| Age | Commit message (Collapse) | Author |
|---|
|
git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into arm/fixes
The newly added Rock 5T board needed slightly bigger fixes to make the
PCIe and USB actually work, because the PCIe does share its lanes between
two ports and the usb needs to toggle a gpio to supply power.
The other interesting fix is the headphone detection on the Orange Pi 5+.
The rest are some added supplies to make the boot log less scary and a
number of styling fixes.
* tag 'v6.17-rockchip-dtsfixes1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
arm64: dts: rockchip: fix second M.2 slot on ROCK 5T
arm64: dts: rockchip: fix USB on RADXA ROCK 5T
arm64: dts: rockchip: Add vcc-supply to SPI flash on Pinephone Pro
arm64: dts: rockchip: fix es8388 address on rk3588s-roc-pc
arm64: dts: rockchip: Fix Bluetooth interrupts flag on Neardi LBA3368
arm64: dts: rockchip: correct network description on Sige5
arm64: dts: rockchip: Minor whitespace cleanup
ARM: dts: rockchip: Minor whitespace cleanup
arm64: dts: rockchip: Add supplies for eMMC on rk3588-orangepi-5
arm64: dts: rockchip: Fix the headphone detection on the orangepi 5 plus
arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3399-pinebook-pro
arm64: dts: rockchip: mark eeprom as read-only for Radxa E52C
Link: https://lore.kernel.org/r/5909239.Y6S9NjorxK@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
The Radxa ROCK 5T has two M.2 slots, much like the Radxa Rock 5B+. As it
stands, the board won't be able to use PCIe3 if the second M.2 slot is
in use.
Fix this by adding the necessary node enablement and data-lanes property
to the ROCK 5T device tree, mirroring what's in the ROCK 5B+ device
tree.
Reported-by: FUKAUMI Naoki <naoki@radxa.com>
Closes: https://libera.catirclogs.org/linux-rockchip/2025-08-25#38610630;
Fixes: 0ea651de9b79 ("arm64: dts: rockchip: add ROCK 5T device tree")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250826-rock5t-second-m2-fix-v1-1-8252124f9cc8@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The RADXA ROCK 5T board uses the same GPIO pin for controlling the USB
host port regulator. This control pin was mistakenly left out of the
ROCK 5T device tree.
Reported-by: FUKAUMI Naoki <naoki@radxa.com>
Closes: https://libera.catirclogs.org/linux-rockchip/2025-08-25#38609886;
Fixes: 0ea651de9b79 ("arm64: dts: rockchip: add ROCK 5T device tree")
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://lore.kernel.org/r/20250825-rock5t-usb-fix-v1-1-de71954a1bb5@collabora.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Axiado AX3000 EVK has total of 4 UART ports. Add missing alias for uart0,
uart1, uart2.
This fixes the probe failures on the remaining UARTs.
Fixes: 1f7055779001 ("arm64: dts: axiado: Add initial support for AX3000 SoC and eval board")
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
As documented in the PinephonePro-Schematic-V1.0-20211127.pdf,
page 11, the SPI Flash's VCC pin is connected to VCC_1V8 power
source. This fixes the following warning:
spi-nor spi1.0: supply vcc not found, using dummy regulator
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Ondřej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20250827143501.1646163-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Use the correct es8388 address for rk3588s-roc-ps
Signed-off-by: Kaison Deng <dkx@t-chip.com.cn>
Link: https://lore.kernel.org/r/20250814043230.2774813-1-dkx@t-chip.com.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
GPIO_ACTIVE_x flags are not correct in the context of interrupt flags.
These are simple defines so they could be used in DTS but they will not
have the same meaning: GPIO_ACTIVE_HIGH = 0 = IRQ_TYPE_NONE.
Correct the interrupt flags, assuming the author of the code wanted same
logical behavior behind the name "ACTIVE_xxx", this is:
ACTIVE_HIGH => IRQ_TYPE_LEVEL_HIGH
Fixes: 7b4a8097e58b ("arm64: dts: rockchip: Add Neardi LBA3368 board")
Cc: stable+noautosel@kernel.org # Needs testing, because actual level is just a guess
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Tested-By: Alex Bee <knaerzche@gmail.com>
Link: https://lore.kernel.org/r/20250818090445.28112-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
Both network PHYs have dedicated crystals for the 25 MHz clock
and do not source it from the RK3576.
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Link: https://lore.kernel.org/r/20250818-sige5-network-phy-clock-v1-1-87a9122d41c2@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The DTS code coding style expects exactly one space around '=' or '{'
characters.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20250819131607.86338-4-krzysztof.kozlowski@linaro.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The eMMC description is missing both vmmc and vqmmc supplies.
Add them to complete the description.
Fixes: 236d225e1ee7 ("arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus")
Fixes: ea63f4666e48 ("arm64: dts: rockchip: refactor common rk3588-orangepi-5.dtsi")
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Link: https://lore.kernel.org/r/20250821052939.1869171-1-wens@kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The logic of the headphone detect pin seems to be inverted, with this
change headphones actually output sound when plugged in.
Verified by checking /sys/kernel/debug/gpio and by listening.
Fixes: 236d225e1ee7 ("arm64: dts: rockchip: Add board device tree for rk3588-orangepi-5-plus")
Signed-off-by: Maud Spierings <maud_spierings@hotmail.com>
Reviewed-by: Ondřej Jirman <megi@xff.cz>
Link: https://lore.kernel.org/r/20250823-orangepi5-v1-1-ae77dd0e06d7@hotmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The assigned clock for JPEG encoder IP has to be IMX95_CLK_VPUBLK_JPEG_ENC
and not IMX95_CLK_VPUBLK_JPEG_DEC (_ENC at the end, not _DEC). This is a
simple copy-paste error, fix it.
Fixes: 153c039a7357 ("arm64: dts: imx95: add jpeg encode and decode nodes")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
1, the phy support up to 8Mbit/s databitrate for CAN FD.
refer to product data sheet:
https://www.nxp.com/docs/en/data-sheet/TJA1463.pdf
2, the standby pin of the phy is ACTIVE_LOW.
3, the phy of flexcan2 connect the standby/en pin to PCAL6408 on i2c4 bus.
