| Age | Commit message (Collapse) | Author |
|---|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Add bindings for arm,armv7m-nvic, fsl,icoll, fsl,imx23-digctl, Xilinx
INTC, Analog Devices ADT7411, and a bunch of trivial hwmon devices
- Convert fsl,vf610-mscm-ir, fsl,dsu, via,vt8500-timer, nxp,isp1301,
Marvell Armada NETA and BM, apm,xgene1-msi, fsl,mpic-msi,
himax,hx8357d, and sitronix,st7586 bindings to DT schema format
- Fixes for some display bindings
- More indentation clean-ups in examples
- Add more guidelines and clarifications on writing bindings
* tag 'devicetree-for-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (31 commits)
dt-bindings: Correct indentation and style in DTS example
dt-bindings: display: mediatek,dp: Allow DisplayPort AUX bus
dt-bindings: fsl: convert fsl,vf610-mscm-ir.txt to yaml format
dt-bindings: interrupt-controller: Add fsl,icoll.yaml
dt-bindings: interrupt-controller: Add missing Xilinx INTC binding
dt-bindings: display: sprd,sharkl3-dsi-host: Fix missing clocks constraints
dt-bindings: display: sprd,sharkl3-dpu: Fix missing clocks constraints
dt-bindings: display: imx: convert fsl,dcu.txt to yaml format
dt-bindings: timer: via,vt8500-timer: Convert to YAML
dt-bindings: net: Convert Marvell Armada NETA and BM to DT schema
dt-bindings: trivial-devices: Add undocumented hwmon devices
dt-bindings: interrupt-controller: Convert apm,xgene1-msi to DT schema
dt-bindings: gpu: mali-bifrost: Add Allwinner A523 compatible
docs: dt: writing-schema: Document preferred order of properties
docs: dt: writing-bindings: Document discouraged instance IDs
docs: dt: writing-bindings: Document compatible and filename naming
docs: dt: submitting-patches: Avoid 'YAML' in the subject and add an example
MAINTAINERS: adjust file entry in INTEL STRATIX10 FIRMWARE DRIVERS
docs: dt: writing-bindings: Consistently use single-whitespace
docs: dt: writing-bindings: Express better expectations of "specific"
...
|
|
Like others, the MediaTek DisplayPort controller provides an
auxiliary bus: import the common dp-aux-bus.yaml in this binding
to allow specifying an aux-bus subnode.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Link: https://lore.kernel.org/r/20250724083914.61351-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
'minItems' alone does not impose upper bound, unlike 'maxItems' which
implies lower bound. Add missing clock constraint so the list will have
exact number of items (clocks).
Fixes: 2295bbd35edb ("dt-bindings: display: add Unisoc's mipi dsi controller bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250720123003.37662-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
'minItems' alone does not impose upper bound, unlike 'maxItems' which
implies lower bound. Add missing clock constraint so the list will have
exact number of items (clocks).
Fixes: 8cae15c60cf0 ("dt-bindings: display: add Unisoc's dpu bindings")
Cc: stable@vger.kernel.org
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250720123003.37662-3-krzysztof.kozlowski@linaro.org
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert fsl,dcu.txt to yaml format.
Additional changes:
- remove label in example.
- change node to display-controller in example.
- use 32bit address in example.
- add interrupts property.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Reviewed-by: Stefan Agner <stefan@agner.ch>
Link: https://lore.kernel.org/r/20250616182439.1989840-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Sitronix ST7567 is a monochrome Dot Matrix LCD Controller.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Link: https://lore.kernel.org/r/20250715110411.448343-5-javierm@redhat.com
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
|
|
The Samsung ATNA30DW01 panel is a 13" AMOLED eDP panel. It is similar to
the ATNA33XC20 except that it is smaller and has a higher resolution.
Tested-by: Jérôme de Bretagne <jerome.debretagne@gmail.com>
Signed-off-by: Dale Whinham <daleyo@gmail.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250714173554.14223-3-daleyo@gmail.com
|
|
The "rockchip,dw-mipi-dsi" binding has allOf "snps,dw-mipi-dsi.yaml"
which has allOf "dsi-controller.yaml", which already has #address-cells
and #size-cells defined as '1' and '0' respectively.
