| Age | Commit message (Collapse) | Author |
|---|
|
CIX SKY1 SoC is high performance Armv9 SoC designed by Cixtech,
and Orion O6 is the motherboard launched by Radxa. See below for
detail:
https://docs.radxa.com/en/orion/o6/getting-started/introduction
In this commit, it only adds limited components for running initramfs
at Orion O6.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-by: Enric Balletbo i Serra <eballetb@redhat.com>
Tested-by: Kajetan Puchalski <kajetan.puchalski@arm.com>
Signed-off-by: Peter Chen <peter.chen@cixtech.com>
Signed-off-by: Guomin Chen <Guomin.Chen@cixtech.com>
Signed-off-by: Gary Yang <gary.yang@cixtech.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux into soc/dt
MediaTek ARM64 DeviceTree updates for v6.17
This adds new machines and improves support for already supported
MediaTek SoCs.
In particular:
- New machine: MT8186 Steelix Squirtle Chromebook
- Steelix-Voltorb's two dts are merged in one
...and improvements for already supported SoCs and machines:
- Added reserved memory for AFE DMA for MT8173/83/86/92,
aligning audio related memory allocation between all of
the Chromebook SoCs
- Added second source components for Steelix, and marked the
multiple trackpads for Asurada as such
- MediaTek Genio 1200: Enabled support for the Audio DSP and sound
- MediaTek Genio 510/700/1200: Added support for the PMIC Keys
- MediaTek MT7988: Added Cache Coherent Interconnect for CPU DVFS
- MT7988A-BananaPi-R4: Enabled CCI, added GPIO LEDs
- Airoha EN7581: Added ethernet nodes to Evaluation Board
* tag 'mtk-dts64-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/mediatek/linux:
arm64: dts: mediatek: mt8395-genio-1200-evk: Add MT6359 PMIC key support
arm64: dts: mediatek: mt8390-genio-common: Add Home MT6359 PMIC key support
arm64: dts: mediatek: mt7988a-bpi-r4: add gpio leds
arm64: dts: mediatek: mt7988a-bpi-r4: drop unused pins
arm64: dts: mediatek: mt7988a-bpi-r4: add proc-supply for cci
arm64: dts: mediatek: mt7988: add cci node
dt-bindings: interconnect: add mt7988-cci compatible
arm64: dts: airoha: en7581: Add ethernet nodes to EN7581 SoC evaluation board
arm64: dts: mediatek: mt8192-asurada-spherion: Mark trackpads as fail-needs-probe
arm64: dts: mediatek: mt8186: Add Squirtle Chromebooks
arm64: dts: mediatek: mt8186: Merge Voltorb device trees
arm64: dts: mediatek: mt8186-steelix: Mark second source components for probing
dt-bindings: arm: mediatek: Add MT8186 Squirtle Chromebooks
dt-bindings: arm: mediatek: Merge MT8186 Voltorb entries
arm64: dts: mediatek: mt8395-genio-1200-evk: Enable Audio DSP and sound card
arm64: dts: mediatek: mt8192-asurada: Reserve memory for audio frontend
arm64: dts: mediatek: mt8186-corsola: Reserve memory for audio frontend
arm64: dts: mediatek: mt8183-kukui: Reserve memory for audio frontend
arm64: dts: mediatek: mt8173: Reserve memory for audio frontend
Link: https://lore.kernel.org/r/20250711083656.33538-3-angelogioacchino.delregno@collabora.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32 into soc/dt
STM32 DT for v6.17, round 1
Highlights:
----------
- MPU:
- STM32MP13:
-Add Ethernet MAC adress efuse support.
- STMP32MP15:
- Add stm32mp157f-DK2 board support. This board embedds the same
conectivity devices, DDR ... than stm32mp157c-dk2.
However there are two differences: STM32MP157F SoC which allows
overdrive OPP and the SCMI support for system features like
clocks and regulators.
- STM32MP25:
- Fix tick timer for low power use cases.