Fixes: 02b7adb791e1 ("arm64: dts: imx95-19x19-evk: add adc0 flexcan[1,2] i2c[2,3] uart5 spi3 and tpm3")
Signed-off-by: Haibo Chen <haibo.chen@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
eDM SBC
Add missing microSD slot vqmmc-supply property, otherwise the kernel
might shut down LDO5 regulator and that would power off the microSD
card slot, possibly while it is in use. Add the property to make sure
the kernel is aware of the LDO5 regulator which supplies the microSD
slot and keeps the LDO5 enabled.
Fixes: 562d222f23f0 ("arm64: dts: imx8mp: Add support for Data Modul i.MX8M Plus eDM SBC")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Plus DHCOM
Add missing microSD slot vqmmc-supply property, otherwise the kernel
might shut down LDO5 regulator and that would power off the microSD
card slot, possibly while it is in use. Add the property to make sure
the kernel is aware of the LDO5 regulator which supplies the microSD
slot and keeps the LDO5 enabled.
Fixes: 8d6712695bc8 ("arm64: dts: imx8mp: Add support for DH electronics i.MX8M Plus DHCOM and PDK2")
Signed-off-by: Marek Vasut <marek.vasut@mailbox.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
BUCK4 rail supplies the 3.3V rail. Use the actual regulator
instead of a virtual fixed regulator.
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
Fix SD card removal caused by automatic LDO5 power off after boot:
LDO5: disabling
mmc1: card 59b4 removed
EXT4-fs (mmcblk1p2): shut down requested (2)
Aborting journal on device mmcblk1p2-8.
JBD2: I/O error when updating journal superblock for mmcblk1p2-8.
To prevent this, add vqmmc regulator for USDHC, using a GPIO-controlled
regulator that is supplied by LDO5. Since this is implemented on SoM but
used on baseboards with SD-card interface, implement the functionality
on SoM part and optionally enable it on baseboards if needed.
Fixes: 418d1d840e42 ("arm64: dts: freescale: add initial device tree for TQMa8MPQL with i.MX8MP")
Signed-off-by: Markus Niebel <Markus.Niebel@ew.tq-group.com>
Signed-off-by: Alexander Stein <alexander.stein@ew.tq-group.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
|
|
As described in the pinebookpro_v2.1_mainboard_schematic.pdf page 10,
he SPI Flash's VCC connector is connected to VCC_3V0 power source.
This fixes the following warning:
spi-nor spi1.0: supply vcc not found, using dummy regulator
Fixes: 5a65505a69884 ("arm64: dts: rockchip: Add initial support for Pinebook Pro")
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Dragan Simic <dsimic@manjaro.org>
Link: https://lore.kernel.org/r/20250730102129.224468-1-pbrobinson@gmail.com
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
The eeprom on the Radxa E52C SBC contains manufacturer data
such as the mac address, so it should be marked as read-only.
Fixes: 9be4171219b6 ("arm64: dts: rockchip: Add Radxa E52C")
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Link: https://lore.kernel.org/r/20250810100020.445053-2-amadeus@jmu.edu.cn
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are a few patches to fix up bits that went missing during the
merge window: The tegra and s3c patches address trivial regressions
from conflicts, the bcm7445 makes the dt conform to the binding that
was made stricter"
* tag 'soc-fixes-6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: tegra: Remove numa-node-id properties
ARM: s3c/gpio: complete the conversion to new GPIO value setters
ARM: dts: broadcom: Fix bcm7445 memory controller compatible
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into arm/fixes
arm64: tegra: Device tree changes for v6.17-rc1
This contains an extra patch that drops numa-node-id properties that
were added to the Tegra264 DT files by mistake.
* tag 'tegra-for-6.17-arm64-dt-v3' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Remove numa-node-id properties
arm64: tegra: Add p3971-0089+p3834-0008 support
arm64: tegra: Add memory controller on Tegra264
arm64: tegra: Add Tegra264 support
dt-bindings: memory: tegra: Add Tegra264 support
Link: https://lore.kernel.org/r/20250731162920.3329820-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
|
|
These were initially added because some software was checking for their
presence. However, the device is not NUMA, so adding these is wrong and
hence they should be removed.
Signed-off-by: Thierry Reding <treding@nvidia.com>
|
|
Pull drm updates from Dave Airlie:
"Highlights:
- Intel xe enable Panthor Lake, started adding WildCat Lake
- amdgpu has a bunch of reset improvments along with the usual IP
updates
- msm got VM_BIND support which is important for vulkan sparse memory
- more drm_panic users
- gpusvm common code to handle a bunch of core SVM work outside
drivers.
Detail summary:
Changes outside drm subdirectory:
- 'shrink_shmem_memory()' for better shmem/hibernate interaction
- Rust support infrastructure:
- make ETIMEDOUT available
- add size constants up to SZ_2G
- add DMA coherent allocation bindings
- mtd driver for Intel GPU non-volatile storage
- i2c designware quirk for Intel xe
core:
- atomic helpers: tune enable/disable sequences
- add task info to wedge API
- refactor EDID quirks
- connector: move HDR sink to drm_display_info
- fourcc: half-float and 32-bit float formats
- mode_config: pass format info to simplify
dma-buf:
- heaps: Give CMA heap a stable name
ci:
- add device tree validation and kunit
displayport:
- change AUX DPCD access probe address
- add quirk for DPCD probe
- add panel replay definitions
- backlight control helpers
fbdev:
- make CONFIG_FIRMWARE_EDID available on all arches
fence:
- fix UAF issues
format-helper:
- improve tests
gpusvm:
- introduce devmem only flag for allocation
- add timeslicing support to GPU SVM
ttm:
- improve eviction
sched:
- tracing improvements
- kunit improvements
- memory leak fixes
- reset handling improvements
color mgmt:
- add hardware gamma LUT handling helpers
bridge:
- add destroy hook
- switch to reference counted drm_bridge allocations
- tc358767: convert to devm_drm_bridge_alloc
- improve CEC handling
panel:
- switch to reference counter drm_panel allocations
- fwnode panel lookup
- Huiling hl055fhv028c support
- Raspberry Pi 7" 720x1280 support
- edp: KDC KD116N3730A05, N160JCE-ELL CMN, N116BCJ-EAK
- simple: AUO P238HAN01
- st7701: Winstar wf40eswaa6mnn0
- visionox: rm69299-shift
- Renesas R61307, Renesas R69328 support
- DJN HX83112B
hdmi:
- add CEC handling
- YUV420 output support
xe:
- WildCat Lake support
- Enable PanthorLake by default
- mark BMG as SRIOV capable
- update firmware recommendations