So drop this re-definition.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250709132323.128757-4-didi.debian@cknow.org
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.17
CI:
- uprev mesa and ci-templates
- use shallow clone to speed up build jobs
- remove sdm845/cheza jobs. These runners are no more (RIP
dear chezas)
- fix runner tag for i915 cml runners
- uprev igt to pull in msm test fixes
Core:
- VM_BIND support!
- single source of truth for UBWC configuration. Adds a global soc
driver for UBWC config which is used from display and GPU. (And
later vidc/camera/etc)
- Decouple ties between GPU and KMS, adding a `separate_gpu_kms`
modparam to allow the GPU and KMS to bind to separate DRM devices.
This should better deal with more exotic SoC configurations where
the number of GPUs is different from number of DPUs. The default
behavior is to still come up as a single unified DRM device to
avoid surprising userspace.
DP:
- major rework of the I/O accessors
DPU:
- use version checks instead of feature bits
- SM8750 support
- set min_prefill_lines for SC8180X
DSI:
- SM8750 support
GPU:
- speedbin support for X1-85
- X1-45 support
MDSS:
- SM8750 support
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
From: Robin Clark <robin.clark@oss.qualcomm.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CACSVV0217R+kpoWQJeuYGHf6q_4aFyEJuKa=dZZKOnLQzFwppg@mail.gmail.com
|
|
Add MDSS/MDP display subsystem for Qualcomm SM8750 SoC, next generation
with two revisions up of the IP block comparing to SM8650.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659614/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-5-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add DPU for Qualcomm SM8750 SoC which has several differences, new
blocks and changes in registers, making it incompatible with SM8650.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659612/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-4-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add DisplayPort controller for Qualcomm SM8750 SoC which so far looks
fully compatible with earlier SM8650 variant - both are of version
v1.5.1 of the IP block. Datasheet also mentions that both support 4x
MST for DPTX0 and 2x MST for DPTX1.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659611/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-3-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add DSI controller for Qualcomm SM8750 SoC which is quite different from
previous (SM8650) generation.
It does not allow the display clock controller clocks like "byte" and
"pixel" to be reparented to DSI PHY PLLs while the DSI PHY PLL is not
configured (not prepared, rate not set). Therefore
assigned-clock-parents are not working here and driver is responsible
for reparenting clocks with proper procedure. These clocks are now
inputs to the DSI controller device.
Except that SM8750 DSI comes with several differences, new blocks and
changes in registers, making it incompatible with SM8650.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659609/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-2-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Add DSI PHY v7.0 for Qualcomm SM8750 SoC which is quite different from
previous (SM8650) generation.
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Patchwork: https://patchwork.freedesktop.org/patch/659615/
Link: https://lore.kernel.org/r/20250618-b4-sm8750-display-v7-1-a591c609743d@linaro.org
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Although the datasheet of the panel module describes that it has a
reset pin, in the actual hardware design, we often use an RC circuit
to control the reset, and rarely use GPIO to control the reset. This
is the way it is done on our numerous development boards (such as RK3568,
RK3576 EVB).
So make the reset-gpio optional.
Signed-off-by: Andy Yan <andy.yan@rock-chips.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250616070536.670519-1-andyshrk@163.com
|
|
Himax HX83112B is a display driver IC used to drive LCD DSI panels.
Describe it and the Fairphone 3 panel (98-03057-6598B-I) from DJN using
it.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luca Weiss <luca@lucaweiss.eu>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250611-fp3-display-v4-2-ef67701e7687@lucaweiss.eu
|
|
As with the RK3588 SoC, RK3576 also allows the use of HDMI PHY PLL as an
alternative and more accurate pixel clock source for VOP2.
Document the optional PLL clock property.
Moreover, given that this is part of a series intended to address some
recent display problems, provide the appropriate tags to facilitate
backporting.