- Add timer support.
* tag 'stm32-dt-for-v6.17-1' of https://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32:
arm64: dts: st: remove empty line in stm32mp251.dtsi
arm64: dts: st: fix timer used for ticks
arm64: defconfig: Enable STM32 Octo Memory Manager and OcstoSPI driver
ARM: dts: stm32: add stm32mp157f-dk2 board support
dt-bindings: arm: stm32: add STM32MP157F-DK2 board compatible
ARM: dts: stm32: optee async notif interrupt for MP15 scmi variants
ARM: dts: stm32: use internal regulators bindings for MP15 scmi variants
dt-bindings: regulator: Add STM32MP15 SCMI regulator identifiers
ARM: dts: stm32: use 'typec' generic name for stusb1600 on stm32mp15xx-dkx
ARM: dts: stm32: fullfill diversity with OPP for STM32M15xF SOCs
ARM: dts: stm32: add system-clock-direction-out on stm32mp15xx-dkx
arm64: defconfig: enable STM32 timers drivers
arm64: dts: st: add timer nodes on stm32mp257f-ev1
arm64: dts: st: add timer pins for stm32mp257f-ev1
arm64: dts: st: add timer nodes on stm32mp251
ARM: dts: stm32: Add nvmem-cells to ethernet nodes for constant mac-addresses
Link: https://lore.kernel.org/r/b3e3363b-1ea5-457c-b244-2cbe26f7d6e4@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New boards: ROC-RK3588S-PC, Luckfox Omni3576, Radxa Rock 5T,
Sakura Pi RK3308B - all of them have the used soc in their name.
New overlays: RockPro64 screen, optional Sige5 Wifi/BT module,
ethernet-switch addon for Jaguar.
Added peripherals on rk3528 (spi, power-domain controller, gpu)
and sdio controller on rk3576.
DSI display support for the Gameforce-ACE handheld, a fix for the
cover-detection (closed/open) on the PineNote, camera support for
the Haikou Video Demo overlay on PX30 Ringneck as well as a number
of other newly enabled peripherals on a number of boards.
* tag 'v6.17-rockchip-dts64-1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (40 commits)
arm64: dts: rockchip: Enable eMMC HS200 mode on Radxa E20C
arm64: dts: rockchip: Add bluetooth support to ArmSoM Sige7
arm64: dts: rockchip: enable PCIe on ROCK 4D
arm64: dts: rockchip: Enable HDMI receiver on CM3588
arm64: dts: rockchip: Add HDMI PHY PLL clock source to VOP2 on rk3576
arm64: dts: rockchip: Enable HDMI PHY clk provider on rk3576
arm64: dts: rockchip: add DTs for Firefly ROC-RK3588S-PC
dt-bindings: arm: rockchip: Add Firefly ROC-RK3588S-PC
arm64: dts: rockchip: Enable GPU on Radxa E20C
arm64: dts: rockchip: Add GPU node for RK3528
arm64: dts: rockchip: support camera module on Haikou Video Demo on PX30 Ringneck
arm64: dts: rockchip: add label to first port of ISP on px30
arm64: dts: rockchip: fix endpoint dtc warning for PX30 ISP
arm64: dts: rockchip: Add power controller for RK3528
arm64: dts: rockchip: enable USB on Sige5
arm64: dts: rockchip: add overlay for the WiFi/BT module on Sige5 v1.2
arm64: dts: rockchip: add version-independent WiFi/BT nodes on Sige5
arm64: dts: rockchip: add SDIO controller on RK3576
arm64: dts: rockchip: Enable gpu on rk3576-evb1-v10
arm64: dts: rockchip: Update the PinePhone Pro panel description
...