- Expose media OA units
- aux-bux support for non-volatile memory
- MTD intel-dg driver for non-volatile memory
- Expose fan control and voltage regulator in sysfs
- restructure migration for multi-device
- Restore GuC submit UAF fix
- make GEM shrinker drm managed
- SRIOV VF Post-migration recovery of GGTT nodes
- W/A additions/reworks
- Prefetch support for svm ranges
- Don't allocate managed BO for each policy change
- HWMON fixes for BMG
- Create LRC BO without VM
- PCI ID updates
- make SLPC debugfs files optional
- rework eviction rejection of bound external BOs
- consolidate PAT programming logic for pre/post Xe2
- init changes for flicker-free boot
- Enable GuC Dynamic Inhibit Context switch
i915:
- drm_panic support for i915/xe
- initial flip queue off by default for LNL/PNL
- Wildcat Lake Display support
- Support for DSC fractional link bpp
- Support for simultaneous Panel Replay and Adaptive sync
- Support for PTL+ double buffer LUT
- initial PIPEDMC event handling
- drm_panel_follower support
- DPLL interface renames
- allocate struct intel_display dynamically
- flip queue preperation
- abstract DRAM detection better
- avoid GuC scheduling stalls
- remove DG1 force probe requirement
- fix MEI interrupt handler on RT kernels
- use backlight control helpers for eDP
- more shared display code refactoring
amdgpu:
- add userq slot to INFO ioctl
- SR-IOV hibernation support
- Suspend improvements
- Backlight improvements
- Use scaling for non-native eDP modes
- cleaner shader updates for GC 9.x
- Remove fence slab
- SDMA fw checks for userq support
- RAS updates
- DMCUB updates
- DP tunneling fixes
- Display idle D3 support
- Per queue reset improvements
- initial smartmux support
amdkfd:
- enable KFD on loongarch
- mtype fix for ext coherent system memory
radeon:
- CS validation additional GL extensions
- drop console lock during suspend/resume
- bump driver version
msm:
- VM BIND support
- CI: infrastructure updates
- UBWC single source of truth
- decouple GPU and KMS support
- DP: rework I/O accessors
- DPU: SM8750 support
- DSI: SM8750 support
- GPU: X1-45 support and speedbin support for X1-85
- MDSS: SM8750 support
nova:
- register! macro improvements
- DMA object abstraction
- VBIOS parser + fwsec lookup
- sysmem flush page support
- falcon: generic falcon boot code and HAL
- FWSEC-FRTS: fb setup and load/execute
ivpu:
- Add Wildcat Lake support
- Add turbo flag
ast:
- improve hardware generations implementation
imx:
- IMX8qxq Display Controller support
lima:
- Rockchip RK3528 GPU support
nouveau:
- fence handling cleanup
panfrost:
- MT8370 support
- bo labeling
- 64-bit register access
qaic:
- add RAS support
rockchip:
- convert inno_hdmi to a bridge
rz-du:
- add RZ/V2H(P) support
- MIPI-DSI DCS support
sitronix:
- ST7567 support
sun4i:
- add H616 support
tidss:
- add TI AM62L support
- AM65x OLDI bridge support
bochs:
- drm panic support
vkms:
- YUV and R* format support
- use faux device
vmwgfx:
- fence improvements
hyperv:
- move out of simple
- add drm_panic support"
* tag 'drm-next-2025-07-30' of https://gitlab.freedesktop.org/drm/kernel: (1479 commits)
drm/tidss: oldi: convert to devm_drm_bridge_alloc() API
drm/tidss: encoder: convert to devm_drm_bridge_alloc()
drm/amdgpu: move reset support type checks into the caller
drm/amdgpu/sdma7: re-emit unprocessed state on ring reset
drm/amdgpu/sdma6: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5.2: re-emit unprocessed state on ring reset
drm/amdgpu/sdma5: re-emit unprocessed state on ring reset
drm/amdgpu/gfx12: re-emit unprocessed state on ring reset
drm/amdgpu/gfx11: re-emit unprocessed state on ring reset
drm/amdgpu/gfx10: re-emit unprocessed state on ring reset
drm/amdgpu/gfx9.4.3: re-emit unprocessed state on kcq reset
drm/amdgpu/gfx9: re-emit unprocessed state on kcq reset
drm/amdgpu: Add WARN_ON to the resource clear function
drm/amd/pm: Use cached metrics data on SMUv13.0.6
drm/amd/pm: Use cached data for min/max clocks
gpu: nova-core: fix bounds check in PmuLookupTableEntry::new
drm/amdgpu: Replace HQD terminology with slots naming
drm/amdgpu: Add user queue instance count in HW IP info
drm/amd/amdgpu: Add helper functions for isp buffers
drm/amd/amdgpu: Initialize swnode for ISP MFD device
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull new SoC support from Arnd Bergmann:
"These five newly supported chips come with both devicetree
descriptions and the changes to wire them up to the build system for
easier bisection.
The chips in question are:
- Marvell PXA1908 was the first 64-bit mobile phone chip from Marvell
in the product line that started with the Digital StrongARM SA1100
based PDAs and continued with the Intel PXA2xx that dominated early
smartphones. This one only made it only into a few products before
the entire product line was cut in 2015.
- The QiLai SoC is made by RISC-V core designer Andes Technologies
and is in the 'Voyager' reference board in MicroATX form factor. It
uses four in-order AX45MP cores, which is the midrange product from
Andes.
- CIX P1 is one of the few Arm chips designed for small workstations,
and this one uses 12 Cortex-A720/A520 cores, making it also one of
the only ARMv9.2 machines that one can but at the moment.
- Axiado AX3000 is an embedded chip with relative small Cortex-A53
CPU cores described as a "Trusted Control/Compute Unit" that can be
used as a BMC in servers. In addition to the usual I/O, this one
comes with 10GBit ethernet and and a 4TOPS NPU.
- Sophgo SG2000 is an embedded chip that comes with both RISC-V and
Arm cores that can run Linux. This was already supported for RISC-V
but now it also works on Arm
One more chip, the Black Sesame C1200 did not make it in tirm for the
merge window"
* tag 'soc-newsoc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (38 commits)
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
...
|
|
Pull SoC devicetree updates from Arnd Bergmann:
"There are a few new variants of existing chips:
- mt6572 is an older mobile phone chip from mediatek that was
extremely popular a decade ago but never got upstreamed until now
- exynos2200 is a recent high-end mobile phone chip used in a few
Samsung phones like the Galaxy S22
- Renesas R-Car V4M-7 (R8A779H2) is an updated version of R-Car V4M
(R8A779H0) and used in automotive applications
- Tegra264 is a new chip from NVIDIA, but support is fairly minimal
for now, and not much information is public about it
There are five more chips in a separate branch, as those are new chip
families that I merged along with the necessary infrastructure.