Fixes: c3b7c5a4d7c1 ("dt-bindings: display: vop2: Add rk3576 support")
Cc: stable@vger.kernel.org
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Tested-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250612-rk3576-hdmitx-fix-v1-1-4b11007d8675@collabora.com
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Convert altr,uart-1.0 and altr,juart-1.0 to DT schema. These were
applied for nios2, but never sent upstream.
- Fix extra '/' in fsl,ls1028a-reset '$id' path
- Fix warnings in ti,sn65dsi83 schema due to unnecessary $ref.
* tag 'devicetree-fixes-for-6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
dt-bindings: serial: Convert altr,uart-1.0 to DT schema
dt-bindings: serial: Convert altr,juart-1.0 to DT schema
dt-bindings: soc: fsl,ls1028a-reset: Drop extra "/" in $id
dt-bindings: drm/bridge: ti-sn65dsi83: drop $ref to fix lvds-vod* warnings
|
|
The OLDI transmitters (TXes) do not have registers of their own, and are
dependent on the source video-ports (VPs) from the DSS to provide
configuration data. This hardware doesn't directly sit on the internal
bus of the SoC, but does so via the DSS. Hence, the OLDI TXes are
supposed to be child nodes under the DSS, and not independent devices.
Two of the OLDI TXes can function in tandem to output dual-link OLDI
output, or cloned single-link outputs. In these cases, one OLDI will be
the primary OLDI, and the other one, a companion. The following diagram
represents such a configuration.
+-----+-----+ +-------+
| | | | |
| | VP1 +----+--->+ OLDI0 | (Primary - may need companion)
| | | | | |
| DSS +-----+ | +-------+
| | | |
| | VP2 | | +-------+
| | | | | |
+-----+-----+ +--->+ OLDI1 | (Companion OLDI)
| |
+-------+
The DSS in AM625 SoC has a configuration like the one above. The AM625
DSS VP1 (port@0) can connect and control 2 OLDI TXes, to use them in
dual-link or cloned single-link OLDI modes. It is only the VP1 that can
connect to either OLDI TXes for the AM625 DSS, and not the VP2.
Alternatively, on some future TI SoCs, along with the above
configuration, the OLDI TX can _also_ connect to separate video sources,
making them work entirely independent of each other. In this case,
neither of the OLDIs are "companion" or "secondary" OLDIs, and nor do
they require one. They both are independent and primary OLDIs. The
following diagram represents such a configuration.
+-----+-----+ +-------+
| | | | |
| | VP1 +--+----------->+ OLDI0 | (Primary - may need companion)
| | | | | |
| +-----+ | +-------+
| | | |
| | VP2 | |
| | | |
| DSS +-----+ | +---+ +-------+
| | | +-->+ M | | |
| | VP3 +----->+ U +--->+ OLDI1 | (Companion or Primary)
| | | | X | | |
| +-----+ +---+ +-------+
| | |
| | VP4 |
| | |
+-----+-----+
Note that depending on the mux configuration, the OLDIs can either be
working together in tandem - sourced by VP1, OR, they could be working
independently sourced by VP1 and VP3 respectively.
The idea is to support all the configurations with this OLDI TX schema.
The OLDI functionality is further supported by a system-control module,
which contains a few registers to control OLDI IO power and other
electrical characteristics of the IO lanes.
Add devicetree binding schema for the OLDI TXes to support various
configurations, and extend their support to the AM625 DSS.
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Reviewed-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Link: https://lore.kernel.org/r/20250528122544.817829-3-aradhya.bhatia@linux.dev
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Reduce tab size from 8 spaces to 4 spaces to make the bindings
consistent, and easy to expand.
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Link: https://lore.kernel.org/r/20250528122544.817829-2-aradhya.bhatia@linux.dev
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
Backmerging to forward to v6.16-rc1
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
|
|
Document the 7" Raspberry Pi 720x1280 DSI panel based on ili9881.
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608142908.54121-1-marek.vasut+renesas@mailbox.org
|
|
The Winstar wf40eswaa6mnn0 panel is a square 4.0" TFT LCD with a
resolution of 480x480 pixels.