Link: https://lore.kernel.org/r/15465458.uLZWGnKmhe@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Arm GIC "ppi-partitions" node is only relevant to GICv3 and makes no
sense for GICv2 implementations which the GIC-400 is. PPIs in GICv2 have
no CPU affinity.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20250609203721.2852879-1-robh@kernel.org
Signed-off-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Link: https://lore.kernel.org/r/20250710-nuvoton-arm64-dt-v1-1-ec7db96ea507@codeconstruct.com.au
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into soc/dt
Renesas DTS updates for v6.17 (take two)
- Add support for the Renesas Gray Hawk Single board with R-Car
V4M-7 (R8A779H2),
- Add eMMC and microSD expansion board support for the RZ/V2H and
RZ/V2N EVK development boards,
- Add GPIO keys and Ethernet support for the RZ/G3E SoM and SMARC
Carrier-II EVK development board,
- Add QSPI FLASH support for the RZ/V2H and RZ/V2N SoCs and their EVK
development boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-dts-for-v6.17-tag2' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Enable serial NOR FLASH
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Enable serial NOR FLASH
arm64: dts: renesas: r9a09g057: Add XSPI node
arm64: dts: renesas: r9a09g056: Add XSPI node
arm64: dts: renesas: r9a09g056n48-rzv2n-evk: Fix pinctrl node name for GBETH1
arm64: dts: renesas: r9a09g057h44-rzv2h-evk: Fix pinctrl node name for GBETH1
arm64: dts: renesas: r8a779g3-sparrow-hawk-fan-pwm: Add missing install target
arm64: dts: renesas: rzg3e-smarc-som: Enable eth{0-1} (GBETH) interfaces
arm64: dts: renesas: r9a09g047e57-smarc: Add gpio keys
arm64: dts: renesas: Add CN15 eMMC and SD overlays for RZ/V2H and RZ/V2N EVKs
arm64: dts: renesas: r8a779h2: Add Gray Hawk Single support
arm64: dts: renesas: Add Renesas R8A779H2 SoC support
arm64: dts: renesas: Factor out Gray Hawk Single board support
dt-bindings: clock: renesas,r9a09g056/57-cpg: Add XSPI core clock
Link: https://lore.kernel.org/r/cover.1752090401.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into soc/dt
Samsung DTS ARM64 changes for v6.17
1. New SoC - Exynos2200 SoC - with basic nodes, pin controllers,
clock controllers and initial USB support. Add board using it:
Samsung Galaxy S22+ (SM-S906B), called G0S.
2. ExynosAutov920: Add CMU_HSI2 clock controller, remaining SPI nodes
3. Google GS101:
- Prepare to switching to architected timer, instead of Exynos MCT as
the primary one.
- Add secondary Maxim MAX77759 PMIC to Pixel boards, managing USB Type-C and
charger.
- Add incomplete description of the primary Samsung S2MPG10 PMIC.
Several bits, like regulators, are still missing, though.
- Add also secondary reboot-mode, via MAX77759 NVMEM.
- Switch the primary (SoC) reboot handler to Google specific
google,gs101-reboot which gives additional GS101 features (cold and
warm reboots).
This change will affect other users of this DTS, but to our
knowledge there is only Android, from which this change originates.
4. Exynos7870:
- Fix speed problems in USB gadget mode.
- Correct memory map to avoid crashes due to secure world.