New board support is not that exciting, with a total of 33 newly added
machines here:
- Evaluation platforms for the chips above, plus TI am62d2 and Sophgo
sg2042
- Six 32-bit industrial boards based on stm32, imx6 and am33 chips,
plus eight 64-bit rockchips rk33xx/rk35xx, am62d2, t527, imx8 and
imx95
- Two newly added ASPEED BMC based motherboards, and one that got
removed
- Phones and Tablets based on 32-bit mt6572, tegra30 and 64-bit
msm8976 SoCs
- Three Laptops based on Mediatek mt8186 and Qualcomm Snapdragon X1
- A set-top box based on Amlogic meson-gxm
Updates for existing machines are spread over all the above families.
One notable change here is support for the RP1 I/O chip used in
Raspberry Pi 5"
* tag 'soc-dt-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (606 commits)
riscv: dts: sophgo: fix mdio node name for CV180X
riscv: dts: sophgo: sophgo-srd3-10: reserve uart0 device
riscv: dts: sophgo: add Sophgo SG2042_EVB_V2.0 board device tree
riscv: dts: sophgo: add Sophgo SG2042_EVB_V1.X board device tree
dt-bindings: riscv: add Sophgo SG2042_EVB_V1.X/V2.0 bindings
riscv: dts: sophgo: add ethernet GMAC device for sg2042
riscv: dts: sophgo: Enable ethernet device for Huashan Pi
riscv: dts: sophgo: Add mdio multiplexer device for cv18xx
riscv: dts: sophgo: Add ethernet device for cv18xx
riscv: dts: sophgo: sg2044: add pmu configuration
riscv: dts: sophgo: sg2044: add ziccrse extension
riscv: dts: sophgo: add zfh for sg2042
riscv: dts: sophgo: add ziccrse for sg2042
riscv: dts: sophgo: Add xtheadvector to the sg2042 devicetree
riscv: dts: sophgo: sg2044: add PCIe device support for SG2044
riscv: dts: sophgo: sg2044: add MSI device support for SG2044
riscv: dts: sophgo: add reset configuration for Sophgo CV1800 series SoC
riscv: dts: sophgo: add reset generator for Sophgo CV1800 series SoC
dt-bindings: soc: sophgo: Move SoCs/boards from riscv into soc, add SG2000
riscv: dts: sophgo: sg2044: Add missing riscv,cbop-block-size property
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver changes for
6.17-rc1.
Lots of little things in here, mostly all small cleanups and updates,
no major new features this development cycle. Stuff included in here
is:
- xhci minor tweaks for error handling
- typec minor updates and a driver update
- gadget driver api cleanups
- unused function removals
- unbind memory leak fixes
- a few new device ids added
- a few new devices supported for some drivers
- other minor cleanups and changes
All of these have been in linux-next with no reported issues, with the
leak fixes being in the shortest amount of time, but they are
'obviously correct' :)"
* tag 'usb-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (100 commits)
usb: musb: omap2430: clean up probe error handling
usb: musb: omap2430: fix device leak at unbind
usb: gadget: udc: renesas_usb3: fix device leak at unbind
usb: dwc3: meson-g12a: fix device leaks at unbind
usb: dwc3: imx8mp: fix device leak at unbind
usb: musb: omap2430: enable compile testing
usb: gadget: udc: renesas_usb3: drop unused module alias
usb: xhci: print xhci->xhc_state when queue_command failed
usb: atm: cxacru: Merge cxacru_upload_firmware() into cxacru_heavy_init()
USB: serial: option: add Foxconn T99W709
usb: core: add urb->sgt parameter description
thunderbolt: Fix copy+paste error in match_service_id()
usb: typec: ucsi: Update power_supply on power role change
usb: typec: ucsi: psy: Set current max to 100mA for BC 1.2 and Default
usb: typec: fusb302: cache PD RX state
usb: typec: ucsi: yoga-c630: add DRM dependency
usb: gadget : fix use-after-free in composite_dev_cleanup()
usb: chipidea: imx: Add a missing blank line
usb: gadget: f_uac1: replace scnprintf() with sysfs_emit()
usb: usblp: clean up assignment inside if conditions
...
|
|
git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC fixes from Arnd Bergmann:
"These are two fixes that came in late, one addresses a regression on a
rockchips based board, the other is for ensuring a consistent dt
binding for a device added in 6.16 before the incorrect one makes it
into a release"
* tag 'soc-fixes-6.16-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: rockchip: Drop netdev led-triggers on NanoPi R5S
arm64: dts: allwinner: a523: Rename emac0 to gmac0
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner fixes for 6.16
Only one fix:
Correct the name of the A523's EMAC0 to GMAC0, as seen in the SoC's
datasheets. The matching DT binding change is in the net tree.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add a UFS host controller interface (UFSHCI) node to mt8195.dtsi.
Introduce the 'mediatek,ufs-disable-mcq' property to allow disabling
Multiple Circular Queue (MCQ) support.
Signed-off-by: Rice Lee <ot_riceyj.lee@mediatek.com>
Signed-off-by: Eric Lin <ht.lin@mediatek.com>
Signed-off-by: Macpaul Lin <macpaul.lin@mediatek.com>
Link: https://lore.kernel.org/r/20250722085721.2062657-4-macpaul.lin@mediatek.com
Reviewed-by: Peter Wang <peter.wang@mediatek.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
|
|
soc/newsoc
ARM Devicetrees for v6.17
Sophgo:
Add support for Duo Module 01 Evaluation Board.
This board uses SG2000(old codename CV181xH),
which is dual-arch, RISC-V and ARM64. This
patch add the support for ARM64.
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
* tag 'arm-sophgo-dt-for-v6.17' of https://github.com/sophgo/linux:
arm64: defconfig: Enable rudimentary Sophgo SG2000 support
arm64: Add SOPHGO SOC family Kconfig support
arm64: dts: sophgo: Add Duo Module 01 Evaluation Board
arm64: dts: sophgo: Add Duo Module 01
arm64: dts: sophgo: Add initial SG2000 SoC device tree
Link: https://lore.kernel.org/r/MAUPR01MB11072C4B088AAC02268044E95FE5FA@MAUPR01MB11072.INDPRD01.PROD.OUTLOOK.COM
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Duo Module 01 Evaluation Board contains Sophgo Duo Module 01
SMD SoM, Ethernet+USB switch, microSD slot, etc...