Signed-off-by: Stefan Eichenberger <eichest@gmail.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250606114644.105371-3-eichest@gmail.com
|
|
Document a new compatible string for the second panel variant.
Signed-off-by: Caleb Connolly <caleb@connolly.tech>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250509-topic-misc-shift6-panel-v2-1-c2c2d52abd51@linaro.org
|
|
Convert himax,hx8357d.txt to yaml format.
Additional changes:
- add spi parent node in examples.
- ref to spi-peripheral-props.yaml.
- change himax,hx8357a to himax,hx8357 to align driver and existed dts.
- add himax,hx8369a and fallback to himax,hx8369.
- allow spi-cpha and spi-cpol to align existed dts.
- add im-gpios for interface selections.
- add reset-gpios.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250602152814.949671-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Allow resets property to fix below CHECK_DTB warning:
arch/arm/boot/dts/nxp/lpc/lpc4337-ciaa.dtb: lcd-controller@40008000 (arm,pl111): 'resets' does not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250602144906.944866-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Convert the sitronix,st7586 binding documentation from .txt to .yaml.
Also added a link to the datasheet while we are touching this.
Signed-off-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20250530-devicetree-convert-sitronix-st7586-to-yaml-v1-1-c132b512ec57@baylibre.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Allow lcd panel related property for imx28 and keep the same restriction
for other platform. It is legancy platform and set these property to
deprecated.
Fix below CHECK_DTB warnings:
arch/arm/boot/dts/nxp/mxs/imx28-apx4devkit.dtb: lcdif@80030000 (fsl,imx28-lcdif): 'display', 'display0' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20250529200520.798117-1-Frank.Li@nxp.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The kernel test robot reported a warning related to the use of "$ref"
type definitions for custom endpoint properties
- "ti,lvds-vod-swing-clock-microvolt" and
- "ti,lvds-vod-swing-data-microvolt".
Using "$ref" with "uint32-array" is not correctly handled in this
context. Removing "$ref" and relying solely on "maxItems: 2" enforces
the intended requirement of specifying exactly two values, without
triggering a schema validation warning.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202505021937.efnQPPqx-lkp@intel.com/
Signed-off-by: Andrej Picej <andrej.picej@norik.com>
Link: https://lore.kernel.org/r/20250529053654.1754926-1-andrej.picej@norik.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
Add compatible string for the Huiling hl055fhav028c. This panel is
based on the Himax HX8399C display controller which is extremely
similar to the existing HX8394. Add a new constant for
himax,hx8399c for this new display controller as well.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250603193930.323607-3-macroalpha82@gmail.com
|
|
Add AUO P238HAN01 23.8" 1920x1080 LVDS panel compatible string.
Signed-off-by: Michael Walle <mwalle@kernel.org>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250520074439.655749-1-mwalle@kernel.org
|
|
Christian needs a recent drm-next branch to merge fence patches.
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
The Allwinner H616 and variants have a new display engine revision
(DE33).
The mixer configuration registers are significantly different to the DE3
and DE2 revisions, being split into separate top and display blocks,
therefore a fallback for the mixer compatible is not provided.
Note that the DE33 mixer requires 3 register blocks instead of 1. To
keep things simple the maxItems value for registers is conditionally
removed for the H616 and replaced with the block names from the vendor
BSP kernel.
Add a display engine mixer binding for the DE33.
Signed-off-by: Ryan Walklin <ryan@testtoast.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20250528092431.28825-6-ryan@testtoast.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull non-MM updates from Andrew Morton:
- "hung_task: extend blocking task stacktrace dump to semaphore" from
Lance Yang enhances the hung task detector.
The detector presently dumps the blocking tasks's stack when it is
blocked on a mutex. Lance's series extends this to semaphores
- "nilfs2: improve sanity checks in dirty state propagation" from
Wentao Liang addresses a couple of minor flaws in nilfs2
- "scripts/gdb: Fixes related to lx_per_cpu()" from Illia Ostapyshyn
fixes a couple of issues in the gdb scripts
- "Support kdump with LUKS encryption by reusing LUKS volume keys" from
Coiby Xu addresses a usability problem with kdump.
