ns check before the
target_residency_ns one causes the loop to terminate in the second
iteration, before the target_residency_ns check, so idle state 0 will be
returned even though previously state 1 would be returned if there were
no imminent timers.
For this reason, remove the assignment of the predicted_ns value to
latency_req from the code.
Fixes: 5ef499cd571c ("cpuidle: menu: Handle stopped tick more aggressively")
Cc: 4.17+ <stable@vger.kernel.org> # 4.17+
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Christian Loehle <christian.loehle@arm.com>
Link: https://patch.msgid.link/5043159.31r3eYUQgx@rafael.j.wysocki
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux
Merge a cpupower utility fix for 6.17-rc3 from Shuah Khan:
"Fixes set subcommand -t option and enables boost control feature on
non-x86 platforms that support boost control."
* tag 'linux-cpupower-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/shuah/linux:
cpupower: Allow control of boost feature on non-x86 based systems with boost support.
cpupower: Fix a bug where the -t option of the set subcommand was not working.
|
|
The .remove() callback is also used during error handling in
faux_probe(). As einj_remove() was marked with __exit it's not linked
into the kernel if the driver is built-in, potentially resulting in
resource leaks.
Also remove the comment justifying the __exit annotation which doesn't
apply any more since the driver was converted to the faux device
interface.
Fixes: 6cb9441bfe8d ("ACPI: APEI: EINJ: Transition to the faux device interface")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Cc: 6.16+ <stable@vger.kernel.org> # 6.16+
Link: https://patch.msgid.link/20250814051157.35867-2-u.kleine-koenig@baylibre.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
Otherwise they are very hard to read in the kernel log.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250818045456.1482889-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
queue_limits_stack_integrity needs to handle the new pi_tuple_size field,
otherwise stacking PI-capable devices will always fail.
Fixes: 76e45252a4ce ("block: introduce pi_tuple_size field in blk_integrity")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Anuj Gupta <anuj20.g@samsung.com>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Link: https://lore.kernel.org/r/20250818045456.1482889-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"Several zoned mode fixes, mount option printing fixups, folio state
handling fixes and one log replay fix.
- zoned mode:
- zone activation and finish fixes
- block group reservation fixes
- mount option fixes:
- bring back printing of mount options with key=value that got
accidentally dropped during mount option parsing in 6.8
- fix inverse logic or typos when printing nodatasum/nodatacow
- folio status fixes:
- writeback fixes in zoned mode
- properly reset dirty/writeback if submission fails
- properly handle TOWRITE xarray mark/tag
- do not set mtime/ctime to current time when unlinking for log
replay"
* tag 'for-6.17-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix printing of mount info messages for NODATACOW/NODATASUM
btrfs: restore mount option info messages during mount
btrfs: fix incorrect log message for nobarrier mount option
btrfs: fix buffer index in wait_eb_writebacks()
btrfs: subpage: keep TOWRITE tag until folio is cleaned
btrfs: clear TAG_TOWRITE from buffer tree when submitting a tree block
btrfs: do not set mtime/ctime to current time when unlinking for log replay
btrfs: clear block dirty if btrfs_writepage_cow_fixup() failed
btrfs: clear block dirty if submit_one_sector() failed
btrfs: zoned: limit active zones to max_open_zones
btrfs: zoned: fix write time activation failure for metadata block group
btrfs: zoned: fix data relocation block group reservation
btrfs: zoned: skip ZONE FINISH of conventional zones
|
|
The __einj_error_inject() function allocates memory via kmalloc()
without checking for allocation failure, which could lead to a
NULL pointer dereference.
Return -ENOMEM in case allocation fails.
Fixes: b47610296d17 ("ACPI: APEI: EINJ: Enable EINJv2 error injections")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Hanjun Guo <guohanjun@huawei.com>
Link: https://patch.msgid.link/20250815024207.3038-1-hanchunchao@inspur.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
On an EINJV2 capable system, users may still use the old injection
interface but einj_get_parameter_address() takes the EINJV2 path to map
the parameter structure. This results in the address the user supplied
being stored to the wrong location and the BIOS injecting based on an
uninitialized field (0x0 in the reported case).
Check the version of the request when mapping the EINJ parameter
structure in BIOS reserved memory.