Add only support for UART0 (console) and microSD slot.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-5-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
The Duo Module 01 is a compact module with integrated SG2000,
WI-FI6/BTDM5.4, and eMMC.
Add only support for UART and SDHCI.
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-4-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
Add initial device tree for the SG2000 SoC by SOPHGO (from ARM64 PoV).
Reviewed-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Link: https://lore.kernel.org/r/20250612132844.767216-3-alexander.sverdlin@gmail.com
Signed-off-by: Inochi Amaoto <inochiama@gmail.com>
Signed-off-by: Chen Wang <unicorn_wang@outlook.com>
Signed-off-by: Chen Wang <wangchen20@iscas.ac.cn>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux into soc/dt
Apple SoC device tree changes for v6.17
- Added the bindings and nodes for Apple SoC GPU. The driver itself
isn't ready for upstreaming yet due to rust dependencies but we're
confident that the bindings are stable at this point.
- Added a missing node for the touchbar framebuffer to Apple T2 device
trees, which is the BMC for some x86 Macs
- Fixed a W=1 warning by adding bit offsets to NVMEM node names. This
required a change to the generic NVMEM cell binding which will be part
of 6.17 through the NVMEM tree.
Signed-off-by: Sven Peter <sven@kernel.org>
* tag 'apple-soc-dt-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sven/linux:
arm64: dts: apple: Add Apple SoC GPU
dt-bindings: gpu: Add Apple SoC GPU
arm64: dts: apple: t8012-j132: Include touchbar framebuffer node
arm64: dts: apple: Add bit offset to PMIC NVMEM node names
Link: https://lore.kernel.org/r/20250722163258.62424-2-sven@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip into soc/dt
New board: FriendlyElec NanoPi M5
Camera support for the PinePhone Pro.
A bunch of cleanups to make DTC happier, fix ordering of DMA uart
channels on rk3528 and some video output enablement as well as some
button definitions.
An interesting tidbit is the reset behaviour addition in that some
boards have specific requirements as to how the PMIC needs to do the
restart. DT-maintainers did not consider the header with helper-constants
as part of the binding, so that header ended up in the Rockchip directory
* tag 'v6.17-rockchip-dts64-2' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (29 commits)
arm64: dts: rockchip: Add maskrom button to NanoPi R5S + R5C
arm64: dts: rockchip: Drop regulator-compatible property on rk3399
arm64: dts: rockchip: Drop unneeded address+size-cells on px30
arm64: dts: rockchip: Fix LCD panel port on rk3566-pinetab2
arm64: dts: rockchip: Move mipi_out node on rk3399 haikou demo dtso
arm64: dts: rockchip: Simplify mipi_out endpoint on rk3399 RP64 dtso
arm64: dts: rockchip: Simplify edp endpoints on several rk3399 boards
arm64: dts: rockchip: Simplify VOP port definition on rk3328
arm64: dts: rockchip: Move dsi address+size-cells from SoC to rk3399 boards
arm64: dts: rockchip: Move dsi address+size-cells from SoC to px30 boards
arm64: dts: rockchip: Fix UART DMA support for RK3528
arm64: dts: rockchip: Add reset button to NanoPi R5S
arm64: dts: rockchip: Add rtc0 alias for NanoPi R5S + R5C
arm64: dts: rockchip: describe the OV8858 user camera on PinePhone Pro
arm64: dts: rockchip: describe I2c Bus 1 and IMX258 world camera on PinePhone Pro
arm64: dts: rockchip: Fix pinctrl node names for RK3528
arm64: dts: rockchip: Add FriendlyElec NanoPi M5 support
dt-bindings: arm: rockchip: add FriendlyElec NanoPi M5 board
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Tiger
arm64: dts: rockchip: force PMIC reset behavior to restart PMU on RK3588 Jaguar
...
Link: https://lore.kernel.org/r/11552292.NyiUUSuA9g@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Sometimes the netdev triggers causes tasks to get blocked for more then
120 seconds, which in turn makes the (WAN) network port on the NanoPi
R5S fail to come up.
This results in the following (partial) trace:
INFO: task kworker/0:1:11 blocked for more than 120 seconds.
Not tainted 6.16-rc6+unreleased-arm64-cknow #1 Debian 6.16~rc6-1~exp1
"echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
task:kworker/0:1 state:D stack:0 pid:11 tgid:11 ppid:2 task_flags:0x4208060 flags:0x00000010
Workqueue: events_power_efficient reg_check_chans_work [cfg80211]
Call trace:
__switch_to+0xf8/0x168 (T)
__schedule+0x3f8/0xda8
schedule+0x3c/0x120
schedule_preempt_disabled+0x2c/0x58
__mutex_lock.constprop.0+0x4d0/0xab8
__mutex_lock_slowpath+0x1c/0x30
mutex_lock+0x50/0x68
rtnl_lock+0x20/0x38
reg_check_chans_work+0x40/0x478 [cfg80211]
process_one_work+0x178/0x3e0
worker_thread+0x260/0x390
kthread+0x150/0x250
ret_from_fork+0x10/0x20
INFO: task kworker/0:1:11 is blocked on a mutex likely owned by task dhcpcd:615.
task:dhcpcd state:D stack:0 pid:615 tgid:615 ppid:614 task_flags:0x400140 flags:0x00000018
Call trace:
__switch_to+0xf8/0x168 (T)
__schedule+0x3f8/0xda8
schedule+0x3c/0x120
schedule_preempt_disabled+0x2c/0x58
rwsem_down_write_slowpath+0x1e4/0x750
down_write+0x98/0xb0
led_trigger_register+0x134/0x1c0
phy_led_triggers_register+0xf4/0x258 [libphy]
phy_attach_direct+0x30c/0x390 [libphy]
phylink_fwnode_phy_connect+0xb0/0x138 [phylink]
__stmmac_open+0xec/0x520 [stmmac]
stmmac_open+0x4c/0xe8 [stmmac]
__dev_open+0x130/0x2e0
__dev_change_flags+0x1c4/0x248
netif_change_flags+0x2c/0x80
dev_change_flags+0x88/0xc8
devinet_ioctl+0x35c/0x610
inet_ioctl+0x204/0x260
sock_do_ioctl+0x6c/0x140
sock_ioctl+0x2e4/0x388
__arm64_sys_ioctl+0xb4/0x120
invoke_syscall+0x6c/0x100
el0_svc_common.constprop.0+0x48/0xf0
do_el0_svc+0x24/0x38
el0_svc+0x3c/0x188
el0t_64_sync_handler+0x10c/0x140
el0t_64_sync+0x198/0x1a0
In order to not introduce a regression with kernel 6.16, drop the netdev
triggers for now while the problem is being investigated further.