* tag 'samsung-dt64-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos7870-j6lte: reduce memory ranges to base amount
arm64: dts: exynos7870-on7xelte: reduce memory ranges to base amount
arm64: dts: exynos7870: add quirk to disable USB2 LPM in gadget mode
arm64: dts: exynos: gs101: switch to gs101 specific reboot
arm64: dts: exynos: gs101-pixel-common: add main PMIC node
arm64: dts: exynos: gs101: ufs: add dma-coherent property
arm64: dts: exynos: gs101: add dm-verity-device-corrupted syscon-reboot-mode
arm64: dts: exynos: gs101-pixel-common: add nvmem-reboot-mode
arm64: dts: exynos: gs101-pixel-common: add Maxim MAX77759 PMIC
arm64: dts: exynos5433: Align i2c-gpio node names with dtschema
arm64: dts: exynos: gs101: Add 'local-timer-stop' to cpuidle nodes
arm64: dts: exynosautov920: Add DT node for all SPI ports
arm64: dts: exynosautov920: add CMU_HSI2 clock DT nodes
MAINTAINERS: add entry for Samsung Exynos2200 SoC
arm64: dts: exynos: add initial support for Samsung Galaxy S22+
arm64: dts: exynos: add initial support for exynos2200 SoC
dt-bindings: arm: samsung: document g0s board binding
Link: https://lore.kernel.org/r/20250709191523.171359-6-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
We need the USB/Thunderbolt fixes in here for other patches to be on top
of.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Allwinner fixes for 6.16
Only one fix:
Correct the name of the A523's EMAC0 to GMAC0, as seen in the SoC's
datasheets. The matching DT binding change is in the net tree.
* tag 'sunxi-fixes-for-6.16' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: a523: Rename emac0 to gmac0
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Both the R5S and R5C have a MASKROM button connected via saradc.
For both the R5S as the R5C it's described on page 9 of their
respective schematic, identified as 'Recovery'.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250716083355.327451-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The regulator-compatible property has never existed in the
regulator/fcs,fan53555.yaml binding, so drop it.
This fixes the following DTB validation warnings:
Unevaluated properties are not allowed
('regulator-compatible' was unexpected)
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-11-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
On nodes with compatible "rockchip,px30-usb2phy-grf", the #address-cells
and #size-cells are required and consequently their child nodes should
have unit addresses. That is not the case for the px30-pmugrf and
px30-grf nodes, so remove them there.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-10-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The MIPI DSI connector on the PineTab2 only has 1 port with 1 endpoint,
so drop the unit-address properties.
While at it, move 'rotation' property to its proper sorting position.
This fixes the following DTB validation warnings:
node has a unit name, but no reg or ranges property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-9-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
According to the DTS coding style [1] referenced nodes should be sorted
alpha-numerically so move mipi_out to be after mipi_in_panel.
[1] https://www.kernel.org/doc/html/latest/devicetree/bindings/dts-coding-style.html#order-of-nodes
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250709132323.128757-8-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The only thing actually added here is a single endpoint on mipi_out,
which is already defined in rk3399-base.dtsi, so it's simpler to just
reference that phandle, which allows the removal of several properties.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-7-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The only thing actually added here is a single endpoint on edp_out,
which is already defined in rk3399-base.dtsi, so it's simpler to just
reference that phandle, which allows the removal of several properties.
This fixes the following DTB validation warnings:
graph node has single child node 'endpoint@0',
#address-cells/#size-cells are not necessary
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-6-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
When there's only 1 endpoint, there is no need for a unit-address and
removing that allows removing of related properties as well.
This fixes the following DTB validation warnings:
graph node has single child node 'endpoint@0',
#address-cells/#size-cells are not necessary
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-5-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
All devices based on the A523/A527/H728/T527 processors contain a G57 MC1 GPU.
Enable the DT nodes for this GPU and specify a regulator that supplies power
to the SoC's VDD_GPU pins. The other parameters are set in the SoC dtsi,
so are board independent.
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250711035730.17507-4-iuncuim@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The Allwinner A523 SoC features the Mali-G57 MC1 GPU, which belongs
to the Mali Valhall (v9) family. There is a power domain specifically
for this GPU that needs to be enabled to utilize it.
To enable in a specific device, we need to enable the gpu node and specify
the “mali-supply” regulator additionally in the device tree.
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250711035730.17507-3-iuncuim@gmail.com
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The A523 SoC family has two power controllers, one based on the existing
PPU, and one newer one based on ARM's PCK-600.
Add device nodes for both of them.
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250712074021.805953-6-wens@kernel.org
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The #address-cells and #size-cells properties are not useful on the DSI
controller node; they are only useful/required on ports and panel(s).