Fixes: 691a0f0a557b ("ACPI: APEI: EINJ: Discover EINJv2 parameters")
Reported-by: Lai, Yi1 <yi1.lai@intel.com>
Signed-off-by: Tony Luck <tony.luck@intel.com>
Reviewed-by: Zaid Alali <zaidal@os.amperecomputing.com>
Reviewed-by: Hanjun Guo <gouhanjun@huawei.com>
Link: https://patch.msgid.link/20250814161706.4489-1-tony.luck@intel.com
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
- Fix fast commit checks for file systems with ea_inode enabled
- Don't drop the i_version mount option on a remount
- Fix FIEMAP reporting when there are holes in a bigalloc file system
- Don't fail when mounting read-only when there are inodes in the
orphan file
- Fix hole length overflow for indirect mapped files on file systems
with an 8k or 16k block file system
* tag 'ext4_for_linus-6.17-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
jbd2: prevent softlockup in jbd2_log_do_checkpoint()
ext4: fix incorrect function name in comment
ext4: use kmalloc_array() for array space allocation
ext4: fix hole length calculation overflow in non-extent inodes
ext4: don't try to clear the orphan_present feature block device is r/o
ext4: fix reserved gdt blocks handling in fsmap
ext4: fix fsmap end of range reporting with bigalloc
ext4: remove redundant __GFP_NOWARN
ext4: fix unused variable warning in ext4_init_new_dir
ext4: remove useless if check
ext4: check fast symlink for ea_inode correctly
ext4: preserve SB_I_VERSION on remount
ext4: show the default enabled i_version option
|
|
When a VM is marked as an usuable we disallow new submissions from it,
however submissions that where already scheduled on the ring would still
be re-sent.
Since this can lead to further hangs, avoid emitting the actual IBs.
Fixes: 6a4d287a1ae6 ("drm/msm: Mark VM as unusable on GPU hangs")
Signed-off-by: Antonino Maniscalco <antomani103@gmail.com>
Reviewed-by: Akhil P Oommen <akhilpo@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/668314/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
In the past %pK was preferable to %p as it would not leak raw pointer
values into the kernel log.
Since commit ad67b74d2469 ("printk: hash addresses printed with %p")
the regular %p has been improved to avoid this issue.
Furthermore, restricted pointers ("%pK") were never meant to be used
through printk(). They can still unintentionally leak raw pointers or
acquire sleeping locks in atomic contexts.
Switch to the regular pointer formatting which is safer and
easier to reason about.
Signed-off-by: Thomas Weißschuh <thomas.weissschuh@linutronix.de>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Patchwork: https://patchwork.freedesktop.org/patch/667895/
Signed-off-by: Rob Clark <robin.clark@oss.qualcomm.com>
|
|
The reset reason value may be "all bits set", e.g. 0xFFFFFFFF. This is a
commonly used error response from hardware. This may occur due to a real
hardware issue or when running in a VM.
The user will see all reset reasons reported in this case.
Check for an error response value and return early to avoid decoding
invalid data.
Also, adjust the data variable type to match the hardware register size.
Fixes: ab8131028710 ("x86/CPU/AMD: Print the reason for the last reset")
Reported-by: Libing He <libhe@redhat.com>
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250721181155.3536023-1-yazen.ghannam@amd.com
|
|
This patch corrects two minor spelling issues found in
Documentation/userspace-api/iommufd.rst:
- "primarly" -> "primarily"
- "sharable" -> "shareable"
Found using codespell(1).
Link: https://patch.msgid.link/r/20250815153840.188213-2-alessandro@0x65c.net
Signed-off-by: Alessandro Ratti <alessandro@0x65c.net>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
Use kvfree() instead of kfree() to free pages allocated by kvcalloc()
in iommufs_hw_queue_alloc_phys() to fix potential memory corruption.
Ensure the memory is properly freed, as kvcalloc may internally use
vmalloc or kmalloc depending on available memory in the system.
Fixes: 2238ddc2b056 ("iommufd/viommu: Add IOMMUFD_CMD_HW_QUEUE_ALLOC ioctl")
Link: https://patch.msgid.link/r/aJifyVV2PL6WGEs6@bhairav-test.ee.iitb.ac.in
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Kevin Tian <kevin.tian@intel.com>
Reviewed-by: Nicolin Chen <nicolinc@nvidia.com>
Reviewed-by: Pranjal Shrivastava <praan@google.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
|
|
__ADDRESSABLE_ASM_STR() is where the necessary stringification happens.
As long as "sym" doesn't contain any odd characters, no quoting is
required for its use with .quad / .long. In fact the quotation gets in
the way with gas 2.25; it's only from 2.26 onwards that quoted symbols
are half-way properly supported.