Fixes: 1631cbdb8089 ("arm64: dts: rockchip: Improve LED config for NanoPi R5S")
Helped-by: Robin Murphy <robin.murphy@arm.com>
Signed-off-by: Diederik de Haas <didi.debian@cknow.org>
Link: https://lore.kernel.org/r/20250722123628.25660-1-didi.debian@cknow.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Support for the AX3000 SoC, from Harshit Shah <hshah@axiado.com>:
The AX3000 is a multi-core system-on-chip featuring four ARM Cortex-A53
cores, secure vault, hardware firewall, and AI acceleration engines. This
initial support enables basic bring-up of the SoC and evaluation platform
with CPU, timer, UART, and I3C functionality.
The series begins by adding the "axiado" vendor prefix and compatible
strings for the SoC and board. It then introduces the device tree files
and minimal ARCH_AXIADO platform support in arm64.
* newsoc/axiado:
MAINTAINERS: Add entry for Axiado
arm64: defconfig: enable the Axiado family
arm64: dts: axiado: Add initial support for AX3000 SoC and eval board
arm64: add Axiado SoC family
dt-bindings: i3c: cdns: add Axiado AX3000 I3C controller
dt-bindings: serial: cdns: add Axiado AX3000 UART controller
dt-bindings: gpio: cdns: add Axiado AX3000 GPIO variant
dt-bindings: gpio: cdns: convert to YAML
dt-bindings: arm: axiado: add AX3000 EVK compatible strings
dt-bindings: vendor-prefixes: Add Axiado Corporation
|
|
Add initial device tree support for the AX3000 SoC and its evaluation
platform. The AX3000 is a multi-core SoC featuring 4 Cortex-A53 cores,
Secure Vault, AI Engine and Firewall.
It adds support for Cortex-A53 CPUs, timer, UARTs, and I3C
controllers on the AX3000 evaluation board.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Harshit Shah <hshah@axiado.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux into soc/dt
Amlogic ARM64 DT for v6.17:
- Align wifi node name with bindings
- Add pinctrl nodes for Amlogic S7/S7D/S6 nodes
- Enable the NPU nodes on Alta & VIM3
- New boards:
- Ugoos AM3
* tag 'amlogic-arm64-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/amlogic/linux:
arm64: dts: amlogic: Enable the npu node for Alta and VIM3
dts: arm64: amlogic: add S6 pinctrl node
dts: arm64: amlogic: add S7D pinctrl node
dts: arm64: amlogic: add S7 pinctrl node
arm64: dts: amlogic: Add Ugoos AM3
dt-bindings: arm: amlogic: Add Ugoos AM3
arm64: dts: amlogic: Align wifi node name with bindings
Link: https://lore.kernel.org/r/3d93b621-9544-4a68-85db-6f87a9e8fa5c@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into soc/dt
Qualcomm Arm64 DeviceTree updates for v6.17
79b896e7da7e arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
6516961352a1 arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
The DB410c D3 camera mezzanine is converted to an overlay.
On MSM8976 SDC2 pinctrl definitions are introduced and BLSP DMA
controller is marked to be managed by another entity.
Add camera subsystem on the QCM2290 platform.
Add and enable remoteproc and related devices on QCS615.
Add and enable Video encoder/decoder on QCS8300 and SA8775P.
Also on SA8775P add CPU OPP tables for scaling DDR/L3 bandwidth based on
CPU frequency, add L3 interconnect definitions, DSI and video
encoder/decoder support.
Enable the SLPI remoteproc on SDM850-based Lenovo Yoga C630.
On SM6350, add the video clock controller, APR and some audio related
services.
Describe the camera subsystem on SM8550 and add Iris video
encoder/decoder node for SM8650.
On SM8750 introduce UFS and Soundwire support, enable these and describe
the sound hardware on MTP and QRD.
Add camera clock controller on SC8180X.
On X Elite, for the Dell XPS13, add WiFi and Bluetooth pwrseq and enable
the fingerprint sensor. For HP Omnibook X14 USB1 SS1 SBU mux and do
some misc cleanup.
Replace the thermal zones inherited from X Elite with X Plus-specific
ones.
Add missing interrupts and clean up unrelated clocks for PCIe
controllers across a variety of platforms.
* tag 'qcom-arm64-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (67 commits)
arm64: dts: qcom: sm8150: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: sc8180x: Drop unrelated clocks from PCIe hosts
arm64: dts: qcom: x1-asus-zenbook: support sound
arm64: dts: qcom: x1-asus-zenbook: fixup GPU nodes
arm64: dts: qcom: sm6115: add debug UART pins
arm64: dts: qcom: sm8650: add iris DT node
arm64: dts: qcom: msm8976-longcheer-l9360: Add initial device tree
arm64: dts: qcom: msm8976: Add sdc2 GPIOs
dt-bindings: arm: qcom: Add MSM8976 BQ Aquaris X5 Plus
arm64: dts: qcom: msm8976: Make blsp_dma controlled-remotely
arm64: dts: qcom: sa8775p: Correct the interrupt for remoteproc
arm64: dts: qcom: sm8550: Add support for camss
arm64: dts: qcom: qcs615: disable the CTI device of the camera block
arm64: dts: qcom: qcs615-ride: enable remoteprocs
arm64: dts: qcom: qcs615: add ADSP and CDSP nodes
arm64: dts: qcom: qcs615: Add IMEM and PIL info region
arm64: dts: qcom: qcs615: Add mproc node for SEMP2P
arm64: dts: qcom: Add support for X1-based Asus Zenbook A14
arm64: dts: qcom: sc7180: Expand IMEM region
arm64: dts: qcom: sdm845: Expand IMEM region
...
Link: https://lore.kernel.org/r/20250716031059.76348-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into soc/dt
Allwinner device tree changes for 6.17
This branch includes a change shared with the clk tree for adding
the missing PPU0 reset on the A523.
The PM domain DT binding immutable branch is also included, which
brings in v6.16-rc2, as well as PM domain bindings for other platforms.