When the dump device is LUKS-encrypted, the kdump kernel may not have
the keys to the encrypted filesystem. A full writeup of this is in
the series [0/N] cover letter
- "sysfs: add counters for lockups and stalls" from Max Kellermann adds
/sys/kernel/hardlockup_count and /sys/kernel/hardlockup_count and
/sys/kernel/rcu_stall_count
- "fork: Page operation cleanups in the fork code" from Pasha Tatashin
implements a number of code cleanups in fork.c
- "scripts/gdb/symbols: determine KASLR offset on s390 during early
boot" from Ilya Leoshkevich fixes some s390 issues in the gdb
scripts
* tag 'mm-nonmm-stable-2025-05-31-15-28' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (67 commits)
llist: make llist_add_batch() a static inline
delayacct: remove redundant code and adjust indentation
squashfs: add optional full compressed block caching
crash_dump, nvme: select CONFIGFS_FS as built-in
scripts/gdb/symbols: determine KASLR offset on s390 during early boot
scripts/gdb/symbols: factor out pagination_off()
scripts/gdb/symbols: factor out get_vmlinux()
kernel/panic.c: format kernel-doc comments
mailmap: update and consolidate Casey Connolly's name and email
nilfs2: remove wbc->for_reclaim handling
fork: define a local GFP_VMAP_STACK
fork: check charging success before zeroing stack
fork: clean-up naming of vm_stack/vm_struct variables in vmap stacks code
fork: clean-up ifdef logic around stack allocation
kernel/rcu/tree_stall: add /sys/kernel/rcu_stall_count
kernel/watchdog: add /sys/kernel/{hard,soft}lockup_count
x86/crash: make the page that stores the dm crypt keys inaccessible
x86/crash: pass dm crypt keys to kdump kernel
Revert "x86/mm: Remove unused __set_memory_prot()"
crash_dump: retrieve dm crypt keys in kdump kernel
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are 11 newly supported SoCs, but these are all either new
variants of existing designs, or straight reuses of the existing chip
in a new package:
- RK3562 is a new chip based on the old Cortex-A53 core, apparently a
low-cost version of the Cortex-A55 based RK3568/RK3566.
- NXP i.MX94 is a minor variation of i.MX93/i.MX95 with a different
set of on-chip peripherals.
- Renesas RZ/V2N (R9A09G056) is a new member of the larger RZ/V2
family
- Amlogic S6/S7/S7D
- Samsung Exynos7870 is an older chip similar to Exynos7885
- WonderMedia wm8950 is a minor variation on the wm8850 chip
- Amlogic s805y is almost idential to s805x
- Allwinner A523 is similar to A527 and T527
- Qualcomm MSM8926 is a variant of MSM8226
- Qualcomm Snapdragon X1P42100 is related to R1E80100
There are also 65 boards, including reference designs for the chips
above, this includes
- 12 new boards based on TI K3 series chips, most of them from
Toradex
- 10 devices using Rockchips RK35xx and PX30 chips
- 2 phones and 2 laptops based on Qualcomm Snapdragon designs
- 10 NXP i.MX8/i.MX9 boards, mostly for embedded/industrial uses
- 3 Samsung Galaxy phones based on Exynos7870
- 5 Allwinner based boards using a variety of ARMv8 chips
- 9 32-bit machines, each based on a different SoC family
Aside from the new hardware, there is the usual set of cleanups and
newly added hardware support on existing machines, for a total of 965
devicetree changesets"
* tag 'soc-dt-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (956 commits)
MAINTAINERS, mailmap: update Sven Peter's email address
arm64: dts: renesas: rzg3e-smarc-som: Reduce I2C2 clock frequency
arm64: dts: nuvoton: Add pinctrl
ARM: dts: samsung: sp5v210-aries: Align wifi node name with bindings
arm64: dts: blaize-blzp1600: Enable GPIO support