So remove them from the controller node and add them where actually
needed on the various rk3399 based boards.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-3-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The #address-cells and #size-cells properties are not useful on the DSI
controller node; they are only useful/required on ports and panel(s).
So remove them from the controller node and add them where actually
needed on the various px30 based boards, which includes rk3326.
This fixes the following DTB validation warnings:
unnecessary #address-cells/#size-cells without "ranges",
"dma-ranges" or child "reg" property
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250709132323.128757-2-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Trying to use UART2 DMA for Bluetooth on ArmSoM Sige1 result in tx
timeout when using dma-names = "tx", "rx" as required by the dt-binding:
Bluetooth: hci0: command 0x0c03 tx timeout
Bluetooth: hci0: BCM: Reset failed (-110)
Change the dmas order to fix UART DMA support on RK3528.
With this fixed Bluetooth can be loaded using DMA on ArmSoM Sige1:
Bluetooth: hci0: BCM: chip id 159
Bluetooth: hci0: BCM: features 0x0f
Bluetooth: hci0: BCM4362A2
Bluetooth: hci0: BCM4362A2 (000.017.017) build 0000
Bluetooth: hci0: BCM4362A2 'brcm/BCM4362A2.hcd' Patch
Bluetooth: hci0: BCM: features 0x0f
Bluetooth: hci0: BCM43752A2 UART 37.4MHz Ampak AP6398 sLNA iLNA CL1 [Version: 1091.1173]
Bluetooth: hci0: BCM4362A2 (000.017.017) build 1173
Fixes: ab6fcb58aedf ("arm64: dts: rockchip: Add UART DMA support for RK3528")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250709210831.3170458-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The NanoPi R5S LTS version has a reset button, which is connected via
GPIO. Note that the non-LTS version does not have the reset button and
therefore on page 19 of the schematic version 2204 it is marked 'NC',
but it is connected on the LTS version.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250711142138.197445-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RTC_HCTOSYS_DEVICE module defaults to rtc0 and should (highly)
preferable be assigned to a battery backed RTC module as it is used to
(re)initialize the system clock.
The R5S and R5C have a connector for a RTC battery which is used by
HYM8563 RTC. Both devices also have another RTC from the rk809 PMIC.
To make sure the HYM8563 is always assigned rtc0, add an alias for it.
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250713161723.270963-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add ov5640 overlay file for imx8qm-mek and imx8qxp-mek board. Camera can
connect different CSI port. So use dts overlay file to handle these
difference connect options.
Signed-off-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Add the clock-frequency property to the cb_intosc_ls_clk and
cb_intosc_hs_div2_clk device tree nodes.
The f2s_free_clk is implemented by custom logic in the FPGA; so it
should be disabled in the dtsi by default and enabled by a
dts for a specific FPGA design on a specific board.
Signed-off-by: Matthew Gerlach <matthew.gerlach@altera.com>
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
This addresses this warning:
socfpga_stratix10_swvp.dtb: ethernet@ff800000 (altr,socfpga-stmmac-a10-s10):
'phy-addr' does not match any of the regexes: '^pinctrl-[0-9]+$'
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The cpu1-start-addr property is only applicable to 32-bit SoCFPGA
platforms.
Removing this property will take care of warnings like this:
socfpga_stratix10_swvp.dtb: sysmgr@ffd12000: cpu1-start-addr:
False schema does not allow 4291846704
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
'altr,modrst-offset' property is not applicable for arm64 SoCFPGA
platforms.
This will fix this dtbs_check warning:
socfpga_stratix10_swvp.dtb:
rstmgr@ffd11000: altr,modrst-offset: False schema does not allow 32
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
Add the default "altr,rst-mgr" to the rstmgr node on Stratix10.