Other changes include:
- RGB666 LCD pin definitions for the V3s PE pins and V3 PD pins
- node order fixes for the A523 dtsi
- UART1 pin definitions for A523
- Allwinner board DT binding cleanup
- EMAC support on A100/A133
- Enabled on the Liontron H-A133L board
- SID efuse, power controllers and GPU added for A523
- A523 GPU enabled on all existing boards
New boards:
- Xunlong OrangePi 4A with the Allwinner T527 SoC.
* tag 'sunxi-dt-for-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux: (21 commits)
arm64: dts: allwinner: a523: enable Mali GPU for all boards
arm64: dts: allwinner: a523: add Mali GPU node
arm64: dts: allwinner: a523: Add power controller device nodes
dt-bindings: power: Add A523 PPU and PCK600 power controllers
arm64: dts: allwinner: A523: Add SID controller node
arm64: dts: allwinner: a133-liontron-h-a133l: Add Ethernet support
arm64: dts: allwinner: a100: Add EMAC support
arm64: dts: allwinner: a100: Add pin definitions for RGMII/RMII
dt-bindings: arm: sunxi: Combine board variants into enums
dt-bindings: power: qcom,rpmpd: document the Milos RPMh Power Domains
arm64: dts: allwinner: t527: Add OrangePi 4A board
arm64: dts: allwinner: a523: Add UART1 pins
arm64: dts: allwinner: a523: Move rgmii0 pins to correct location
arm64: dts: allwinner: a523: Move mmc nodes to correct position
dt-bindings: arm: sunxi: Add Xunlong OrangePi 4A board
ARM: dts: sun8i: v3: Add RGB666 LCD PD pins definition
ARM: dts: sun8i: v3s: Add RGB666 LCD PE pins definition
dt-bindings: reset: sun55i-a523-r-ccu: Add missing PPU0 reset
dt-bindings: firmware: thead,th1520: Add resets for GPU clkgen
dt-bindings: rockchip: pmu: Add compatible for RK3528
...
Link: https://lore.kernel.org/r/aHaQFe3Lr8Qzyb1M@wens.tw
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux into soc/dt
TI K3 device tree updates for v6.17
Generic fixes and cleanups:
* Enable overlays for all DTB files
* Enable Schmitt Trigger by default in K3 pinctrl
SoC specific changes:
AM62D
* Add new SoC support and pinctrl entries
AM62
* Remove eMMC High Speed DDR support
* Move eMMC pinmux to top level board file
J784S4/J742S2
* Add Power on BIST (PBSIT) nodes
* Add ACSPCIE1 node
J721S2
* Add McASP support
J722S
* Add alernate audio-refclk0 node
Board changes:
Multiple boards
* Bootphase tags for Ethernet boot support
AM62D2-EVM
* Add new board support
AM62A7-SK
* Fix pinmux for main_uart1
* Add SPI NAND support
AM62P
* Fix PWM_3_DSI GPIO direction, SD pull up, I2C ups on AM62P-Verdin
* Add bootph-all property for Ethernet boot
AM62-Verdin
* Enable pull-ups on I2C buses
AM654-base-board
* Add boot phase tags for various bootmodes
AM64
* Add boot phase tag PCIe EP boot
* Fix PRU-ICSSG Ethernet ports on AM642-PhyBoard-Electra
AM69-SK
* Add idle-states for remaining SERDES instances
J722S-EVM
* Fix USB gpio-hog level for Type-C
* tag 'ti-k3-dt-for-v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/ti/linux: (33 commits)
arm64: dts: ti: k3-am69-sk: Add idle-states for remaining SERDES instances
arm64: dts: ti: k3-am62a7-sk: add boot phase tags
arm64: dts: ti: k3-am654-base-board: add boot phase tags
arm64: dts: ti: k3-am65: add boot phase tags
arm64: dts: ti: k3-am69-sk: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-j722s-evm: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-am62p5-sk: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: k3-am68-sk-base-board: Add bootph-all property to enable Ethernet boot
arm64: dts: ti: Add support for AM62D2-EVM
arm64: dts: ti: Add pinctrl entries for AM62D2 family of SoCs
dt-bindings: arm: ti: Add AM62D2 SoC and Boards
arm64: dts: ti: Add bootph property to nodes at source for am62a
arm64: dts: ti: k3-am62p-verdin: Adjust temperature trip points
arm64: dts: ti: k3-am62p-j722s: Enable freq throttling on thermal alert
arm64: dts: ti: k3-j784s4-j742s2-main-common: Add PBIST_14 node
dt-bindings: soc: ti: bist: Add BIST for K3 devices
arm64: dts: ti: k3-am62-main: Remove eMMC High Speed DDR support
arm64: dts: ti: k3-am62*: Move eMMC pinmux to top level board file
arm64: dts: ti: k3-am62a7-sk: fix pinmux for main_uart1
arm64: dts: ti: Enable overlays for all DTB files
...
Link: https://lore.kernel.org/r/a0401460-8c67-4c29-a6cf-fa4bdf33bc7d@ti.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into soc/dt
i.MX arm64 device tree changes for 6.17:
- New board support: GOcontroll Moduline based devices, phyCORE-i.MX 95
Plus FPSC SoM and base boards, i.MX93 phycore overlays
- A few i.MX8M changes from Adam Ford to add DMA configuration for
UART2, set up VPU clocks for nominal and overdrive mode, improve
HS400 USDHC clock speed
- Several sets of changes from Alexander Stein to add EASRC support for
tqma8mnql and tqma8mpql board, add missing DMA entries for I2C & LPUART
on ls1043a and ls1046a, enable SFP interface for tqmls1043a and
tqmls1046a, etc.
- A series from Clark Wang to improve Ethernet support for i.MX93,
removing eee-broken-1000t for eqos node, reducing the driving strength
of net RXC/TXC, etc.