dt-bindings: clock: socfpga: convert to yaml
arm64: dts: rockchip: move rk3562 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3562 pcie unit addresses
arm64: dts: rockchip: move rk3528 pinctrl node outside the soc node
arm64: dts: rockchip: remove a double-empty line from rk3576 core dtsi
arm64: dts: rockchip: move rk3576 pinctrl node outside the soc node
arm64: dts: rockchip: fix rk3576 pcie unit addresses
arm64: dts: rockchip: Drop assigned-clock* from cpu nodes on rk3588
arm64: dts: rockchip: Add missing SFC power-domains to rk3576
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
"DT Bindings:
- Convert all remaining interrupt-controller bindings to DT schema
- Convert Rockchip CDN-DP and Freescale TCON, M4IF, TigerP, LDB, PPC
PMC, imx-drm, and ftm-quaddec to DT schema
- Add bindings for fsl,vf610-pit, fsl,ls1021a-wdt, sgx,vz89te,
maxim,max30208, ti,lp8864, and fairphone,fp5-sndcard
- Add top-level constraints for renesas,vsp1 and renesas,fcp
- Add missing constraint in amlogic,pinctrl-a4 'group' nodes
- Adjust the allowed properties for dwc3-xilinx, sony,imx219,
pci-iommu, and renesas,dsi
- Add EcoNet vendor prefix
- Fix the reserved-memory.yaml in fsl,qman-fqd
- Drop obsolete numa.txt and cpu-topology.txt which are schemas in
dtschema now
- Drop Renesas RZ/N1S bindings
- Ensure Arm cpu nodes don't allow undocumented properties. Add all
the properties which are in use and undocumented. Drop the Mediatek
cpufreq binding which is not a binding, but just what DT properties
the driver uses.
- Add compatibles for Renesas RZ/G3E and RZ/V2N Mali Bifrost GPU
- Update documentation on defining child nodes with separate schemas
- Add bindings to PSCI MAINTAINERS entry
DT core:
- Add new functions to simplify driver handling of 'memory-region'
properties. Users to be added next cycle.
- Simplify of_dma_set_restricted_buffer() to use
of_for_each_phandle()
- Add missing unlock on error in unittest_data_add()"
* tag 'devicetree-for-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (87 commits)
dt-bindings: timer: Add fsl,vf610-pit.yaml
dt-bindings: gpu: mali-bifrost: Add compatible for RZ/G3E SoC
ASoC: dt-bindings: qcom,sm8250: Add Fairphone 5 sound card
dt-bindings: arm/cpus: Allow 2 power-domains entries
dt-bindings: usb: dwc3-xilinx: allow dma-coherent
media: dt-bindings: sony,imx219: Allow props from video-interface-devices
dt-bindings: soundwire: qcom: Document v2.1.0 version of IP block
dt-bindings: watchdog: fsl-imx-wdt: add compatible string fsl,ls1021a-wdt
dt-bindings: pinctrl: amlogic,pinctrl-a4: Add missing constraint on allowed 'group' node properties
dt-bindings: display: rockchip: Convert cdn-dp-rockchip.txt to yaml
dt-bindings: display: bridge: renesas,dsi: allow properties from dsi-controller
dt-bindings: trivial-devices: Add VZ89TE to trivial
media: dt-bindings: renesas,vsp1: add top-level constraints
media: dt-bindings: renesas,fcp: add top-level constraints
dt-bindings: trivial-devices: Add Maxim max30208
dt-bindings: soc: fsl,qman-fqd: Fix reserved-memory.yaml reference
dt-bindings: interrupt-controller: Convert ti,omap-intc-irq to DT schema
dt-bindings: interrupt-controller: Convert ti,omap4-wugen-mpu to DT schema
dt-bindings: interrupt-controller: Convert ti,keystone-irq to DT schema
dt-bindings: interrupt-controller: Convert technologic,ts4800-irqc to DT schema
...
|
|
The DU block on the RZ/V2H(P) SoC is identical to the one found on the
RZ/G2L SoC. However, it only supports the DSI interface, whereas the
RZ/G2L supports both DSI and DPI interfaces.