However, assembly being different from C anyway, drop
__ADDRESSABLE_ASM_STR() and its helper macro altogether. A simple
.global directive will suffice to get the symbol "declared", i.e. into
the symbol table. While there also stop open-coding STATIC_CALL_TRAMP()
and STATIC_CALL_KEY().
Fixes: 0ef8047b737d ("x86/static-call: provide a way to do very early static-call updates")
Signed-off-by: Jan Beulich <jbeulich@suse.com>
Acked-by: Josh Poimboeuf <jpoimboe@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Juergen Gross <jgross@suse.com>
Message-ID: <609d2c74-de13-4fae-ab1a-1ec44afb948d@suse.com>
|
|
With module test, there is error dump:
------------[ cut here ]------------
notifier callback pca9450_i2c_restart_handler already registered
WARNING: kernel/notifier.c:23 at notifier_chain_register+0x5c/0x88,
CPU#0: kworker/u16:3/50
Call trace:
notifier_chain_register+0x5c/0x88 (P)
atomic_notifier_chain_register+0x30/0x58
register_restart_handler+0x1c/0x28
pca9450_i2c_probe+0x418/0x538
i2c_device_probe+0x220/0x3d0
really_probe+0x114/0x410
__driver_probe_device+0xa0/0x150
driver_probe_device+0x40/0x114
__device_attach_driver+0xd4/0x12c
So use devm_register_sys_off_handler to let kernel handle the resource
free to avoid kernel dump.
Fixes: 6157e62b07d9 ("regulator: pca9450: Add restart handler")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Link: https://patch.msgid.link/20250815-pca9450-v1-1-7748e362dc97@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
|
|
Use ARRAY_SIZE() macro while calculating size of an array to improve
code readability and reduce potential sizing errors.
Implement this suggestion given by spatch tool by running
coccinelle script - scripts/coccinelle/misc/array_size.cocci
Follow ARRAY_SIZE() macro usage pattern in ublk.c introduced by,
commit ec120093180b9 ("selftests: ublk: fix ublk_find_tgt()")
wherever appropriate to maintain consistency.
Signed-off-by: Akhilesh Patil <akhilesh@ee.iitb.ac.in>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/aKGihYui6/Pcijbk@bhairav-test.ee.iitb.ac.in
Signed-off-by: Jens Axboe <axboe@kernel.dk>
|
|
commit 9d23967b18c6 ("ovl: simplify an error path in
ovl_copy_up_workdir()") introduced the helper ovl_cleanup_unlocked(),
which is later used in several following patches to re-acquire the parent
inode lock and unlink a dentry that was earlier found using lookup.
This helper was eventually renamed to ovl_cleanup().
The helper ovl_parent_lock() is used to re-acquire the parent inode lock.
After acquiring the parent inode lock, the helper verifies that the
dentry has not since been moved to another parent, but it failed to
verify that the dentry wasn't unlinked from the parent.
This means that now every call to ovl_cleanup() could potentially
race with another thread, unlinking the dentry to be cleaned up
underneath overlayfs and trigger a vfs assertion.
Reported-by: syzbot+ec9fab8b7f0386b98a17@syzkaller.appspotmail.com
Tested-by: syzbot+ec9fab8b7f0386b98a17@syzkaller.appspotmail.com
Fixes: 9d23967b18c6 ("ovl: simplify an error path in ovl_copy_up_workdir()")
Suggested-by: NeilBrown <neil@brown.name>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
ovl_create_temp() treats "workdir" as a parent in which it creates an
object so it should use I_MUTEX_PARENT.
Prior to the commit identified below the lock was taken by the caller
which sometimes used I_MUTEX_PARENT and sometimes used I_MUTEX_NORMAL.
The use of I_MUTEX_NORMAL was incorrect but unfortunately copied into
ovl_create_temp().
Note to backporters: This patch only applies after the last Fixes given
below (post v6.16). To fix the bug in v6.7 and later the
inode_lock() call in ovl_copy_up_workdir() needs to nest using
I_MUTEX_PARENT.