- A few i.MX95 and i.MX8Q changes from Frank Li to add missing devices
for EVK board and enable camera support
- A couple of changes from Laurentiu Mihalcea to support WM8962 audio
codec for imx8qxp-mek and imx8qm-mek board
- A number of changes from Shengjiu Wang to improve various audio
support for imx943-evk and imx8mp-evk
- A series from Tim Harvey to increase HS400 USDHC clock speed for
Gateworks i.MX8M Venice devices
- Many other random improvements and cleanups on various boards
* tag 'imx-dt64-6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (85 commits)
arm64: dts: imx8q: add camera ov5640 support for imx8qm-mek and imx8qxp-mek
arm64: dts: freescale: imx8mp-toradex-smarc: remove gpio hog
arm64: dts: freescale: imx8mp-toradex-smarc: fix lvds dsi mux gpio
arm64: dts: imx8mm-venice-gw7904: Increase HS400 USDHC clock speed
arm64: dts: imx8mm-venice-gw7903: Increase HS400 USDHC clock speed
arm64: dts: imx8mn-venice-gw7902: Increase HS400 USDHC clock speed
arm64: dts: imx8mm-venice-gw7902: Increase HS400 USDHC clock speed
arm64: dts: imx8mm-venice-gw7901: Increase HS400 USDHC clock speed
arm64: dts: imx8mp-venice-gw702x: Increase HS400 USDHC clock speed
arm64: dts: imx8mm-venice-gw700x: Increase HS400 USDHC clock speed
arm64: dts: lx2160a-qds: add the two on-board RGMII PHYs
arm64: dts: add imx95-libra-rdk-fpsc board
arm64: dts: imx8q: add linux,cma node for imx8qm-mek and imx8qxp-mek
arm64: dts: imx8: add capture controller for i.MX8's img subsystem
arm64: dts: imx95: add jpeg encode and decode nodes
arm64: dts: imx93-phyboard-nash: Add PEB-WLBT-07 overlay
arm64: dts: imx93-phyboard-segin: Add PEB-WLBT-05 overlay
arm64: dts: imx93-phyboard-segin: Add PEB-EVAL-01 overlay
arm64: dts: imx93-phycore-som: Add RPMsg overlay
arm64: dts: freescale: tqmls10xx: Add vdd-supply for spi-nor flash
...
Link: https://lore.kernel.org/r/20250713055441.221235-4-shawnguo2@yeah.net
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux into soc/dt
SoCFPGA DTS updates for v6.17
- Fix dt_binding_check warnings
- agilex - f2s-free-clk
- stratix10 - rstmgr
- swvp - remove phy-addr, cpu1-start-addr and altr,modrst-offset
* tag 'socfpga_dts_updates_for_v6.17' of https://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux:
arm64: dts: altera: socfpga_stratix10: update internal oscillators
arm64: dts: socfpga: swvp: remove phy-addr in the GMAC node
arm64: dts: socfpga: swvp: remove cpu1-start-addr
arm64: dts: socfpga: swvp: remove altr,modrst-offset
arm64: dts: socfpga: stratix10: fix dtbs_check for rstmgr
arm64: dts: socfpga: agilex: fix dtbs_check warning for f2s-free-clk
Link: https://lore.kernel.org/r/20250712123248.16981-1-dinguyen@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux into soc/dt
arm64: tegra: Changes for v6.17-rc1
Add support for the Tegra264 SoC and the corresponding engineering
reference hardware (P3971-0089+P3834-0008).
* tag 'tegra-for-6.17-arm64-dt' of https://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
arm64: tegra: Add p3971-0089+p3834-0008 support
arm64: tegra: Add memory controller on Tegra264
arm64: tegra: Add Tegra264 support
Link: https://lore.kernel.org/r/20250711220943.2389322-7-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
|
Add device tree entries for GPUs in M-series SoCs
Reviewed-by: Alyssa Rosenzweig <alyssa@rosenzweig.io>
Reviewed-by: Sven Peter <sven@kernel.org>
Signed-off-by: Sasha Finkelstein <fnkl.kernel@gmail.com>
Link: https://lore.kernel.org/r/20250710-sgx-dt-v3-2-299bb3a65109@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Apple T2 MacBookPro15,2 (j132) has a touchbar so include the framebuffer
node.
Cc: stable@vger.kernel.org
Fixes: 4efbcb623e9bc ("arm64: dts: apple: Add T2 devices")
Signed-off-by: Nick Chan <towinchenmi@gmail.com>
Link: https://lore.kernel.org/stable/20250620-j132-fb-v1-1-bc6937baf0b9%40gmail.com
Link: https://lore.kernel.org/r/20250620-j132-fb-v2-1-65f100182085@gmail.com
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Now that the dt-binding has been extended to allow indicating the bit
position the following warning about a duplicate unit address with W=1
can be fixed:
arch/arm64/boot/dts/apple/t8103.dtsi:764.46-767.8: Warning (unique_unit_address_if_enabled): /soc/spmi@23d0d9300/pmic@f/nvmem-layout/boot-error-count@9f02: duplicate unit-address (also used in node /soc/spmi@23d0d9300/pmic@f/nvmem-layout/panic-count@9f02)
Fixes: d8bf82081c9e ("arm64: dts: apple: Add PMIC NVMEM")
Link: https://lore.kernel.org/r/20250610-nvmem-bit-pattern-v1-2-55ed5c1b369c@kernel.org
Signed-off-by: Sven Peter <sven@kernel.org>
|
|
Patches from Peter Chen <peter.chen@cixtech.com>:
Cixtech P1 (internal name sky1) is high performance generic Armv9 SoC.
Orion O6 is the Arm V9 Motherboard built by Radxa. You could find brief
introduction for SoC and related boards at:
https://radxa.com/products/orion/o6#overview
Currently, to run upstream kernel at Orion O6 board, you need to
use BIOS released by Radxa, and add "clk_ignore_unused=1" at bootargs.
https://docs.radxa.com/en/orion/o6/bios/install-bios
In this series, we add initial SoC and board support for Kernel building.
Since mailbox is used for SCMI clock communication, mailbox driver is added
in this series for the minimum SoC support.
Patch 1-2: add dt-binding doc for CIX and its sky1 SoC
Patch 3: add Arm64 build support
Patch 4-5: add CIX mailbox driver which needs to support SCMI clock protocol.
Patch 6: add Arm64 defconfig support
Patch 7-8: add initial dts support for SoC and Orion O6 board
Patch 9: add MAINTAINERS entry
* newsoc/cix-p1:
MAINTAINERS: Add CIX SoC maintainer entry
arm64: dts: cix: Add sky1 base dts initial support
dt-bindings: clock: cix: Add CIX sky1 scmi clock id
arm64: defconfig: Enable CIX SoC
mailbox: add CIX mailbox driver
dt-bindings: mailbox: add cix,sky1-mbox
arm64: Kconfig: add ARCH_CIX for cix silicons
dt-bindings: arm: add CIX P1 (SKY1) SoC
dt-bindings: vendor-prefixes: Add CIX Technology Group Co., Ltd.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