This fixes this warning:
arch/arm64/boot/dts/altera:33:10
rstmgr@ffd11000 (altr,stratix10-rst-mgr): compatible: 'oneOf' conditional
failed, one must be fixed:
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The f2s-free-clk requires a clock-frequency value. We put in an
arbitrary value of 100 MHz for a constant. The true clock frequency
would get generated in an FPGA design and the bootloader will populated
in actual hardware designs.
This fixes warning like this:
arch/arm64/boot/dts/intel:34:8
4 f2s-free-clk (fixed-clock): 'clock-frequency' is a required property
Signed-off-by: Dinh Nguyen <dinguyen@kernel.org>
|
|
The SID controller should be compatible with A64 and others SoC with 0x200
offset.
Signed-off-by: Mikhail Kalashnikov <iuncuim@gmail.com>
Reviewed-by: Chen-Yu Tsai <wens@csie.org>
Link: https://patch.msgid.link/20250703151132.2642378-8-iuncuim@gmail.com
[wens@csie.org: Fixed position of SID device node]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The Liontron H-A133L board features an Ethernet controller with a
JLSemi JL1101 PHY. Its reset pin is tied to the PH12 GPIO.
Note that the reset pin must be handled as a bus-wide reset GPIO in
order to let the MDIO core properly reset it before trying to read
its identification registers. There's no other device on the MDIO bus.
The datasheet of the PHY mentions that the reset signal must be held
for 1 ms to take effect. Make it 2 ms (and the same for post-delay) to
be on the safe side without wasting too much time during boot.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Tested-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250707165155.581579-5-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The Allwinner A100/A133 Ethernet MAC (EMAC) is compatible with the A64
one and needs access to the syscon register for control of the
top-level integration of the unit.
Note that there are two such controllers on the sun50iw10 die, which are
the same unit with a different top-level syscon register offset.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250707165155.581579-4-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The Allwinner A100/A133 supports both RGMII and RMII for its Ethernet
MAC (EMAC) controller. Add corresponding pin definitions.
Note that the sun50iw10 die actually includes two ethernet controllers,
the second of which is rarely exposed to pins. Call the first controller
"emac0" to distinguish it from the second that may be added later.
Signed-off-by: Paul Kocialkowski <paulk@sys-base.io>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>
Link: https://patch.msgid.link/20250707165155.581579-3-paulk@sys-base.io
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
|
|
The P3971-0089+P3834-0008 is an engineering reference platform for the
Tegra264 SoC.
Link: https://lore.kernel.org/r/20250709231401.3767130-3-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Link: https://lore.kernel.org/r/20250709231401.3767130-4-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add basic support for the Tegra264 SoC, sufficient for booting into an
initial ramdisk.
Link: https://lore.kernel.org/r/20250709231401.3767130-2-thierry.reding@gmail.com
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Add the description of the front/user camera (OV8858) on the PinePhone Pro
to the device dts file.
It receives commands over SCCB, an I2C-compatible protocol, at
I2C address 0x36 and transmits data over CSI-MIPI.
I confirmed this address experimentally.
The pin control mapping was again extracted from the PinePhone Pro
schematic v1.0 as well as the RK3399 datasheet revision 1.8.
Table 2-3 in section 2.8 of the RK3399 datasheet contains the mapping
of IO functions for the SoC pins. Page 52 shows GPIO1_A4, page 54 shows
GPIO2_B4.
For the reset (RESET) signal:
page 11 quadrant D2 | p.18 q.B3-4 | p.18 q.C2
RK3399_E.R28 -> GPIO1_A4 -> Camera2_RST -> MIPI_RST1 -> OV8858.12
For the powerdown (PWDN) signal:
page 9 quadrants D4-5 | p.18 q.B2
RK3399_L.F31 -> GPIO2_B4 -> DVP_PDN0_H -> OV8858.14
Helped-by: Dragan Simic <dsimic@manjaro.org>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Link: https://lore.kernel.org/r/20250620-camera-v4-4-0201a8ed5fae@bootlin.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
PinePhone Pro
Add the description of the rear/world camera (IMX258) on the PinePhone Pro
to the device dts file.