Link: https://lore.kernel.org/all/67a72070.050a0220.3d72c.0022.GAE@google.com/
Cc: stable@vger.kernel.org
Reported-by: syzbot+7836a68852a10ec3d790@syzkaller.appspotmail.com
Tested-by: syzbot+7836a68852a10ec3d790@syzkaller.appspotmail.com
Fixes: c63e56a4a652 ("ovl: do not open/llseek lower file with upper sb_writers held")
Fixes: d2c995581c7c ("ovl: Call ovl_create_temp() without lock held.")
Signed-off-by: NeilBrown <neil@brown.name>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
|
|
The "p" pointer is void so sizeof(*p) is 1. The intent was to check
sizeof(*cs_desc), which is 3, instead.
Fixes: ecfd41166b72 ("ALSA: usb-audio: Validate UAC3 cluster segment descriptors")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://patch.msgid.link/aKL5kftC1qGt6lpv@stanley.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
|
|
Since
923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot")
resctrl_cpu_detect() has been moved from common CPU initialization code to
the vendor-specific BSP init helper, while Hygon didn't put that call in their
code.
This triggers a division by zero fault during early booting stage on our
machines with X86_FEATURE_CQM* supported, where get_rdt_mon_resources() tries
to calculate mon_l3_config with uninitialized boot_cpu_data.x86_cache_occ_scale.
Add the missing resctrl_cpu_detect() in the Hygon BSP init helper.
[ bp: Massage commit message. ]
Fixes: 923f3a2b48bd ("x86/resctrl: Query LLC monitoring properties once during boot")
Signed-off-by: Tianxiang Peng <txpeng@tencent.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Hui Li <caelli@tencent.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/20250623093153.3016937-1-txpeng@tencent.com
|
|
The existing memstick core patch: commit 62c59a8786e6 ("memstick: Skip
allocating card when removing host") sets host->removing in
memstick_remove_host(),but still exists a critical time window where
memstick_check can run after host->eject is set but before removing is set.
In the rtsx_usb_ms driver, the problematic sequence is:
rtsx_usb_ms_drv_remove: memstick_check:
host->eject = true
cancel_work_sync(handle_req) if(!host->removing)
... memstick_alloc_card()
memstick_set_rw_addr()
memstick_new_req()
rtsx_usb_ms_request()
if(!host->eject)
skip schedule_work
wait_for_completion()
memstick_remove_host: [blocks indefinitely]
host->removing = true
flush_workqueue()
[block]
1. rtsx_usb_ms_drv_remove sets host->eject = true
2. cancel_work_sync(&host->handle_req) runs
3. memstick_check work may be executed here <-- danger window
4. memstick_remove_host sets removing = 1
During this window (step 3), memstick_check calls memstick_alloc_card,
which may indefinitely waiting for mrq_complete completion that will
never occur because rtsx_usb_ms_request sees eject=true and skips
scheduling work, memstick_set_rw_addr waits forever for completion.
This causes a deadlock when memstick_remove_host tries to flush_workqueue,
waiting for memstick_check to complete, while memstick_check is blocked
waiting for mrq_complete completion.
Fix this by setting removing=true at the start of rtsx_usb_ms_drv_remove,
before any work cancellation. This ensures memstick_check will see the
removing flag immediately and exit early, avoiding the deadlock.
Fixes: 62c59a8786e6 ("memstick: Skip allocating card when removing host")
Signed-off-by: Jiayi Li <lijiayi@kylinos.cn>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250804013604.1311218-1-lijiayi@kylinos.cn
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
|
During SD suspend/resume without a full card rescan (when using
non-removable SD cards for rootfs), the SD card initialization may fail
after resume. This occurs because, after a host controller reset, the
card detect logic may take time to stabilize due to debounce logic.
Without waiting for stabilization, the host may attempt powering up the
card prematurely, leading to command timeouts during resume flow.
Add sdhci_arasan_set_power_and_bus_voltage() to wait for the card detect
stable bit before power up the card. Since the stabilization time
is not fixed, a maximum timeout of one second is used to ensure
sufficient wait time for the card detect signal to stabilize.
Signed-off-by: Sai Krishna Potthuri <sai.krishna.potthuri@amd.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20250730060543.1735971-1-sai.krishna.potthuri@amd.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
|