Due to this difference, a SoC-specific compatible string
'renesas,r9a09g057-du' is added for the RZ/V2H(P) SoC.
Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20250512182330.238259-2-prabhakar.mahadev-lad.rj@bp.renesas.com
|
|
R69328 is liquid crystal driver for high-definition amorphous silicon
(a-Si) panels and is ideal for tablets and smartphones.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250506092718.106088-4-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
R61307 is liquid crystal driver for high-definition amorphous silicon
(a-Si) panels and is ideal for tablets and smartphones.
Signed-off-by: Svyatoslav Ryhel <clamor95@gmail.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20250506092718.106088-2-clamor95@gmail.com
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
|
|
Convert cdn-dp-rockchip.txt to yaml.
Add new "port@1" property which represents the CDN DP output to keep
the same style as the other display interfaces.
This patch also changes the constraints for "phys" and "extcon". For
the original binding, only one phy and the corresponding extcon can
be specified. In the new binding, one or two phys can be specified.
Since the RK3399 has two DP-USB PHYs, specifying one allows output
via the corresponding PHY, while specifying two lets the driver
choose one PHY for output. This rule also applies to extcon, which
provides the cable state for the corresponding PHY.
Signed-off-by: Chaoyi Chen <chaoyi.chen@rock-chips.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250520024718.142-3-kernel@airkyi.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
Additional MediaTek ARM64 DTS updates for v6.16
This addresses devicetree binding warnings happening on the
MDP3 nodes in mt8188 dts, reverts the commit adding the SCP
firmware-name as strongly suggested by Arnd, and also adds
some more late commits.
In particular:
- MT6359 PMIC
- Renamed PMIC RTC node to fix dtbs_check warning
- MT7988(A)
- Support for SPI controllers was added to SoC and BPI-R4
- Support for XSPHY, USB and PCIe2 was added as well
- Fan and cooling maps were added to BPI-R4 machine
- Added BananaPi R4 2G5 machine variant
- MT8365
- Added touchscreen support to MT8365 Genio EVK
- MT8188
- Addressed dtbs_check warnings for MDP3 nodes
- MT8390 (Genio)
- Reverted SCP firmware-name addition
* tag 'mtk-dts64-for-v6.16-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux: (42 commits)
Revert "arm64: dts: mediatek: mt8390-genio-common: Add firmware-name for scp0"
arm64: dts: mediatek: mt8188: Address binding warnings for MDP3 nodes
arm64: dts: mt6359: Rename RTC node to match binding expectations
arm64: dts: mt8365-evk: Add goodix touchscreen support
arm64: dts: mediatek: mt8188: Add missing #reset-cells property
arm64: dts: airoha: en7581: Add PCIe nodes to EN7581 SoC evaluation board
arm64: dts: airoha: en7581: Add gpio-ranges property for gpio controller
arm64: dts: mediatek: mt7988a-bpi-r4: configure spi-nodes
arm64: dts: mediatek: mt7988a-bpi-r4: Add fan and coolingmaps
arm64: dts: mediatek: mt7988: add phy calibration efuse subnodes
arm64: dts: mediatek: mt7988: move uart0 and spi1 pins to soc dtsi
arm64: dts: mediatek: mt7988: add spi controllers
arm64: dts: mediatek: mt7988a-bpi-r4: enable xsphy
arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2
arm64: dts: mediatek: mt7988a-bpi-r4: allow hw variants of bpi-r4
dt-bindings: arm: mediatek: add bpi-r4 2g5 phy variant
arm64: dts: mt6359: Add missing 'compatible' property to regulators node
arm/arm64: dts: mediatek: Add missing "#sound-dai-cells" to linux,bt-sco
arm64: dts: mediatek: mt8390-genio-common: Set ssusb2 default dual role mode to host
arm64: dts: mediatek: mt8395-genio-1200-evk: Disable unused backlight
...
Link: https://lore.kernel.org/r/20250520114356.1194450-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
I've used several email addresses and a previous name to contribute.
Consolidate all of these to my primary email and update my name.