It receives commands on the I2C Bus 1 at address 0x1a and transmits data
over CSI-MIPI.
The I2C address for IMX258 can be found in the IMX258-0AQH5 Software
Reference Manual, page 24, section 2.3.1: 0b0011010 = 0x1a.
Section 3 indicates the module has 4 pairs of data lines. While 4-lane
mode is nominal, 2-lane mode should also be supported.
The pin muxing info was extracted from the PinePhone Pro schematic v1.0
as well as the RK3399 datasheet revision 1.8.
Table 2-3 in section 2.8 of the RK3399 datasheet contains the mapping
of IO functions for the SoC pins. Page 52 shows GPIO1_A0, page 54 shows
GPIO2_D4.
For I2C power, the PinePhone Pro schematic page 11 quadrants A4 and A5:
RK3399_J.AA8 and RK3399_J.Y8 get power from vcaa1v8_codec, so turn it on
The IMX258 also uses the following regulators, expected by its driver:
- vana (2.8V analog), called AVDD2V8_DVP on P.18 q.C1 and derived from
VCC1V8_S3 on P.13 q.B2
- vdig (1.2V digital core), called DVDD_DVP on P.18 q.C1 and shown on
P.18 q.D3 to be equivalent to VCC1V2_DVP derived from VCC3V3_SYS on
P.13 q.B3. Note that this regulator's voltage is inconsistently
labeled either 1.2V or 1.5V
RK3399_J.AG1 is GPIO4_A1/I2C1_SDA, RK3399_J.Y6 is GPIO4_A2/I2C1_SCL
This is the default pinctrl "i2c1_xfer" for i2c1 from rk3399-base.
For the reset (RESET) signal:
page 11 quadrant D2 | p.18 q.C3-4 | p.18 q.C2
RK3399_E.R25 -> GPIO1_A0 -> Camera_RST -> MIPI_RST0 -> IMX258.12
For the powerdown (PWDN) signal:
page 11 quadrants B4-5 | p.18 q.C2
RK3399_G.AF8 -> GPIO2_D4 -> DVP_PDN1_H -> IMX258.14
Helped-by: Dragan Simic <dsimic@manjaro.org>
Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Olivier Benjamin <olivier.benjamin@bootlin.com>
Link: https://lore.kernel.org/r/20250620-camera-v4-3-0201a8ed5fae@bootlin.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Following warnings can be observed with CHECK_DTBS=y for the RK3528:
rk3528-pinctrl.dtsi:101.36-105.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym0-led_dpx: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:108.38-112.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym0-led_link: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:115.36-119.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym0-led_spd: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:122.36-126.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym1-led_dpx: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:129.38-133.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym1-led_link: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:136.36-140.5: Warning (node_name_chars_strict):
/pinctrl/fephy/fephym1-led_spd: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:782.32-790.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-rx_bus2: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:793.32-801.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-tx_bus2: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:804.36-810.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-rgmii_clk: Character '_' not recommended in node name
rk3528-pinctrl.dtsi:813.36-823.5: Warning (node_name_chars_strict):
/pinctrl/rgmii/rgmii-rgmii_bus: Character '_' not recommended in node name
Rename the affected nodes to fix these warnings.
Fixes: a31fad19ae39 ("arm64: dts: rockchip: Add pinctrl and gpio nodes for RK3528")
Signed-off-by: Jonas Karlman <jonas@kwiboo.se>
Link: https://lore.kernel.org/r/20250621113859.2146400-1-jonas@kwiboo.se
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Add device tree for FriendlyElec NanoPi M5 with Rockchip RK3576 SoC
(4x Cortex-A72, 4x Cortex-A53, Mali-G52 MC3 GPU, 6 TOPS NPU). Enables
basic booting and connectivity.
Supported features:
- RK3576 SoC
- 4GB LPDDR4X or 8GB/16GB LPDDR5
- 16MB SPI Nor Flash
- 2x 1Gbps Ethernet
- 2x USB 3.2 Gen 1 Type-A ports
- M.2 M-Key PCIe 2.1 x1 NVMe support
- M.2 E-Key SDIO connector
- microSD UHS-I
- HDMI 1.4/2.0 (up to 4096x2304@60Hz)
- 30-pin GPIO (2x SPI, 4x UART, 3x I2C, 5x PWM, 20x GPIO)
- Debug UART
- RTC with HYM8563TS
- Power via USB-C (PD, 6V~20V)
Signed-off-by: John Clark <inindev@gmail.com>
Link: https://lore.kernel.org/r/20250628143229.74460-3-inindev@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The bootloader for RK3588 Tiger currently forces the PMIC reset behavior
(stored in RST_FUN bitfield in register SYS_CFG3 of the PMIC) to 0b1X
which is incorrect for our devices.
It is required to restart the PMU as otherwise the companion
microcontroller cannot detect the PMIC (and by extension the full
product and main SoC) being rebooted which is an issue as that is used
to reset a few things like the PWM beeper and watchdogs.
Let's add the new rockchip,reset-mode property to make sure the PMIC
reset behavior is the expected one.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250627-rk8xx-rst-fun-v4-5-ce05d041b45f@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The bootloader for RK3588 Jaguar currently forces the PMIC reset
behavior (stored in RST_FUN bitfield in register SYS_CFG3 of the PMIC)
to 0b1X which is incorrect for our devices.
It is required to restart the PMU as otherwise the companion
microcontroller cannot detect the PMIC (and by extension the full
product and main SoC) being rebooted which is an issue as that is used
to reset a few things like the PWM beeper and watchdogs.
Let's add the new rockchip,reset-mode property to make sure the PMIC
reset behavior is the expected one.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Link: https://lore.kernel.org/r/20250627-rk8xx-rst-fun-v4-4-ce05d041b45f@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
To make it easier to read the device tree, let's add constants for the
rockchip,reset-mode property values that are currently only applicable
to RK806 PMIC.
Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
[dt-maintainers did not consider this part of the binding, so we're
keeping the header in the devicetree directory]
Link: https://lore.kernel.org/r/20250627-rk8xx-rst-fun-v4-3-ce05d041b45f@cherry.de
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Much like the Sige5, the ROCK 4D also has an HDMI port, so is capable of
providing HDMI audio output as well.
Enable the SoC's hdmi_sound card, and also enable the SoC audio
controller (sai6) that feeds into it.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Tested-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250630-rock4d-audio-v1-4-0b3c8e8fda9c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The production version of the ROCK 4D appears to sport a AICSEMI
AIC8800D80 USB Wi-Fi + BT chipset. This chip does not yet have a
mainline driver.
Add the necessary rfkill node and wifi regulator node to at least make
it show up in lsusb output. The regulator is set as always-on, as like 2
hours deep into debugging why onboard_usb_dev.c wouldn't try enabling
the regulator the device needs to actually show up and thus bind to
onboard_usb_dev.c, I decided that it's not worth the effort.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250630-rock4d-reg-usb-wifi-v1-3-1057f412d98c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The ROCK 4D uses both USB controllers, and both of which in host mode.
However, it still names one of the supplies for them "OTG" in the
schematic.
Fix the "host" supply's input, and add the "otg" supply. Enable the
remaining USB PHY nodes, and the first controller node as well.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250630-rock4d-reg-usb-wifi-v1-2-1057f412d98c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The ROCK 4D's actual DC input is 5V, and the schematic names it as being
5V as well.
Rename the regulator, and change the voltage it claims to be at.
Furthermore, fix vcc_1v1_nldo_s3's vin-supply as coming from
vcc_5v0_sys, and not the DCIN, as per the schematic. This makes no
functional change; both regulators are always on, and one feeds into the
other.
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250630-rock4d-reg-usb-wifi-v1-1-1057f412d98c@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