Link: https://lkml.kernel.org/r/20250517223237.15647-2-casey.connolly@linaro.org
Signed-off-by: Casey Connolly <casey.connolly@linaro.org>
Cc: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
|
|
Allow to inherit valid properties from the dsi-controller. This fixes the
following warning when adding a panel property:
rzg2lc.dtb: dsi@10850000: '#address-cells', '#size-cells', 'panel@0' do not
match any of the regexes: 'pinctrl-[0-9]+'
from schema $id:
http://devicetree.org/schemas/display/bridge/renesas,dsi.yaml#
Also add a panel property to the example.
Signed-off-by: Hugo Villeneuve <hvilleneuve@dimonoff.com>
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Link: https://lore.kernel.org/r/20250520151112.3278569-1-hugo@hugovil.com
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
|
|
The DSS controller on TI's AM62L SoC is an update from that on TI's
AM625/AM65x/AM62A7 SoC. The AM62L DSS [1] only supports a single display
pipeline using a single overlay manager, single video port and a single
video lite pipeline which does not support scaling.
The output of video port is routed to SoC boundary via DPI interface and
the DPI signals from the video port are also routed to DSI Tx controller
present within the SoC.
[1]: Section 11.7 (Display Subsystem and Peripherals)
Link : https://www.ti.com/lit/pdf/sprujb4
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Reviewed-by: Jayesh Choudhary <j-choudhary@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250507180631.874930-2-devarsht@ti.com
Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
|
|
https://gitlab.freedesktop.org/drm/msm into drm-next
Updates for v6.16
CI:
- uprev mesa
GPU:
- ACD (Adaptive Clock Distribution) support for X1-85. This is required
enable the higher frequencies.
- Drop fictional `address_space_size`. For some older devices, the address
space size is limited to 4GB to avoid potential 64b rollover math problems
in the fw. For these, an `ADRENO_QUIRK_4GB_VA` quirk is added. For
everyone else we get the address space size from the SMMU `ias` (input
address sizes), which is usually 48b.
- Improve robustness when GMU HFI responses time out
- Fix crash when throttling GPU immediately during boot
- Fix for rgb565_predicator on Adreno 7c3
- Remove `MODULE_FIRMWARE()`s for GPU, the GPU can load the firmware after
probe and having partial set of fw (ie. sqe+gmu but not zap) causes problems
MDSS:
- Added SAR2130P support to MDSS driver
DPU:
- Changed to use single CTL path for flushing on DPU 5.x+
- Improved SSPP allocation code to allow sharing of SSPP between planes
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- Misc fixes
DP:
- Switch to use new helpers for DP Audio / HDMI codec handling
- Fixed LTTPR handling
DSI:
- Added support for SA8775P
- Added SAR2130P support
MDP4:
- Fixed LCDC / LVDS controller on
HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://lore.kernel.org/r/CAF6AEGv2Go+nseaEwRgeZbecet-h+Pf2oBKw1CobCF01xu2XVg@mail.gmail.com
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/chunkuang.hu/linux into drm-next
Mediatek DRM Next - 20250515
1. Prepare for support MT8195/88 HDMIv2 and DDCv2
2. DPI: Cleanups and add support for more formats
3. Cleanups and sanitization
4. Replace custom compare_dev with component_compare_of
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Chun-Kuang Hu <chunkuang.hu@kernel.org>
Link: https://lore.kernel.org/r/20250514233647.15907-1-chunkuang.hu@kernel.org
|
|
i.MX8qxp Display Controller(DC) is comprised of three main components that
include a blit engine for 2D graphics accelerations, display controller for
display output processing, as well as a command sequencer.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-9-victor.liu@nxp.com
|
|
i.MX8qxp Display Controller contains a command sequencer is designed to
autonomously process command lists.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-7-victor.liu@nxp.com
|
|
counter
i.MX8qxp Display Controller contains a AXI performance counter which allows
measurement of average bandwidth and latency during operation.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://lore.kernel.org/r/20250414035028.1561475-6-victor.liu@nxp.com
|
